Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 115 views

    Restoring Memory On An Excel With A Fanuc 0

    Uploaded by

    Gilson Baldo
    This document provides instructions for restoring memory on an Excel CNC machine with a Fanuc 0 control. It involves entering parameter values from records, transferring backup files to the CNC including .PAR, .DGN, .PGM, and .OFF files, and re-entering work offsets to complete the memory restoration process. The process includes multiple power cycles, entering diagnostic modes, and resetting parameters to clear alarms.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Restoring Memory On An Excel With A Fanuc 0

    Uploaded by

    Gilson Baldo
    115 views2 pages
    This document provides instructions for restoring memory on an Excel CNC machine with a Fanuc 0 control. It involves entering parameter values from records, transferring backup files to the CNC including .PAR, .DGN, .PGM, and .OFF files, and re-entering work offsets to complete the memory restoration process. The process includes multiple power cycles, entering diagnostic modes, and resetting parameters to clear alarms.

    Original Title

    Restoring Memory on an Excel With a Fanuc 0

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for restoring memory on an Excel CNC machine with a Fanuc 0 control. It involves entering parameter values from records, transferring backup files to the CNC including .PAR, .DGN, .PGM, and .OFF files, and re-entering work offsets to complete the memory restoration process. The process includes multiple power cycles, entering diagnostic modes, and resetting parameters to clear alarms.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    115 views2 pages

    Restoring Memory On An Excel With A Fanuc 0

    Uploaded by

    Gilson Baldo
    This document provides instructions for restoring memory on an Excel CNC machine with a Fanuc 0 control. It involves entering parameter values from records, transferring backup files to the CNC including .PAR, .DGN, .PGM, and .OFF files, and re-entering work offsets to complete the memory restoration process. The process includes multiple power cycles, entering diagnostic modes, and resetting parameters to clear alarms.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Automation

    Consultants Inc.
    "Sales, Service and Support for Modern Manufacturing"

    Restoring Memory on an Excel with a Fanuc 0 control


    Record all work offsets.
    Hold reset and delete key while powering up.
    Parameter button- go to parameter 900 enter parameters 900-017 from the
    record of inspection. A 000 alarm appears after entering the first parameter -go
    back to parameters and enter the values for 901. When the next alarm appears
    press delete
    Enter remainder of 900 parameters. When finished, verify that all parameters are
    entered correctly.
    Power machine down for 10 seconds then power up
    Go to parameter page #1 in MDI mode
    ISO = 1
    Inch = 1
    Page down 3 times to parameter #2
    Enter 0000 0011
    Go to parameter # 552 set to 10
    Place machine in edit mode and memory protect key off. With parameter
    screen displayed push the Input Key
    LSK should appear in the lower right corner.
    From PC transmit the Kiwa.PAR file to the CNC. The CNC LSK should change
    to INPUT. After the file is transmitted a number of alarms will appear.
    Press Delete at alarm
    Power Down/Up
    Go to diagnostic page- Verify Diagnostics is displayed in the upper left corner.

    4491 Foskuhl Rd.

    Floyds Knobs, In. 47119

    www.automacon.com

    812-923-3718 (phone)

    info@automacon.com

    812-923-5396 (fax)

    Automation
    Consultants Inc.
    "Sales, Service and Support for Modern Manufacturing"
    Hold EOB in and push input
    Transfer the Kiwa.dgn file
    When finished go back to parameters and set PWE=0. Push reset (must be in
    MDI mode)
    All alarms should be cleared
    Go to Edit mode and push the PGRM key until I/O is displayed. Push I/O then
    read. LSK will appear again.
    Transmit the Kiwa.PGM file to the CNC.
    Push offset until tool offsets are displayed.
    Press input.
    LSK will appear
    Transfer the Kiwa.off file
    Verify all offsets.
    Enter work offsets P1-P8 by hand.
    Power down
    Power up holding LQP and CANCLE key.
    Move away form home position and zero out.

    4491 Foskuhl Rd.

    Floyds Knobs, In. 47119

    www.automacon.com

    812-923-3718 (phone)

    info@automacon.com

    812-923-5396 (fax)

    You might also like