G3608 GENERATOR AND INDUSTRIAL January 1998 to Current 4WF00001-UP(SE...
Page 1 of 4
Shutdown SIS
Previous Screen Product: GAS ENGINE Model: G3608 GAS ENGINE 4WF Configuration: G3608 GENERATOR AND INDUSTRIAL January 1998 to Current 4WF00001-UP
Operation and Maintenance Manual
G3606 and G3608 Engines Media Number -SEBU6278-05
Publication Date -01/01/2005
Date Updated -13/01/2005
i02241623
Maintenance Interval Schedule - G3606 and G3608 Engines That
Have a 9.2:1 Compression Ratio and Use Wellhead or Natural Gas SMCS - 1000; 4450; 7500 Before performing any operation or maintenance procedures, ensure that the safety information, warnings, and instructions are read and understood. Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must be performed. Note: For information on generator maintenance, see the Operation and Maintenance Manual for the generator.
When Required Actuator Control Linkage - Replace Barring Device - Lubricate Cooling System Coolant Sample (Level 2) - Obtain Engine Air Cleaner Element (Single Element) - Clean/Replace Engine Air Precleaner - Clean Overhaul Considerations Valve Stem Projection - Measure/Record
Daily Air Starting Motor Lubricator Oil Level - Check Air Tank Moisture and Sediment - Drain Control Panel - Inspect Cooling System Coolant Level - Check Driven Equipment - Inspect/Replace/Lubricate Electrohydraulic System - Inspect Engine Air Cleaner Service Indicator - Inspect
