Catalogue Idlers PDF

GUANGHUAN CONVEYER IDLERS CO.
,LTD
Abstract
The idlers are very important component of belt conveyer. They are present along the entire length of
the conveyer, support the belt and moving the materials loaded on the belt. The idlers diameter could be
correctly selected comply with the belt width and travel speed. Guanghuan Conveyer Idlers Conveyer
Idlers Co., Ltd produce idlers of diameter 60mm, 63.5mm, 76mm, 89mm, 108mm, 114mm,
127mm, 133mm, 140mm, 159mm, 165mm, 178mm, 194mm, 219mm,almost covers all kind belt width
requirement. The correct idler length could be selected according to belt width and rollers type. General
steel idlers are consist of idler shell, spindle, bearing, bearing house, seals equipment and axial fixed unites.
All Guanhuan idlers are precision assembled and carefully fitted. It advanced structural and producing
program makes sure guanghuan idlers with maxim load ability and service life.
1.1 Idlers identify

The idlers can be identified in two types carrying idlers and return idlers.
carrying idlers include
:trough idlers,
.
trainer idlers,.
impact idlers,.
self aligned idlers.
return idlers include:
flat single idlers,
VEE Type return idlers,
Cleaning type return idlers
Trough idlers:
A trough idler, which is the most common idlers
used on high capacity belt conveyer, is mounted
on the carrying side. General consist of 3 equal
length rollers. The two out rollers are inclined
upward and the middle one is horizontal. The
inclined degree can be 30,35and 45, some
rollers can up to 60in suspend type There are
two kinds of basic type : standard type and ahead
inclined type. The latter can also be present all
through the conveyer to prevent the belt from
sideslip.
GUANGHUAN CONVEYER IDLERS CO.,LTD

Trainer idlers
the trainer idlers were fixed between the
end drums and trough idlers, reducing the
tension on belt edge and prevent the
materials from falling off the belt. The two
out idlers incline degree general be 10,20
and 30.
Impact idlers
impact idlers with rubber rings of high shock
absorbing quantity, fixed under the feed system.
The rubber rings would absorbing the impact by
falling materials so that prevent the belt and
idler body from damaging.
Self-centering idles
It was adopted to prevent the belt from
sideslip, it can be identified two types:
friction type and cone type by their working
way or carrying centering type and return
type by their working point. In most
conditions, there are 1 set of carrying
centering idlers in every 10 sets of carrying
idlers, and 1 set of return centering idlers in
4~6 sets of return idlers.
Flat return idlers:

They are adopt to support the conveyer .
belt on return side
VEE type return idlers:
vee return idlers also used to support the
conveyer belt on return side and preventthe belt
from sideslip . they can identified follow types:
V type return idlers; V type ahead inclined type;
V type back inclined. General speaking, they
are fixed on the return side at rate of 4/6 to flat
return idlers.

Self cleaning idlers
Self cleaning idlers are fixed on the return
side of the conveyer to cleaning off the
material adhere to the belt working surface.
They could be identified as following types:
flat comb type, V comb type and flat spiral
type. General speaking, 1set of spiral idlers
would be set closed to the end durm and 5~6
sets of comb type return idlers followed.
1.2 The choice of idlers diameter and idler rotate rate.

The idlers diameter should be select according to the belt width and the belt travel speed.
Their relationship see sheet 1. The idlers rotate rate in different belt width see sheet 2. General
speaking, The idler roll rate should be kept no more than 600r/min.
Sheet 1
Belt width
Idler dia
500
650
800
1000
1200
1400
89mm
133mm
159mm
108mm
1600
1800
2000
194mm
2200
2400
6.5
219mm
Sheet 2
I dlerdia
Belt
speed
m/s
mm
0.8
1.25
1.6
2.5
89
172
215
268
344
429
537
108
142
177
221
283
354
442
557
133
144
180
230
287
359
453
575
159
120
150
192
240
300
379
481
601
123
158
197
246
310
394
492
275
349
436
194
219
3.15
567

1.3 The space between idlers
The space between idlers should be comply with two conditions : lading ability of single roller
and the maxim sag of conveyer belt. The pace set must considering the belt tension so that make
sure a reasonable belt sag. The maxim belt sag can be calculated by the following method:
Max sag: hmax= g(qG+qB)a/8F0
Hmax Max sag
qG Material weight
qB---- Conveyer belt weight
a . Space between idlers
F0
Tension of conveyer belt
m
kg/m
kg/m
m
N
The space between idlers are list in sheet 3 for customers to reference.
Density
Belt width mm
Kg/m3
500650 8001000 12001400 1600180020002200
Space
mm
1600
1200
1200
1200
1000
>1600
1000
1000
1000
1000
The space between return idlers is about 2.4m~3m.

The space between idlers that under the protruding stage should be 1/2 of carrying idlers.
The space between idlers of feed point, is depends on the density, volume and falling height.
General speaking, it was 1/2 ~ 1/3 of carrying idlers. If the material volumes is very big and falling
height is high, the space can be 1.2 ~1.5 times of the idlers diameter.
The minimal space between head pulley and first set of idlers can refer sheet 4 and
picture: sp1
Belt type
Tension %
EP belt
Steel core belt
>90
1.6B
3.4B
60-90
1.3B
2.6B
<60
1.0B
1.8B
picture sp1
1.4 Inside structure .
Guanghuan idlers are consist of Idler shell, spindle, bearing, bearing house, seals equipment and
axial clip.
Seals:
Guanghuan idlers adopt untouched multi labyrinth seal structure, a complex, bend and
narrowed labyrinth channel was formed between the inner seal and out seal. The channel is filled
with grease. Precision designed and manufactured labyrinth seals is our production symbolize. Its
perfect water proof, dust proof and wear resistance protect the bearing from being damaged
effectively. Test result of State Quality Supervision and Inspection Center for Coal Mining Machinery
shown Guanghuan idlers not only have outstanding water proof , dust proof , but also running
smoothly.
Bearing
Guanghuan idlers choose C3 serials idler ball bearings, adopt double sealed structure to improve the
water and dust proof ability.
Idler shell, spindle and bearing house
The idler pipe and spindle that Guanghuan idlers adopt all comply with industry standard. The
T
I
R, roundness and straightness and outline dimension comply with high class requirement.
The bearing house are stamped by good quality steel, weld to idlers shell by automatic machine
hand precision that make sure of the whole strength of the idlers.
The calculation of how to select idler diameter
The choice of carrying idlers and return idlers depends on many factors such as belt width, belt
travel speed , space between idlers , dynamic loading and static load .
The bearing is a key issue connected with idlers life as it is depends on bearing working life. So
the idlers load ability is decided by the correctly choice of bearing. Sheet 9 is recommend for
customers to find the correctly bearing type.

Load calculate
carrying idler : P0=exaox(Im/V+Qb)*9.8
P0 carrying idler static load
1).static load
ao---space between carrying idlers ,m

e-
Return
idler:
--load rate see
sheet
Qb belt quality in one meter
kg/m
Im carrying ability
Kg/S
V belt travel speed
Pu=exauxqB*9.8
Pu return idler , static load ,
au space between return idlers

2). dynamic
load
,m
P0= P0 x fs x fd x faPu=Puxfsxfa
carrying idler:
P0-- carrying idlers dynamic load
P0-- return idlers dynamic load
fs operation rate see sheet 6

fs impact rate
see sheet 7
fs condition rate
see sheet 8
working out the static load and dynamic load, the bigger one should be considered to select correctly
bearing type reference sheet 9. In this way, the load ability could be over or equal to the theory data. So
that the idler bearings service life can be up to 500000 hours.
Sheet 5 load rate
Sheet 6
Idler type
Single flat
rollers
V type double rollers
Sheet 7
Running typehours/ day
fs
<6
0.8
1
0.63
Trough 3 rollers
running rata
0.8
6-9
>9-16
1.1
>16
1.2
impact rata fd
Material diameter mm
Belt travel speed ,m/s

2
2.5
3.15
3.5
6.5
0-100
>100-150
1.02
1.03
1.06
1.07
1.09
1.13
1.23
>150-300 some big granule mixed
1.04
1.06
1.11
1.12
1.16
1.24
1.36
>150-300 big agglomeration mixed
1.06
1.09
1.14
1.16
1.21
1.35
1.57
>150-300
1.2
1.32
1.57
1.7
1.9
2.3
2.94
Sheet 8
condition rate
Working condition
fs
In normal condition and maintain
Wearing materials
1.1
High wearing
1.15

Sheet 9
idler extreme load ability (10,service life: 50000hs) Unit : KN

6204ZZ bearing
Length mm Belt speedm/s
160
200
250
315
380
6205ZZ
Idler diameter mm
bearing
6305ZZ
Dia mm
76
89
108
89
0.8
3.03
3.19
3.49
2.81
2.96
2.24
1.25
2.61
2.75
3.01
1.6
2.40
2.53
2.77
2.23
2.35
2.57
2.5
2.07
2.18
2.39
3.15
1.92
2.02
Dia
bearing
mm
108
133
159
108
133
159
2.21
0.8
3.19
3.41
3.49
3.73
3.99
4.42
5.64
6.05
6.42
2.96
3.16
3.24
3.46
3.71
3.93
5.24
5.61
5.96
1.25
2.75
2.93
3.01
3.21
3.44
3.65
4.86
5.21
5.53
1.6
2.53
2.70
2.77
2.96
3.17
3.36
4.48
4.80
5.09
2.18
2.51
2.57
2.74
2.94
3.12
4.16
4.45
4.73
2.5
2.02
2.33
2.39
2.55
2.73
2.90
3.86
4.14
4.39
3.15
2.67
2.16
2.21
2.36
2.53
2.68
3.57
3.83
4.06
0.8
2.67
2.67
3.46
3.73
3.99
4.24
5.64
5.99
5.99
2.67
2.67
3.24
3.46
3.71
3.93
5.24
5.61
5.96
1.25
2.53
2.67
3.01
3.21
3.44
3.65
4.86
5.21
5.53
1.6
2.53
2.67
2.77
2.96
3.17
3.36
4.48
4.80
5.09
2.18
2.51
2.57
2.74
2.94
3.12
4.16
4.45
4.73
2.5
2.02
2.33
2.39
2.55
2.73
2.90
3.86
4.14
4.39
3.15
1.87
2.16
2.21
2.36
2.53
2.68
3.57
3.83
4.06
1.80
1.99
2.04
2.18
2.33
2.48
3.30
3.54
3.75
4.5
1.73
1.92
1.96
2.09
2.25
2.38
3.17
3.40
3.61
1.67
1.85
1.90
2.02
2.17
2.30
3.06
3.28
3.48
5.6
1.59
1.78
1.83
1.95
2.09
2.22
2.95
3.16
3.35
6.5
1.99
1.69
1.74
1.85
1.99
2.11
2.81
3.01
3.19
0.8
1.99
1.99
3.49
3.73
3.99
4.24
4.41
4.41
4.41
1.99
1.99
3.24
3.46
3.74
3.93
4.41
4.41
4.41
1.25
1.99
1.99
3.01
3.21
3.44
3.65
4.41
4.41
4.41
1.6
1.99
1.99
2.77
2.96
3.17
3.36
4.41
4.41
4.41
1.99
1.99
2.57
2.74
2.94
3.12
4.16
4.41
4.41
2.5
1.99
1.99
2.39
2.55
2.73
2.90
3.86
4.14
4.39
3.15
1.99
1.99
2.21
2.36
2.53
2.68
3.57
3.83
4.06
1.87
1.99
2.04
2.18
2.33
2.48
3.30
3.54
3.75
4.5
1.80
1.92
1.96
2.09
2.25
2.38
3.17
3.40
3.61
1.73
1.85
1.90
2.02
2.17
2.30
0.06
328.00
3.48
5.6
1.67
1.78
1.83
1.95
2.09
2.22
2.95
3.16
3.35
6.5
1.59
1.69
1.74
1.85
1.99
2.11
2.81
3.01
3.19
0.8
1.59
1.59
3.49
3.59
3.59
3.59
3.49
3.49
3.49
1.59
1.59
3.24
3.46
3.59
3.59
3.49
3.49
3.49
1.25
1.59
1.59
3.01
3.21
3.44
3.59
3.49
3.49
3.49
1.6
1.59
1.59
2.77
2.96
3.17
3.36
3.49
3.49
3.49
1.59
1.59
2.57
2.74
2.94
3.12
3.49
3.49
3.49
2.5
1.59
1.59
2.39
2.55
2.74
2.90
3.49
3.49
3.49
3.15
1.59
1.59
2.21
2.36
2.53
2.68
3.49
3.49
3.49
1.59
1.59
2.04
2.18
2.53
2.48
3.30
3.49
3.49
4.5
1.59
1.59
1.96
2.09
2.25
2.38
3.17
3.40
3.49
1.59
1.59
1.90
2.02
2.17
2.30
3.06
3.28
3.48
5.6
1.59
1.59
1.83
1.95
2.09
2.22
2.95
3.16
3.35
6.5
1.59
1.59
1.74
1.85
1.99
2.11
2.81
3.01
3.19

Sheet 9
Length
Belt
mm
speed m/s
6206ZZ bearing
6306ZZbearing
6207ZZ bearing
6307ZZ bearing
6308ZZ bearing
diameter mm
diameter mm
Diameter mm
Diameter mm
Diameter mm
194
159
108
133
159
108
133
159
159
0.8
5.19
5.56
5.90
7.10
7.61
8.08
7.78
10.14
4.82
5.16
5.48
6.59
7.07
7.50
7.22
9.41
1.25
4.47
4.79
5.09
6.12
6.56
6.96
6.70
8.74
1.6
4.12
4.41
4.68
5.64
6.04
6.41
6.17
8.05
3.82
4.10
4.35
5.23
5.61
5.95
5.73
7.74
2.5
3.55
3.80
4.04
4.86
5.21
5.53
5.32
6.94
3.15
3.29
3.52
3.74
4.50
4.82
5.12
4.93
9.42
0.8
5.19
5.56
5.90
7.10
7.61
8.08
7.78
10.14
0.8
1
1.25
160
1.6
2
2.5
3.15
200
250
315
380
4.82
5.16
5.48
6.59
7.07
7.50
7.22
9.41
1.25
4.47
4.79
5.09
6.12
6.56
6.96
6.70
8.74
1.6
4.12
4.41
4.68
5.64
6.04
6.41
6.17
8.05
3.82
4.10
4.35
5.23
5.61
5.95
5.73
7.47
2.5
3.55
3.80
4.04
4.86
5.21
5.53
5.32
6.94
3.15
3.29
3.52
3.74
4.50
4.82
5.12
4.93
6.42
3.03
3.25
3.45
4.15
4.45
4.73
4.55
5.93
4.5
2.92
3.13
3.32
3.99
4.28
4.45
4.37
5.70
2.82
3.02
3.20
3.86
4.13
4.39
4.22
5.50
5.6
2.71
2.91
0.09
3.71
3.98
4.22
4.07
5.30
6.5
2.58
2.77
2.94
3.53
3.79
4.02
3.87
5.04
0.8
5.19
5.56
5.90
7.10
7.61
8.08
7.78
10.14
4.82
5.16
5.48
6.59
7.07
7.50
7.22
9.41
1.25
4.47
4.79
5.09
6.12
6.65
6.96
3.70
8.74
1.6
4.12
4.41
4.68
5.64
6.04
6.41
3.17
8.05
3.82
4.10
4.35
5.23
5.61
5.95
5.73
7.47
2.5
3.55
3.80
4.04
4.86
5.21
5.53
5.32
6.94
3.15
3.29
3.52
3.74
4.50
4.82
5.12
4.93
6.42
3.03
3.25
3.45
4.15
4.45
4.73
4.55
5.93
4.5
2.92
3.13
3.32
3.99
4.28
4.54
4.37
5.70
2.82
3.02
3.20
3.86
4.13
4.39
4.22
5.50
5.6
2.71
2.91
3.09
3.71
3.98
4.22
4.07
5.30
6.5
2.58
2.77
2.94
3.53
3.79
4.02
3.87
5.04
0.8
5.19
5.56
5.90
7.10
7.31
7.31
7.78
10.14
4.82
5.16
5.48
6.59
7.07
7.31
7.22
9.41
1.25
4.47
4.79
5.09
6.12
6.56
6.96
6.70
8.74
1.6
4.12
4.41
4.68
5.64
6.04
6.41
6.17
8.05
3.82
4.10
4.35
5.23
5.61
5.95
5.73
7.47
2.5
3.55
3.80
4.04
4.86
5.21
5.53
5.32
6.94
3.15
3.29
3.52
3.74
4.50
4.82
5.12
4.93
6.42
3.03
3.25
3.45
4.15
4.45
4.73
4.55
5.93
4.5
2.92
3.13
3.32
3.99
4.28
4.54
4.37
5.70
2.82
3.02
3.20
3.86
4.13
4.39
4.22
5.50
5.6
2.71
2.91
3.09
3.71
3.98
4.22
4.07
5.30
6.5
2.58
2.77
2.04
3.53
3.79
4.02
3.87
5.04
194
159
194

Sheet 9

6204ZZ bearing
Belt
Length mm
speedm/s
465
500
530
600
670
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
200
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5-6.5
76
1.16
1.16
1.16
1.16
1.16
1.16
1.16
Idler diameter mm
89
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.16
1.16
1.16
1.16
1.16
1.16
1.16
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
6205ZZ
108
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.08
1.08
1.08
1.08
1.08
1.08
1.08
1.08
1.08
1.08
1.08
1.08
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.83
0.83
89
2.82
2.82
2.82
2.77
2.57
2.39
2.21
2.04
1.96
1.9
1.83
1.74
2.6
2.6
2.6
2.6
2.57
2.39
2.21
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.04
1.96
1.9
1.83
1.74
bearing
6305ZZ
Dia mm
108
133
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.74
2.82
2.55
2.73
2.36
2.53
2.18
2.33
2.09
2.25
2.02
2.17
1.95
2.09
1.85
1.99
159
2.82
2.82
2.82
2.82
2.82
2.82
2.68
2.48
2.38
2.3
2.22
2.11
2.43
2.43
2.43
2.43
2.43
2.43
2.36
2.18
2.09
2.02
1.95
1.85
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.09
2.02
1.95
1.85
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.38
2.3
2.22
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.33
2.25
2.17
2.09
1.99
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.09
1.99
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
bearing
108
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
Dia mm
133
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
159
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.82
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.43
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
2.11
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
1.87
10

Sheet 9
Belt
6206ZZ bearing
6306ZZbearing
6207ZZ bearing
6307ZZ bearing
6308ZZ bearing
Length
diameter mm
speed
diameter mm
Diameter mm
Diameter mm
Diameter mm
mm
465
530
600
670
m/s
108
133
159
108
133
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
200
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
5.19
4.82
4.47
4.12
3.82
3.55
3.29
3.03
2.92
2.82
2.71
2.58
4.85
4.82
4.47
4.12
3.82
3.55
3.29
3.03
2.92
2.82
2.71
2.58
4.21
4.21
4.21
4.12
3.82
3.55
3.29
3.03
2.92
2.82
2.71
2.58
3.72
3.72
3.72
3.72
3.72
3.55
3.29
3.03
2.92
2.82
2.71
2.58
5.56
5.16
4.79
4.41
4.10
3.80
3.52
3.25
3.13
3.02
2.91
2.77
4.85
4.85
4.79
4.41
4.10
3.80
3.52
3.25
3.13
3.02
2.91
2.77
4.21
4.21
4.21
4.21
4.10
3.80
3.52
3.25
3.13
3.02
2.91
2.77
3.72
3.72
3.72
3.72
3.72
3.72
3.52
3.25
3.13
3.02
2.91
2.77
5.64
5.48
5.09
4.68
4.35
4.04
3.74
3.45
3.32
3.20
3.09
2.94
4.85
4.85
4.85
4.68
4.35
4.04
3.74
3.45
3.32
3.20
3.10
2.94
4.21
4.21
4.21
4.21
4.21
4.04
3.74
3.45
3.32
3.20
3.09
2.94
3.72
3.72
3.72
3.72
3.72
3.72
3.72
3.45
3.32
3.20
3.09
2.94
5.75
5.75
5.75
5.64
5.23
4.86
4.50
4.15
3.99
3.86
3.71
3.53
4.94
4.94
4.94
4.94
4.94
4.86
4.50
4.15
3.99
3.86
3.71
3.53
4.29
4.29
4.29
4.29
4.29
4.29
4.29
4.15
3.99
3.86
3.71
3.53
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.71
3.53
5.75
5.75
5.75
5.75
5.61
5.21
4.82
4.45
4.28
4.13
3.98
3.79
4.94
4.94
4.94
4.94
4.94
4.94
4.82
4.45
5.28
4.13
3.98
3.79
4.29
4.29
4.29
4.29
4.29
4.29
4.29
4.29
4.28
4.13
3.98
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
159
5.75
5.75
5.75
5.75
5.75
5.53
5.12
4.73
4.54
4.39
4.22
4.04
4.94
4.94
4.94
4.94
4.94
4.94
4.94
4.73
4.54
4.39
4.22
4.02
4.29
4.29
4.29
4.29
4.29
4.29
4.29
4.29
4.29
4.29
4.22
4.02
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
3.79
159
7.78
7.22
6.70
6.17
5.73
5.32
4.93
4.55
4.37
4.22
4.07
3.87
7.78
7.22
6.70
6.17
5.73
5.32
4.93
4.55
4.37
4.22
4.07
3.87
7.54
7.22
6.70
6.17
5.73
5.32
4.93
4.55
4.37
4.22
4.07
3.87
6.66
6.66
6.66
6.17
5.73
5.32
4.93
4.55
4.37
4.22
4.07
3.87
194
159
194
159
194
8.31
7.72
7.16
6.6
6.12
5.69
5.26
4.86
4.67
4.51
4.35
4.13
7.54
7.54
7.16
6.6
6.12
5.69
5.26
4.86
4.67
4.51
4.35
4.13
6.66
6.66
6.66
6.6
6.12
5.69
5.26
4.86
4.67
4.51
4.35
4.13
9.77
9.41
8.74
8.05
7.47
6.94
6.42
5.93
5.70
5.50
5.30
5.04
8.38
8.38
8.38
8.05
7.47
6.94
6.42
5.93
5.70
5.50
5.30
5.04
7.27
7.27
7.27
7.27
7.27
6.94
6.42
5.93
5.70
5.50
5.30
5.04
6.42
6.42
6.42
6.42
6.42
6.42
6.42
5.93
5.70
5.50
5.30
5.04
8.38
8.38
8.38
8.38
7.98
7.41
6.86
6.34
6.09
5.88
5.66
5.39
7.27
7.27
7.27
7.27
7.27
7.27
6.86
6.34
6.09
5.88
5.66
5.39
6.42
6.42
6.42
6.42
6.42
6.42
6.42
6.34
6.09
5.88
5.66
5.39
12.32
11.44
10.62
9.78
9.08
8.43
7.80
7.20
6.93
6.96
6.44
6.13
12.19
11.44
10.62
9.78
9.08
8.43
7.80
7.20
3.93
6.69
6.44
6.13
10.76
10.76
10.62
9.78
9.08
8.43
7.80
7.20
6.93
6.69
6.44
6.13
13.16
12.22
11.34
10.45
9.70
9.00
8.34
7.70
7.40
7.15
6.88
6.55
12.19
12.19
11.34
10.45
9.70
9.00
8.34
7.70
7.40
7.15
6.88
6.55
10.76
10.76
10.76
10.45
9.70
9.00
8.34
7.70
7.40
7.15
6.88
6.55

Sheet 9
Length mm
700
750
800
900
Belt
speedm/s
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
6204ZZ bearing
Idler diameter mm
76
89
108
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.74
0.69
0.69
0.69
0.69
0.69
0.69
0.69
0.69
0.69
0.69
0.69
0.69
6205ZZ
bearing
6305ZZ
Dia mm
89
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
108
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
133
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
159
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
108
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
bearing
Dia mm
133
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
159
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.65
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.54
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
1.35
11
12

