Approval Sheet: D S C Electronics Co., LTD

APPROVAL SHEET
()
CUSTOMER
I T E M
NTC THERMISTOR
MODEL
DSC-8D-15MSFC(DC5)
APPLICATION
REMARK
type
D S C ELECTRONICS CO., LTD.

# 9-2, Suyoung- Ri, Bongdam-Eup, Hwasung- City, KOREA
TEL : (031) 296-7093
FAX : (031) 296-7096
SPECIFICATION FOR NTC THERMISTOR

IN-RUSH CURRENT LIMITER : 15 PIE
1. APPLICATIONS
1)
INRUSH CURRENT LIMITING IN PERIPHERAL COMMUNICATION EQUIPMENT,

MONITORS, PCs, SMPS.
2) SOFT-START MOTORS, e.g. IN VACUUM CLEANERS
3) CIRCUIT APPLICATIONS REQUIRING HIGH CONTINUOUS CURRENTS
4) USEABLE IN SERIES CONNECTION UP TO 250 Vrms
2. FEATURES
1)
2)
3)
4)
5)
6)
7)
HIGH RELIABILITY AND MINIMIZED AGE DRIFT, LOW-COST AND WIDE APPLICATIONS
BLACK SILICONE OR EPOXY COATED THERMISTOR DISK
STRAIGHT OR IN/OUT KINKED OR CUTTED LEADS OF TINNED, NICKEL PLATED
COPPER WIRE
USEABLE IN SERIES CONNECTIONS UP TO MAX. 260Vrms ( STEADY STATE 240Vrms )
AVAILABLE ON TAPE
RESISTANCE TOLERANCE 20% AVAILABLE UPON REQUEST
U.L. APPROVAL
3 DIMENSION
( UNIT : mm)
d : Lead wire diameter
D (MAX.)
16.5
16.5
16.5
T (MAX.)
7.5
7.5
7.5
W (MAX.)
L (MIN.)
51
25
25
d
WIRE FORM
0.8
F/C
0.8
F
0.8
S
4. ELECTRICAL CHARACTERISTICS
1)
2)
3)
4)
5)
6)
ZERO POWER RESISTANCE AT 25 (Ohms) :

MAX STEADY STATE CURRENT (Amps)
:
THERMAL DISSIPATION CONSTANT (/) : REFERENCE No. 5
THERMAL TIME CONSTANT (sec)
:
OPERATING TEMPERATURE ()
:
B VALUE ( 25/85)
:
SPECIFICATION FOR NTC THERMISTOR

5. SPECIFICATIONS OF SIMILAR SIZE
TYPE No.
NORMAL
RESISTANCE MAX. STEADY
AT 25
STATE CURRENT
(ohms/)
(amps/A)
THERMAL
DISSIPATION
CONSTANT
(mW/)
THERMAL
TIME
CONSTANT
(sec)
NORMAL
B
CONSTANT
(25/85,K)
DSC - 1D 15
1.0
7.5
22
62
28505%
DSC - 2.5D 15
2.5
7.0
21
63
2900
DSC - 3D 15
3.0
6.7
21
70
2900
DSC - 5D 15
5.0
6.0
20
75
3000
DSC - 7D 15
7.0
6.0
20
76
3000
DSC - 8D 15
8.0
5.5
20
78
3100
DSC - 10D 15
10.0
5.0
19
80
3150
DSC - 12D 15
12.0
4.8
18
82
3150
DSC - 15D 15
15.0
4.5
17
86
3180
DSC - 16D 15
16.0
4.0
17
87
3200
DSC - 20D 15
20.0
3.0
15
90
3250
DSC - 25D 15
25.0
2.8
15
90
3250
2.5
16
95
3300
30.0
DSC - 30D 15
Resistance tolerance : 10, 15, 20%
6. MATERIAL LIST
HAZARDOUS
MATERIAL
DESCRIPTION
Mn3O4
POWDER99.9%
Co3O4
POWDER99.9%
NiO
POWDER99.9%
CuO
POWDER99.9%
Hg
Ag PASTE
CON COAT.
Cr+6
Lead wire
Cu / Sn
0.8 pie
0.17
PBBs
Solder
SnAg
96.5 / 3.5
0.45
PBDs
Coating
SILICONE
COAT.
OHMCOAT AF490
0.40
ITEM
Element
WEIGHT(g)
SUBSTANCE
CONTAIN (PPM)
Pb
1.53
Cd
D S C
7.TERMINOLGY AND GENERAL SPECIFICATIONS
TECHNICAL TERMS
OPERATING TEMP.
DESCRIPTIONS
OPERATING TEMPERATURE RANGE
SPEC.
-40 TO 180
WITHOUT DERATING
STORAGE TEMP
STORAGE TEMPERATURE RANGE
-30 TO 80
WITHOUT CURRENT APPLIED.

