Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

MMI 3G Region Conversion

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MMI 3G Region Conversion

Version 1.2 Q1 2014 (by KG)

Step Instructions
1.
Switch on the MMI 3G.
2.
Enter the green menu (First press Setup and then CAR and hold both buttons down
simultaneously for approx. five seconds until the display changes.)

3.

Green menu comes up

4.

Go to System Internal and change to ROW

5.

Go to SWDL and tick Ignore region and variant

6.
7.
8.

Quit the green menu by pressing Navigation button.


Insert the firmware update I have sent you into the MMI unit slot SD1.
First press Setup and then Return and hold both buttons down simultaneously for approx.
five seconds until the display changes.

9.
10.
11.
12.
13.
14.

Note: You can quit the software download process at any time by simultaneously pressing
and holding the Tone and Back buttons for more than five seconds.
Press Update
Choose SD 1
Wait until reading is done.
Choose HNav_EU_K265_D3
Choose Standard
Scroll down to the bottom of the list

NOTE: Ensure that there is no voltage changes of the vehicle's battery, i.e. don't Switch off and on
anything, Don't open and close doors or windows etc... Diagnostic tests using the VCDS/other
operations may not be performed in parallel. Switch off all unnecessary electrical equipment
(auto/daytime running lights, air-conditioning etc.) in the vehicle and leave it switched off
throughout the update.
15.
16.

17.

Press Start download and then Start


Please wait... Once the system has rebooted, the download application may show a screen
that displays the update progress of various devices. As soon as all devices have registered
with the upgrade application, the update process is activated and the progress is shown on
screen. The system may reboot many times during the update and programming session. This
is carried out completely automatically and does not require you to take any action. Once the
system has rebooted, updating is continued and the "Download progress" screen is displayed
many times.
Device Summary screen is displayed in the subsequent overview screen.

18.
19.
20.

Scroll down and select "Continue".


Select Aboard Documentation.
Once MMI is rebooted for the final time, youre now ready for your Map Update.

You might also like