Sheet 9
Belt
Length
mm
700
750
800
900
6206ZZ bearing
6306ZZbearing
diameter mm
speed
6207ZZ bearing
diameter mm
Diameter mm
m/s
108
133
159
108
133
159
159
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
3.54
3.54
3.54
3.54
3.54
3.54
3.29
3.03
2.92
2.82
2.71
2.58
3.28
3.28
3.28
3.28
3.28
3.28
3.28
3.03
2.92
2.82
2.71
2.58
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.06
2.92
2.82
2.71
2.58
3.54
3.54
3.54
3.54
3.54
3.54
3.52
3.25
3.13
3.02
2.91
2.77
3.28
3.28
3.28
3.28
3.28
3.28
3.28
3.25
3.13
3.02
2.91
2.77
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.02
2.91
2.77
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
3.54
3.54
3.54
3.54
3.54
3.54
3.54
3.42
3.32
3.2
3.09
2.94
3.28
3.28
3.28
3.28
3.28
3.28
3.28
3.28
3.28
3.20
3.09
2.94
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.06
3.06
2.94
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
2.69
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.53
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.61
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.35
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
3.12
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.69
2.69
2.75
2.75
6.5
6307ZZ bearing
Diameter mm
6308ZZ bearing
Diameter mm
194
159
194
159
194
6.34
6.34
6.34
6.17
5.73
5.32
4.93
4.55
4.37
4.22
4.07
3.87
5.88
5.88
5.88
5.88
5.73
5.32
4.93
4.55
4.37
4.22
4.07
3.87
5.47
5.47
5.47
5.47
5.47
5.32
4.93
4.55
4.37
4.22
4.07
3.87
4.82
4.82
4.82
4.82
4.82
4.82
4.82
4.55
4.37
4.22
4.07
5.88
5.88
5.88
5.88
5.88
5.69
5.26
4.86
4.67
4.51
4.35
4.13
5.47
5.47
5.47
5.47
5.47
5.47
5.26
4.86
4.67
4.51
4.35
4.13
4.82
4.82
4.82
4.82
4.82
4.82
4.82
4.82
4.67
4.51
4.35
6.11
6.11
6.11
6.11
6.11
6.11
6.11
5.93
5.70
5.50
5.30
5.04
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.50
5.30
5.04
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.04
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.66
5.39
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
5.27
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
4.63
9.48
9.48
9.48
9.48
9.08
8.43
7.80
7.20
6.93
6.69
6.44
6.13
8.83
8.83
8.83
8.83
8.83
8.43
7.80
7.20
6.93
6.69
6.44
6.13
7.76
7.76
7.76
7.76
7.76
7.76
7.76
7.20
6.93
6.69
6.44
9.48
9.48
9.48
9.48
9.48
9.00
8.34
7.70
7.40
7.15
6.88
6.55
8.83
8.83
8.83
8.83
8.83
8.83
8.83
7.70
7.40
7.15
6.88
6.55
7.76
7.76
7.76
7.76
7.76
7.76
7.76
7.70
7.40
7.15
6.88
3.87
4.13
4.63
4.63
6.13
6.55

Sheet 9
Length mm
950
1000
Belt
speedm/s
6204ZZ bearing
6205ZZ
0.8
Idler diameter mm
76
89
108
0.57
0.57
bearing
6305ZZ
89
1.28
Dia mm
108
133
1.28
1.28
159
1.28
bearing
108
1.28
Dia mm
133
1.28
159
1.28
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.25
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.6
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
2
2.5
3.15
4
4.5
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
1.28
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
5.6
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
6.5
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
0.8
1
1.25
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.6
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
2.5
1.21
1.21
1.21
1.21
3.15
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
4.5
1.21
1.21
1.21
1.21
1.21
1.21
1.21
1.21
5.6
1.21
1.21
1.21
1.21
6.5
1.21
1.21
1.21
1.21
5
5.6
6.5
0.8
1
1.25
1.6
2
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
0.8
1
1.25
1.6
2
1050
2.5
3.15
4
4.5
1100
2.5
1.09
1.09
1.09
1.09
3.15
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
4.5
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
5.6
6.5
1.09
1.09
1.09
1.09
1.09
1.09
1.09
1.09
13
14

Sheet 9

Belt
6206ZZ bearing
6306ZZbearing
6207ZZ bearing
6307ZZ bearing
6308ZZ bearing
Length
diameter mm
speed
diameter mm
Diameter mm
Diameter mm
Diameter mm
mm
950
1000
1050
1100
m/s
108
133
159
108
133
159
159
194
159
194
159
194
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
0.8
1
1.25
1.6
2
2.5
3.15
4
4.5
5
5.6
6.5
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.54
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.40
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.59
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.45
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.17
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
2.21
4.54
4.54
4.54
4.54
4.54
4.54
4.54
4.54
4.37
4.22
4.07
3.87
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.22
4.07
3.87
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.07
3.87
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
4.54
4.54
4.54
4.54
4.54
4.54
4.54
4.54
4.54
4.51
4.35
4.13
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.30
4.13
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
4.08
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
3.88
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.37
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
4.13
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.92
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
3.73
7.31
7.31
7.31
7.31
7.31
7.31
7.31
7.20
6.93
6.69
6.44
6.13
6.92
6.92
6.92
6.92
6.92
6.92
6.92
6.92
6.92
6.69
6.44
6.13
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.44
6.13
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
7.31
7.31
7.31
7.31
7.31
7.31
7.31
7.31
7.31
7.15
6.88
6.55
6.92
6.92
6.92
6.92
6.92
6.92
6.92
6.92
6.92
6.92
6.88
6.55
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.56
6.55
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24
6.24

Sheet 9

6204ZZ bearing
Belt
speedm/s
Length mm
6205ZZ
Idler diameter mm
76
bearing
6305ZZ
Dia mm
Dia
133
159
0.57
0.57
1.28
1.28
1.28
1.28
1.28
1.28
1.28
0.47
0.47
1.04
1.04
1.04
1.04
1.04
1.04
1.04
0.95
0.95
0.95
0.95
1150
1400
1500
1600
1700
1800
108
89
108
133
159
108
mm
1120
1250
89
bearing
0.38
0.85
0.85
0.85
0.85
0.85
0.85
0.33
0.74
0.74
0.74
0.74
0.74
0.74
0.65
0.65
0.65
0.65
2000
0.58
0.58
0.58
0.58
2200
0.53
0.53
0.53
0.53
2500
0.46
0.46
0.46
0.46
2800
3000
3150
3350
Sheet 9
Belt
6206ZZ bearing
6306ZZbearing
6207ZZ bearing
6307ZZ bearing
6308ZZ bearing
speed
diameter mm
diameter mm
Diameter mm
Diameter mm
Diameter mm
Length
mm
m/s
108
133
159
108
133
159
159
194
159
194
159
194
1120
2.54
2.54
2.54
2.59
2.59
2.59
3.81
3.81
3.66
3.66
6.12
6.12
1150
2.07
2.07
2.07
2.11
2.11
2.11
3.7
3.7
3.56
3.56
5.95
5.95
1250
1.89
1.89
1.93
1.93
3.39
3.39
3.26
3.26
5.45
5.45
1400
1.68
1.68
1.72
1.72
3.01
3.01
2.89
2.89
4.83
4.83
1500
1.6
2.8
2.8
2.68
2.68
4.49
4.49
1600
1.49
2.61
2.61
2.51
2.51
4.2
4.2
1700
2.45
2.45
2.35
2.35
3.94
3.94
1800
1.29
1.29
1.32
1.32
2.31
2.31
2.22
2.22
3.71
3.71
2000
1.16
1.16
1.18
1.18
2.07
2.07
1.99
1.99
3.32
3.32
2200
1.05
1.05
1.07
1.07
1.88
1.88
1.8
1.8
3.01
3.01
2500
0.92
0.92
0.94
0.94
1.65
1.65
1.58
1.58
2.64
2.64
2800
0.82
0.84
1.47
1.47
1.4
1.4
2.35
2.35
3000
0.76
0.78
1.37
1.37
1.31
1.31
2.19
2.19
3150
1.3
1.3
1.25
1.25
2.08
2.08
3350
1.22
1.22
1.17
1.17
1.95
1.95
1.68
1.72
1.56
1.46
1.46
1.46
1.49
1.49
15
16

2. Idlers
2.1 trough idlers 30, 35, 45
CZ(F)-XX-XXX-XXX-XXX---------------------------------bearing No.
---------------------------------idler diameter
---------------------------------belt width
-------------------------trough degree
-----CZ trough idlers Fmarket of ahead inclined type
standard type
B.W
TYPE
500 -050-89-204
-065-89-204
-065-89-205
650 -060-108-204
-065-108-205
-065-108-305
-080-89-204
-080-89-205
800 -080-108-204
-080-108-205
-080-108-305
-100-108-205
-100-108-305
-100-108-206
1000 -100-108-306
-100-133-205
-100-133-305
-100-133-206
-100-133-306
-120-108-205
-120-108-305
-120-108-206
-120-108-306
-120-133-205
1200 -120-133-305
-120-133-206
-120-133-306
-120-159-205
-120-159-305
-120-159-206
-120-159-306
-140-108-205
-140-108-305
-140-108-206
-140-108-306
-140-133-205
1400 -140-133-305
-140-133-206
-140-133-306
-140-159-205
-140-159-305
-140-159-206
-140-159-306
IDLER
IDLER SIZE
PG -89-204-200
PG -89-204-250
PG -89-204-250
PG -108-204-250
PG -108-205-250
PG -108-305-250
PG -89-204-315
PG -89-205-315
PG -108-204-315
PG -108-205-315
PG -108-305-315
PG -108-205-380
PG -108-305-380
PG -108-206-380
PG -108-306-380
PG -133-205-380
PG -133-305-380
PG -133-206-380
PG -133-306-380
PG -108-205-465
PG -108-305-465
PG -108-206-465
PG -108-306-465
PG 133-205-465
PG -133-305-465
PG -133-206-465
PG -133-306-465
PG -159-205-465
PG -159-305-465
PG -159-206-465
PG -159-306-465
PG -108-205-530
PG -108-305-530
PG -108-206-530
PG -108-306-530
PG -133-205-530
PG -133-305-530
PG -133-206-530
PG -133-306-530
PG -159-205-530
PG -159-305-530
PG -159-206-530
PG -159-306-530
L
200
89
250
108
89
315
108
108
380
133
108
133 465
159
108
133 530
159
bearin
g
6204
6204
205
204
205
305
204
205
204
205
304
205
304
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
A
740
800 220
235
890
950
265
245
115
1090
0
270
300
1290
135
0
325
335
1540
160
360
0
390
350
1740
180
380
0
410
ahead inclined
H2
Weight Kg
H1
P
Q
D
30 35 45
30 35 45
135.5 286 300 328 170 130 M12 15.2 15.6 16.3
17.4 17.5 18.1
135.5 311 329 364
19.1 19.2 19.8
170 130 M12 19.9 20.2 20.9
146
330 346 381
21.6 21.9 22.7
23.1 23.4 24.1
22.6 22.6 23.2
135.5 350 366 410
24.4 24.4
25
170 130 M12 25.5 25.5 26.4
146
371 385 427
27.5 27.6 28.4
29
29
29.8
39.8 39.8 42.4
41.2 41.3 43.9
159
417 437 487
43.3 43.3
46
220 170 M16 44.5 44.5 47.5
43.9 43.9 46.8
44.8 44.8 47.8
173.5 442 462 515
46.9 46.9 49.9
48.1 48.1 51.1
52.8
53
56.1
54.3
54.5
57.5
176
476 503 564
56.8
57
60
58
58.2 61.2
57.6 57.7 60.9
190.5 501 528 592 260 200 M16 58.6 58.6 61.9
61.2 61.3 64.7
62.4 62.5 65.9
65
65.6 68.7
66
66.6 69.7
207.5 529 557 518
68.6 69.1 72.2
69.8 70.3 73.4
58.9 58.9 7.05
60.4 60.4 71.9
184
516 548 518
63.3 63.3 74.8
64.5 64.5
76
64.2 64.2 75.8
198.5 541 573 646 280 220 M16 65.1 65.1 76.8
68.1 68.4 79.8
69.3 69.6
81
80.3
81
85.8
81.3
85
86.8
215.5 570 603 672
84.2 84.8 89.7
85.4
86
90.9

2.1 trough idlers 30, 35, 45
CZ(F)-XX-XXX-XXX-XXX---------------------------------bearing No.
---------------------------------idler diameter
---------------------------------belt width
-------------------------trough degree
-----CZ trough idlers Fmarket of ahead inclined type
standard type
IDLER
B.W TYPE
1600
1800
2000
2200
-160-133-205
-160-133-305
-160-133-206
-160-133-306
-160-159-205
-160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-180-133-205
-180-133-305
-180-133-206
-180-133-306
-180-159-205
-180-159-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-200-133-205
-200-133-305
-200-133-206
-200-133-306
-200-133-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307
-200-194-308
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
-220-194-207
-220-194-307
-220-194-308
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
IDLER SIZE
-133-205-600
-133-305-600
-133-206-600
-159-306-600
-159-205-600
-159-305-600
-159-206-600
-159-306-600
-159-207-600
-159-307-600
-159-308-600
-133-205-670
-133-305-670
-133-206-670
-133-306-670
-159-205-670
-159-305-670
-159-206-670
-159-306-670
-159-207-670
-159-307-670
-159-308-670
-133-205-750
-133-305-750
-133-206-750
-133-306-750
-133-305-750
-159-206-750
-159-306-750
-159-207-750
-159-307-750
-159-308-750
-194-207-750
-194-307-750
-194-308-750
-159-206-800
-159-306-800
-159-207-800
-159-307-800
-159-308-800
-194-207-800
-194-307-800
-194-308-800
133
159
133
159
133
159
194
159
194
BEAR
L ING
205
305
206
306
205
600 305
206
306
207
307
308
205
305
206
306
205
670 305
206
306
207
307
308
205
305
206
306
305
206
750 306
207
307
308
207
307
308
206
306
207
307
800
308
207
307
308
H1
H2
30 35 45 30 35 45
ahead inclined
Q
425 325 213 213 607 629 721
1980 2050
300 240 M16

450 247 226 226 630 653 734
440 232 213 213 639 670 770
2180 2250
340 270 M16

465 245 226 226 663 693 783
470 248 223 223 694 725 828
2420 2500
495 258 236 236 718 749 850
340 270 M16
530 278 253 253 753 783 884
515 264 236 236 750 778 885

2720 2800
340 270 M16
550 280 253 253 783 812 920
quantityKg
30
100
101
104
105
105
105
106
110
114
116
123
109
110
113
114
119
120
123
124
129
131
138
128
129
133
134
146
150
151
156
158
166
188
191
198
162
164
165
171
179
203
205
213
35 45
100 102
101 103
104 107
105 108
109 112
110 112
110 113
115 117
118 21
121 123
127 130
109 114
110 115
114 119
115 120
119 122
120 123
124 126
125 128
129 132
132 134
139 141
128 130
129 131
133 135
134 136
147 150
151 154
153 155
157 160
160 162
167 170
188 192
191 194
199 202
163 166
164 167
165 169
171 175
178 183
203 206
206 209
214 217
17
18

2.2trainer idlers 10 20
GZ-XX-XXX-XXX-XXX---------------------------------bearing size
--------------------------------idler diameter
----------------------------------belt width
---------------------------------degree
-----GZ trough idlers
B.W
IDLERS
TYPE
IDLER TYPE
H1
25.4
27
27.4
305
28.5
28.9
-108-205-380
205
39.4
39.5
PG
-108-305-380
305
40.8
41
-100-108-206
PG
-108-206-380
42.9
43.1
-100-108-306
PG
-108-306-380
44.1
44.2
-100-133-205
PG
-133-205-380
43.6
43.8
-100-133-305
PG
-133-305-380
44.5
44.7
-100-133-206
PG
-133-206-380
46.6
46.8
-100-133-306
PG
-133-306-380
306
47.8
48
-120-108-205
PG
-108-205-465
205
52.7
52.8
-120-108-305
PG
-108-305-465
54.1
54.2
-120-108-206
PG
-108-206-465
56.7
56.8
-120-108-306
PG
-108-306-465
306
57.9
58
-120-133-205
PG
-133-205-465
205
57.5
57.6
-120-133-305
PG
-133-305-465
58.5
58.6
-120-133-206
PG
-133-206-465
61
61.1
-120-133-306
PG
-133-306-465
306
62.2
62.3
-120-159-205
PG
-159-205-465
205
64.9
65
-120-159-305
PG
-159-305-465
305
65.9
66
-120-159-206
PG
-159-206-465
206
68.5
65.6
-120-159-306
PG
-159-306-465
306
69.7
69.8
-140-108-205
PG
-108-205-530
205
5834
58.6
-140-108-305
PG
-108-305-530
305
59.9
60.1
-140-108-206
PG
-108-206-530
-140-108-306
PG
-108-306-530
-140-133-205
PG
-140-133-305
PG
-140-133-206
PG
-133-206-530
-140-133-306
PG
-133-306-530
306
68.7
69
-140-159-205
PG
-159-205-530
205
80.1
80.3
-140-159-305
PG
-159-305-530
81.1
81.3
-140-159-206
PG
-159-206-530
83.9
84.1
-140-159-306
PG
-159-306-530
85.1
85.3
PG
-108-204-315
-080-108-205
PG
-108-205-315
-080-108-305
PG
-108-305-315
-100-108-205
PG
-100-108-305
245
205
315
108
204
1090
306
205
300
1290
305
335
206
133 465
159
108
305
206
1540
193
316
173
191
305
340
339
380
220 170 M16
325
206
108
318
1350
305
133
282
170 130 M12

270
206
380
160.5
1150
205
108
180.5
20
WeightKg
24.5
800 -080-108-204
89
10
25
-89-205-315
204
20
24.3
PG
10
20
-080-89-205
H2
22.7
-89-204-315
1400
22.5
PG
1200
10
-080-89-204
1000
Bearing
D
1600
360
390
350
254
268.5
285.5
262
205.5
217
231.5
248.5
225
366
392
419
449
412
406
435
461 260 200 M16
490
465
62.7
63
306
63.9
64.2
-108-205-530
205
63.7
64
-133-305-530
305
64.6
64.9
67.5
67.8
133
159
206
230.5
530
206
305
206
306
1740
1800
380
410
276.5
293.5
239.5
256.5
438
468
49*2
521
280 220 M16

2.2trainer idlers 10 20
GZ-XX-XXX-XXX-XXX---------------------------------bearing size
------------------------------------idler diameter
-----------------------------------belt width
---------------------------------degree
-----GZ trough idlers
idler
B.W
type
Idler type
-160-133-205
-160-133-305
-160-133-206
-160-133-306
-160-159-205
1600 -160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-180-133-205
-180-133-305
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-133-205-600
-133-305-600
-133-206-600
-133-306-600
-159-205-600
-159-305-600
-159-206-600
-159-306-600
-159-207-600
-159-307-600
-159-308-600
-133-205-670
-133-305-670
-180-133-206
-180-133-306
-180-159-205
1800 -180-159-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-200-133-205
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-133-206-670
-133-306-670
-159-205-670
-159-305-670
-159-206-670
-156-306-670
-159-307-670
-159-307-670
-159-308-670
-133-205-750
-200-133-305
-200-133-206
-200-133-306
-200-133-305
-200-159-206
2000 -200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-307
-200-194-307
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-133-305-750
-133-206-750
-133-306-750
-133-305-750
-159-206-750
-159-306-750
-159-207-750
-159-307-750
-159-308-750
-194-207-750
-194-307-750
-200-194-308
-220-159-206
-220-159-306
-200-159-207
-200-159-307
2200
-220-159-308
-220-194-207
-220-194-307
-220-194-308
PG
PG
PG
PG
PG
PG
PG
PG
PG
-194-308-750
-159-206-800
-159-306-800
-159-207-800
-159-307-800
-159-308-800
-194-207-800
-194-307-800
-194-308-800
133
600
159
133
670
159
133
159
750
194
159
800
194
bearin
g
205
305
206
306
205
306
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
305
206
306
207
307
308
207
307
308
206
306
207
307
308
207
307
308
H1
A
425
10
317
H2
20
276
10
491
20
300 240
450
331
287
517
576
440
327
279
513
580
2180 2250
340 270
465
339
292
538
605
470
351
299
551
639
495
364
307
557
649
530
382
329
612
687
515
374
317
596
340 270
340 270
391
334
631
M1
6
M1
6
M1
6
676
2720 2800
550
553
1980 2050
2420 2500
weightKg
P
711
M1
6
10
20
99
100
103
104
108
109
112
113
117
119
126
107
108
99
100
103
105
108
109
113
114
117
120
126
108
109
112
113
118
119
122
123
128
130
137
127
113
114
118
119
123
124
128
131
138
127
128
131
133
145
149
150
154
157
164
186
189
128
132
133
145
149
150
155
157
165
186
189
196
161
163
167
170
178
200
202
211
197
162
163
168
171
179
200
203
211
19
20

2.3Transfer idlers
BGZ-XX-XXX-XXX-XXX---------------------------------bearing
--------------------------------diameter
----------------------------belt width
----------------------trough degree
-----BGZ trough idlers transfer idlers
idler
B.W
type
Idler size
800
1000
1200
1400
bearin
g
-080-89-204
PG -89-204-315
89
-080-108-205
PG -108-205-315
108 315 205
-080-133-305
PG -108-305-315
133
-100-108-205
PG -108-205-380
108
-100-133-305
PG -133-305-380
133 380 305
-100-159-306
PG -159-306-380
159
-120-108-205
PG -108-205-465
108
-120-133-305
PG -133-305-465
133 465 305
-120-159-306
PG -159-306-465
159
-140-108-205
PG -108-205-530
108
-140-133-305
PG -133305-530
133 530 305
-140-159-306
PG -159-306-530
159
H1
A
245
1090 1150
weightKg
P
10
204
H2
H
20 10
180.5 281 160.5
20
10
20
314
25
26
31
30
170
130
M12
270
193
302
173
336
305
305
207
329
195
370
38
38
205
300
316
338
191
378
41
41
46
48
1290 1350
220
170
M16
325
230.5 364 205.5
404
306
370
249.5 396 237.5
447
60
61
205
335
434
54
54
62
62
76
76
59
60
66
69
91
91
1540 1600
254
391
217
360
268.3 417 231.5
306
390
285.5 447 245.5 4788
205
350
306
1740 1800
262
410
225
459
260
200
M16
464
380
276.5 437 239.5
490
410
293.5 467 256.5
519
280
220
M16

2.4Impact idlers30 35 45
HZ-XX-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler diameter
---------------------------------belt width
---------------------------------trough degree
-----HZ impact idlers
idlers
B.W TYPE
-050-89-204
-065-89-204
-065-89-205
650 -060-108-204
-065-108-205
-065-108-305
-080-89-204
-080-89-205
800 -080-108-204
-080-108-205
-080-108-305
-100-108-205
-100-108-305
-100-108-206
-100-108-306
1000
-100-133-205
-100-133-305
-100-133-206
-100-133-306
-120-108-205
-120-108-305
-120-108-206
-120-108-306
-120-133-205
-120-133-305
1200 -120-133-206
-120-133-306
-120-159-205
-120-159-305
-120-159-206
-120-159-306
-120-159-308
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
Idler type
-89-204-200
-89-204-250
-89-204-250
-108-204-250
-108-205-250
-108-305-250
-89-204-315
-89-205-315
-108-204-315
-108-205-315
-108-305-315
-108-205-380
-108-305-380
-108-206-380
-108-306-380
-133-205-380
-133-305-380
-133-206-380
-133-306-380
-108-205-465
-108-305-465
-108-206-465
-108-306-465
133-205-465
-133-305-465
-133-206-465
-133-306-465
-159-205-465
-159-305-465
-159-206-465
-159-306-465
-159-308-465
-140-108-205
-140-108-305
-140-108-206
-140-108-306
-140-133-205
-140-133-305
1400 -140-133-206
-140-133-306
-140-159-205
-140-159-305
-140-159-206
-140-159-306
-140-159308
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-108-205-530
-108-305-530
-108-206-530
-108-306-530
-133-205-530
-133-305-530
-133-206-530
-133-306-530
-159-205-530
-159-305-530
-159-206-530
-159-306-530
-159-308-530
500
bearing
D
L
200
89
250
108
89
315
108
108
380
133
108
133
465
159
108
133
159
530
204
204
205
204
205
305
204
205
204
205
304
205
304
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
308
205
305
206
306
205
305
206
306
205
305
206
306
308
H2
WeightKg
P
Q
D
30 35 45
30
35 45
740 800 220 135.5 286 300 328 170 130 M12 17.6
18
18.6
21.1 21.2 21.7
235 135.5 311 329 364
23.4 23.5
24
890 950
170 130 M12 23.6 23.9 24.6
265 146 330 346 381
27
27.3
28
22.1 22.4 23.2
27.1 27.4 28.1
245 135.5 350 366 410
29.9 30.2 30.9
1090 1150
170 130 M12 30.6 30.6 31.5
270 146 371 385 427
34.8 34.9 35.7
28.6 28.7 29.5
49.1 49.1 51.7
41.6 41.6 44.2
300 159 417 437 487
48.6 48.7 51.3
57
57
59.7
1290 1350
220 170 M16
54.8 54.8 57.8
55.1 55.1 58.1
325 173.5 442 462 515
57.3 57.4 60.3
69.3 69.4 72.3
64.7 64.9 67.9
55.4 55.6 58.7
335 176 476 503 564
64
64.2 67.3
74
74.2 77.3
74.7 71.7 74.9
72
72
75.3
360 190.5 501 528 592
1540 1600
260 200 M16 74.7 74.8 78.1
89.5 89.6
93
72.1 82.7 85.8
83.6 84.1 87.2
390 207.5 529 557 518
86.1 86.6 89.8
87.3 87.8
91
101.4 101.9 105.1
A
350
1740 1800
H1
184
516
380 198.5
541
410 215.5
570
72.8
62.2
548 518
71.9
83.1
75.6
77.2
573 646
280 220 M16 80.3
100.9
100
101.4
603 672
104.3
105.5
121.8
72.8
62.2
71.9
83.2
75.7
77.2
80.6
101.2
100.6
102
104.9
106.1
122.4
84.3
73.8
83.5
91.7
87.3
88.9
92
112.6
105.4
106.9
109.7
110.9
127.2
21
22