ZERO POWER
THE ZERO POWER RESISTANCE IS
RESISTANCE
THE RESISTANCE OF A THERMISTOR
SEE RATING
TABLE
AT 25 AMBIENT TEMPERATURE.
B VALUE
B VALUE CAN BE DERIVED BY

MEASURING THE RESISTANCE AT
SEE RATING
TABLE
25 (R1) AND85 (R2) AND

CALCULATING BY FOLLOWING
FORMULA.
Ln(R2/R1)
B=
1/(273.15+T2)-1/(273.15+T1)
MAX. STEADY
STATE CURRENT
THE MAX STEADY STATE CURRENT IS

THE MAXIMUM ALLOWABLE CURRENT
SEE RATING
TABLE
AT LOADING TO MAX OPERATING

TEMPERATURE IN 25 AMBIENT.
THERMAL
THE DISSIPATION CONSTANT MEANS
DISSIPATION
THE AMOUNT OF POWER REQUIRED
CONSTANT
TO RAISE THE APPLIED TEMPERA-
SEE RATING
TABLE
TURE TO THE THERMISTOR IN

STATIONARY STATE FOR 1.
THERMAL TIME
CONSTANT
THE TIME CONSTANT IS DEFINED AS

RELATIONSHIP BETWEEN THE THERMAL
CAPACITY AND DISSIPATION CONSTANT.
IT IS MEASURED AS TIME IN SECONDS
WITCH IS NEEDED FOR THERMISTOR
TEMPERATURE CHANGE DF 63.2%
DIFFERENCE BETWEEN INITIAL AND
FINAL THERMISTOR TEMPERATURE.
- 3 -
SEE RATING
TABLE
D S C
TECHNICAL TERMS
LOAD LIFE
DESCRIPTIONS
THERMISTOR SHALL BE STORED FOR
1,000 12HOURS AT 25 2 WITH
THE MAXIMUM RATED APPLICABLE
SPEC.
MAXIMUM
RESISTANCE
CHANGE :
STEADY STATE CURRENT APPLIED.
15% OF
AFTER THE STORAGE PERIOD.
INITIAL
TO AND STABILIZED AT ROOM TEMP.

MAXIMUM
RESISTANCE
THERMISTOR SHALL BE SUBJECTED TO
THE FOLLOWING 10 CYCLES :
TEMPERATURE
CYCLE
CHANGE :
15% OF
AT -403 FOR 30 MINUTES AND
INITIAL, AND
AT +1502 FOR 30 MINUTES.
THERE SHALL
AFTER THE CYCLES. THE THERMISTOR
BE NO
SHALL BE RETURNED TO AND STABILIZED
EVIDENCE
AT ROOM AMBIENT TEMP.
OF HARMFUL
CORROSION,
MECHANICAL
MOISTURE
RESISTANCE
THERMISTOR SHALL BE STORED FOR
MAXIMUM
1,000 12 HOURS AT 402, 90-95% RH
RESISTANCE
WITH NO CURRENT APPLIED. AFTER THE
CHANGE :
STORAGE PERIOD THE THERMISTOR
15% OF
SHALL BE RETURNED TO AND STABILIZED
INITIAL.
AT ROOM TEMP.
LEAD FULL
STRENGTH
AFTER GRADUALLY APPLYING THE 1Kg

LOAD AND KEEPING THE UNIT FIXED
NO
FOR 10 SECONDS IN THE AXIAL
OUTSTANDING
DIRECTION.
DAMAGE.
THE LEAD SHALL BE VISUALLY EXAMINED

FOR ANY DAMAGE
SOLDERING HEAT
RESISTANCE
THE LEAD WIRE OF THE THERMISTOR
MAXIMUM
SHALL BE DIPPED WITH 41mm SPACE
RESISTANCE
OF 300 5 FOR 3 SEC, RETURNED
CHANGE :
TO AND STABILIZED AT ROOM TEMP.
15% OF
INITIAL.
-4-
D S C
TECHNICAL TERMS
SOLDERABILITY
DESCRIPTIONS
SPEC.
WHEN THE LEAD WIRE OF THERMISTOR

