Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    High-Speed Synchronous Short-Range Modem With A Wide Range of Serial and Ethernet Interfaces

    Uploaded by

    Nguyen Thanh Long
    The document provides information about the ASM-40 high-speed short-range modem, including that it operates full-duplex over unconditioned lines up to 1.75 km, supports various serial and Ethernet interfaces, and line coding standards. It also lists specifications, interfaces, accessories, and ordering information for the modem.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    High-Speed Synchronous Short-Range Modem With A Wide Range of Serial and Ethernet Interfaces

    Uploaded by

    Nguyen Thanh Long
    21 views4 pages
    The document provides information about the ASM-40 high-speed short-range modem, including that it operates full-duplex over unconditioned lines up to 1.75 km, supports various serial and Ethernet interfaces, and line coding standards. It also lists specifications, interfaces, accessories, and ordering information for the modem.

    Original Description:

    ASM-40

    Original Title

    4188_ASM-40

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information about the ASM-40 high-speed short-range modem, including that it operates full-duplex over unconditioned lines up to 1.75 km, supports various serial and Ethernet interfaces, and line coding standards. It also lists specifications, interfaces, accessories, and ordering information for the modem.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views4 pages

    High-Speed Synchronous Short-Range Modem With A Wide Range of Serial and Ethernet Interfaces

    Uploaded by

    Nguyen Thanh Long
    The document provides information about the ASM-40 high-speed short-range modem, including that it operates full-duplex over unconditioned lines up to 1.75 km, supports various serial and Ethernet interfaces, and line coding standards. It also lists specifications, interfaces, accessories, and ordering information for the modem.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Data Sheet

    ASM-40
    High-speed Short-range Modem

    High-speed
    synchronous
    short-range modem
    with a wide range of
    serial and Ethernet
    interfaces

    High-speed short-range synchronous modem


    Full-duplex over unconditioned 4-wire lines or BNC coaxial cable
    HDB3, AMI, or B8ZS line coding for extending the operation range to 1.75 km (1 mile)
    2048, 1544, 1536, or 1920 kbps line rate
    Wide range of serial and Ethernet DTE interfaces, with 13 user-selectable data rates

    ASM-40 is a synchronous short-range


    modem that operates full-duplex over
    4-wire lines or BNC coaxial cable. The
    modem extends data transmission range
    up to 1.75 km (1 mile).
    The device employs HDB3, AMI, or B8ZS
    line coding in compliance with G.703
    requirements.

    ASM-40 supports a wide range of serial


    and Ethernet interfaces including: V.24,
    V.35, X.21, V.36, RS-530, G.703-HDB3,
    G.703 Codirectional, Ethernet bridge,
    Ethernet bridge with VLAN support,
    Ethernet/Fast Ethernet bridge with VLAN
    support, and IP router.

    Innovative Access Solutions

    ASM-40
    High-speed Short-range Modem

    The modem supports different data rates


    that enable ASM-40 to be used as a rate
    converter:

    2048 kbps 32, 64, 128, 256, 512,


    1024, 2048 kbps

    1536 kbps 192, 384, 768,


    1536 kbps.

    LINE INTERFACE

    Attenuation
    Up to 40 dB

    Line Code
    User-selectable: HDB3, AMI, or B8ZS
    Framing
    Unframed

    Range
    1.75 km (1 mile) over 24 AWG wire
    Connector
    100 or 120 balanced:
    DB-15 or 5-clip terminal block
    75 unbalanced: BNC coax

    Transmit Level
    According to G.703

    ASM-40 has comprehensive diagnostics,


    including:

    Return Loss
    Better than 15 dB

    Line Type
    Unloaded 4-wire twisted pair, 19 to
    26 AWG
    BNC coaxial cable, 75

    Transmit and receive timing can be


    provided internally, or derived externally
    from the data terminal or receive signal.
    Internal FIFO buffers attenuate jitter or
    correct for phase differences either from
    the incoming analog signal (line side) or
    from the external clock (DTE side).

    Specifications

    Line Rate
    2048, 1920, 1544, 1536 kbps

    Local analog, remote digital, and local


    digital loopbacks in compliance with
    ITU V.54 requirements
    Built-in pattern generator and tester in
    compliance with ITU V.52
    requirements.

    Impedance
    100 for 1544 and 1536 kbps, balanced
    120 for 2048 and 1920 kbps, balanced
    75 for 2048 and 1920 kbps, unbalanced
    (BNC coax)

    ASM-40 is also available as a plug-in card,


    ASM-40/R, for RADs ASM-MN-214,
    19-inch card cage.

    Figure 1. Point-to-Point Interface and Rate Conversion

    Data Sheet

    DTE INTERFACE

    GENERAL

    Type and Connector


    V.24: 25-pin, D-type, female
    V.35: 34-pin, female
    X.21: 15-pin, D-type, female
    RS-530: 25-pin, D-type, female
    V.36: via adapter cable converting
    between RS-530 connector and
    37- pin, D-type, female connector
    G.703-HDB3: 15-pin D-type, female or
    BNC coax
    G.703 Codirectional: 5-clip terminal block
    or RJ-45

    Timing
    Internal, from internal oscillator
    External, from attached DTE
    Receive, from received signal

    Note: End-to-end byte synchronization is not


    maintained on the G.703 interface.