2.4Impact idlers30 35 45
HZ-XX-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler diameter
---------------------------------belt width
---------------------------------trough degree
-----HZ impact idlers
B.W TYPE
1600
1800
2000
2200
-160-133-205
-160-133-305
-160-133-206
-160-133-306
-160-159-205
-160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-180-133-205
-180-133-305
-180-133-206
-180-133-306
-180-159-205
-180-159-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-200-133-205
-200-133-305
-200-133-206
-200-133-306
-200-133-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307
-200-194-308
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
-220-194-207
-220-194-307
-220-194-308
idlers
Idler type
PG -133-205-600
PG -133-305-600
PG -133-206-600
PG -159-306-600
PG -159-205-600
PG -159-305-600
PG -159-206-600
PG -159-306-600
PG -159-207-600
PG -159-307-600
PG -159-308-600
PG -133-205-670
PG -133-305-670
PG -133-206-670
PG -133-306-670
PG -159-205-670
PG -159-305-670
PG -159-206-670
PG -159-306-670
PG -159-207-670
PG -159-307-670
PG -159-308-670
PG -133-205-750
PG -133-305-750
PG -133-206-750
PG -133-306-750
PG -133-305-750
PG -159-206-750
PG -159-306-750
PG -159-207-750
PG -159-307-750
PG -159-308-750
PG -194-207-750
PG -194-307-750
PG -194-308-750
PG -159-206-800
PG -159-306-800
PG -159-207-800
PG -159-307-800
PG -159-308-800
PG -194-207-800
PG -194-307-800
PG -194-308-800
133
600
159
133
670
159
133
159
750
193.7
159
800
193.7
bearing A
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
305
206
306
207
307
308
207
307
308
206
306
207
307
308
207
307
308
425
H1
H2
30 35 45
325 212.5 212.5 607
629
450
247 225.5 225.5 630
653
734
440
232 212.5 212.5 639
670
770
2180 2250
2420 2500
245 225.5 225.5 663
693
783
470 247.5 222.5 222.5 694
725
828
495 257.5 235.5 235.5 718
749
850
530 277.5 252.5 252.5 753
783
884
515 263.5 235.5 235.5 750
778
885
2720 2800
550
280 252.5 252.5 783
812
721
1980 2050
465
920
300
240 M16
340
270 M16
340
270 M16
340
270 M16
WeightKg
45 35 45
118.3 118.6 121
118.6 119 121.6
121.9 122.3 124.7
141.2 141.6 144
126.8 131.3 133.7
128.2 132.8 135.2
131.4 135.9 138.3
132.6 137.1 139.5
136.3 140.9 143.3
139.2 143.8 146.1
150.9 155.5 157.9
129.7 130.1 135.3
130 130.4 135.6
133.7 134.1 139.3
154.6 155 160.2
143.3 144.1 146.6
144.8 145.5 148
148.3 149 151.6
149.5 150.2 152.8
153.6 154.6 156.9
123.5 157.2 159.8
170 170.7 173.3
150.9 151.2 153.6
152.9 153.2 155.6
155.3 155.6 158
179.5 179.9 182.3
174.9 176.3 179
178.9 180.2 182.9
180.1 181.4 184.1
184.7 186.1 188.8
187.6 189 191.7
203.1 204.5 207.1
211 211.3 214.5
213.1 213.5 216.7
220.5 220.9 224.1
188 188.3 191.7
193.7 194.1 197.5
198.7 199 202.4
201.6 201.9 205.3
218.3 217.6 222
229.2 229.5 232.8
231.4 231.9 234.9
239.1 239.4 242.6

2.5Carrying Friction centering idlers
MSTZ-XXX-XXX-XXX---------------------------------bearing size
----------------------------idler diameter
---------------------------Belt width
----MSTZ Carrying friction centering idlers
Idler type
B.W
TYPE
D
Flat idlers
H1
H2
890
200
119
320
916
210
122
331
220 135.5 350
bearing
Weight
Kg
204
41.14
204
46.46
204
48.61
204
49.91
204
52.11
Friction idlers
-050-63.5-204
PG -63.5-200-204
-63.5-137-230-204
-50-76-204
PG -76-200-204
-76-135-230-204
76
-050-89-204
PG -89-200-204
-89-135-230-204
89
912
-605-76-204
PG -76-250-204
-76-185-280-204
76
1050 225
-065-89-204
PG -89-250-204
-89-185-280-204
89
-065-108-205
PG -108-250-205
-108-184-294-205
108
1100 265
414
205
65.8
-080-89-204
PG -89-315-204
-89-228-323-204
89
1184 245 135.5 403
204
59.16
-080-108-205
PG -89-315-205
-108-232-342-205
108
205
73.35
-080-133-305
PG -133-315-305
-133-238-348-305
133
1276 305 159.5 471
305
93.94
-100-108-205
PG -108-380-205
-108-295-405-205
108
1440 300
205
85.99
1000 -100-133-305
PG -133-380-305
-133-302-412-305
133
380 1290 1473 325 173.5 524
305
107.68
-100-159-306
PG -159-380-306
-159-310-429-306
159
1535 370 190.5 564
306
136.61
-120-105-205
PG -108-380-205
-108-355-465-205
108
1641 335
205
107.39
1200 -120-133-305
PG -133-465-305
-133-363-473-305
133
465 1540 1626 360 190.4 575
3205
130.04
-120-159-306
PG -159-465-306
-159-375-494-306
159
1754 390 207.4 618
306
161.24
-140-108-205
PG -108-530-205
-108-423-533-205
108
1816 350
205
115.19
1400 -140-133-305
PG -133-530-305
-133-430-540-305
133
530 1740 1849 380 198.4 622
305
138.62
-140-159-306
PG -159-530-306
-159-434-553-306
159
1914 410 215.4 660
306
170.22
500
650
800
63.5
200
250
740
122
315 1090 1243 270
146
159
176
184
130 M12
359
890 1055 235 135.5 379

146
170
442
170
170
130 M12
130 M12
493
220
170 M16
544
260
200 M16
591
280
220 M16
23
24

2.6Return friction centering idlers
MXTZ-XXX-XXX-XXX---------------------------------bearing size
----------------------------------idler diameter
---------------------------------belt width
-----MXTZ Return friction centering idlers
B.W
Type
-050-63.5-204
Friction idler type
Bearing
320
H2
87
290
840
740
93.5
327.5
100
334
93.5
321.5
100
323
109.5
358.5
66.5
144.5
367.5
60.3
144.5
367.5
154
396
74.4
90.1
MG
-63.5-230-320-204
204
63.5
500 -050-76-204
MG
-76-228-323-204
204
76
-050-89-204
MG
-89-228-323-204
204
89
-065-76-204
MG
-76-303-398-204
204
76
650 -065-89-204
MG
-89-303-398-204
204
89
-065-108-205
MG
-108-288-398-205
205
108
-080-89-204
MG
-89-393-488-204
204
89
488
1190
-080-89-204
MG
-89-378-473-204
204
89
473
1150
-080-108-205
MG
-108-178-488-205
205
108
-080-133-305
MG
-133-178-488-305
305
133
166.5
427.5
-100-108-205
MG
-108-480-590-205
205
108
164
411
1000 -100-133-305
MG
-133-480-590-305
305
133
176.5
433.5
-100-159-306
MG
-159-471-590-306
306
159
189.5
476.5
-120-108-205
MG
-108-580-690-205
205
108
174
426
1200 -120-133-305
MG
-133-580-690-205
205
133
186.5
460.5
-120-159-306
MG
-159-571-690-305
305
159
199.5
520
800
-140-108-205
MG
-108-680-790-205
205
108
1400 -140-133-305
MG
-133-680-790-305
305
133
-140-159-306
MG
-159-671-790-306
306
159
323
398
488
590
690
790
990
890
1090
1190
1376
1626
1826
1290
1540
1740
184
441
196.5
463.5
209.5
527.5
130
90
M12
Weight
Kg
41.2
47.5
50.5
49.8
130
130
90
90
M12
M12
53.6
60.3
87.6
130
90
M16
104.4
108.7
94
130
90
M16
114
125.5
99.8
130
90
M16
124.6
155.5

2.7Return Friction centering idlers
MSPZ-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler diameter
---------------------------------Belt width
-----MSPZ Return friction centering idlers
B.W
500
TYPE
Friction idler type
bearing
686
-050-63.5-204
MG
-63.5-500-686-204
204
63.5
-050-76-204
MG
-76-500-690-204
204
76
Kg)
168
740
800
172
36.4
170
130
M12
41.4
690
-050-89-205
MG
-89-500-690-205
205
89
-065-76-204
MG
-76-650-840-204
204
76
175.5
44.7
187
443.8
840
650
800
890
950
130
M12
MG
-89-650-840-205
204
89
-065-108-205
MG
-108-650-870-205
205
108
870
211
60.2
-080-89-204
MG
-89-800-990-204
204
89
990
200.5
52.4
-080-108-205
MG
-108-800-800-1020-205
205
108
1090
1150
190.5
170
-065-89-204
216
170
130
M12
48.2
67.3
1020
-080-133-305
MG
-133-800-1020-305
305
133
-100-108-205
MG
-108-1000-1220-205
205
108
236
79.3
2463
79.1
1020
1000
-100-133-305
MG
-133-1000-1220-305
305
133
-100-159-306
MG
-159-1000-1238-306
306
159
-120-108-205
MG
-108-1200-1420-205
205
108
1290
1350
1226
258.5
220
170
M16
96.5
291.5
98.3
281
93.5
1420
1200
-120-133-305
MG
-133-1200-1420-305
305
133
-120-159-306
MG
-159-1200-1438-306
306
159
-140-108-205
MG
-108-1400-1620-205
205
108
1540
1600
1438
293.5
260
200
M16
111.9
310.5
114.9
296
101.1
1620
1400
-140-133-305
MG
-133-1400-1620-305
305
133
-140-159-306
MG
-159-1400-1638-306
306
159
1740
1638
1800
313.5
280
220
M16
330.5
120.4
124.5
25
26

2.8Carrying Cone Centering Idlers
ZSTZ-XXX-XXX-XXX---------------------------------Bearing size
-----------------------------------Idler diameter
---------------------------------Belt width
-----ZSTZ Carrying Cone Centering Idlers
B.w
type
-080-108-205
D1
D2
108
89
133
800
-080-133-305
133
108
159
-100-133-305
133
108
159
800
-100-159-306
159
108
159
-120-133-305
133
108
176
H1
H2
270
146
395
296
159.6
422
325
173.5
478
-120-159-306
159
133
194
-140-133-305
133
108
176
-140-159-306
159
133
194
89
D1
D2
L1
L2
89
133
250
340
1000
159
133
415
108
108
176
133
159
315
133
380
500
194
465 550
1150
1090
1350
355
190.5
508
360
190.5
548
380 500
108
1200
315 415
1200
B.w
L2
250 340
1000
1400
L1
1290
1600
390
207.5
578
380
198.5
584
410
215.5
615
H1
H2
245
135.5
380
270
146
400
300
159
450
325
173.5
478
335
176
521
360
190.5
548
390
207.5
578
1540
1800
1740
170 130
260 200
1150
1090
170
130
M12
1600
1540
220
260
170
350
108
1400
200
465
133
558
176
133
159
184
194
550
380
410
198.5
215.5
584
615
1800
1740
280
220
M16
bearing
205
70.9
305
71.1
305
72.9
306
91.5
305
105.5
306
109.4
305
99.7
306
110
weight
Kg
Drawing No
4G204
49.3
DT
03C1211
4G205
51.9
DT
03C1222
70
DT
04C1223
72.9
DT
04C1233
85.6
DT
05C1224
87.4
DT
05C1234
98
DT
05C1244
98
DT
06C1223
4G306
102
DT
06C1224
4G305
99.7
DT
06C1233
4G306
104
DT
06C1234
4G305
105
DT
06C1243
4G306
110
DT
06C1244
4G305
4G306
M16
108
weightKg)
M12
280 220
1290
bearing
220 170
1350
4G305

2.9Return Cone Centering Idlers
ZXTZ-XXX-XXX-XXX---------------------------------Bearing type
----------------------------------Idler diameter
--------------------------------Belt width
-----ZXTZ Return Cone Centering Idlers
B.W
B
800
TYPE
D1
D2
Beaing
L1
H1
H2
-80-108-305
108
159
305
445
217
452
1150
1090
weightKg)
M12
72.3
160
100
-100-108-305
108
176
305
560
254
532
1350
1290
83.9
90
1200
-120-108-306
108
194
306
580
272
557
1600
M16
1540
91.8
180
1400
-120-108-306
108
194
306
780
291
578
1800
1740
121.2
28

2.10Carrying flat idler
SPZ-XXX-XXX-XXX---------------------------------Bearing type
-----------------------------------Idler diameter
---------------------------------Belt width
-----SPZ Carrying flat idler
B
500
650
800
1000
1200
1400
TYPE
Idler
Idler size
-050-89-204
PG -89-204-600
-065-89-204
PG -89-204-750
-065-89-205
PG -89-205-750
-065-108-204
PG -108-204-750
-065-108-205
PG -108-204-750
-065-108-305
PG -108-305-750
-080-89-204
PG -89-204-950
-080-89-205
PG -89-205-950
-080-108-204
PG -108-204-950
-080-108-205
PG -108-205-950
-080-108-305
PG -108-305-950
-080-133-205
PG -133-205-950
-080-133-305
PG -133-305-950
-100-108-205
PG -108-205-1150
-100-108-305
PG -108-305-1150
-100-108-206
PG -108-206-1150
-100-108-306
PG -108-306-1150
-100-133-205
PG -133-205-1150
-100-133-305
PG -133-305-1150
-100-133-206
PG -133-206-1150
-100-133-306
PG -133-306-1150
-100-159-205
PG -159-205-1150
-100-159-305
PG -159-305-1150
-100-159-206
PG -159-206-1150
-100-159-306
PG -159-306-1150
-120-108-205
PG -108-205-1400
-130-108-305
PG -108-305-1400
-120-108-206
PG -108-206-1400
-120-108-306
PG -108-306-1400
-120-133-205
PG -133-205-1400
-120-133-305
PG -133-305-1400
-120-133-206
PG -133-206-1400
-120-133-306
PG -133-306-1400
-120-159-205
PG -159-205-1400
-120-159-305
PG -159-305-1400
-120-159-206
PG -159-206-1400
-120-159-306
PG -159-306-1400
-140-108-205
PG -108-205-1600
-140-108-305
PG -108-305-1600
-140-108-206
PG -108-206-1600
-140-108-306
PG -108-306-1600
-140-133-205
PG -133-205-1600
-140-133-305
PG -133-305-1600
-140-133-206
PG -133-206-1600
-140-133-306
PG -133-306-1600
-140-159-205
PG -159-205-1600
-140-159-305
PG -159-305-1600
-140-159-206
PG -159-206-1600
-140-159-306
PG -159-306-1600
L
600
89
750
108
89
108
950
133
108
133
1150
159
108
133
1400
159
108
133
159
1600
bearing
H1
204
204
205
204
204
305
204
205
204
205
305
205
305
205
305
206
306
205
305
206
306
205
206
305
306
205
206
305
306
205
206
305
306
205
206
305
306
205
305
206
306
205
305
206
306
205
206
305
306
740
800
220
175.5
235
190.5
265
211
240
200.5
270
216
305
238.5
300
246
325
258.5
370
290.5
335
281.5
360
293.5
390
310.5
350
296
380
313.5
410
330.5
890
1090
1290
1540
1740
H2
950
1150
1350
1600
1800
170
130
M12
220
170
M16
260
200
M16
280
220
M16
weithgKg
11.9
13.8
15
16.1
17.3
17.7
17.6
19.1
21
22.5
22.9
24.4
24.7
32.2
32.6
34.6
35
36
36.3
38.2
38.6
41.3
41.7
43.6
44
44.8
45.2
47.6
18
48.7
49
51.4
51.8
55.1
55.4
57.8
58.8
52.3
52.7
55.4
55.8
54.8
55.1
57.8
58.2
59.8
60.1
62.8
63.2

2.10Carrying flat idler
SPZ-XXX-XXX-XXX---------------------------------Bearing type
-----------------------------------Idler diameter
---------------------------------Belt width
-----SPZ Carrying flat idler
B.w
1000
1200
1400
type
Idler
Idler size
Bearing
D
H1
weightKg
-100-108-205
PG -108-205-600
205
-100-108-305
PG -100-305-600
305
-100-108-206
PG -108-206-600
206
38.7
-100-108-306
PG -108-306-600
306
39.5
-100-133-205
PG -133-205-600
205
42.9
-100-133-305
PG -133-305-600
305
-100-133-206
PG -133-206-600
206
45.5
-100-133-306
PG -133-306-600
306
46.8
-100-159-205
PG -159-205-600
205
48.8
-100-159-305
PG -159-305-600
-100-159-206
PG -159-206-600
206
51.5
-100-159-306
PG -159-306-600
306
52.3
-120-108-205
PG -108-205-700
205
46.2
-120-108-305
PG -108-305-700
305
47.14
-120-108-206
PG -108-206-700
206
49.5
-120-108-306
PG -108-306-700
306
50.3
-120-133-205
PG -133-205-700
205
51.4
-120-133-305
PG -133-305-700
-120-133-206
PG -133-206-700
206
54.4
-120-159-306
PG -133-306-700
306
55.2
-120-159-205
PG -159-205-700
205
59.3
-120-159-305
PG -159-305-700
-120-159-206
PG -159-206-700
206
62.3
-120-159-306
PG -159-306-700
306
63.1
-140-133-205
PG -133-205-800
205
63.5
-140-133-305
PG -133-305-800
-140-133-206
PG -133-206-800
206
66.8
-140-133-306
PG -133-306-800
306
67.6
-140-159-205
PG -159-205-800
205
69.6
-140-159-305
PG -159-305-800
-140-159-206
PG -159-305-800
-140-159-306
PG -159-306-800
-140-159-207
PG -159-207-800
207
80.3
-140-159-307
PG -159-308-800
307
81.7
-140-159-308
PG -159-308-800
308
86.8
108
133
600
300
1290
1350
305
159
108
133
35.7
700
305
370
335
1540
1600
305
159
800
305
360
390
305
133
325
380
1740
258.5
306
220
170
M16
281
293.5
260
200
M16
52
59.9
310.5
64.1
313.5
1800
43.5
49.5
290.5
280
206
159
36.6
246
220
M16
70.2
72.9
410
330.5
73.7
29
30

2.11return flat idlers
XPZ-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler diameter
---------------------------------belt width
-----XPZ
B.w
500
650
800
1000
1200
1400
type
-050-89-204
-065-89-204
-065-89-205
-065-108-204
-065-108-205
-065-108-305
-080-89-204
-080-89-205
-080-108-204
-080-108-205
-080-108-305
-080-133-205
-080-133-305
-100-108-205
-100-108-305
-100-108-206
-100-108-306
-100-133-205
-100-133-305
-100-133-206
-100-133-306
-100-159-205
-100-159-305
-100-159-206
-100-159-306
-120-108-205
-130-108-305
-120-108-206
-120-108-306
-120-133-205
-120-133-305
-120-133-206
-120-133-306
-120-159-205
-120-159-305
-120-159-206
-120-159-306
-140-108-205
-140-108-305
-140-108-206
-140-108-306
-140-133-205
-140-133-305
-140-133-206
-140-133-306
-140-159-205
-140-159-305
-140-159-206
-140-159-306
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
Idler
Idler size
-89-204-600
-89-204-750
-89-205-750
-108-204-750
-108-204-750
-108-305-750
-89-204-950
-89-205-950
-108-204-950
-108-205-950
-108-305-950
-133-205-950
-133-305-950
-108-205-1150
-108-305-1150
-108-206-1150
-108-306-1150
-133-205-1150
-133-305-1150
-133-206-1150
-133-306-1150
-159-205-1150
-159-305-1150
-159-206-1150
-159-306-1150
-108-205-1400
-108-305-1400
-108-206-1400
-108-306-1400
-133-205-1400
-133-305-1400
-133-206-1400
-133-306-1400
-159-205-1400
-159-305-1400
-159-206-1400
-159-306-1400
-108-205-1600
-108-305-1600
-108-206-1600
-108-306-1600
-133-205-1600
-133-305-1600
-133-206-1600
-133-306-1600
-159-205-1600
-159-305-1600
-159-206-1600
-159-306-1600
L
600
89
750
108
89
108
950
133
108
133
1150
159
108
133
1400
159
108
133
159
1600
bearing
H1
204
204
205
204
204
305
204
205
204
205
305
205
305
205
305
206
306
205
305
206
306
205
206
305
306
205
206
305
306
205
206
305
306
205
206
305
306
205
305
206
306
205
305
206
306
205
206
305
306
792
740
55.5
100
145
90
M12
55.5
100
145
90
M12
55.5
109.5
100
144.5
100
154
145
90
M12
100
166.5
110
164
110
176.5
150
90
M16
120
189.5
120
174
120
186.5
150
90
M16
130
199.5
130
184
130
196.5
150
90
M16
100
209.5
942
1142
1342
1592
1800
890
1090
1290
1540
1740
weight
Kg
9.3
10.6
11.8
13
14.1
14.6
13.5
14.7
16.2
17.7
18.1
20.2
20.5
21.1
21.6
23.5
23.9
24.1
24.4
26.4
26.7
29.5
29.8
31.8
32.1
24.6
25
27.4
27.8
28.7
29
31.4
31.8
35.1
35.5
37.3
38.2
27.3
27.8
30.5
30.9
31.5
31.8
34.5
34.9
38.8
39.1
41.8
42.2

-----------------------------------idler diameter
---------------------------------belt width
-----XPZ
B.w
1600
1800
2000
2200
type
Idler
bearing
Idler size
H1
-160-133-205
PG -133-205-1800
205
-160-133-305
PG -133-305-1800
305
-160-133-206
PG -133-206-1800
206
-160-133-306
PG -133-306-1800
306
133
1800
206
weight
Kg
51.5
165
51.9
232
55.1
55.5
1950
2050
300
240
M16
-160-159-206
PG -159-206-1800
-160-159-306
PG -159-306-1800
-160-159-207
PG -159-207-1800
-160-159-307
PG -159-307-1800
307
68.6
-160-159-308
PG -159-308-1800
308
73.7
-180-133-205
PG -133-205-2000
205
57.8
-180-133-305
PG -133-305-2000
305
-180-133-206
PG -133-206-2000
206
-180-133-306
PG -133-306-2000
306
306
159
64.1
165
207
133
2000
206
63.7
170
245
67.8
58.1
237
61.7
62.1
2180
2250
340
270
M16
-180-159-206
PG -159-206-2000
-180-159-306
PG -159-306-2000
-180-159-207
PG -159-207-2000
-180-159-307
PG -159-307-2000
307
76.6
-180-159-308
PG -159-308-2000
308
82.9
-200-133-205
PG -133-205-2200
205
62.3
-200-133-305
PG -133-305-2200
305
-200-133-206
PG -133-206-2200
206
-200-133-306
PG -133-306-2200
306
67
-200-159-206
PG -159-206-2200
206
76.9
-200-159-306
PG -159-306-2200
-200-159-207
PG -159-207-2200
-200-159-307
PG -159-307-2200
307
-200-159-308
PG -159-308-2200
308
88.8
-200-194-207
PG -194-207-2200
207
111.1
-200-194-307
PG -194-307-2200
-200-194-308
PG -194-308-2200
308
118.1
-220-159-206
PG -159-206-2500
206
84.2
-220-159-306
PG -159-306-2500
306
-220-159-207
PG -159-207-2500
-220-159-307
PG -159-307-2500
-220-159-308
PG -159-308-2500
-220-194-207
PG -194-207-2500
-220-194-307
PG -194-307-2500
-220-194-308
PG -194-308-2500
306
159
159
71.6
170
207
133
2200
306
200
2420
2500
2500
308
200
200
280
307
308
340
270
M16
77.3
81.9
297
112
2720
295
2800
89.8
340
207
194
62.6
267
84.6
215
207
307
75.8
82.8
307
159
250
66.6
207
194
71.2
270
M16
90.6
97.4
123.7
215
312
124.6
131.4
31
32

