Update Instructions For MMI 3GP v1.5
Update Instructions For MMI 3GP v1.5
Update Instructions For MMI 3GP v1.5
22
26
28
32
THANKS ______________________________________________________________ 34
BEFORE START
Caution: Use this guide at your own risk, we are not responsible
Important: Connect your car with a battery charger or leave the engine running
Important: Some users report problems when copying files from Mac OS / Linux,
Its better if you use Windows for all file copy process. You can use a virtual
machine for that.
We recommend: Read the complete guide before the start, recheck all the steps
and do it carefully.
THIS MEANS A PHYSICAL BUTTON > A button that you can touch with your hands
THIS IS A GREEN MENU ITEM > It indicates the path in the hidden menu
Firmware files
Map files
Activation script
A quality SD, Class 10 for faster (and safer) file operations.
(Optional) VagCom cable or similar
UPDATING FIRMWARE
Format your SD in FAT32.
Copy the root of your firmware in the SD (like picture below)
Open Engineering Menu pressing the CAR button and immediately after that the BACK
button
Hold both buttons pressed for a few seconds
Scroll down with the big knob and select the source in the menu (SD 1) pressing it.
Select Standard
Caution: Some users report problems with Bose sound system, if you have Bose
and dont know how to recode it we recommend that you unselect it from list
(using User-Defined Mode) before update.
You will see a list with all categories that firmware will update
Scroll to bottom and press Start Update
After several minutes/hours (it depends that what it has to update and the speed of your
SD) the firmware update will be done
Select the Abort documentation and the MMI will reboot
Avoid the not removable Fault Code 03175 - Invalid Data Set error
Avoid errors while copying the map (out of size, slow write speed)
There are no files of the old map into the new map
Open Green Menu (Press CAR and MENU and hold it)
Go to nav/databaseupdate
Select Delete database (will need reboot) and click it.
Open Green Menu again (Press CAR and MENU and hold it)
Go to nav/databaseupdate
Select Delete Nav HDD partition and click it.
Open Engineering Menu pressing the CAR button and immediately after that the BACK
button.
Hold both buttons pressed for roughly some seconds.
10
11
Scroll down with the big knob and select the source in the menu (SD 1) pressing it.
12
Select Standard
You will see a list with all categories that map will update
Scroll to bottom and press Start Update
13
After several minutes (even hours it depends that the speed of your SD) the map
update will be done, just select the Documentation Cancel/Abort Information and the
MMI will reboot.
14
Caution: If you already have an activator installed (like Carsons Patch) DONT
apply another activator. Youll need to clean your firmware before doing an
emergency update or just inject the FSC using FSC injector. Multiple activators
will lead to a bricked (dead) MMI unit
Make sure that MMI is fully booted (press all buttons once RADIO CAR NAV MEDIA TEL).
Wait until all options are ok (no options in gray) even when all options are ok wait a
minute more.
Is the moment for insert the SD in slot 1.
Dont touch anything
After a few seconds a screen will pop up, press any key (we suggest the big knob) once
15
Dont touch anything again (the script are copying files and doing stuff)
After some seconds/minutes the script will finish and another screen will appear.
16
17
MISC
ENABLE GREEN MENU (HIDDEN MENU)
Green Menu is used for several operations. For activate it you can do it with a VagCom
cable (VCDS) or using a script.
Select module 5F
18
Click on Adaption 10
Note that only Save may be available in which case you would ignore the Test button
Press Done, Go Back, close the controller and quit the software
Theres no need to restart the MMI, just press CAR + SETUP for 6 seconds to enter the
hidden menu
19
Make sure that MMI is fully booted (press all buttons once RADIO CAR NAV MEDIA TEL).
Wait until all options are ok (no options in gray) even when all options are ok wait a
minute more.
Is the moment for insert the SD in slot 1.
Dont touch anything
After a few seconds a screen will pop up, press any key (we suggest the big knob) once
20
Dont touch anything again (the script are copying files and doing stuff)
After some seconds/minutes the script will finish and another screen will appear.
21
Important: This step are only required if you need to change the region of your
car (USA->Europe e.g.)
Go to swdl and tick ignore region and variant
22
Insert your new firmware update into the MMI unit slot SD1
Go to system and press emergency update, and then click Yes
23
MMI will now reboot and enter into Emergency Update mode.
24
Once the above step is completed the programming screen will appear
Important: No input is necessary from you, the update tool will perform
everything automatically.
Some users reported that EmergencyUpdate only install a few (basic) functions on your
MMI, while other functions (like Google Maps) are not installed.
Once the MMI emergency update is completed, you will need to re-install your firmware
as normal using the procedure showed in this manual for install all secondary functions.
25
Go back (click in )
Go to car/carmenuoperation
Scroll down to VIN and set VIN value to 0
26
27
Select module 5F
Click on Adaption 10
28
YourCountNumber ^ 51666
Or
YourCountNumber XOR 51666
You can also use the calculator in
http://www.audienthusiasts.com/Application_SVMError.html
Now enter the result into the New Value field and click Test and Save
Note that only Save may be available in which case you would ignore the Test button
Exit Adaptations and return to the main screen (Click Done, Go Back)
Click Fault Codes 02
30
If you see any Faults click Clear Codes 05 then Done, Go Back
Now check Fault Codes one more time and the SVM error should be gone. If not, repeat
the steps again.
In the event you go to Channel 15 and there is no Count value, clear your errors and then
go back recheck. Sometimes the count will not be present until the error is cleared. Of
course the error will return until you complete all the above steps again.
31
Don't reboot, just exit with any button (I usually use RADIO)
Proceed with firmware-upgrade as normal.
When the update starts, you can select User Defined instead of Standard
32
33
THANKS
This manual was originally created by Carpediem and updated/extended by darkdll
Thanks to all the people involved in the Audi scene
Thanks to Carson for his super patch.
Thanks to people that share their maps and FSCs
Especial thanks to Iridium, Walawa75, AudiEnthusiasts, Cartechnology forum
And thank you for read this :)
34