Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
127 views

Steel I-Beam & Wood Lagging Shoring System: Project Name

This document provides calculations for the design of a steel I-beam and wood lagging shoring system. Key parameters and assumptions are given, including soil properties, surcharge loads, and beam dimensions. Earth pressures and bending moments are calculated. The resisting moment is determined and compared to the overturning moment, giving a factor of safety of 1.5. Beam properties including section modulus are provided, confirming the design is adequate.

Uploaded by

Jason Roy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
127 views

Steel I-Beam & Wood Lagging Shoring System: Project Name

This document provides calculations for the design of a steel I-beam and wood lagging shoring system. Key parameters and assumptions are given, including soil properties, surcharge loads, and beam dimensions. Earth pressures and bending moments are calculated. The resisting moment is determined and compared to the overturning moment, giving a factor of safety of 1.5. Beam properties including section modulus are provided, confirming the design is adequate.

Uploaded by

Jason Roy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

STEEL I-BEAM &

PROJECT NAME:
CHECKED BY:
DATE:
Assumptions/Given Data
Angle of Repose of Dry Sand, 1:

30

so Ka is =

0.33

and Kp is =
Angle of Repose of Dry Sand, 2:

3
41 0

so Ka is =

0.21

and Kp is =

4.81

Unit weight of Soil/Sand; 1 KN/m3


Unit weight of Soil/Sand; 2 KN/m

surcharge load;W Kn/m

Dewatering in case of GWT


Assumed Size of I Beam:
Plastic Modulus of I-Beam

18
20
18
0
356x406x467
10002

Height Above Dredge Line; h1 (m)

2.9

Height Below Dredge Line; h2 (m)


Total Height; H (m)

5.1
8

WIDTH OF I-BEAM
SPACING OF I-BEAMS

0.3
2

TEEL I-BEAM & WOOD LAGGING SHORING SYSTEM

CALCULATIONS:
2

Earth Pressure on Steel-I-Beam & Wood Logging; ( P1 = kax1xh1 /2) with 1 (KN)

25.2 KN

Earth Pressure on Steel-I-Beam & Wood Logging; (P2 = kax1xh12/2) with 2 (KN)

15.7 KN

Earth Pressure on Steel-I-Beam & Wood Logging; (P = ((P1+P2)/2)). (KN)

20.5 KN

BM due to Retained Soil; ( = PxH/3 = ka x1x(h12/2((h1/3+h2))) (Knm/m)

124.2 KNm/m

BM due to Surcharge; with 1 ( =KaxWxh1((h1/2)+h2))) (Knm/m)

114 KNm/m

BM due to Surcharge; with 2 ( =KaxWxh1((h1/2)+h2))) (Knm/m)

71 KNm/m

BM due to Surcharge; AVERAGE. (Knm/m)

92.5 KNm/m

Over Turning moment MO above dredge Line: (Knm)


Over Turning moment MO Below dredge Line: ( =kax2xh23xWidth of Pile/6) (Knm)

433.4 Knm

TOTAL OVERTURNING MOMENT: (Knm)

463.8 Knm

Resisting Moment Due to Retained Soil MR: ( =kpx2xh23xWidth of pile/6)

638.7 Knm

Moment Due to Surcharge: ( =kpx2xh2xWidth of pile/2)


TOTAL RESISTING MOMENT
TOTAL RESISTING MOMENT/TOTAL OVERTURNING MOMENT OR FOS

30.4 Knm

73.7 Knm
712.4 Knm
1.5

Design of Steel I-BEAM


Bending Moment
Section Modulus (Grade 345)
OK or Not OK

433.4 Knm
3
1256.2319 cm
OK

Thickness of

Designation

356x406x467

Mass
Per
Meter
M

467

Depth of Width of
Section b Section b
mm
mm

436.6

412.2

Web

Root

Depth

Second Moment

Radius

Elastic

Radius

between

of Area

of Gyration

Modulus

fillets

Axis x-x Axis y-y

Flange

Axis x-x

Axis y-y

Axis x-x

s
mm

t
mm

Ix

Iy

rx

ry

Zx

mm

mm

cm4

cm4

cm

cm

cm3

35.8

58

15.2

290.2

183003

67834

17.5

10.7

8383

Elastic

Plastic

Buckling

Modulus

Modulus

Parameter

Axis y-y

Axis x-x

Axis y-y

Zy

Sx

Sy

cm

3291

cm

10002

cm

Torsional Warping
Index

5034

Constant

H
dm

0.839

6.86

24.3

Torsional

Area

Constant

of

Inertia

Section

cm

5808

cm2
595

You might also like