-----------------------------------idler diameter
---------------------------------belt width
-----XPZ
B.w
1600
1800
2000
2200
idler
type
Idler size
-160-133-205
-160-133-305
-160-133-206
-160-133-306
-160-159-205
-160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-180-133-205
-180-133-305
-180-133-206
-180-133-306
-180-133-205
-180-159-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-180-133-205
-200-133-305
-200-133-206
-200-133-306
-200-159-205
-200-159-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307
-200-194-308
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-133-205-900
-133-305-900
-133-206-900
-133-306-900
-159-205-900
-159-305-900
-159-206-900
-159-306-900
-159-207-900
-159-307-900
-159-308-900
-133-205-1000
-133-305-1000
-133-206-1000
-133-306-1000
-159-205-1000
-159-305-1000
-159-206-1000
-159-306-1000
-159-207-1000
-159-307-1000
-159-308-1000
-133-205-1100
-133-305-1100
-133-206-1100
-133-306-1100
-159-205-1100
-159-305-1100
-159-206-1100
-159-306-1100
-159-207-1100
-159-307-1100
-159-308-1100
-194-207-1100
-194-307-1100
-194-308-1100
-159-206-2500
-159-306-2500
-159-207-2500
-159-307-2500
-159-308-2500
-220-194-207
-220-194-307
-220-194-308
PG -194-207-2500
PG -194-307-2500
PG -194-308-2500
133
900
159
133
1000
159
133
159
1100
194
159
2500
194
bearing
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
207
307
308
206
306
207
307
308
207
307
308
165
1980
2180
2420
2720
H1
232
H2
165
245
460
170
237
434
2250
170
250
460
200
267
465
200
280
490
200
297
530
215
295
510
2800
215
312
434
2050
2500
540
300
240
M16
340
270
M16
340
270
M16
340
270
M16
weight
Kg
108.1
108.7
112
112.7
117.7
118.3
121.6
122.4
126.3
127.8
133.6
120.9
121.5
125.1
125.9
131.9
132.6
136.2
137
141.3
142.8
149.1
131.9
132.5
136.4
137.2
143.5
144.2
148.1
148.9
153.7
155.2
162
185.8
187.6
194.5
163
163.8
169.2
170.7
178.2
204.4
206.2
213.8

2.12V type idlers
VZ-XXX-XXX-XXX---------------------------------Bearing size
-----------------------------------idler diameter
---------------------------------belt width
-----VZ V idlers
(F)V ahead inclined idlers
B.w
800
1000
1200
1400
type
-080-89-204
-080-89-205
-080-108-204
-080-108-205
-080-108-305
-080-133-205
-080-133-305
-100-108-205
-100-108-305
-100-108-206
-100-108-306
-100-133-205
-100-133-305
-100-133-206
-100-133-306
-100-159-205
-100-159-305
-100-159-206
-100-159-306
-120-108-205
-120-108-305
-120-108-206
-120-108-306
-120-133-205
-120-133-305
-120-133-206
-120-133-306
-120-159-205
-120-159-305
-120-159-305
-120-159-306
-140-108-205
-140-108-305
-140-108-206
-140-108-306
-140-133-205
-140-133-305
-140-133-206
-140-133-306
-140-159-205
-140-159-305
-140-159-206
-140-159-306
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
idlers
Idler size
-89-204-465
-89-205-465
-108-204-465
-108-205-465
-108-305-465
-133-205-465
-133-305-465
-108-205-600
-108-305-600
-108-206-600
-108-306-600
-133-205-600
-133-305-600
-133-206-600
-133-306-600
-159-205-600
-159-305-600
-159-206-600
-159-306-600
-108-205-700
-108-305-700
-108-206-700
-108-306-700
-133-205-700
-133-305-700
-133-206-700
-133-306-700
-159-205-700
-159-305-700
-159-305-700
-159-306-700
-108-205-800
-108-305-800
-108-206-800
-108-306-800
-133-205-800
-133-305-800
-133-206-800
-133-306-800
-159-205-800
-159-305-800
-159-206-800
-159-306-800
89
465
108
108
133
600
159
108
133
700
159
108
133
159
800
bearing
204
205
204
205
305
205
305
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
305
306
205
305
206
306
205
305
206
306
205
305
206
306
H2
328
1142
1090
100
338
145
90
M12
150
90
M16
159
90
M16
150
90
M16
357
371
1342
1290
110
384
417
401
1592
1540
120
414
447
420
1800
1740
130
433
466
weight
Kg
24
25.5
26.5
28.21
29.1
31.4
32
36.6
37.5
39.6
40.4
41.4
42
44.1
44.8
47
47.7
49.7
50.5
48.6
49.5
51.9
52.7
52.6
53.2
55.6
56.4
59.9
60.5
62.9
63.7
57.1
58
60.7
61.5
61.5
62.1
64.8
65.6
68.9
69
72.2
73
33
34

2.12V type idlers
VZ-XXX-XXX-XXX---------------------------------Bearing size
-----------------------------------idler diameter
---------------------------------belt width
-----VZ V idlers
(F)V ahead inclined idlers
B.w
1600
1800
2000
2200
TYPE
idlers
Idler size
-160-133-205
-160-133-305
-160-133-206
-160-133-306
-160-159-205
-160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-108-133-205
-180-133-305
-180-133-206
-180-133-306
-180-159-205
-180-159-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-180-133-205
-200-133-305
-200-133-206
-200-133-306
-200-159-205
-200-159-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307
-200-194-308
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-133-205-900
-133-305-900
-133-206-900
-133-306-900
-159-205-900
-159-305-900
-159-206-900
-159-306-900
-159-207-900
-159-307-900
-159-308-900
-133-205-1000
-133-305-1000
-133-206-1000
-133-306-1000
-159-205-1000
-159-305-1000
-159-206-1000
-159-306-1000
-159-207-1000
-159-307-1000
-159-308-1000
-133-205-1100
-133-305-1100
-133-206-1100
-133-306-1100
-159-205-1100
-159-305-1100
-159-206-1100
-159-306-1100
-159-207-1100
-159-307-1100
-159-308-1100
-194-207-1100
-194-307-1100
-194-308-1100
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
PG
PG
PG
PG
PG
-159-206-1250
-159-306-1250
-159-207-1250
-159-307-1250
-159-308-1250
159
-220-194-207
-220-194-307
-220-194-308
PG -194-207-1250
PG -194-307-1250
PG -194-308-1250
194
133
900
159
133
100
0
159
133
159
1100
194
125
0
bearing
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
207
307
308
206
306
207
307
308
207
307
308
165
1980
2180
2420
335
H2
165
360
530
170
335
523
2250
2500
170
360
548
200
350
560
200
380
590
200
410
620
380
300
240
M16
340
270
M16
340
270
M16
340
410
616
2800
215
505
2050
215
2720
H1
646
270
M16
weight
Kg
106.5
107.1
110.4
111.2
115.8
116.5
119.7
120.54
124.4
125.9
131.7
116.09
117.5
121.1
121.9
127.3
128
131.6
132.4
136.7
138.2
144.5
128.3
128.9
132.8
133.6
139.6
142.3
144.2
145
149.8
151.3
158.1
181.3
183.1
190
158.2
159
164.4
165.9
173.4
199.8
20.6
209.2

2.13Back V
idlers
FVZ-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler diameter
---------------------------------belt width
-----FVZ back V idlers
B.w
type
idlers
Idler size
1000
1200
1400
bearing
D
H1
H2
L
205
weight
Kg
-100-108-205
PG -108-205-380
-100-108-305
PG -108-305-380
-100-108-206
PG -108-206-380
206
35.5
-100-108-306
PG -108-306-380
306
36.3
-100-133-205
PG -133-205-380
205
36.6
-100-133-305
PG -133-305-380
305
-100-133-206
PG -133-206-380
-100-133-306
PG -133-306-380
306
-100-159-205
PG -159-205-380
205
41
-100-159-305
PG -159-305-380
305
41.6
-100-159-206
PG -159-206-380
206
42.9
-100-159-306
PG -159-306-380
306
43.7
-120-108-205
PG -108-205-465
205
37.7
-120-108-305
PG -108-305-365
305
-120-108-206
PG -108-206-365
206
-120-108-306
PG -108-306-365
306
41
-120-133-205
PG -133-205-365
205
42.4
-120-133-305
PG -133-305-365
-120-133-206
PG -133-206-365
206
44.6
-120-133-306
PG -133-306-365
306
45.4
-120-159-205
PG -159-205-365
205
46.5
-120-159-305
PG -159-305-365
305
-120-159-306
PG -159-306-365
306
48.7
-120-159-306
PG -159-306-365
306
49.5
-140-108-205
PG -108-205-530
205
41.2
-140-108-305
PG -108-305-530
305
-140-108-206
PG -108-206-530
206
43.9
-140-108-306
PG -108-306-530
306
44.7
-140-133-205
PG -133-205-530
205
18.9
-140-133-305
PG -133-305-530
-140-133-206
PG -133-206-530
260
51.3
-140-133-306
PG -133-306-530
306
52.1
-140-159-205
PG -159-205-530
205
54.7
-140-159-305
PG -159-305-530
305
-140-159-206
PG -159-206-530
206
57.2
-140-159-306
PG -159-306-530
306
58
305
108
133
380
159
108
133
365
159
108
109
110
33.3
530
206
305
305
110
1350
1290
110
190
190
220
235
196
196
90
90
M16
M16
34.2
37.2
38.5
39.3
110
120
190
225
260
260
196
196
90
90
M16
M16
38.6
40.2
1600
1540
120
120
130
1800
1740
130
130
225
225
252
252
252
280
295
260
280
295
196
196
196
196
196
90
90
90
90
90
M16
M16
M16
M16
M16
43
47.1
42.1
19.5
55.4
36

2.13Back V
idlers
FVZ-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler diameter
---------------------------------belt width
-----FVZ back V idlers
B.w
1600
1800
1400
2200
type
idlers
Idler size
bearing
H1
H2
weight
Kg
-160-133-205
PG -133-205-600
205
-160-133-305
PG -133-305-600
305
-160-133-206
PG -133-206-600
-160-133-306
PG -133-306-600
-160-159-206
PG -159-206-600
-160-159-306
PG -159-306-600
-160-159-207
PG -159-207-600
-160-159-307
PG -159-307-600
307
100.2
-160-159-308
PG -159-308-600
308
104.5
-180-133-205
PG -133-205-670
205
97.5
-180-133-305
PG -133-305-607
305
-180-133-206
PG -133-206-607
206
100.5
-180-133-306
PG -133-306-370
306
101.3
-180-133-205
PG -133-205-670
205
133
86.7
165
206
105
87.3
243
89.5
306
600
206
90.3
1980
2050
300
240
M16
306
159
96.1
165
207
133
670
305
95.3
170
105
115
255
98.7
98.1
243
103.8
2180
2250
340
270
M16
-180-159-305
PG -159-305-670
-180-159-206
PG -159-206-670
-180-159-306
PG -159-306-670
-180-159-207
PG -159-207-670
207
110.6
-180-159-307
PG -159-307-670
307
112.2
-180-159-308
PG -159-308-670
308
116.8
-180-133-205
PG -133-205-750
205
106.2
-200-133-305
PG -133-305-750
305
-200-133-206
PG -133-206-750
206
109.5
-200-133-306
PG -133-306-750
306
110.3
-200-159-206
PG -159-206-750
206
116.6
-200-159-306
PG -159-306-750
306
-200-159-207
PG -159-207-750
-200-159-307
PG -159-307-750
307
122.2
-200-159-308
PG -159-308-750
308
127.2
-200-194-207
PG -194-207-750
207
-200-194-307
PG -194-307-750
-200-194-308
PG -194-308-750
308
147.8
-220-159-206
PG -159-206-800
206
127.1
-220-159-306
PG -159-306-800
306
-220-159-207
PG -159-207-800
-220-159-307
PG -159-307-800
-220-159-308
PG -159-308-800
-220-194-207
PG -194-207-800
-220-194-307
PG -194-307-800
-220-194-308
PG -194-308-800
206
159
159
106.9
170
306
133
750
200
2420
250
207
194
307
308
115
130
130
255
307
308
106.8
297
280
130
340
270
M16
117.4
120.6
297
142.6
127.8
215
2720
140
295
2800
131.3
340
207
194
107.7
140.8
207
800
200
200
307
159
104.5
270
M16
132.8
138.2
152.8
215
140
312
164.6
160

2.14Flat comb type idlers
market way
PSZ-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler diameter
---------------------------------belt width
-----PSZ flat comb type idlers
B.w
type
500
-50-89-204
-065-89-204
-065-89-205
-065-108-204
-065-108-205
-065-108-305
-080-89-204
-080-89-205
-080-108-204
-080-108-205
-080-108-305
-080-133-205
-080-133-305
-100-108-205
-100-108-305
-100-108-206
-100-108-306
-100-133-205
-100-133-305
-100-133-206
-100-133-306
-100-159-205
-100-159-305
-100-159-206
-200-159-306
-120-108-205
-120-108-305
-120-108-206
-120-108-306
-120-133-205
-120-133-305
-120-133-206
-120-133-306
-120-159-205
-120-159-305
-120-159-306
-220-159-308
-140-108-205
-140-108-305
-140-108-206
-140-108-306
-140-133-205
-140-133-305
-140-133-206
-140-133-306
-140-159-205
-140-159-305
-140-159-206
-140-159-306
650
800
1000
1200
1400
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
idler
Idler size
-89-204-600
-89-204-750
-89-208-750
-108-204-750
-108-205-750
-108-305-750
-89-204-950
-89-204-950
-108-204-950
-108-205-950
-108-305-950
-133-205-950
-133-305-950
-108-205-1150
-108-305-1150
-108-206-1150
-108-306-1150
-133-205-1150
-133-305-1150
-133-206-1150
-133-306-1150
-159-205-1150
-159-305-1150
-159-206-1150
-159-306-1150
-108-205-1140
-108-308-1140
-108-206-1140
-108-306-1140
-133-205-1140
-133-305-1140
-133-206-1140
-133-306-1140
-159-205-1140
-159-305-1140
-159-306-1140
-159-308-1140
108-205-1600
-108-305-1600
-108-206-1600
-108-306-1600
-133-205-1600
-133-305-1600
-133-206-1600
-133-306-1600
-159-205-1600
-159-305-1600
-159-206-1600
-159-306-1600
D
89
L
600
89
750
108
89
108
950
133
108
133
1150
159
108
133
1400
159
108
133
159
1600
bearing
204
204
208
204
205
305
204
205
204
205
305
205
305
205
305
206
306
205
305
206
306
205
305
206
306
205
308
206
306
205
305
206
306
205
305
306
308
205
305
206
306
205
305
206
306
205
305
206
306
H1
792
740
56
100
145
90
M12
56
100
145
90
M12
56
110
100
145
100
154
145
90
M16
100
167
100
164
110
177
150
90
M16
110
190
120
174
120
187
150
90
M16
120
200
130
184
130
197
150
90
M16
130
210
942
1142
1342
1592
1800
890
1090
1290
1540
1740
weight
Kg
10.4
12
13.9
13.7
16.7
14.9
150
17.4
17.2
21
18.7
19.4
19.9
25.2
22.3
24.3
31.7
23.1
23.6
25.6
40.7
31.5
31.9
33.9
34.3
29.4
26.2
28.6
37.5
27.7
28.2
30.6
49
37.9
38.4
40.8
41.1
33.2
29.1
31.9
41.9
30.4
30.9
33.6
54.7
41.9
42.4
45.1
45.5
38

-----------------------------------idler diameter
---------------------------------belt width
B.w
idler
type
Idler size
1600
1000
2000
2200
bearing
D
H1
weight
Kg
-160-133-205
SG -133-205-1800
205
-160-133-305
SG -133-305-1800
305
-160-133-206
SG -133-206-1800
-160-133-306
SG -133-306-1800
-160-159-206
SG -159-206-1800
-160-159-306
SG -159-306-1800
-160-159-207
SG -159-207-1800
-160-159-307
SG -159-307-1800
307
73
-160-159-308
SG -159-308-1800
308
87.1
-180-133-205
SG -133-205-2000
205
56.6
-180-133-305
SG -133-305-2000
305
-180-133-206
SG -133-206-2000
206
-180-133-306
SG -133-306-2000
306
-180-159-206
SG -159-209-2000
-180-159-306
SG -159-306-2000
-180-159-207
SG -159-207-2000
-180-159-307
SG -159-307-2000
307
81.4
-180-159-308
SG -159-308-2000
308
97.7
-200-133-205
SG -133-205-2200
205
60.9
-200-133-305
SG -133-305-2200
305
-200-133-206
SG -133-206-2200
206
65.4
-200-133-306
SG -133-306-2200
306
95.8
-200-159-206
SG -159-206-2200
206
82
-200-159-306
SG -159-306-2200
306
82.4
-200-159-207
SG -159-207-2200
-200-159-307
SG -159-307-2200
307
87.9
-200-159-308
SG -159-308-2200
308
105.1
-200-194-207
SG -194-207-2200
207
-200-194-307
SG -194-307-2200
-200-194-308
SG -194-308-2200
308
106.3
-220-159-206
SG -159-206-2500
206
90
-220-159-306
SG -159-306-2500
-220-159-207
SG -159-207-2500
-220-159-307
SG -159-307-2500
-220-159-308
SG -159-308-2500
308
116.2
-220-194-207
SG -194-207-2500
207
110.7
-220-194-307
SG -194-307-2500
-220-194-308
SG -194-307-2500
133
50.4
165
206
51
232
54.2
306
1800
206
79.2
1980
2050
300
240
M16
306
159
68.3
165
207
133
2000
209
170
245
72.1
57.1
237
60.7
88.5
2180
2250
340
270
M16
306
159
159
2200
200
2420
2500
207
194
200
250
80.5
61.4
267
280
240
270
M16
87
99.6
200
307
297
99.7
306
159
2500
194
90.4
215
207
307
307
308
75.9
76.3
170
207
133
67.9
2720
295
2800
95.6
240
215
312
270
M16
96.6
110.9
118.2

-----------------------------------idler diameter
---------------------------------belt width
B.w
1600
1000
2000
2200
type
-160-133-205
-160-133-305
-160-133-206
-160-133-205
-160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-180-133-205
-180-133-305
-180-133-206
-180-133-306
-180-133-205
-180-133-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-200-133-205
-200-133-305
-200-133-206
-200-133-306
-200-133-205
-200-133-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307
-200-194-308
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
-220-194-207
-220-194-307
-220-194-308
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
idler
Idler size
-133-205-900
-133-305-900
-133-206-900
-133-205-900
-133-305-900
-159-206-900
-159-306-900
-159-207-900
-159-307-900
-159-308-900
-133-205-2000
-133-305-2000
-133-206-2000
-133-306-2000
-133-205-2000
-133-305-2000
-159-206-2000
-159-306-2000
-159-207-2000
-159-307-2000
-159-308-2000
-133-205-2200
-133-305-2200
-133-206-2200
-133-306-2200
-133-205-2200
-133-305-2200
-159-206-2200
-159-306-2200
-159-207-2200
-159-307-2200
-159-308-2200
-194-207-2200
-194-307-2200
-194-308-2200
-159-206-2500
-159-306-2500
-159-207-2500
-159-307-2500
-159-308-2500
-194-207-2500
-194-307-2500
-194-307-2500
133
900
159
133
2000
159
133
159
2200
194
159
2500
193.7
bearing
205
305
206
205
305
206
306
207
307
308
205
305
206
306
205
305
209
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
207
307
308
206
306
207
307
308
207
307
308
165
1980
2180
2420
2720
H1
231.5
165
244.5
460
170
236.5
434
2250
170
249.5
460
200
266.5
465
200
279.5
490
200
297
530
215
294.5
510
2800
215
312
weight
Kg
434
2050
2500
540
300
240
M16
340
270
M16
240
270
M16
240
270
M16
106.5
100.1
135.4
121.1
114.6
125.3
125.2
129.9
131.8
147.9
118.9
119.9
123.5
151
135.3
136.3
139.8
140.6
144.8
146.8
164.6
129.5
131
134.5
164.8
146.9
138.7
151.8
152.6
157.2
159.1
178.6
178
178.2
185.9
169.2
170
175.3
177.2
196.5
193.7
194
202.4
40

2.15V Comb type idlers
VSZ-XXX-XXX-XXX---------------------------------bearing
--------------------------------idler diameter
-------------------------------belt width
----VSZ V comb type idlers
B.W
1600
1000
1200
1400
IDLERS
TYPE
Idlersize
-080-89-204
-080-89-205
-080-108-204
-080-108-205
-080-108-305
-080-133-205
-080-133-305
SG
SG
SG
SG
SG
SG
SG
-89-204-465
-89-205-465
-108-204-465
-108-205-465
-108-305-465
-133-205-465
-133-305-465
-100-108-205
-100-108-306
-100-108-206
-100-108-306
-100-133-205
-100-133-305
-100-133-206
-100-133-306
-100-159-205
-100-159-305
-100-159-206
-100-159-306
-120-108-205
-120-108-305
-120-108-206
-120-108-306
-120-133-205
-120-133-305
-120-133-206
-120-133-306
-120-159-205
-120-159-305
-120-159-206
-120-159-306
-140-108-205
-140-108-305
-140-108-206
-140-108-306
-140-133-205
-140-133-305
-140-133-206
-140-133-306
-140-159-205
-140-159-305
-140-159-206
-140-159-306
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-108-205-600
-108-306-600
-108-206-600
-108-306-600
-133-205-600
-133-305-600
-133-206-600
-133-306-600
-159-205-600
-159-305-600
-159-206-600
-159-306-600
-108-205-700
-108-305-700
-108-206-700
-108-306-700
-133-205-700
-133-305-700
-133-209-700
-133-306-700
-159-205-700
-159-305-700
-159-206-700
-159-306-700
-108-205-800
-108-305-800
-108-206-800
-108-306-800
-133-205-800
-133-305-800
-133-206-800
-133-306-800
-159-205-800
-159-305-800
-159-206-800
-159-306-800
89
108
465
133
108
133
600
159
108
133
700
159
108
133
159
800
bearing
204
205
204
205
305
205
305
205
306
206
306
205
306
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
H1
weight
Kg
M12
26.9
29.5
29.1
33.1
31
32.6
33.6
328
1142
1090
100
338
145
90
357
371
1342
1290
110
384
150
90
M16
150
90
M16
150
90
M16
417
401
1592
1540
120
414
447
420
1800
1740
130
433
466
42.8
39.9
42.1
50.5
42.5
43.6
5.8
62
52.1
53
55.2
56
56
52.6
55.1
64.8
53.9
55
57.5
76.5
65.6
66.5
69
69.8
65.9
61.9
64.8
75.3
63.3
64.4
67
89.1
75.8
76.8
79.6
79.6

2.15V Comb type idlers
VSZ-XXX-XXX-XXX---------------------------------bearing
--------------------------------idler diameter
-------------------------------belt width
----VSZ V comb type idlers
1600
1800
2000
2200
-160-133-205
-160-133-305
-160-133-206
-160-133-206
-160-159-205
-160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-133-205-900
-133-305-900
-133-206-900
-133-206-900
-159-205-900
-159-305-900
-159-206-900
-159-306-900
-159-207-900
-159-307-900
-159-308-900
-180-133-205
-180-133-305
-180-133-206
-180-133-306
-180-133-205
-180-159-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-180-133-205
-200-133-305
-200-133-206
-200-133-306
-200-159-205
-200-159-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307-200-194-308
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
-220-194-207
-220-194-307
-220-194-308
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-133-205-1000
-133-305-1000
-133-206-1000
-133-306-1000
-133-205-1000
-159-305-1000
-159-206-1000
-159-306-1000
-159-207-1000
-159-307-1000
-159-308-1000
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
-159-206-1250
-159-306-1250
-159-207-1250
-159-307-1250
-159-308-1250
-194-207-1250
-194-307-1250
-194-308-1250
133
900
159
133
1000
159
133
159
1100
194
159
1250
194
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
305
206
306
207
307
308
207
307
308
206
306
207
307
308
207
307
308
165
1980
2720
360
335
Kg)
M16
104.9
98.4
109.2
133.85
11.9
112.7
123.4
123.4
128
129.9
146.1
240
523
360
548
200
350
560
200
380
590
200
410
620
215
380
616
2800
410
530
170
215
505
2250
2500
300
170
2420
335
H2
2050
165
2180
H1
646
340
270
M16
340
270
M16
340
270
M16
114.9
115.9
119.6
147
130.89
131.7
135.3
136.1
140.6
142.2
160
125.9
127.4
130.9
161.2
143
134.9
147.9
148.7
153.3
155.2
174.7
173.5
173.8
181.5
164.4
165.2
170.5
172.4
191.7
189.4
189.3
197.8
42

2.16Spiral idlers
LZ-XXX-XXX-XXX--------------------------------bearing size
---------------------------------idler diameter
------------------------------belt width
----LZ spiral idlers
B.W
TYPE
500
050-89-204
-065-89-204
-065-89-205
-065-108-204
-065-108-205
-065-108-305
-080-89-204
-080-89-205
-080-108-204
-080-108-205
-080-108-305
-080-133-205
-080-133-305
-100-108-205
-100-108-305
-100-108-206
-100-108-306
-100-133-205
-100-133-305
-100-133-206
-100-133-306
-100-159-205
-100-159-305
-100-159-206
-100-159-306
-100-159-105
-200-159-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307-200-194-308
-140-108-205
-140-108-305
-140-108-206
-140-108-306
-140-133-205
-140-133-305
-140-133-206
-140-133-306
-140-159-205
-140-159-305
-140-159-206
-140-159-306
650
800
1000
2200
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
IDLERS
Idlersize
-133-205-600
-89-204-750
-89-205-750
-108-204-750
-108-205-750
-108-305-750
-89-204-950
-89-205-950
-108-204-950
-108-205-950
-108-305-950
-133-205-950
-133-305-950
-108-205-1150
-108-305-1150
-108-206-1150
-108-306-1150
-133-205-1150
-133-305-1150
-133-206-1150
-133-306-1150
-159-205-1150
-159-306-1150
-159-206-1150
-159-306-1150
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
133-205-1100
-108-205-1600
-108-305-1600
-108-206-1600
-108-306-1600
-133-205-1600
-133-305-1600
-133-206-1600
-133-306-1600
-159-205-1600
-159-305-1600
-159-206-1600
-159-306-1600
D
89
L
600
89
750
108
89
108
950
133
108
133
1400
159
159
194
108
109
110
1600
bearing
H1
204
204
205
204
205
305
204
205
204
205
305
205
305
205
305
206
306
205
305
206
306
205
305
206
306
205
305
206
306
207
307
308
207
307
308
205
305
206
306
205
305
206
306
205
305
206
306
792
740
56
100
145
90
M12
56
100
145
90
M12
56
110
100
145
100
154
145
90
M12
100
167
120
174
120
187
150
90
M16
120
200
200
380
200
410
130
184
130
197
150
90
M16
130
210
942
1142
1592
1800
890
1090
1540
1740
weight
Kg
16.6
19.7
18.4
19
20.1
20.4
24.8
23.2
24
25.5
25.7
29.3
29.7
36.1
36.3
38.7
39.3
40.9
41.3
43.7
44.1
48.3
48.6
51
51.3
143
134.9
147.9
148.7
153.3
155.2
174.7
173.5
173.8
181.5
40.6
40.8
43.5
44.1
45.4
45.9
48.6
19
53.8
54.1
56.8
57.2