    IR-ETH (Ethernet bridge): RJ-45


    IR-ETH/QN (Ethernet/Fast Ethernet bridge
    with VLAN support): RJ-45
    IR-IP (IP router): RJ-45
    Data Rate
    32, 64, 128, 192, 256, 384, 512, 768,
    1024, 1536, 1544, 1920, 2048 kbps
    G.703-HDB3: 128, 256, 512, 1024,
    2048 kbps
    G.703 Codirectional: 64 kbps
    G.703/HDB3 Interface Characteristics
    Signal Attenuation: 6 dB
    Output Level: 3V

    Diagnostics
    ITU V.54 compliant loopbacks:
    Local analog
    Local digital
    Remote digital
    ITU V.52 compliant BER testing:
    Built-in pattern generator and tester
    Indicators
    PWR (green) On when power is on
    RTS (yellow) On when DTE activates
    Request To Send
    TD (yellow)
    On when steady SPACE is transmitted
    Blinks when data is transmitted
    RD (yellow)
    On when steady SPACE is received
    Blinks when data is received
    Not active when the RLB is active
    DCD (yellow)
    On when a valid received line signal is
    present
    TST (red)
    On when ASM-40 is in any loopback
    mode, or when PATT is pressed
    ERR (yellow)
    On or blinks if errors are present in the
    test pattern
    Lights momentarily when PATT
    pushbutton is pressed

    Figure 2. Tail-End Application for DDS Service

    Pushbuttons
    ANA Local analog loopback
    DIG Local digital loopback
    REM Remote digital loopback
    PATT Pattern generator
    Physical
    ASM-40:
    Height: 44.3 cm (1.7 in)
    Width: 21.4 cm (8.4 in)
    Depth: 25.8 cm (10.1 in)
    Weight: 0.88 kg (1.9 lb)
    ASM-40/R:
    Fits one slot in the ASM-MN-214 card cage
    Power
    Wide range: 100 to 240 VAC or
    48 VDC (40 to 72 VDC)
    +24 VDC (+18 to +36 VDC)
    Power Consumption
    AC: 15.6 VA
    DC: 5.4W
    Environment
    Temperature: 050C (32122F)
    Humidity: Up to 90%, non-condensing

    Data Sheet
    ASM-40
    High-speed Short-range Modem

    Power cord (for standalone units)

    ASM40-1/~/j/+
    Standalone version
    ASM40-1/R/j/+
    Card version for ASM-MN-214 card cage
    Note: When using V.35, X.21, V.36, or one of the
    Ethernet interface modules in the ASM-MN-214
    rack, a special interface adapter is required.

    Legend
    ~

    Power supply:
    AC
    100 to 240 VAC or -48 VDC
    24
    +24 VDC

    Line connector:
    TB
    balanced terminal block
    connector
    B
    balanced DB-15 connector
    UB
    unbalanced BNC coax
    connector

    DTE interface:
    V24
    V.24 interface
    V35
    V.35 interface
    X21
    X.21 interface
    530
    RS-530 interface
    703TB G.703 Codirectional
    interface, terminal block
    connector
    703RJ
    G.703 Codirectional
    interface, RJ-45 connector
    703
    G.703-HDB3 balanced
    interface
    703UB G.703-HDB3 unbalanced
    interface
    UTP
    IR-ETH module, RJ-45
    connector
    UTP/QN IR-ETH/QN module
    IP
    IR-IP module

    International Headquarters
    24 Raoul Wallenberg Street
    Tel Aviv 69719, Israel
    Tel. 972-3-6458181
    Fax 972-3-6498250, 6474436
    E-mail market@rad.com

    www.rad.com

    606-100-07/07 Specifications are subject to change without prior notice. 19892007 RAD Data Communications Ltd. All other trademarks are the property of their respective holders.

    SUPPLIED ACCESSORIES

    Ordering

    DC adapter plug (for DC-powered


    standalone units only)
    OPTIONAL ACCESSORIES
    CBL-530/449F
    Adapter cable for converting one DB-25
    connector into one DB-37 connector
    CIA/$
    Connector interface adapters for the
    ASM-MN-214 modem rack

    Legend
    $

    Connector interface adapter type:


    V35/1
    converts one DB-25 DTE
    connector into one
    34-pin connector
    X21/1
    converts one DB-25 DTE
    connector into one
    DB-15 connector
    ETHERNET
    converts one DB-25
    DTE connector into one
    RJ-45 connector
    TB-BNC/214 converts one terminal
    block line connector
    into two BNC coax
    connectors

    RM-28
    Special hardware for mounting one or two
    ASM-40 standalone units in a 19-inch rack

    North America Headquarters


    900 Corporate Drive
    Mahwah, NJ 07430, USA
    Tel. 201-5291100
    Toll free 1-800-4447234
    Fax 201-5295777
    E-mail market@radusa.com
    Innovative Access Solutions

    You might also like