WAS DIPPED INTO SOLDER (Sn96.5Ag3.5)
BATH of 330 5 FOR 3 SECONDS
AFTER IMMERSION IN 25%RESIN FLUX.
THE SOLDERABILITY RATIO OF LEAD
WIRE SURFACE SHOULD BE MORE THAN
95%
MORE THAN
95%
SOLDERABILITY
SURGE CURRENT
LIFE
THERMISTOR SHALL BE SUBJECTED

THE FOLLOWING 2,000 CYCLES.
- SURGE CURRENT : MAX STEADY STATE
CURRENT.
-NTERVAL : 15 SECONDS
AFTER THE CYCLES, THE THERMISTOR
SHALL BE RETURNED TO.
MAXIMUM
RESISTANCE
CHANGE :
15%
INSULATION
RESISTANCE
THE THERMISTOR SHOULD BE NO

CHANGED.
AFTER APPLIED THE VOLTAGE OF
1,500 Vac FOR ONE MINUTE BETWEEN
THE LEAD WIRE AND THE INSULATION
COATED PORTION.
WITHIN 15%
RESISTANCE
CHANGE AND
NO DAMAGE.
INSULATION
RESISTANCE
THE INSULATION RESISTANCE SHOULD

BE OVER 500M OHMS WITH 1,000Vdc
BETWEEN THE LEAD WIRE AND THE
INSULATION COATED PORTION.
WITHIN 15%
RESISTANCE
CHANGE AND
NO DAMAGE.
MODEL
NUMBERING
DSC
D -
PACKAGE
WIRE FORM
COATING MAT'LS
TOLERANCE
DIAMETER OF ELEMENT
TYPE OF DISC
ZERO POWER RESISTANCE
SYMBOL OF DSC's NTC
* TOLERANCE K : 10%
L : 15%
M : 20%
* PACKAGE
* COATING MAT'L/WIRE FORM

E/S : EPOXY/STRAIGHT
S/S : SILICONE/STRAIGHT
S/F : SILICONE/FORMING
T : TAPING
B : BULK
C : CUTTING
-5-
3100`K
Pb
FREE
Pb
FREE
Pb
FREE

Approval Sheet: D S C Electronics Co., LTD

Uploaded by

Copyright:

Available Formats

Approval Sheet: D S C Electronics Co., LTD

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Approval Sheet: D S C Electronics Co., LTD

Uploaded by

Copyright:

Available Formats

APPROVAL SHEET

D S C ELECTRONICS CO., LTD.

SPECIFICATION FOR NTC THERMISTOR

INRUSH CURRENT LIMITING IN PERIPHERAL COMMUNICATION EQUIPMENT,

d : Lead wire diameter

ZERO POWER RESISTANCE AT 25 (Ohms) :

SPECIFICATION FOR NTC THERMISTOR

STORAGE TEMPERATURE RANGE

WITHOUT CURRENT APPLIED.

THE ZERO POWER RESISTANCE IS

THE RESISTANCE OF A THERMISTOR

B VALUE CAN BE DERIVED BY

25 (R1) AND85 (R2) AND

THE MAX STEADY STATE CURRENT IS

AT LOADING TO MAX OPERATING

THE DISSIPATION CONSTANT MEANS

THE AMOUNT OF POWER REQUIRED

TO RAISE THE APPLIED TEMPERA-

TURE TO THE THERMISTOR IN

THE TIME CONSTANT IS DEFINED AS

STEADY STATE CURRENT APPLIED.

AFTER THE STORAGE PERIOD.

TO AND STABILIZED AT ROOM TEMP.

AT -403 FOR 30 MINUTES AND

AT +1502 FOR 30 MINUTES.

AFTER THE CYCLES. THE THERMISTOR

SHALL BE RETURNED TO AND STABILIZED

AT ROOM AMBIENT TEMP.

THERMISTOR SHALL BE STORED FOR

1,000 12 HOURS AT 402, 90-95% RH

WITH NO CURRENT APPLIED. AFTER THE

STORAGE PERIOD THE THERMISTOR

SHALL BE RETURNED TO AND STABILIZED

AFTER GRADUALLY APPLYING THE 1Kg

FOR 10 SECONDS IN THE AXIAL

THE LEAD SHALL BE VISUALLY EXAMINED

THE LEAD WIRE OF THE THERMISTOR

SHALL BE DIPPED WITH 41mm SPACE

OF 300 5 FOR 3 SEC, RETURNED

TO AND STABILIZED AT ROOM TEMP.

WHEN THE LEAD WIRE OF THERMISTOR

THERMISTOR SHALL BE SUBJECTED

THE THERMISTOR SHOULD BE NO

THE INSULATION RESISTANCE SHOULD

* COATING MAT'L/WIRE FORM

You might also like