2.16Spiral idlers
---------------------------------idler diameter
------------------------------belt width
B.W
1600
1800
2000
2200
IDLERS
TYPE
Idlersize
-133-205-1800
-133-305-1800
-133-206-1800
-133-308-1800
-159-209-1800
-159-306-1800
-159-207-1800
-159-307-1800
-159-308-1800
-133-205-2000
-160-133-205
-160-133-305
-160-133-206
-160-133-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-180-133-205
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-180-133-305
-180-133-206
SG -133-305-2000
SG -133-206-2000
-180-133-306
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-200-133-205
-200-133-305
-200-133-206
-200-133-306
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307
-200-194-308
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-133-306-2000
-159-206-2000
-159-306-2000
-159-207-2000
-159-307-2000
-159-308-2000
-133-205-2200
-133-305-2200
-133-206-2200
-133-306-2200
-159-206-2200
-159-306-2200
-159-207-2200
-159-307-2200
-159-308-2200
-194-207-2200
-194-307-2200
-194-308-2200
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
-220-194-207
-220-194-307
-220-194-308
SG
SG
SG
SG
SG
SG
SG
SG
-159-206-2500
-159-306-2500
-159-207-2500
-159-307-2500
-159-308-2500
-194-207-2500
-194-307-2500
-194-308-2500
133
1800
159
2000
159
133
2200
194
159
2500
194
205
305
306
306
206
306
207
307
308
205
306
206
306
207
307
308
205
305
206
306
306
30
205
305
206
306
207
307
206
306
207
307
308
207
307
308
165
1980
2180
2420
165
245
170
237
170
250
200
267
200
280
200
297
240
M16
340
270
M16
340
270
M16
240
312
weight
Kg
68.1
68.5
71.8
72.2
81.4
81.8
85.6
86.3
91.5
76.2
76.7
80.3
295
2800
215
232
2250
2500
300
215
2720
H1
2050
305
206
133
159
bearing
270
M16
80.7
91
91.4
95.6
96.3
102.7
82.6
83.1
87
87.4
98.7
99.1
103.8
104.5
110.6
104
104.9
110.9
109.2
109.6
114.8
115.6
122.4
115.9
116.8
123.5
44

2.16Spiral idlers
---------------------------------idler diameter
------------------------------belt width
B.W
1600
1800
2000
2200
IDLERS
TYPE
-160-133-205
-160-133-305
-160-133-206
-160-133-306
-160-159-205
-160-159-305
-160-159-206
-160-159-306
-160-159-207
-160-159-307
-160-159-308
-180-133-205
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
Idlersize
-133-205-900
-133-305-900
-133-209-900
-133-306-900
-159-205-900
-159-305-900
-159-209-900
-159-306-900
-159-207-900
-159-307-900
-159-308-900
-133-205-1000
-180-133-305
-180-133-206
-180-133-306
-180-159-205
-180-159-305
-180-159-206
-180-159-306
-180-159-207
-180-159-307
-180-159-308
-200-133-205
-200-133-305
-200-133-206
-200-133-306
-200-159-205
-200-159-305
-200-159-206
-200-159-306
-200-159-207
-200-159-307
-200-159-308
-200-194-207
-200-194-307
-200-194-308
-220-159-206
-220-159-306
-220-159-207
-220-159-307
-220-159-308
-220-194-207
-220-194-307
-220-194-308
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
-133-305-1000
-133-206-1000
-133-306-1000
-159-205-1000
-159-305-1000
-159-206-1000
-159-306-1000
-159-207-1000
-159-307-1000
-159-308-1000
-133-205-1100
-133-305-1100
-133-206-1100
-133-306-1100
-159-205-1100
-159-305-1100
-159-206-1100
-159-306-1100
-159-207-1100
-159-307-1100
-159-308-1100
-194-207-1100
-194-307-1100
-194-308-1100
-159-206-1250
-159-306-1250
-159-207-1250
-159-307-1250
-159-308-1250
-194-207-1250
-194-207-1250
-194-308-1250
133
900
159
133
159
133
159
194
159
194
bearing
205
305
206
306
205
305
206
306
207
307
308
205
305
206
306
205
1000
305
206
306
207
307
308
205
305
206
306
205
305
206
1100
306
207
307
308
207
307
308
206
306
207
307
1250
308
207
307
308
165
1980
2180
2720
2720
H1
232
300
165
115
460
170
237
434
2250
170
250
460
200
267
465
200
280
490
200
297
530
215
295
510
2800
215
312
weight
B.W
Kg Idlersize
434
2050
2800
540
240
M16
340
270
M16
340
270
M16
340
270
M16
126
126.9
130.1
130.9
134.8
135.4
138.6
139.4
143.2
144.7
149.7
141
141.9
145.5
146.3
151.4
152.1
155.6
156.4
160.6
162.1
167.7
154.2
155.1
159.1
159.9
164.6
165.3
169.2
170
174.6
176.1
182.1
179.4
178.3
185.7
187.8
188.6
193.8
195.3
202
197.7
196.6
204.8

3.1plain idlers carrying idlers
PG-XXX-XXX-XXX---------------------------------idler length
-----------------------------bearing size
-------------------------idler diameter
----PG plain idlers
L3
Roll part weight

kg
weight
Kg)
188
188
1.32
1.54
1.91
2.13
228
1.79
2.48
278
2.11
2.85
315
343
2.52
3.49
380
390
408
2.94
160
170
194
1.56
2.48
200
210
234
1.81
2.88
250
260
284
2.13
3.39
PG -89-205-315
315
325
349
2.54
4.06
PG -89-205-380
380
390
414
2.96
4.72
PG -108-204-200
200
210
228
3.32
3.01
PG -108-204-250
250
260
278
2.77
3.58
PG -108-204-315
315
325
343
3.36
4.33
380
390
408
3.95
5.07
PG -108-204-465
465
475
493
4.71
6.05
PG -108-204-530
530
540
558
5.3
6.79
PG -108-205-200
200
210
234
2.42
3.5
PG -108-205-250
250
260
284
2.87
4.14
315
325
349
3.46
4.97
380
390
414
4.05
5.81
PG -108-205-465
465
475
499
4.81
6.9
PG -108-205-530
530
540
564
5.4
7.73
200
210
234
2.78
3.96
250
260
284
3.23
4.6
315
325
349
3.82
5.43
380
390
414
4.41
6.27
PG -108-305-465
465
475
499
5.17
7.36
PG -108-305-530
530
540
564
5.76
8.19
PG -108-206-200
200
210
234
2.76
4.31
PG -108-206-250
250
260
284
3.21
5.04
PG -108-206-315
315
325
349
3.8
5.98
380
390
414
4.39
6.93
465
475
499
5.15
8.16
530
540
564
5.74
9.11
200
210
234
2.98
4.69
250
260
284
3.43
5.41
315
325
349
4.02
6.36
380
390
414
4.61
7.31
idlers
PG -76-204-160
PG -89-204-160
76
L1
L2
160
160
170
170
200
210
250
260
PG -89-204-315
315
PG -89-204-380
PG -89-204-200
20
PG -89-204-250
PG -89-205-160
bearing
6204
89
PG -89-205-200
25
PG -89-205-250
20
PG -108-204-380
PG -108-205-315
25
PG -108-305-200
PG -108-305-315
108
6305
PG -108-305-380
6206
PG -108-206-380
PG -108-206-465
PG -108-206-530
6204
6205
PG -108-205-380
PG -108-305-250
6205
30
PG -108-306-200
PG -108-306-250
PG -108-306-315
PG -108-306-380
6306
14
18
14
18
18
22
22
46

-----------------------------bearing size
-------------------------idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-108-306-465
-108-306-530
-133-205-200
-133-205-250
-133-205-315
-133-205-380
-133-205-465
-133-205-530
-133-205-600
-133-205-670
-133-205-750
-133-205-800
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-133-305-200
-133-305-250
-133-305-315
-133-305-380
-133-308-465
-133-305-530
-133-305-600
-133-305-670
-133-305-750
-133-305-800
-133-206-200
-133-206-250
-133-206-315
-133-206-380
-133-206-465
-133-206-530
-133-206-600
-133-206-670
-133-206-750
-133-206-800
-133-306-200
-133-306-250
-133-306-315
-133-306-380
-133-306-465
-133-306-530
-133-306-600
bearing
108
30
6306
6205
25
6305
133
6206
30
6306
L1
L2
465
530
200
250
315
380
465
530
600
670
750
800
475
540
510
260
325
390
475
540
610
680
760
810
200
250
315
380
465
530
600
670
750
800
200
250
315
380
465
530
600
370
750
800
200
250
315
380
465
530
600
210
260
325
390
145
540
610
680
760
810
210
260
325
390
145
540
610
680
760
810
210
260
325
390
145
540
610
22
11
18
11
22
11
11
L3
Roll part weight

kg
Total weithg
Kg)
499
564
234
284
349
414
399
564
642
712
792
842
5.37
5.96
3.24
3.79
4.52
5.25
5.2
6.92
7.71
8.49
9.38
9.94
8.54
9.49
4.31
5.06
6.03
7.01
8.28
9.26
10.34
11.39
12.59
13.34
234
284
349
414
499
564
642
712
792
842
234
284
349
414
499
564
642
712
792
842
234
284
349
414
499
564
642
3.44
3.99
4.72
5.45
6.4
7.12
7.91
8.69
9.58
10.14
3.42
3.97
4.7
5.43
6.38
7.1
7.89
8.67
9.56
10.12
3.64
4.19
4.92
5.65
6.6
7.32
8.11
4.61
5.36
6.33
7.31
8.58
9.56
10.64
11.69
12.89
13.64
4.96
5.8
6.88
7.97
9.39
10.47
11.68
12.85
14.19
15.02
5.34
6.18
7.26
8.35
9.77
10.85
12.06

-----------------------------bearing size
-------------------------idler diameter
----PG plain idlers
bearing
L1
L2
L3
Roll part weight

kg
Total weithg
Kg
108
30
6306
670
750
680
760
22
11
712
792
8.89
9.78
13.23
14.57
PG -133-306-800
800
810
842
10.34
15.4
PG -159-205-200
200
210
234
4.32
5.39
PG -159-205-250
250
260
284
5.05
6.35
PG -159-205-315
315
325
349
6.05
7.59
PG -159-205-380
380
390
414
7.07
8.83
PG -159-205-465
465
475
499
8.37
10.46
idler
PG -133-306-670
PG -133-306-750
6205
PG -159-205-530
530
540
564
9.36
11.7
PG -159-205-600
600
610
642
10.34
13.07
PG -159-205-670
670
680
PG -159-205-750
750
760
800
810
200
210
PG -159-305-250
250
PG -159-305-315
712
11.5
14.4
792
12.73
15.93
842
13.49
16.89
234
4.54
5.71
260
284
5.3
6.67
315
325
349
6.3
7.91
PG -159-305-380
380
390
414
7.29
9.15
PG -159-308-465
465
470
499
8.59
10.78
PG -159-205-800
25
PG -159-205-200
6205
PG -159-305-530
11
18
530
540
564
9.58
12.02
PG -159-305-600
600
610
642
10.65
13.39
PG -159-305-670
670
680
712
11.72
14.72
750
760
792
12.95
16.25
PG -159-305-800
800
810
842
13.71
17.21
PG -159-206-200
200
210
234
4.52
6.07
PG -159-206-250
250
260
284
5.28
7.11
PG -159-206-315
315
325
349
6.28
8.46
PG -159-206-380
380
390
414
7.27
9.81
PG -159-206-465
465
475
499
8.57
11.28
530
540
564
9.56
12.93
600
610
642
10.63
14.43
670
680
712
11.7
15.89
750
760
792
12.93
17.55
PG -159-206-800
800
810
842
13.69
18.59
PG -159-206-900
900
910
942
15.22
20.67
PG -159-206-950
950
960
992
15.98
21.71
PG -159-306-200
200
210
234
4.74
6.45
PG -159-306-250
250
260
284
5.5
7.49
315
315
349
6.5
8.84
380
390
414
7.49
10.19
PG -159-305-750
159
PG -159-206-530
6206
PG -159-206-600
PG -159-206-670
PG -159-206-750
PG -159-306-315
PG -159-306-380
30
6306
11
22
11
48

-----------------------------bearing size
-------------------------idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
159-306-465
159-306-530
-159-306-600
-159-306-670
-159-306-750
-159-306-800
-159-306-900
-159-306-950
-159-207-200
-159-207-250
-159-207-315
-159-307-380
-159-207-465
-159-207-530
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-159-207-600
-159-207-670
-159-207-750
-159-207-800
-159-207-900
-159-207-950
-159-207-1050
-159-207-1120
-159-307-200
-159-307-250
-159-307-315
-159-307-380
-159-307-465
-159-307-530
-159-307-600
-159-307-670
-159-307-750
-159-307-800
-159-307-900
-159-307-950
-159-307-1050
-159-307-1120
-159-308-530
-159-308-600
-159-308-670
30
bearing
6306
6207
159
35
6307
40
6308
L1
L2
465
530
600
670
750
800
900
950
200
250
315
380
465
530
475
540
610
680
760
810
910
960
210
260
325
390
475
540
600
670
750
800
900
950
1050
1120
200
250
315
380
465
530
600
670
750
800
900
950
1050
1120
530
600
670
610
680
760
810
910
960
1060
1130
210
260
325
390
475
540
610
680
730
810
910
960
1060
1130
540
610
680
22
11
25
11
32
13
L3
Roll part weight

kg
Total weithg
Kg
499
564
642
712
792
842
942
992
242
292
357
422
507
572
8.79
9.78
10.85
11.92
13.15
13.91
15.44
16.2
4.68
5.44
6.44
7.43
8.73
9.72
11.96
13.31
14.81
16.27
17.93
18.97
21.05
22.09
6.86
8
9.48
10.96
12.9
14.38
642
712
792
842
942
992
1092
1162
242
292
357
422
507
572
642
712
792
842
942
992
109*2
1162
578
648
718
10.79
11.86
13.09
13.85
15.38
16.14
17.67
18.74
5.31
6.04
4.04
8.06
9.36
10.35
11.42
12.49
13.72
14.48
16.01
16.77
18.3
19.37
10.64
11.71
12.78
15.97
17.57
19.39
20.53
22.81
23.95
26.23
27.82
7.64
8.78
10.26
11.74
13.68
15.16
16.75
18.35
20.17
21.31
23.59
24.73
27.01
28.6
17.07
18.83
20.59

-----------------------------bearing size
-------------------------idler diameter
----PG plain idlers
L3
Roll part weight

kg
Total weithg
Kg
760
798
14.01
22.59
810
848
14.77
23.85
900
910
948
16.3
26.36
950
960
998
17.06
27.61
PG -159-308-1050
1050
1060
1098
18.59
30.12
PG -159-308-1120
1120
1130
1168
19.66
31.87
PG -194-207-530
530
540
572
16.6
21.26
PG -194-207-600
600
610
642
18.55
23.73
670
680
712
20.5
26.2
750
760
792
22.72
29.03
PG -194-207-800
800
810
842
24.11
30.79
PG -194-207-900
900
910
942
26.89
34.32
idler
L1
L2
PG -159-308-750
750
PG -159-308-800
800
PG -159-308-900
PG -159-308-950
159
40
bearing
6308
PG -194-207-670
6207
PG -194-207-750
32
13
PG -194-207-950
950
960
992
28.29
36.09
PG -194-207-1050
1050
1060
1092
31.07
39.62
1120
1130
1162
33.01
42.09
PG -194-307-530
530
540
572
17.31
22.12
PG -194-307-600
600
610
642
19.26
24.59
PG -194-307-670
670
680
712
21.21
27.06
750
760
792
23.43
29.89
800
8910
842
24.82
31.65
PG -197-307-900
900
910
942
27.6
35.18
PG -194-307-950
950
960
992
29
36.95
PG -194-307-1050
1050
1060
1092
31.78
40.48
PG -194-307-1120
1120
1130
1162
33.72
42.95
PG -197-308-530
530
540
578
17.66
24.09
PG -194-308-600
600
610
648
19.61
26.73
PG -194-308-670
670
680
718
21.56
29.36
PG -194-308-750
750
760
798
23.78
32.37
PG -194-308-800
800
810
848
25.17
34.25
PG -194-308-900
900
910
948
27.95
38.01
PG -194-308-950
950
960
998
29.35
39.89
PG -194-308-1050
1050
1060
1098
32.13
43.65
PG -194-308-1120
1120
1130
1168
24.07
46.29
35
PG -194-207-1120
6307
PG -194-307-750
PG -194-307-800
194
40
6308
25
32
11
13
50

3.1plain idlers V idlers
--------------------------------bearing size
-------------------------------idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-89-204-315
-89-204-380
-89-204-465
-89-204-600
-89-205-315
-89-205-380
-89-205-465
-89-205-600
-108-204-315
-108-204-380
-108-204-465
-108-204-600
-108-204-700
-108-204-(670)
-108-204-800
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-108-204-(750)
-108-205-315
-108-205-380
-108-205-465
-108-205-600
-108-205-700
-108-205-(670)
-108-205-800
-108-205-(750)
-108305-315
-105-305-380
-108-305-465
-108-305-600
-108-305-700
-108-305-(670)
-108-305-800
-108-305-(750)
-108-206-315
-108-206-380
-108-206-465
-108-206-600
-108-206-700
-108-206-(670)
-108-206-800
bearing
20
6204
25
6205
20
6204
89
6205
108
25
6305
30
6206
L1
L2
315
380
465
600
315
380
465
600
315
380
465
600
700
670
800
325
390
475
610
325
390
475
610
325
390
475
610
710
380
810
750
315
380
465
600
700
670
800
750
315
380
465
600
700
670
800
750
315
380
465
600
700
670
800
760
325
390
475
610
710
380
810
760
325
390
475
610
710
680
810
760
325
390
475
610
710
680
810
14
18
14
18
22
L3
Roll part weight

kg
Total weithg
Kg
343
408
493
628
349
414
499
634
313
408
493
628
728
698
828
2.52
2.94
3.48
4.34
2.54
2.96
3.5
4.36
3.36
3.95
4.71
5.93
6.83
6.56
7.74
3.49
4.06
4.81
6
4.06
4.72
5.58
6.96
4.33
5.07
6.05
7.6
8.74
8.4
9.89
778
349
414
499
634
734
704
834
784
349
414
499
634
734
704
834
784
349
414
499
634
734
704
834
7.28
3.46
4.02
4.81
6.03
6.93
6.66
7.84
7.38
3.82
4.41
5.17
6.39
7.29
7.02
8.2
7.74
3.8
4.39
5.15
6.37
7.27
7
8.18
9.32
4.97
5.81
6.9
8.63
9.92
9.53
11.2
10.56
5.43
6.27
7.36
9.09
10.38
9.99
11.66
11.02
5.98
6.93
8.16
10.13
11.58
11.14
13.03

--------------------------------bearing size
-------------------------------idler diameter
----PG plain idlers
idler
L3
Roll part weight

kg
Total weithg
Kg
784
349
414
499
634
734
704
834
7.72
4.02
4.61
5.37
6.59
7.49
7.22
8.4
12.3
6.36
7.31
8.54
10.51
11.96
11.52
13.41
760
784
7.94
12.68
325
390
475
610
710
680
810
760
910
1010
1110
1160
1260
325
395
475
610
710
680
810
760
910
1010
1110
1160
1260
325
390
475
610
349
414
499
634
734
704
834
784
942
1042
1142
1192
1292
349
414
499
634
734
704
834
784
942
1042
1142
1192
1292
349
414
499
634
4.52
5.25
6.2
7.71
8.82
8.49
9.94
9.38
11.06
12.18
13.29
13.85
14.97
4.72
5.45
6.4
7.91
9.02
8.69
10.14
9.58
11.26
12.38
13.49
14.05
15.17
4.7
5.43
6.38
7.89
6.03
7.01
8.28
10.31
11.81
11.36
13.31
12.56
14.84
16.34
17.84
18.59
20.09
6.33
7.31
8.58
10.61
12.11
11.66
13.61
12.86
15.14
16.61
18.14
18.89
20.39
3.88
7.97
9.39
11.64
bearing
L1
L2
108
30
6206
108
30
6306
750
315
380
465
600
700
670
800
760
325
390
475
610
710
680
810
PG -108-306-(750)
750
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
315
380
465
600
700
670
800
750
900
1000
1100
1150
1250
315
380
465
600
700
670
800
750
900
1000
1100
1150
1250
315
380
465
600
PG
PG
PG
PG
PG
PG
PG
PG
-108-306-(750)
-108-306-315
-108-306-380
-108-306-465
-108-306-600
-108-306-700
-108-306-(670)
-108-306-800
-108-205-315
-133-205-380
-133-205-465
-133-205-600
-133-205-700
-133-205-(670)
-133-205-800
-133-205-(750)
-133-205-900
-133-205-1000
-133-205-1100
-133-205-(1150)
-133-205-1250
-133-305-315
-133-305-380
-133-305-465
-133-305-600
-133-305-700
-133-305-(670)
-133-305-800
-133-305-(750)
-133-305-900
-133-305-1000
-133-305-1100
-133-305-(1150)
-133-305-1250
-133-206-315
-133-206-380
-133-206-465
-133-206-600
6205
25
133
6305
30
6206
22
18
11
18
11
22
52

--------------------------------bearing size
-------------------------------idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
D
-133-206-700
-133-206-670
-133-206-800
-133-206-750
-133-206-900
-133-206-1000
-133-206-1100
-133-206-1150
-133-206-1250
-133-306-315
-133-306-380
-133-306-465
-133-306-600
-133-306-700
-133-306-670
-133-306-800
-133-306-750
-133-306-900
-133-306-1000
-133-306-1100
-133-306-1150
-133-306-1250
-159-205-315
-159-205-380
-159-205-465
-159-205-600
-15-205-700
-159-205-670
-159-205-800
-159-205-750
-159-205-900
-159-205-1000
-159-205-1100
-159-205-1150
-159-205-1250
-159-305-315
-159-305-380
-159-305-460
-159-305-600
bearing
6206
133
30
6306
6205
159
25
6305
L1
L2
700
670
800
750
900
1000
1100
1150
1250
315
380
465
600
700
670
800
750
900
1000
1100
1150
1250
315
380
465
600
700
670
800
750
900
1000
1100
1150
1250
315
380
460
600
710
680
810
760
910
1010
1110
1160
1260
325
390
475
610
710
680
810
760
910
1010
1110
1160
1260
325
390
475
610
710
680
810
760
910
1010
1110
1160
1260
325
390
475
610
22
11
22
11
18
11
18
L3
Roll part weight

kg
Total weithg
Kg
734
704
834
784
42
1042
1142
1192
1292
349
414
499
634
734
704
834
784
942
1042
1142
1192
1292
349
414
499
634
734
704
834
784
942
1042
1142
1192
1292
349
414
499
634
9
8.67
10.12
9.56
11.24
12.36
13.47
14.03
15.15
4.92
5.65
6.6
8.11
9.22
8.89
10.34
9.78
11.46
12.58
13.69
14.25
15.37
6.08
7.07
8.37
10.43
11.96
11.5
13.49
12.73
15.02
16.55
18.08
18.84
20.37
6.3
7.29
8.59
10.65
13.31
12.81
14.98
14.14
16.69
18.36
20.03
20.86
22.53
7.26
8.35
9.77
12.02
13.69
13.19
15.36
14.52
17.07
18.74
20.41
21.24
22.91
7.59
8.83
10.46
13.04
14.95
14.37
16.86
15.9
18.8
20.71
22.62
23.58
25.49
7.91
9.15
10.78
13.36

