Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 709 views

    Abstract - Pneumatic Auto Feed Sheet Cutting Machine

    Uploaded by

    JagathVishnu
    The document describes a pneumatic auto feed sheet cutting machine. It uses a pneumatic double acting cylinder connected to a moving cutting tool to cut sheet metal. Compressed air from a compressor powers solenoid valves and a control timing unit to automate the cutting. This makes the cutting process faster and more efficient than manual operation while keeping the machine portable and low cost.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Abstract - Pneumatic Auto Feed Sheet Cutting Machine

    Uploaded by

    JagathVishnu
    709 views4 pages
    The document describes a pneumatic auto feed sheet cutting machine. It uses a pneumatic double acting cylinder connected to a moving cutting tool to cut sheet metal. Compressed air from a compressor powers solenoid valves and a control timing unit to automate the cutting. This makes the cutting process faster and more efficient than manual operation while keeping the machine portable and low cost.

    Original Description:

    ABSTRACT - PNEUMATIC AUTO FEED SHEET CUTTING MACHIN

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a pneumatic auto feed sheet cutting machine. It uses a pneumatic double acting cylinder connected to a moving cutting tool to cut sheet metal. Compressed air from a compressor powers solenoid valves and a control timing unit to automate the cutting. This makes the cutting process faster and more efficient than manual operation while keeping the machine portable and low cost.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    709 views4 pages

    Abstract - Pneumatic Auto Feed Sheet Cutting Machine

    Uploaded by

    JagathVishnu
    The document describes a pneumatic auto feed sheet cutting machine. It uses a pneumatic double acting cylinder connected to a moving cutting tool to cut sheet metal. Compressed air from a compressor powers solenoid valves and a control timing unit to automate the cutting. This makes the cutting process faster and more efficient than manual operation while keeping the machine portable and low cost.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    FABRICATION OF PNEUMATIC AUTO FEED SHEET

    CUTTING MACHINE
    SYNOPSIS
    The sheet metal cutting process is a main part of the all industries. Normally the
    sheet metal cutting machine is manually hand operated one for medium and small scale
    industries. In our project is PNEUMATIC AUTO FEED SHEET CUTTING
    MACHINE.
    Automation in the modern world is inevitable. Any automatic machine aimed at
    the economical use of man, machine, and material worth the most. In our project is
    solenoid valve and control timing unit is used for automation.
    The sheet metal cutting machine works with the help of pneumatic double acting
    cylinder. The piston is connected to the moving cutting tool. It is used to cut the small
    size of sheet metal. The machine is portable in size, so easy transportable.

    INTRODUCTION

    This is an era of automation where it is broadly defined as replacement of manual


    effort by mechanical power in all degrees of automation. The operation remains an
    essential part of the system although with changing demands on physical input as the
    degree of mechanization is increased.
    Degrees of automation are of two types, viz.
    Full automation.
    Semi automation.

    In semi automation a combination of manual effort and mechanical power is required


    whereas in full automation human participation is very negligible.
    Need For Automation
    Automation can be achieved through computers, hydraulics, pneumatics, robotics,
    etc., of these sources, pneumatics form an attractive medium for low cost automation.
    The main advantages of all pneumatic systems are economy and simplicity. Automation
    plays an important role in mass production.
    Reduction of lab our and material cost
    Reduction of overall cost
    Increased production
    Increased storage capacity
    Increased safety
    Reduction in fatigue
    Improved personnel comfort

    WORKING PRINCIPLE
    The compressed air from the compressor is used as the force medium for this
    operation. There are pneumatic double acting cylinders, solenoid valve; flow control
    valve and timer unit used .The arm from the compressor enters to the floe control Valve.
    The controlled air from the flow control valve enters to the solenoid valve. The function
    of solenoid valves all of air correct time interval. The 5/2 solenoid valve is used. In one
    position air enter to the cylinder and pusses the piston, so that the cutting stroke is
    obtained.
    The next position air enters to the other side of cylinder and pusses the piston
    return back, so that the releasing stroke is obtained. The speed of the cutting and releasing
    stroke is varied by the timer control unit circuit.

    APPLICATIONS
    This machine is very useful for small scale industries
    This machine is used to cut the roller sheet metal
    All Industrial Application

    DISADVANTAGES
    While working, the compressed air produces noise therefore a silencer may
    be used.
    High torque can not be obtained
    Load carrying capacity of this unit is not very high.(<50 N)

    ADVANTAGES
    The pneumatic is more efficient in the technical field
    Quick response is achieved
    Simple in construction
    Easy to maintain and repair
    Cost of the unit is less when compared to other machine
    No fire hazard problem due to over loading
    Comparatively the operation cost is less
    The operation of cutting is faster because the medium used to operate is air
    Continuous operation is possible without stopping

    You might also like