--------------------------------bearing size
-------------------------------idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
D
-159-305-700
-159-305-(670)
-159-305-800
-159-308-(750)
-159-305-900
-159-305-1000
-159-305-1100
-159-305-(1150)
-159-305-1250
-159-206-315
-159-206-380
-159-206-465
-159-206-600
-159-206-700
-159-206-(670)
-159-206-800
-159-206-(750)
-159-206-900
-159-206-1000
-159-206-1100
-159-206-(1150)
-159-206-1250
-159-206-1400
-159-206-1500
-159306-315
-159-306-380
-159-306-465
-159-306-600
-159-306-700
-159-306-(670)
-159-306-800
-159-306-(750)
-159-306-900
-159-306-1000
-159-306-1100
-159-306-(1150)
-159-306-1250
-159-306-1400
-159-306-1500
25
bearing
6305
6206
159
30
6306
L1
L2
700
670
800
750
900
1000
1100
1150
1250
315
380
465
600
700
670
800
750
900
1000
1100
1150
1250
1400
1500
315
380
465
600
700
670
800
750
900
1000
1100
1150
1250
1400
1500
710
680
810
760
910
1010
1110
1160
1260
325
390
475
610
710
680
810
760
910
1010
1110
1160
1260
1410
1510
325
390
475
610
710
680
810
760
910
1010
1110
1160
1260
1410
1510
18
11
11
22
11
L3
Roll part weight

kg
Total weithg
Kg
734
704
834
784
942
1042
1142
1192
1292
349
414
199
634
734
704
834
784
942
1042
1142
1192
1292
1442
1542
349
414
499
634
734
704
834
784
942
1042
1142
1192
1292
1142
1542
12.18
11.72
13.71
12.95
15.24
16.77
18.3
19.06
20.59
6.28
7.27
8.57
10.63
12.16
11.7
13.69
12.93
15.22
16.75
18.28
19.04
20.57
22.86
24.39
6.59
7.49
8.79
10.85
12.38
11.92
13.91
13.15
15.44
16.97
18.5
19.26
20.79
23.08
24.61
15.27
14.69
17.18
16.22
19.12
21.03
22.94
23.9
25.81
8.46
9.81
11.58
14.39
16.47
15.84
18.55
17.51
20.67
22.75
24.83
25.87
27.95
31.07
33.15
8.84
10.19
11.96
14.77
16.85
16.22
18.93
17.89
21.05
23.13
25.21
26.25
28.33
31.45
33.53
54

--------------------------------bearing size
-------------------------------idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
D
-159-207-315
-159-207-380
-159-207-465
-159-207-600
-159-207-700
-159-207-(670)
-159-207-800
-159-207-(750)
-159-207-900
-159-207-1000
-159-207-1100
-159-207-(1150)
-159-207-1250
-159-207-1400
-159-207-1500
-159-207-1600
-159-207-1700
-159-307-315
-159-307-380
-159-307-465
-159-307-600
-159-307-700
-159-307-(670)
-159-307-800
-159-307-(750)
-159-307-900
-159-307-1000
-159-307-1100
-159-307-(1150)
-159-307-1250
-159-307-1400
-159-307-1500
-159-307-1600
-159-307-1700
-159-308-600
-159-308-670
-159-308-800
-159-308-(750)
-159-308-900
-159-308-1000
-159-308-1100
bearing
6207
35
159
6307
40
6308
L1
L2
315
380
465
600
700
670
800
750
900
1000
1100
150
1250
1400
1500
1600
1700
315
380
465
600
700
670
800
750
900
1000
1100
1150
1250
1400
1500
1600
1700
600
670
800
750
900
1000
1100
325
390
475
610
710
680
810
760
910
1010
1110
1160
1260
1410
1510
1610
1710
325
390
475
610
710
680
810
760
910
1010
1110
1160
1260
1410
1510
1610
1710
610
680
810
760
910
1010
1110
25
11
32
13
L3
Roll part weight

kg
Total weithg
Kg
357
422
507
642
742
712
842
792
942
1042
1142
1192
1292
1442
1542
1642
1742
357
422
507
642
742
712
842
792
942
1042
1142
1192
1292
1442
1542
1642
1742
642
712
848
798
948
1048
1148
6.44
7.43
8.73
10.79
10.79
12.32
11.86
13.85
13.09
15.38
16.91
18.44
19.2
20.73
23.02
24.55
26.08
27.61
7.07
8.06
9.36
11.42
12.95
12.49
14.48
13.72
16.04
17.54
19.07
19.83
21.36
23.65
25.18
26.71
28.24
11.71
14.77
14.01
16.3
17.83
19.36
9.53
11.02
12.95
16.03
18.31
17.62
20.59
19.45
22.87
25.14
27.42
28.56
30.84
34.26
36.54
38.82
41.1
10.26
11.74
13.68
16.75
19.03
18.35
21.31
20.17
23.59
25.87
28.15
29.29
31.57
34.98
37.54
39.54
41.82
18.77
20.53
23.85
22.59
26.36
28.86
31.37

--------------------------------bearing size
-------------------------------idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
-159-308-(1150)
-159-308-1250
-159-308-1400
-159-3087-1500
-159-308-1600
-159-308-1700
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-194-308-800
-194-207-(750)
-194-207-900
-194-207-1000
-194-207-1100
-194-207-(1150)
-194-207-1250
-194-207-1400
-194-207-1500
-194-207-1600
-194-207-1700
-194-307-800
-194-307-(750)
-194-307-900
-194-307-1000
-194-307-1100
-194-307-(1150)
-194-307-1250
-194-307-1400
-194-307-1500
-194-307-1600
-194-307-1700
-194-308-800
-194-308-(750)
-194-308-900
PG
PG
PG
PG
PG
PG
PG
PG
-194-308-1000
-194-308-1100
-194-308-(1150)
-194-308-1250
-194-308-1400
-194-308-1500
-194-308-1600
-194-308-1700
159
40
bearing
L1
L2
6308
1150
1250
1400
1500
1600
1700
1160
1260
1410
1510
1610
1710
800
750
900
1000
1100
1150
1250
1400
1500
1600
1700
800
750
900
1000
1100
1150
1250
1400
1500
1600
1700
800
750
900
810
760
910
1010
1110
1160
1260
1410
1510
1610
1710
810
760
910
1010
1110
1160
1260
1410
1510
1610
1710
810
760
910
1000
1100
1150
1250
1400
1500
1600
1700
1010
1110
1160
1260
1410
1510
1610
1710
6207
35
194
6307
40
6308
32
25
32
L3
Roll part weight

kg
Total weithg
Kg
12
1198
1298
1448
1548
1648
1748
20.12
21.65
13.94
25.47
27
28.53
32.63
35.14
38.9
41.41
43.92
46.42
842
792
942
1042
1142
1192
1292
1442
1542
1642
1742
842
792
942
1042
1145
1192
1292
1442
1542
1642
1742
848
798
948
24.11
22.72
26.89
29.68
32.46
33.85
36.63
40.8
43.58
46.37
49.15
24.82
23.43
27.6
30.39
33.17
34.56
37.34
41.51
44.29
47.08
49.86
25.17
23.78
27.95
30.79
29.03
34.32
37.86
41.39
43.15
46.69
51.98
55.51
59.05
62.58
31.65
29.89
35.18
38.72
42.25
44.01
47.55
52.84
56.37
59.91
63.44
34.25
32.37
38.01
1048
1148
1198
1298
1448
1548
1648
1748
3.74
33.52
34.91
37.69
41.86
44.64
47.43
50.21
41.77
45.53
47.41
51.17
56.82
60.58
64.34
68.1
11
13
56

3.1plain idlersreturen idlers
----------------------------bearing size
------------------------ idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
D
-76-204-500
-89-204-500
-89-204-600
-89-204-750
-89-204-950
-89-204-1150
-89-205-500
-89-205-600
-89-205-750
-89-205-950
-89-205-1150
-108-204-600
-108-204-750
-108-204-950
-108-204-1150
-108-204-1400
-108-204-1600
-108-205-600
-108-205-750
-108-205-950
-108-205-1150
-108-205-1400
-108-205-1600
-108-305-600
-108-305-750
-108-305-950
-108-305-1150
-108-305-1400
-108-305-1600
-108-206-600
-108-206-750
-108-206-950
-108-206-1150
-108-206-1400
-108-206-1600
-108-306-600
-108-306-750
-108-306-950
-108-306-1150
bearing
76
20
6204
25
6205
20
6204
89
6205
25
108
6305
6206
30
6306
L1
L2
500
500
600
450
950
1150
500
600
750
950
1150
600
750
950
1150
1400
1600
600
750
950
1150
1400
1600
600
750
950
1150
1400
1600
600
750
950
1150
1400
1600
600
750
950
1150
510
510
610
760
960
1160
510
610
760
960
1160
610
760
960
1160
1410
1610
610
760
960
1160
1410
1610
610
760
960
1160
1410
1610
610
760
960
1160
1410
1610
610
760
960
1160
14
18
14
18
18
22
22
L3
Roll part weight

kg
Total weithg
Kg
528
528
628
778
978
1178
534
634
784
984
1184
628
778
978
1178
1428
1628
634
784
984
1184
1434
1634
634
784
984
1184
1434
1634
634
784
984
1184
1134
1634
634
784
984
1184
3.16
3.64
4.28
5.23
6.5
7.78
3.72
4.36
5.31
6.58
7.86
6.03
7.38
9.19
10.99
13.25
15.05
6.05
7.4
9.21
11.01
13.27
15.07
6.39
7.74
9.55
11.35
13.61
15.41
6.37
7.72
9.53
11.33
13.59
15.39
6.59
7.94
9.75
11.55
4.58
5.06
5.94
7.27
9.03
10.79
5.94
6.96
8.49
10.53
12.56
7.7
9.42
11.71
14.01
16.87
19.17
8.65
10.58
13.15
15.72
18.93
21.5
9.09
11.02
13.59
16.16
19.37
21.94
10.13
12.3
15.21
18.12
21.75
24.66
10.51
12.68
15.59
18.5

----------------------------bearing size
------------------------ idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-108-306-1400
-108-306-1600
-133-205-600
-133-205-750
-133-205-950
-133-205-1150
-133-205-1400
-133-205-1600
-133-205-1800
-133-205-2000
-133-205-2200
-133-205-2500
-133-305-600
-133-305-750
-133-305-950
-133-305-1150
-133-305-1400
-133-305-1600
-133-305-1800
-133-305-2000
-133-305-2200
-133-305-2500
-133-206-600
-133-206-750
-133-206-950
-133-206-1150
-133-206-1400
-133-206-1600
-133-206-1800
-133-206-2000
-133-206-2200
-133-206-2500
-133-306-600
-133-306-750
-133-306-950
-133-306-1150
-133-306-1400
-133-306-1600
-133-306-2000
bearing
108
30
6306
6205
25
6305
133
6206
30
6306
L1
L2
1400
1600
600
7501
950
1150
1400
1600
1800
2000
2200
2500
600
750
950
1150
1400
1600
1800
200
2200
2500
600
750
950
1150
1400
1600
1800
2000
2200
2500
600
750
950
1150
1400
1600
1800
1410
1610
610
760
960
1160
1410
1610
1810
2010
2210
2510
610
760
960
1160
1410
1610
1810
2010
2210
2510
610
760
960
1160
1410
1610
1810
2010
2210
2510
610
760
9601
1160
1410
1610
1810
11
18
11
11
22
L3
Roll part weight

kg
Total weithg
Kg
1434
1634
634
781
984
1181
1434
1634
1842
2042
2242
2542
634
784
984
1181
1434
1634
1842
2042
2242
2542
634
784
784
1181
1434
1634
1842
2042
2242
2542
634
784
984
1184
1434
1634
1842
13.81
15.61
7.71
9.38
11.62
13.85
16.65
18.88
21.12
23.35
25.59
28.94
7.91
9.58
11.82
14.05
16.85
19.08
21.32
23.55
25.79
29.14
7.89
9.56
11.8
14.03
16.83
19.06
21.3
23.53
25.77
29.12
8.11
9.78
12.02
14.25
17.05
19.28
21.52
22.13
25.04
10.31
12.56
15.56
18.56
22.31
25.31
28.34
31.34
34.35
38.85
10.61
12.86
15.86
18.86
22.61
25.61
28.64
31.64
34.65
39.15
11.64
14.14
17.48
20.82
24.99
28.33
31.71
35.05
38.38
43.39
12.02
14.52
17.86
21.2
25.37
8.714
32.09
58

----------------------------bearing size
------------------------ idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
-133-306-2000
-133-306-2200
-133-306-2500
-159-205-600
-159-205-750
-159-205-950
-159-205-1150
-159-205-1400
-159-205-1600
-159-205-1800
-159-205-2000
-159-205-2200
-159-205-2500
-159-305-600
-159-305-750
-159-305-950
-159-305-1150
-159-305-1400
-159-305-1600
-159-305-1800
-159-305-2000
-159-305-2200
-159-305-2500
-159-206-600
-159-206-750
-159-206-950
-159-206-1150
-159-206-1400
-159-206-1600
-159-206-1800
-159-206-2000
-159-206-2200
-159-206-2500
-159-206-2800
-159-206-3000
-159-306-600
-159-306-750
-159-306-950
-159-306-1150
bearing
133
30
6030
6205
25
6305
159
6206
30
6306
L1
L2
2000
2200
2500
600
750
950
1150
1400
1600
1800
2000
2200
2500
600
750
950
1150
1400
1600
1800
2000
2200
2500
600
750
950
1150
1400
1600
1800
2000
2200
2500
2800
3000
600
750
950
1150
2010
2210
2510
610
760
960
1160
1410
1610
1810
2010
2210
2510
610
760
960
1160
1410
1610
1810
2010
2210
2510
610
760
960
1160
1410
1610
1810
2010
2210
2510
2810
3010
610
760
960
1160
22
11
11
18
11
22
11
L3
Roll part weight

kg
Total weithg
Kg
2042
2242
2542
634
784
984
1184
1434
1634
1842
2042
2242
2542
634
784
984
1181
1424
1634
1842
2042
2242
2542
634
784
984
1181
1434
1634
1842
2042
2242
2542
2842
3042
634
784
984
1184
23.75
25.99
29.34
10.43
12.73
15.78
18.84
22.66
25.72
28.78
31.84
34.9
39.48
10.65
12.95
16
19.06
22.88
25.94
29
32.06
35.12
39.7
10.63
12.93
15.98
19.04
22.86
25.92
28.98
32.04
35.1
39.68
44.27
47.33
10.85
13.15
16.2
19.26
34.43
38.76
43.77
13.04
15.9
19.73
23.55
28.33
32.15
36.01
39.83
43.65
49.39
13.36
16.22
20.05
23.87
28.65
32.47
36.33
40.15
43.97
49.71
14.39
17.51
21.67
25.83
31.03
35.19
39.39
43.55
47.71
53.95
60.19
64.35
14.77
17.89
22.05
26.21

----------------------------bearing size
------------------------ idler diameter
----PG plain idlers
idler
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
PG
D
-159-306-1400
-159-306-1600
-159-306-1800
-159-306-2000
-159-306-2200
-159-306-2500
-159-306-2800
-159-306-3000
-159-207-600
-159-207-750
-159-207-950
-159-207-1150
-159-207-1400
-159-207-1600
-159-207-1800
-159-207-2000
-159-207-2200
-159-207-2500
-159-207-2800
-159-207-3000
-159-207-3150
-159-207-3350
-159-307-600
-159-307-750
-159-307-950
-159-307-1150
-159-307-1400
-159-307-1600
-159-307-1800
-159-307-2000
-159-307-2200
-159-307-2500
-159-307-2800
-159-307-3000
-159-307-3150
-159-307-3350
-159-307-1600
-159-307-1800
-159-307-2000
30
bearing
6306
6207
159
35
6307
40
6308
L1
L2
1400
1600
1800
2000
2200
2500
2500
3000
600
750
950
1150
1400
1600
1800
2000
2200
2500
2800
3000
3150
3350
600
750
950
1150
1400
1600
1800
2000
2200
2500
2800
3000
3150
3350
1600
1800
2000
1410
1610
1810
2010
2210
2510
2810
3010
610
760
960
1160
1410
1610
1810
2010
2210
2510
2810
3040
3160
3360
610
760
960
1160
1410
1610
1810
2010
2210
2510
2810
3010
3160
3360
1610
1810
2010
a
8
22
11
25
11
32
13
L3
Roll part weight

kg
Total weithg
Kg
1434
1642
1842
2042
2242
2542
2842
3042
642
792
992
1192
1442
1642
1842
2042
2242
2542
2842
3042
3192
3392
642
792
992
1192
1442
1642
1842
2042
2242
2542
2842
3042
3192
3392
1642
1842
2048
23.08
26.14
29.2
32.26
35.32
39.9
44.49
47.55
10.79
13.09
16.14
19.2
23.02
26.08
29.14
32.2
25.26
39.84
44.43
47.49
49.78
52.84
11.42
13.72
16.77
19.83
23.65
26.71
29.77
32.83
35.89
40.47
45.06
48.12
50.41
53.47
27
30.06
33.12
31.41
35.57
39.77
43.93
48.09
54.33
60.57
64.73
15.97
19.39
23.95
28.51
34.2
38.76
43.32
47.88
52.44
59.27
66.11
70.67
74.09
78.65
16.75
20.17
24.73
29.29
34.98
39.87
44.1
48.66
53.22
60.05
66.89
71.45
74.87
79.43
43.92
48.93
53.95
60

----------------------------bearing size
------------------------ idler diameter
----PG plain idlers
L3
Roll part weight

kg
Total weithg
Kg
2210
2248
36.18
58.97
2510
2548
40.76
66.49
2800
2810
2848
45.35
74.02
PG -159-308-3000
3000
3010
3048
48.41
79.04
PG -159-308-3150
3150
3160
3198
50.7
82.8
PG -159-308-3350
3350
2260
3398
53.76
87.82
PG -194-207-1600
1600
1610
1642
46.37
59.05
PG -194-207-1800
1800
1810
1842
51.93
66.11
PG -194-207-2000
2000
2010
2042
57.48
73.18
PG -194-207-2200
2200
2210
2242
63.06
80.24
2500
2510
2542
71.4
90.84
PG -194-207-2800
2800
2810
2842
79.75
101.43
PG -194-207-3000
3000
3010
3042
85.31
108.49
PG -194-207-3150
3150
3160
3192
89.48
113.79
PG -194-207-3350
3350
3360
3392
95.05
120.86
PG -194-207-1600
1600
1610
1642
47.08
59.91
PG -194-307-1800
1800
1810
1842
52.64
66.97
PG -194-307-2000
2000
2010
2042
58.2
74.04
PG -194-307-2200
2200
2210
2242
63.77
81.1
2500
2510
2542
72.11
91.7
PG -194-307-2800
2800
2810
2842
80.46
102.29
PG -194-307-3000
3000
3010
3042
86.02
109.35
PG -194-307-3150
3150
3160
3192
90.19
114.65
PG -194-307-3350
3350
3360
3392
85.76
121.72
PG -194-307-1600
1600
1610
1648
47.43
64.34
PG -194-308-1800
1800
1810
1848
52.99
71.86
PG -194-308-2000
2000
2010
2048
58.55
79.38
PG -194-308-2200
2200
2210
2218
64.12
86.91
2500
2510
2548
72.46
98.19
PG -194-308-2800
2800
2810
2848
80.81
109.48
PG -194-308-3000
3000
3010
3048
86.37
117
PG -194-308-3150
3150
3160
3198
90.54
122.64
PG -194-308-3350
3350
3360
3398
93.11
130.16
idler
L1
L2
PG -159-308-220
2200
PG -159-308-2500
2500
PG -159-308-2800
159
40
PG -194-308-2500
6308
6207
PG -194-207-2500
PG -194-307-2500
bearing
35
6307
194
40
6308
32
25
32
13
11
13

3.2Impact idlers
--------------------------------bearing size
-------------------------------idler diameter
----HG impact idlers
idler
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
-76-204-160
-89-204-160
-89-204-200
-89-204-250
-89-204-315
-89-204-380
-89-205-160
-89-205-200
-89-205-250
-89-205-315
-89-205-380
-108-204-200
-108-204-250
-108-204-315
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
-108-204-380
-108-204-465
-108-204-530
-108-205-200
-108-205-250
-108-205-315
-108-205-380
-108-205-465
-108-205-530
-108-305-200
-108-305-250
-108-305-315
-108-305-380
-108-305-465
-108-305-530
-108-206-200
-108-206-250
-108-206-315
-108-206-380
-108-206-465
HG
HG
HG
HG
HG
-108-206-530
-108-306-200
-108-306-250
-108-306-315
-108-306-380
bearing
76
20
6204
25
6205
20
6204
89
6205
25
108
6305
6206
30
6306
L1
L2
160
160
200
250
315
380
160
200
250
315
380
200
250
315
170
170
210
260
325
390
170
210
260
325
390
210
260
325
380
465
530
200
250
315
380
465
530
200
250
315
380
435
530
200
250
315
380
465
390
475
540
210
260
325
390
475
540
210
260
325
390
475
540
210
260
325
390
475
530
200
250
315
380
540
210
260
325
390
14
18
14
18
18
22
22
L3
Roll part weight

kg
Total weithg
Kg
188
188
228
278
343
408
194
234
284
349
414
228
278
343
1.9
2.06
2.54
3.19
3.96
4.8
2.26
2.79
3.49
4.32
5.24
3.17
3.94
4.99
2.49
5.65
3.23
4
4.92
5.93
3.16
3.84
4.73
5.81
6.98
3.86
4.75
5.95
408
493
558
234
284
349
414
499
564
234
284
349
414
499
564
234
284
349
414
499
6.03
7.42
8.46
3.7
4.58
5.79
7
8.58
9.79
3.27
4.03
2.06
3.1
7.46
8.5
3.25
4.01
5.04
6.08
7.44
7.16
8.75
9.96
4.76
5.84
7.3
8.75
10.66
12.12
4.44
5.38
6.67
7.95
9.64
10.93
4.8
5.83
7.23
8.62
10.45
564
234
284
349
414
8.48
4.64
5.7
7.14
4.14
11.85
6.35
7.69
9.48
11.28
62

3.2Impact idlers
--------------------------------bearing size
-------------------------------idler diameter
idler
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
-108-306-465
-108-306-530
-133-205-200
-133-205-250
-133-205-315
-133-205-380
-133-205-465
-133-205-530
-133-205-600
-133-205-670
-133-205-750
-133-205-800
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
-133-305-200
-133-305-250
-133-305-315
-133-305-380
-133-305-465
-133-305-530
-133-305-600
-133-305-670
-133-305-750
-133-305-800
-133-206-200
-133-206-250
-133-206-315
-133-206-380
-133-206-465
-133-206-530
-133-206-600
-133-206-670
-133-206-750
-133-206-800
-133-306-200
-133-306-250
-133-306-315
-133-306-380
-133-306-465
-133-306-530
-133-306-600
bearing
108
30
6306
6205
25
6305
133
6206
30
6306
L1
L2
465
530
200
250
315
380
465
530
600
670
750
800
475
540
210
260
325
390
475
540
610
680
760
810
200
250
315
380
465
530
600
670
750
800
200
250
315
380
465
530
600
670
750
800
200
250
315
380
465
530
600
210
260
325
390
475
540
610
680
760
810
210
260
325
390
475
540
610
680
760
810
210
260
325
390
475
540
610
22
11
18
11
22
11
11
L3
Roll part weight

kg
Total weithg
Kg
499
564
234
284
349
414
499
564
642
712
792
842
10.46
11.9
4.76
5.81
7.27
8.73
10.65
12.11
13.63
15.15
16.79
17.84
13.63
15.42
5.82
7.07
8.77
10.48
12.73
14.44
16.26
18.04
19.99
21.24
234
284
349
414
499
564
642
712
792
842
234
284
349
414
499
564
642
712
792
842
234
284
349
414
499
564
642
4.76
5.81
7.27
8.73
10.65
12.11
13.63
15.15
16.79
17.84
4.76
5.81
7.27
8.73
10.65
12.11
13.63
15.15
16.79
17.84
6.72
8.3
10.44
12.36
15.18
17.32
19.57
5.92
7.17
8.87
10.58
12.83
14.54
16.36
18.14
20.09
21.34
6.32
7.65
9.46
11.28
13.67
15.49
17.44
19.34
21.42
22.75
8.46
10.31
12.81
15.09
18.38
20.87
23.56

3.2Impact idlers
--------------------------------bearing size
-------------------------------idler diameter
idler
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
-133-306-670
-133-306-750
-133-306-800
-159-205-200
-159-205-250
-159-205-315
-159-205-380
-159-205-465
-159-205-530
-159-205-600
-159-205-670
-159-205-750
-159-205-800
-159-305-200
159-305-250
-159-305-315
-159-305-380
-159-305-465
-159-305-530
-159-305-600
-159-305-670
-159-305-750
-159-305-800
-159-206-200
-159-206-250
-159-206-315
-159-206-380
-159-206-465
-159-206-530
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
-159-206-600
-159-206-670
-159-206-750
-159-206-800
-159-206-900
-159-206-950
-159-306-200
-159-306-250
-159-306-315
-159-306-380
bearing
133
30
6306
6205
25
6305
159
6206
30
6306
L1
L2
670
750
800
200
250
315
380
465
530
600
670
750
800
200
250
315
380
465
530
600
670
750
800
200
250
315
380
465
530
680
760
810
210
260
325
390
475
540
610
680
760
810
210
260
325
390
475
540
610
680
760
810
210
260
325
390
475
540
600
670
750
800
900
950
200
250
315
380
610
680
760
810
910
960
210
260
325
390
22
11
11
18
11
22
11
L3
Roll part weight

kg
Total weithg
Kg
712
792
842
234
284
349
414
499
564
642
712
792
842
234
284
349
414
499
564
642
712
792
842
234
284
349
414
499
564
21.61
24.31
25.89
6.12
7.69
9.49
11.29
13.81
15.61
17.49
19.36
21.8
22.96
6.46
8.03
9.83
11.63
14.15
15.95
17.83
19.7
22.14
23.3
6.44
8.01
9.81
11.61
14.13
15.93
25.98
29.12
30.98
7.18
8.95
11
13.05
15.89
17.94
20.11
22.26
25
26.36
7.63
9.4
11.45
13.5
16.34
18.39
20.56
22.71
25.45
26.81
7.99
9.84
12
14.16
17.14
19.3
642
712
782
842
942
992
234
284
349
414
17.81
19.68
22.12
23.28
26.43
27.6
6.66
8.23
10.03
11.83
21.6
23.87
26.74
28.18
31.88
33.32
8.37
10.22
12.38
14.54
64

3.2Impact idlers
--------------------------------bearing size
-------------------------------idler diameter
idler
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
HG
D
-159-306-465
-159-306-530
-159-306-600
-159-306-670
-159-306-750
-159-306-800
-159-306-900
-159-306-950
-159207-200
-159-207-250
-159-207-315
-159-207-380
-159-207-465
-159-207-530
-159-207-600
-159-207-670
-159-207-750
-159-207-800
-159-207-900
-159-207-950
-159-207-1050
-159-207-1120
-159-207-200
-159-207-250
-159-207-315
-159-207-380
-159-207-465
-159-207-530
-159-207-600
-159-207-670
-159-207-750
-159-207-800
-159-207-900
-159-207-950
-159-207-1050
-159-207-1120
-159-308-465
-159-308-430
-159-308-600
-159-308-670
30
bearing
6306
6207
159
35
6307
40
6308
L1
L2
465
530
600
670
750
800
900
950
200
250
315
380
465
560
600
670
750
800
900
950
1050
1120
200
250
315
380
465
530
600
670
750
800
900
950
1050
1120
465
530
600
670
475
540
610
680
760
810
910
960
210
260
325
390
475
540
610
680
760
810
910
960
1060
1130
210
260
325
390
475
540
610
680
760
810
910
960
1060
1130
475
540
610
680
a
8
22
11
25
11
32
13
L3
Roll part weight

kg
Total weithg
Kg
499
564
642
712
792
842
942
992
242
292
357
422
507
572
642
712
792
842
942
992
1092
1162
242
292
357
422
507
572
642
712
792
842
942
992
1092
1162
513
578
648
718
14.35
16.15
18.03
19.9
22.34
23.5
26.65
27.82
6.6
8.17
9.97
11.77
14.29
16.09
17.97
19.84
22.28
23.44
26.59
27.76
60.5
32.78
7.37
8.94
10.74
12.54
15.06
16.86
18.74
20.61
23.05
24.21
27.36
28.53
31.27
33.96
16.28
18.44
20.7
22.97
17.52
19.68
21.98
24.25
27.12
28.56
32.26
33.7
8.77
10.72
13.04
15.3
18.45
20.74
23.14
25.54
28.58
30.12
34.02
35.56
39.02
41.86
9.69
11.64
13.93
16.22
19.37
21.66
24.06
26.46
29.5
31.04
34.94
36.48
39.97
43.19
22.06
24.86
27.81
30.76

3.2Impact idlers
--------------------------------bearing size
-------------------------------idler diameter
idler
Roll part weight

kg
Total weithg
Kg
760
798
25.85
43.43
810
848
27.29
36.36
910
948
31
41.04
L2
HG -159-308-750
750
HG -159-308-800
800
HG -159-308-900
900
40
bearing
L3
L1
159
6308
32
13
HG -159-308-950
950
960
998
32.44
42.98
HG -159-308-1050
1050
1060
1098
35.73
47.25
HG -159-308-1120
1120
1130
1168
38.41
50.61
HG -194-207-530
530
540
572
21.83
26.48
HG -194-207-600
600
610
642
24.76
29.94
HG -194-207-670
670
680
712
26.89
32.59
HG -194-207-750
750
760
792
30.01
36.31
800
810
842
32.57
39.25
900
910
942
36.07
43.5
6207
HG -194-207-800
HG -194-207-900
HG -194-207-950
950
960
992
37.82
45.62
HG -194-207-1050
1050
1060
1092
42.13
50.68
HG -194-207-1120
1120
1130
1162
45.07
54.14
HG -194-307-530
530
540
572
22.38
27.18
HG -194-307-600
600
610
642
25.31
30.64
HG -194-307-670
670
680
712
27.44
33.29
HG -194-307-750
750
760
792
30.56
37.01
800
810
842
33.12
39.95
HG -194-307-900
900
910
942
36.62
44.2
HG -194-307-950
950
960
992
38.37
46.32
HG -194-307-1050
1050
1060
1062
42.68
51.38
HG -194-307-1120
1120
1130
1162
45.62
54.84
HG -194-308-530
530
540
578
22.63
29.05
HG -194-308-600
600
610
648
25.56
32.67
HG -194-308-670
670
680
718
27.69
35.48
HG -194-308-750
750
760
798
30.81
39.39
HG -194-307-800
HG -194-308-800
35
194
6307
40
6308
25
32
11
13
800
810
848
33.37
42.44
HG -194-308-900
900
910
948
36.87
46.92
HG -194-308-950
950
960
998
38.62
49.16
HG -194-308-1050
1050
1060
1098
42.93
54.45
HG -194-308-1120
1120
1130
1168
45.87
58.07
66

3.3comb idler
SG-XXX-XXX-XXX---------------------------------idler length
--------------------------------bearing size
-------------------------------idler diameter
----SG comb idlers
idler
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-76-204-465
-76-204-500
-89-204-465
-89-204-465
-89-204-600
-89-204-700
-89-204-750
-89-204-800
-89-204-950
-89-204-1150
-108-205-465
-108-205-500
-108-205-600
-108-205-700
-108-205-750
-108-205-800
-108-205-950
-108-205-1150
-108-204-465
-108-204-600
-108-204-700
-108-204-750
-108-204-800
-108-204-950
-108-204-1150
-108-204-1400
-108-204-1600
-108-205-465
-108-205-600
-108-205-700
-108-205-750
-108-205-800
-108-205-950
-108-205-1150
-108-205-1400
-108-205-1600
-108-305-465
-108-305-600
-108-305-700
-108-305-750
-108-305-800
-108-305-950
-108-305-1150
-108-305-1400
-108-305-1600
-108-206-465
-108-206-600
-108-206-700
bearing
76
20
6204
25
6205
20
6204
89
6205
108
25
6305
30
6206
L1
L2
465
500
465
465
600
700
750
800
950
1150
465
500
600
700
750
800
950
1150
465
600
700
750
800
950
1150
1400
1600
465
600
700
750
800
950
1150
1400
1600
465
600
700
750
800
950
1150
1400
1600
465
600
700
475
510
475
475
610
710
760
810
960
1160
475
510
610
710
760
810
960
1160
475
610
710
760
810
960
1160
1410
1610
475
610
710
760
810
960
1160
1410
1610
475
610
710
760
810
960
1160
1410
1610
475
610
710
14
18
14
18
18
22
L3
493
528
493
493
628
728
778
828
978
1178
493
534
634
734
784
834
981
1184
499
634
734
84
834
984
1184
1434
1634
493
634
734
784
834
984
1184
1434
1634
499
634
734
784
834
984
1184
1434
1634
499
634
734
Roll part weight

kg
4.19
4.48
4.29
4.29
5.39
6.2
6.6
7.09
8.31
10.01
4.81
5.13
6.05
6.96
7.42
7.96
9.33
11.24
5.32
6.62
7.59
8.07
8.69
10.14
12.22
14.91
16.99
6.48
8.12
9.33
9..93
10.68
12.49
15.05
18.07
20.91
5.36
6.64
7.59
8.06
8.68
10.1
12.13
14.78
16.81
5.34
6.62
7.57
Total weithg
Kg
5.53
5.9
5.63
5.63
7.05
8.11
8.64
9.25
10.83
13.02
6.85
7.33
8.63
9..92
10.57
11.3
13.25
15.92
6.67
8.3
9.51
10.12
10.86
12.68
15.24
18.55
21.12
8.54
10.71
12.31
13.1
14.04
16.43
19.75
23.73
27.34
7.54
9.34
10.67
11.33
12.14
14.13
16.93
20.53
23.33
8.35
10.38
11.87

3.3comb idler
--------------------------------bearing size
-------------------------------idler diameter
----SG comb idlers
idler
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
D
-108-206-750
-108-206-800
-108-206-950
-108-206-1150
-108-206-1400
-108-206-1600
-108-306-465
-108-306-600
-108-306-700
-108-306-750
-108-306-800
-108-306-950
-108-306-1150
-108-306-1250
-108-306-1400
-108-306-1600
-133-205-465
-133-205-600
-133-205-700
-133-205-750
-133-205-800
-133-205-900
-133-205-950
-133-205-1000
-133-205-1100
-133-205-1150
-133-205-1250
-133-205-1400
-133-205-1600
-133-205-1800
-133-205-2000
-133-205-2200
-133-205-2500
-133-305-465
-133-305-600
-133-305-700
-133-305-750
-133-305-800
-133-305-900
-133-305-950
-133-305-1000
-133-305-1100
-133-305-1150
-133-305-1250
-133-305-1400
-133-305-1600
-133-305-1800
-133-305-2000
bearing
6206
108
30
6306
6205
133
25
6305
L1
L2
750
800
950
1150
1400
1600
465
600
700
750
800
950
1150
1250
1400
1600
465
600
700
750
800
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
465
600
700
750
800
900
950
1000
1100
1150
1250
1400
1600
1800
2000
760
810
960
1160
1410
1610
475
510
710
760
810
960
1160
1260
1410
1610
475
610
710
760
810
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
475
610
710
760
810
910
960
1010
1110
1160
1260
1410
1610
1810
2010
22
11
18
11
L3
784
834
984
1184
1434
1634
499
634
734
784
834
984
1184
1284
1434
1634
499
634
734
784
834
942
992
1042
1142
1192
1292
1142
1642
1842
2042
2242
2542
499
634
734
784
834
942
992
1042
1142
1192
1292
1442
1642
1842
2042
Roll part weight

kg
8.04
8.66
10.08
12.11
14.76
16.79
8.36
10.47
12.06
12.81
13.73
16.08
19.34
21.28
23.52
26.65
6
7.27
8.2
8.67
9.36
10.3
10.77
11.24
12.17
12.86
14.02
15.65
17.74
20.06
22.15
24.25
27.5
6.4
7.67
8.6
9.07
9.76
10.7
11.17
11.64
12.79
13.26
14.42
16.02
18.14
20.46
22.55
Total weithg
Kg
12.62
13.51
15.76
18.89
22.92
26.06
11.53
14.38
16.5
17.55
18.75
21.92
26.28
28.68
31.84
36.07
8.08
9.86
11.18
11.84
12.72
14.07
14.73
15.39
16.71
17.6
19.14
21.34
24.2
27.28
30.14
33
37.4
8.58
10.36
11.68
12.34
13.22
14.57
15.23
15.89
17.43
18.1
19.64
21.84
27.7
27.78
30.64
68

3.3comb idler
--------------------------------bearing size
-------------------------------idler diameter
----SG comb idlers
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-133-305-2200
-133-305-2500
-133-206-465
-133-206-600
-133-206-700
-133-206-750
-133-206-800
-133-206-900
-133-206-950
-133-206-1000
-133-206-1100
-133-206-1150
-133-206-1250
-133-206-1400
-133-206-1600
-133-206-1800
-133-206-2000
-133-206-2200
-133-206-2500
-133-306-465
-133-306-600
-133-306-700
-133-306-750
-133-306-800
-133-306-900
-133-306-950
-133-306-1000
-133-306-1100
-133-306-1150
-133-306-1250
-133-306-1400
-133-306-1600
-133-306-1800
-133-306-2000
-133-306-2200
-133-306-2500
-159-205-465
-159-205-600
-159-205-700
-159-205-750
-159-205-800
-159-205-900
-159-205-950
-159-205-1000
-159-205-1100
-159-205-1150
-159-205-1250
-159-205-1400
-159-205-1600
30
6205
159
25
6306
159
25
6205
2200
2500
465
600
700
750
800
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
465
600
700
750
800
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
465
600
700
750
800
900
950
1000
1100
1150
1250
1400
1600
2210
2510
475
610
710
760
810
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
475
610
710
760
810
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
475
610
710
760
8910
910
960
1010
1110
1160
1260
1410
1610
18
11
11
22
8/
11
18
11
2242
2542
499
634
734
784
934
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
499
634
734
784
834
934
984
1034
1134
1184
1284
1434
1634
1842
2042
2242
2542
499
634
734
784
834
942
992
1042
1142
1192
1292
1442
1642
24.65
27.9
6.38
7.65
8.58
9.05
9.47
10.68
11.15
11.62
12.55
13.24
14.4
16.03
18.12
20.44
22.53
24.63
27.88
12.1
15.17
17.45
18.59
19.95
22.23
23.37
24.51
26.78
28.14
30.86
34.28
39.06
44.05
48.83
53.39
60.22
9.91
11.75
13.25
14.01
15.17
16.68
17.44
18.19
19.7
20.87
23.19
25.46
28.89
33.5
37.9
9.4
11.41
12.9
13.64
14.61
16.14
16.88
17.63
19.12
20.08
21.79
24.24
27.44
30.86
34.06
37.25
42.16
15.3
19.12
21.94
23.36
24.99
27.82
29.24
30.65
33.48
35.12
38.39
42.62
48.51
54.66
60.53
66.19
74.68
11.79
14.34
16.23
17.18
18.54
20.46
21.4
22.35
24.24
25.6
28.31
31.15
35.34

3.3comb idler
--------------------------------bearing size
-------------------------------idler diameter
----SG comb idlers
idler
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-159-205-1800
-159-205-2000
-159-205-2200
-159-205-2500
-159-305-465
-159-305-600
-159-305-700
-159-305-750
-159-305-800
-159-305-900
-159-305-950
-159-305-1000
-159-305-1100
-159-305-1150
-159-305-1250
-159-305-1400
-159-305-1600
-159-305-1800
-159-305-2000
-159-305-2200
-159-305-2500
-159-206-465
-159-206-600
-159-206-700
-159-206-750
-159-206-800
-159-206-900
-159-206-950
-159-206-1000
-159-206-1100
-159-206-1150
-159-206-1250
-159-206-1400
-159-206-1600
-159-206-1800
-159-206-2000
-159-206-2200
-159-206-2500
-159-206-2800
-159-206-3000
-159-306-465
-159-306-600
-159-306-700
-159-306-750
-159-306-800
-159-306-900
-159-306-950
-159-306-1000
-159-306-1100
-159-306-1150
bearing
6205
25
6305
159
6206
30
6306
L1
L2
1800
2000
2200
2500
465
600
700
750
800
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
465
600
700
750
800
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
2800
3000
465
600
700
750
800
900
950
1000
1100
1150
1810
2010
2210
2510
475
610
710
760
810
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
475
610
710
760
710
9410
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
2810
3010
475
610
710
760
810
910
960
1010
1110
1160
11
18
11
11
22
11
L3
1842
2042
2242
2542
499
634
734
784
834
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
499
634
734
784
834
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
2842
3042
499
634
734
784
834
942
992
1042
1142
1192
Roll part weight

kg
32.73
36.15
39.58
44.93
10.05
12.09
13.59
14.35
15.51
17.02
17.78
18.53
20.04
21.21
35.53
25.8
29.23
33.07
36.47
39.92
45.27
10.03
12.07
13.57
14.33
15.49
17
17.76
18.51
20.02
21.09
23.51
25.78
29.21
33.05
36.74
39.9
45.25
50.6
54.44
10.25
12.29
13.79
14.55
15.3
16.81
17.98
18.73
20.24
21.41
Total weithg
Kg
39.94
44.14
48.33
54.83
12.24
14.79
16.68
17.63
18.99
20.91
21.85
22.8
24.69
26.05
28.76
31.6
35.79
40.39
44.59
48.78
55.28
13.04
15.82
17.88
18.91
20.35
22.45
23.48
24.51
26.57
28.01
30.89
33.99
38.52
43.46
47.99
52.52
59.52
66.52
71.46
13.42
16.2
18.26
19.29
20.32
22.42
23.85
24.85
26.95
28.89
70

3.3comb idler
--------------------------------bearing size
-------------------------------idler diameter
----SG comb idlers
idler
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
D
-159-306-1250
-159-306-1400
-159-306-1600
-159-306-1800
-159-306-2000
-159-306-2200
-159-306-2500
-159-306-2800
-159-306-3000
-159-207-600
-159-207-750
-159-207-900
-159-207-950
-159-207-1000
-159-207-1100
-159-207-1150
-159-207-1250
-159-207-1400
-159-207-1600
-159-207-1800
-159-207-2000
-159-207-2200
-159-207-2500
-159-207-2800
-159-207-3000
-159-207-3150
-159-207-3350
-159-307-600
-159-307-750
-159-307-900
-159-307-950
-159-307-1000
-159-307-1100
-159-307-1150
-159-307-1250
-159-307-1400
-159-307-1600
-159-307-1800
-159-307-2000
-159-307-2200
-159-307-2500
-159-207-2800
-159-307-3000
-159-307-3150
-159-307-3350
-159-308-900
-159-308-1000
30
bearing
6306
6207
159
35
6307
159
40
6308
L1
L2
1250
1400
1600
1800
2000
2200
2500
2800
3000
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
2800
3000
3150
3350
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
2800
3000
3150
3350
900
1000
1260
1410
1610
1810
2010
2210
2510
2810
3010
610
760
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
2810
3010
3160
3360
610
760
910
960
1010
110
1160
1260
1410
1610
1810
2010
2210
2510
2810
3010
3160
3360
910
1010
22
11
25
11
32
13
L3
1290
1442
1642
1842
2042
2242
2542
2842
3042
642
792
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
2842
3042
3192
3392
642
792
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2512
2842
3042
3192
3392
948
1048
Roll part weight

kg
23.73
36
29.43
33.27
36.69
40.12
45.47
50.85
54.66
12.23
14.49
17.16
17.92
48.67
20.18
21.35
23.67
25.94
29.37
33.21
36.63
40.06
45.41
50.76
54.6
57.27
60.7
13
15.26
17.93
18.69
19.44
20.92
22.12
24.44
26.71
30.14
33.98
37.4
40.83
46.18
51.53
55.37
58.04
61.47
23.21
25.27
Total weithg
Kg
31.27
34.37
38.9
43.84
48.37
52.9
59.9
66.6
71.84
17.4
20.79
24.59
25.72
26.85
29.11
60.62
33.73
37.11
42.04
47.38
52.31
57.24
64.84
72.43
77.77
81.57
86.5
18.32
21.71
25.51
26.64
27.77
30.03
31.57
34.65
38.03
42.96
48.3
53.16
58.16
65.76
73.35
78.69
82.49
87.42
33.25
36.3

3.3comb idler
--------------------------------bearing size
-------------------------------idler diameter
----SG comb idlers
idler
bearing
L1
L2
L3
Roll part weight

kg
Total weithg
Kg
SG -159-308-1100
1100
1110
1148
27.33
39.34
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-159-308-1250
-159-308-1600
-159-308-1800
-159-308-2000
-159-308-2200
-159-308-2500
-159-308-2800
-159-308-3000
-159-308-3150
-159-308-3350
-194-207-1100
-194-207-1250
-194-207-1600
-194-207-1800
-194-207-2000
1250
1600
1800
2000
2200
2500
2800
3000
3150
3350
1100
1250
1600
1800
2000
1260
1610
1810
2010
2210
2510
2810
3010
3160
3360
1110
1260
1610
1810
2010
1298
1648
1848
2048
2248
2548
2848
3042
3198
3398
1142
1292
1642
1842
2042
30.43
37.65
53.6
47.14
51.68
58.69
65.7
70.65
74.16
78.7
28.71
31.53
38.11
43.2
47.63
43.91
54.56
61.47
67.96
74.46
84.41
94.36
101.27
106.25
112.74
37.64
41.58
50.78
57.38
63.61
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
SG
-194-207-2200
-194-207-2500
-194-207-2800
-194-207-3000
-194-207-3150
-194-207-3350
-194-307-1100
-194-307-1250
-194-307-1600
-194-307-1800
-194-307-2000
-194-307-2200
-194-307-2500
-194-307-2800
-194-307-3000
-194-307-3150
-194-307-3350
-194-308-1100
-194-308-1250
-194-308-1600
-194-308-1800
-194-308-2000
-194-308-2200
-194-308-2500
-194-308-2800
-194-308-3000
-194-308-3150
-194-308-3350
2200
2500
2800
3000
3150
3350
1100
1250
1600
1800
2000
2200
2500
2800
3000
315
3350
1100
1250
1600
1800
2000
2200
2500
2800
3000
3150
3350
2210
2510
2810
3010
3160
6630
1110
1260
1610
1810
2010
2210
2510
2810
3010
3160
3360
1110
1260
1610
1810
2010
2210
2510
2810
3010
3160
3360
2242
2542
2842
3042
3192
3392
1142
1292
1642
1842
2042
2242
2542
2842
3042
3192
3392
1148
1298
1648
1848
2048
2248
2548
2848
3048
3198
3398
52.06
59.04
66.01
71.11
74.6
79.03
28.71
31.53
38.11
43.2
47.63
52.06
59.04
66.01
71.11
74.6
79.03
29.51
32.33
38.91
44
48.43
52.86
59.84
66.81
71.91
75.4
79.83
69.24
78.46
87.69
94.29
98.9
104.83
37.79
41.73
50.93
57.53
63.46
69.39
78.61
87.84
94.44
99.05
104.98
41.52
45.08
55.81
62.87
69.26
75.64
85.56
95.48
102.53
107.49
113.88
159
40
6308
6207
35
194
6307
40
6308
32
13
25
11
32
13
72

3.4Spiral idlers
LG-XXX-XXX-XXX---------------------------------idler length
--------------------------------bearing size
------------------------------idler diamete
---LG Spiral idlers
idler
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
D
-76-204-500
-89-204-500
-89-204-600
-89-204-750
-89-204-950
-89-204-1150
-89-205-500
-89-205-600
-89-205-750
-89-205-950
-89-205-1150
-108-204-600
-108-204-750
-108-204-950
-108-204-1150
-108-204-1400
-108-204-1600
-108-205-600
-108-205-750
-108-205-950
-108-205-1150
-108-205-1400
-108-205-1600
-108-305-600
-108-305-750
-108-305-950
-108-305-1150
-108-305-1400
-108-305-1600
-108-206-600
-108-206-750
-108-206-950
-108-206-1150
-108-206-1400
-108-206-1600
-108-306-600
-108-306-750
-108-306-950
-108-306-1150
-108-306-1400
-108-306-1600
-133-205-600
-133-205-750
-133-205-900
-133-205-950
-133-205-1000
-133-205-1100
-133-205-1150
-133-205-1250
-133-205-1400
bearing
76
20
6204
25
6205
20
6204
89
6205
25
108
6305
6206
30
6306
133
25
6205
L1
L2
500
500
600
750
950
1150
500
600
450
950
1150
600
750
950
1150
1400
1600
600
750
950
1150
1400
1600
600
750
950
1150
1400
1600
600
750
950
1150
1400
1600
600
750
950
1150
1400
1600
600
750
900
950
1000
1100
1150
1250
1400
510
510
640
760
960
1160
510
610
760
960
1160
610
760
960
1160
1410
1610
610
760
960
1160
1410
1610
610
760
960
1160
1410
1610
610
760
960
1160
1410
1610
610
760
960
1160
1410
1610
610
760
910
960
1010
1110
1160
1260
1410
14
18
14
18
18
22
22
22
8
8
18
11
L3
528
528
628
778
978
1178
834
634
784
984
1184
628
778
978
1178
1428
1628
634
784
984
1184
1434
1634
634
784
984
1184
1434
1634
634
784
984
1184
1434
1634
634
784
984
1184
1434
1634
634
784
942
992
1042
1142
1192
1292
1442
Roll part weight

kg
5.83
9.63
11.58
14.29
18.18
22.08
8.06
9.69
11.93
15.19
18.45
10.99
13.39
16.97
20.56
24.75
28.34
11.01
13.41
16.99
20.58
24.77
28.36
11.13
13.53
17.11
20.7
24.89
28.48
11.11
13.51
17.09
20.67
24.87
28.46
11.52
13.92
17.5
21.09
25.28
28.87
13.38
16+.31
19.58
20.67
21.75
23.93
23.68
25.86
28.8
Total weithg
Kg
7.25
11.06
13.25
16.32
20.7
25.08
10.23
12.25
15.06
19.08
23.11
12.65
15.43
19.5
13.57
28.38
32.45
13.6
16.58
20.93
25.28
30.43
34.78
13.82
16.8
21.15
25.5
30.65
35
14.84
18.07
22.76
27.44
33.05
37.7
15.41
18.64
23.33
28.01
33.59
38.27
15.97
19.48
23.35
24.63
25.91
28.48
28.52
31.08
34.48

3.4Spiral idlers
--------------------------------bearing size
------------------------------idler diamete
---LG Spiral idlers
idler
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
D
-133-205-1600
-133-205-1800
-133-205-2000
-133-205-2200
-133-205-2500
-133-305-600
-133-305-750
-133-305-900
-133-305-950
-133-305-1000
-133-305-1100
-133-305-1150
-133-305-1250
-133-305-1400
-133-305-1600
-133-305-1800
-133-305-2000
-133-305-2200
-133-305-2500
-133-206-600
-133-206-750
-133-206-900
-133-206-950
-133-206-1000
-133-206-1100
-133-206-1150
-133-206-1250
-133-206-1400
-133-206-1600
-133-206-1800
-133-206-2000
-133-206-2200
-133-206-2500
-133-306-600
-133-306-750
-133-306-900
-133-306-950
-133-306-1000
-133-306-1100
-133-306-1150
-133-306-1250
-133-306-1400
133-306-1600
-133-306-1800
-133-306-2000
-133-306-2200
-133-306-2500
-159-205-600
-159-205-750
-159-207-900
bearing
6205
25
6305
133
6206
30
6306
6306
159
25
6205
L1
L2
1600
1800
2000
2200
2500
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
600
750
900
1610
1810
2010
2210
2510
610
760
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
610
760
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
610
760
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
610
760
910
18
11
18
11
11
22
8
11
18
8
11
L3
1643
1842
2042
2242
2542
634
784
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
634
784
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
634
784
934
984
1034
1134
1184
1284
1434
1634
1842
2042
2242
2542
634
784
942
Roll part weight

kg
32.82
36.84
40.86
44.88
51.08
13.72
16.65
19.92
21.01
22.09
24.27
24.02
26.2
29.14
33.16
37.18
41.2
45.22
51.42
13.7
16.63
19.9
20.99
22.07
24.25
24
26.18
29.12
33.14
37.16
41.18
45.2
51.4
13.92
16.85
20.12
21.12
22.29
24.47
24.22
216.4
29.34
33.36
37.38
41.4
45.52
51.62
15.91
19.54
23.17
Total weithg
Kg
39.27
44.06
48.85
53.63
60.98
16.41
19.92
23.79
25.07
26.35
28.91
28.86
31.42
34.92
39.71
44.5
49.29
54.07
61.42
17.45
21.21
25.35
216.71
28.08
30.81
30.83
33.56
37.32
42.45
47.57
52.69
57.82
66.67
17.83
21.56
25.68
27.05
28.41
31.14
31.17
33.9
37.66
42.78
47.95
53.07
58.2
66.05
18.51
22.71
26.94
74

3.4Spiral idlers
--------------------------------bearing size
------------------------------idler diamete
---LG Spiral idlers
idler
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
D
-159-205-950
-159-205-1000
-159-205-1100
-159-205-1150
-159-205-1250
-159-205-1400
-159-205-1600
-159-205-1800
-159-205-2000
-159-205-2200
-159-205-2500
-159-305-600
-159-305-750
-159-305-900
-159-305-950
-159-305-1000
-159-305-1100
-159-305-1150
-159-305-1250
-159-305-1400
-159-305-1600
-159-305-1800
-159-305-2000
-159-305-2200
-159-305-2500
-159-206-600
-159-206-750
-159-206-900
-159-206-950
-159-206-1000
-159-206-1100
-159-206-1150
-159-206-1250
-159-206-1400
-159-206-1600
-159-206-1800
-159-206-2000
-159-206-2200
-159-206-2500
-159-206-2800
-159-206-3000
-159-306-600
-159-306-750
-159-306-900
-159-306-950
-159-306-1000
-159-306-1100
-159-306-1150
bearing
6205
25
6305
129
6206
30
6306
L1
L2
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
2800
3000
600
750
900
950
1000
1100
1150
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
610
760
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
610
760
910
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
2800
3000
610
760
910
960
1010
1110
1160
11
18
11
11
22
11
L3
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
634
784
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
634
784
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
2842
3042
634
784
942
992
1042
1142
1192
Roll part weight

kg
24.51
25.86
28.14
29.48
32.17
35.08
40.77
45.71
50.71
55.68
63.34
16.11
19.74
23.37
24.71
26.06
28.34
29.68
32.37
36
40.97
45.94
50.91
55.88
63.54
16.08
19.71
23.34
24.68
26.06
28.31
29.65
32.34
35.97
40.94
45.91
50.88
55.85
6.51
71.17
76.14
16.31
19.94
23.57
24.91
26.26
28.54
29.88
Total weithg
Kg
28.48
30.01
32.68
34.21
37.28
41.49
47.22
52.96
58.7
64.43
73.24
18.81
23.01
27.24
28.78
30.31
32.98
34.51
37.58
41.19
47.52
53.26
59
64.73
73.54
19.85
24.3
28.8
30.42
32.04
34.87
36.49
39.73
44.18
50.26
56.33
62.4
68.48
77.79
87.1
93.17
20.23
24.68
29.18
30.8
32.42
35.25
36.87

3.4Spiral idlers
--------------------------------bearing size
------------------------------idler diamete
---LG Spiral idlers
idler
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
D
-159-306-1250
-159-306-1400
-159-306-1600
-159-306-1800
-159-306-2000
-159-306-2200
-159-306-2500
-159-306-2800
-159-306-3000
-159-207-600
-159-207-750
-159-207-900
-159-207-950
-159-207-1000
-159-207-1100
-159-207-1150
-159-207-1250
-159-207-1400
-159-207-1600
-159-207-1800
-159-207-2000
-159-207-2200
-159-207-2500
-159-207-2800
-159-207-3000
-159-207-3150
-159-207-3350
-159-307-600
-159-307-750
-159-307-900
-159-307-950
-159-307-1000
-159-307-1100
-159-307-1150
-159-307-1250
-159-307-1400
-159-307-1600
-159-307-1800
-159-307-2000
-159-307-2200
-159-307-2500
-159-307-2800
-159-307-3000
-159-307-3150
-159-307-3250
-159-308-900
-159-308-1000
-159-308-1100
bearing
6207
159
35
6307
40
6308
L1
L2
1250
1400
1600
1800
2000
2200
2500
2800
3000
600
750
900
950
1000
1100
1150
1250
1400
1600
1800
2000
2200
2500
2800
3000
3150
3350
600
750
900
950
1000
1100
150
1250
1400
1600
1800
2000
2200
2500
2800
3000
3150
3250
900
1000
1100
1260
1410
1610
1810
2010
2210
2510
2810
3010
610
760
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
2810
3010
3160
3360
610
760
910
960
1010
1110
1160
1260
1410
1610
1810
2010
2210
2510
2810
3010
3160
3360
910
1010
1110
22
11
25
11
32
13
L3
1292
1442
1642
1842
2042
2242
2542
2842
3042
642
792
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
2842
3042
3192
3392
642
792
942
992
1042
1142
1192
1292
1442
1642
1842
2042
2242
2542
2842
3042
3192
3392
948
1048
1148
Roll part weight

kg
32.57
36.2
41.17
46.17
51.11
56.08
63.71
71.4
76.37
16.25
19.88
23.51
24.85
26.2
28.48
29.82
32.51
36.14
41.11
46.08
51.05
56.02
63.68
71.34
76.31
79.91
94.91
16.8
20.43
24.06
25.4
26.75
29.03
30.37
33.06
36.69
41.66
46.63
54.6
56.57
64.23
71.89
76.86
80.49
85.46
24.06
26.75
29.03
Total weithg
Kg
40.11
44.56
50.64
56.71
62.78
68.86
78
17
87.48
93.55
21.43
26.18
30.93
32.65
34.37
37.4
39.12
42.56
47.31
53.78
60.26
66.72
83.11
93.02
99.49
104.24
110.71
22.13
26.88
31.63
33.35
35.07
38.1
39.86
43.26
48.01
54.48
60.96
67.43
73.9
83.81
93.72
100.94
104.94
111.41
34.11
37.77
41.04
76

3.4Spiral idlers
--------------------------------bearing size
------------------------------idler diamete
---LG Spiral idlers
idler
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
LG
D
-159-308-1250
-159-308-1600
-159-308-1800
-159-308-2000
-159-308-2200
-159-308-2500
-159-308-2800
-159-308-3000
-159-308-3150
-159-308-3350
-159-207-900
-159-207-1000
-159-207-1100
-159-207-1250
-159-207-1600
-159-207-1800
-159-207-2000
-159-207-2200
-159-207-2500
-159-207-2800
-159-207-3000
-159-207-3010
-159-207-3350
-194-307-900
-194-307-1000
-159-307-1100
-194-307-1250
-194-307-1600
-194-307-1800
-194-307-2000
-194-307-2200
-194-307-2500
-194-307-2800
-194-307-3000
-194-307-3010
-194-307-3350
-194-308-900
-194-308-1000
-159-308-1100
-194-308-1250
-194-308-1600
-194-308-1800
-194-308-2000
-194-308-2200
-194-308-2500
-194-308-2800
-194-308-3000
-194-308-3010
LG -194-308-3350
159
40
bearing
6308
6207
35
6307
194
40
6308
L1
L2
1250
1600
1800
2000
2200
2500
2800
3000
3150
3350
900
1000
1100
1250
1600
1800
2000
2200
2500
2800
3000
3150
3350
900
1000
1100
1250
1600
1800
2000
2200
2500
2800
3000
3150
3350
900
1000
1100
1250
1600
1800
2000
2200
2500
2800
3000
3150
1260
1610
1810
2010
2210
2510
2810
3010
3160
3360
910
1010
1110
1260
1610
1810
2010
2210
2510
2810
3010
3160
3360
910
1010
1110
1260
1610
1810
2010
2210
2510
2810
3010
3160
3360
910
1010
1110
1260
1610
1810
2010
2210
2510
2810
3010
3160
3350
3360
32
13
25
11
32
13
1298
1648
1848
2048
2248
2548
2848
3048
3198
3398
942
1042
1142
1292
1642
1842
2042
2242
2542
2842
3042
3192
3392
942
1042
1142
1292
1642
1842
2042
2242
2542
2842
3042
3192
3392
942
1042
1142
1292
1642
1842
2042
2242
2542
2842
3042
3192
Roll part weight

kg
33.06
42.01
46.98
51.95
56.92
65.58
72.24
77.21
80.84
85.81
24.41
27.1
29.38
33.41
41.39
46.36
51.33
56.3
63.96
71.62
76.59
80.22
85.19
23.79
26.48
28.76
32.79
52.06
47.03
52
56.97
64.63
72.29
77.26
80.89
85.86
24.46
27.15
29.43
33.46
42.31
47.28
52.25
57.22
64.88
72.54
77.51
81.14
Total weithg
Kg
46.54
58.91
65.84
72.77
79.71
90.3
100.9
107.83
112.93
119.86
31.83
35.27
38.3
43.46
54.06
60.54
67.01
73.048
83.39
93.3
99.77
104.52
110.99
31.36
34.8
37.83
42.99
54.88
61.36
67.83
74.3
84.21
94.12
100.59
105.34
111.81
34.51
38.17
41.44
46.94
59.21
66.14
73.07
80.01
90.6
101.2
108.13
113.23
3392
86.11
120.16
L3

3.5Friction idler
MG-XXX-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------idler full length
--------------------------------- flat idler length
---------------------------------idler diamete
-----MG flat friction idlers
size
MG
500 MG
MG
MG
650 MG
MG
MG
MG
800
MG
MG
MG
1000 MG
MG
MG
1200 MG
MG
MG
1400 MG
MG
-63.5-230-323-204
-76-228-323-204
-89-228-323-204
-76-303-398-204
-89-303-398-204
-108-288-398-205
-89-378-473-204
-89-393-488-204
63.5
76
89
76
89
108
89
89
-108-378-488-205
-133-378-488-305
-108-480-590-205
-133-480-590-305
-159-471-590-306
-108-580-690-205
-133-580-690-305
-159-571-690-306
-108-680-790-205
-133-680-790-305
-159-671-790-306
108
133
108
133
159
108
133
159
108
133
159
size
MG
500 MG
MG
MG
501 MG
MG
MG
-63.5-500-686-204
-76-500-690-204
-89-500-690-205
-76-650-840-204
-89-650-840-204
-108-650-870-205
-89-800-990-204
MG
MG
MG
-89-800-990-204
-108-800-1020-205
-133-800-1020-305
800
D
63.5
76
89
76
89
108
89
108
133
MG
MG
1000
MG
MG
-108-1000-1220-205
-108-1000-1220-305
-133-1000-1220-305
-159-1000-1238-306
MG
1200 MG
MG
-108-1200-1420-205
-133-1200-1420-305
-159-1200-1438-306
108
133
159
MG
-108-1400-1620-205
108
1400 MG
MG
-133-1400-1620-305
-159-1400-1638-306
133
159
108
133
159
bearing
D1
L
230
25
6205
140
157
170
157
170
210
20
6204
170
6205
6305
6205
6305
6306
6205
6305
6306
6205
6305
6306
210
240
210
240
270
210
240
270
210
240
270
20
25
30
25
30
25
30
6204
bearing
20
6204
25
6205
20
6204
25
20
6205
6204
25
6305
6205
6305
25
30
25
30
6205
6306
6305
6306
25
30
25
30
228
303
288
378
393
378
L1
L2
232
333
398
14
483
488
690
498
426
18
14
580
590
790
571
680
600
800
671
D1
L1
140
157
170
157
170
210
686
696
690
700
840
624
22
11
630
18
724
22
11
730
18
824
22
11
830
14
18
850
14
870
880
170
990
1000
18
14
8
6
210
240
1020
1030
18
1220
1230
1238
1248
22
18
22
11
8
11
1254
1260
1264
1288
1420
1430
18
1454
1438
1448
22
11
1478
1620
1630
18
1654
1638
1648
22
11
1678
6205
6305
6306
210
240
270
6205
210
6305
6306
240
270
20.54
29.1
240
270
12.34
18.83
522
L2
170
11.68
432
501
516
700
471
T
kg)
10.76
408
473
Roll part
weightkg
351
18
480
L3
a
714
718
724
828
828
904
1018
1024
1054
1054
L3
Roll part
weightkg
78

3.6cone idler
MG-XXX-XXX-XXX-XXX---------------------------------bearing size
-----------------------------------full length
--------------------------------- flat idler length
---------------------------------idler diamete
-----ZG cone idler
type
size
ZG -89-133-340-204
D1
D2
89
133
bearing
20
6204
ZG -89-133-340-205
159
DTII type
6305
350
L3
Middle idler size
368
14
89*250
18
374
415
425
108*315
449
176
30
133
6306
500
510
540
B/w
800
108*205
108
ZG -108-176-500-306
22
11
6.25
8.45
1000
9.12
133*315
9.12
108*380
10.77
133*380
194
weight
kg
1200
159*380
10.77
13.79
ZG -108-176-550-305
25
6305
584
18
108*165
11.84
ZG -108-176-550-306
30
6306
590
22
11
108*465
13.04
ZG -108-176-550-305
25
6305
584
18
133*165
ZG -108-175-550-306
30
6306
590
22
11
133*465
13.21
25
6305
584
18
159*465
13.44
30
6306
590
22
11
159*465
14.63
18
ZG -133-194-550-305
108
133
176
194
ZG -133-194-550-306
ZG -89-133-340-205
89
133
6205
ZG -108-159-415-305
550
340
560
350
108*250
374
25
ZG -108-159-340-205
108
415
ZG -108-176-500-305
425
499
133*315
30
6306
455
22
11
159*315
176
25
6305
534
18
133*380
500
540
ZG -133-194-500-306
133
794
30
6306
540
22
11
159*380
ZG -108-176-550-305
108
176
25
6305
584
18
133*465
ZG -133-194-550-306
133
194
30
6306
590
22
11
159*465
ZG
-108-159-445-305
159
445
25
ZG
-108-176-560-305
550
560
455
479
6305
176
18
560
570
594
680
690
750
1400
800
12.02
8.45
133*250
6305
159
ZG -108-159-415-306
DTII type same as

DTIIA
DTIItypeAtype
340
6205
ZG -108-176-500-306
ZG -133-194-500-306
L2
25
ZG -108-159-415-305
ZG -108-159-415-305
L1
1000
9.12
1200
13.79
1400
12.02
14.63
1000
8.31
1200
11.71
1400
16.4
108
ZG
-108-194-680-306
194
ZG
-108-194-780-306
30
6306
22
780
790
820
11
17.88

4.TD75 type fixed belt conveyer idlers
flat carrying / return
B 500-1400
Note:
1. the fasten unite connected with the frame were included in this drawing.
2. there are two kinds of bearing seat type :seamless steel pipe stamped bearing seat; cast
iron bearing seat; spindle are identified in two type too : cold drawn and ladder type.
3. the weight of idlers made of cold drawn spindle and stamped bearing seat shown in the
sheet. The idler which made of cast iron bearing seat and ladder spindle are filled in the
( ).
4. if no special requirement to bearing seat and pipe, the factory would select them
according factory standard.
trough idler and impact idler
B500-1400
trough idlers
L1
rubber ring impact idlers
H1
500
720
600
760
210
650
870
750
910
230
800
1070
950
1110
240
1000
1300
1150
1350
H2
55.5
80
300
1200
1550
1400
1610/1600
330
1400
1750
1600
1810/1800
350
46
108
170
130
/100
/60
220
17
/130
/80
260
200
/130
/80
elastic stand type impact idler
bearing
M12
M16
201
305
Flat carrying idlers
Flat return idlers
weight
drawing
weight
idlers
15(16)
TD1C2
10(12)
TD1C3
17(19)
TD2C2
12(14)
TD2C3
21(23)
TD3C2
14(19)
TD3C3
37(41)
TD4C2
23(27)
TD4C3
48(54)
TD5C2
27(32)
TD5C3
55(61)
TD6C2
31(36)
TD6C3
note:
1. the fasten unite connected with the frame were included in this drawing.
2. there are three idler type: seamless steel pipe stamped bearing seat; cast iron bearing
seat and strengthen plastic idlers; spindle are identified in two type too : cold drawn and
ladder type.
3. the weight of idlers made of cold drawn spindle and stamped bearing seat shown in the
( ). The plastic idlers is lighter than steel idler, the date list as following sheet.
B
500
650
800
1000
1200
1400
7.5
12
14
17
80

4. if no special requirement to bearing seat and pipe, the factory would select them
500
720
190
L1
760
H1
870
240
910
230
800
1070
305
110
240
1000
1300
375
1350
300
1200
1550
455
1610
330
170
89
210
108
230
1750
525
1810
Ball
bearing
210
650
1400
350
170
130
/60
220
170
/80
260
/130
200
/80
M12
M16
201
305
elastic stand
type impact
idler
Trough idlers
rubber ring
impact idlers
weight
drawing
weight
drawing
weight
idlers
17(21)
TD1C1
23(27)
TD1C7
21
TD1C9
29(31)
TD2C1
29(31)
TD2C7
25
TD2C9
33(37)
TD3C1
33(37)
TD3C7
30
TD3C9
53(62)
TD4C1
53(62)
TD4C7
52
TD4C9
55(64)
TD5C1
62(71)
TD5C7
68
TD5C9
61(71)
TD6C1
78(87)
TD6C7
77
TD6C9
Trough self-centering idler

B500-1400
Note:
1.
2.
3.
4.
the fasten unite connected with the frame were included in this drawing.
there are three idler type: seamless steel pipe stamped bearing seat; cast iron
bearing seat and strengthen plastic idlers; spindle are identified in two type too :
cold drawn and ladder type.
the weight of idlers made of cold drawn spindle and stamped bearing seat
shown in the sheet. The idler which made of cast iron bearing seat and ladder
spindle are filled in the ( ). The plastic idlers is lighter than steel idler, the date list
as following sheet.
if no special requirement to bearing seat and pipe, the factory would select them
L1
L2
500
720
190
770
588
650
870
240
920
728
800
1070
305
1120
864
1000
1300
375
1350
1088
1200
1550
455
1600
1272
89
H1
170
1750
525
1800
1472
170
210
108
170
130
220
170
260
200
230
230
1400
M12
M16
Ball bearing weightkg drawing
204
305
10(44)
TD1C4
45(48)
TD2C4
50(54)
TD3C4
74(82)
TD4C4
84(93)
TD5C4
92(102)
TD6C4

Flat carrying / return self centering idler
B 500-1400
Note:
1.
2.
3.
4.
the fasten unite connected with the frame were included in this drawing.
there are three idler type: seamless steel pipe stamped bearing seat; cast iron bearing
seat and strengthen plastic idlers; spindle are identified in two type too : cold drawn and
ladder type.
the weight of idlers made of cold drawn spindle and stamped bearing seat shown in the
( ). The plastic idlers is lighter than steel idler, the date list as following sheet.
if no special requirement to bearing seat and pipe, the factory would select them
H1
L1
500
166
720
600
770
628/628
650
186
870
750
920
778/778
800
196
1070
950
1120
928/928
1000
246
1300
1150
1360
1160/1168
Ball
bearing
Flat carrying
self-centering idlers
Flat return
self-centering idlers
Weight (kg) drawing Weight (kg) drawing
1200
276
1550
1400
1610
1360/1368
1400
296
1750
1600
1810
1560/1568
89
108
170
230
170
130
/130
/60
220
170
/130
/80
260
200
/130
/80
M12
M16
204
305
3839
TD1C5
41(43)
TD1C6
4144
TD2C5
45(47)
TD2C6
4850
TD3C5
51(53)
TD3C6
6873
TD4C5
71(75)
TD4C6
7883
TD5C5
81(85)
TD5C6
8691
TD6C5
83(93)
TD6C6
82

Heavy duty impact idler
elastic steel board heavy

heavy duty impact idlers
B 1000-1400
Note:
Rubber ring type heavy duty impact idlers
1.this type only adopt in heavy duty conveyers

that handling ability from 1.6t/m3 to 2.5t/m3
and the materials feeding height can not
reduced condition.
2.the weight of idlers made of cold drawn
spindle and stamped bearing seat shown in the
sheet. The idler which made of cast iron bearing
seat and ladder spindle are filled in the ( ).
1. angel steel 90x90x8 connected with ground

bolt.
L1
H1
H2
Elastic steel board heavy

duty impact idlres
Rubber ring type heavy

duty impact idlers
weight
drawings
weight
drawings
100
1300
375
1440
300
856
1100
456488
TD4C8
499
TD4C10
1200
1500
455
1690
330
846
1130
509545
TD5C8
531
TD5C10
1400
1750
525
1890
350
826
1145
575613
TD6C8
569
TD6C10
We also manufacture idlers according the customers needs:

requires such as
Re-greasable idlers
Damping idlers
Single direction idlers
Suspend idlers
Spring impact idlers
Spiral rubber idlers
Rubber covered idlers/ Polymer covered idlers
GG.X new composite material idlersrust proof anti static electric
Drum type self centering idlers
We not only manufacture idlers according GB,MT standard, But also dealing idler made
to ISO stand, ANSI,din,bs,jis NF,TOCT standard to comply different customers requirements.
We would deliver special design service to satisfy your special working requires.

Catalogue Idlers PDF

Uploaded by

Copyright:

Available Formats

Catalogue Idlers PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue Idlers PDF

Uploaded by

Copyright:

Available Formats

GUANGHUAN CONVEYER IDLERS CO.

1.1 Idlers identify

GUANGHUAN CONVEYER IDLERS CO.,LTD

Flat return idlers:

GUANGHUAN CONVEYER IDLERS CO.,LTD

1.2 The choice of idlers diameter and idler rotate rate.

GUANGHUAN CONVEYER IDLERS CO.,LTD

The space between return idlers is about 2.4m~3m.

Steel core belt

GUANGHUAN CONVEYER IDLERS CO.,LTD

GUANGHUAN CONVEYER IDLERS CO.,LTD

ao---space between carrying idlers ,m

--load rate see

Qb belt quality in one meter

V belt travel speed

Pu return idler , static load ,

au space between return idlers

P0-- carrying idlers dynamic load

P0-- return idlers dynamic load

fs operation rate see sheet 6

V type double rollers

Running typehours/ day

Belt travel speed ,m/s

>150-300 some big granule mixed

>150-300 big agglomeration mixed

In normal condition and maintain

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

Length mm Belt speedm/s

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

idler extreme load ability (10,service life: 50000hs) Unit : KN

idler extreme load ability (10,service life: 50000hs) Unit : KN

GUANGHUAN CONVEYER IDLERS CO.,LTD

GUANGHUAN CONVEYER IDLERS CO.,LTD

425 325 213 213 607 629 721

300 240 M16

440 232 213 213 639 670 770

340 270 M16

470 248 223 223 694 725 828

495 258 236 236 718 749 850

340 270 M16

530 278 253 253 753 783 884

515 264 236 236 750 778 885

340 270 M16

550 280 253 253 783 812 920