Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
282 views

Obtain The Cascade and Parallel Form Realizations For The Following Systems) Y (N) - 0.1 (n-1) + 0.2 y (n-2) + 3x (N) +3.6 X (n-1) +0.6 X (n-2)

The document contains 6 questions related to digital signal processing concepts like DFT, FFT, filtering, convolution and filter design. Specifically, it asks to: 1) Compute the 4-point DFT of a sequence and state properties of DFT. 2) Compute an 8-point FFT using radix-2 algorithms. 3) Find the output of a linear filtering operation using overlap-add and overlap-save methods. 4) Derive and draw the radix-2 DIT and DIF algorithms for an 8-point FFT.

Uploaded by

Annalakshmi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
282 views

Obtain The Cascade and Parallel Form Realizations For The Following Systems) Y (N) - 0.1 (n-1) + 0.2 y (n-2) + 3x (N) +3.6 X (n-1) +0.6 X (n-2)

The document contains 6 questions related to digital signal processing concepts like DFT, FFT, filtering, convolution and filter design. Specifically, it asks to: 1) Compute the 4-point DFT of a sequence and state properties of DFT. 2) Compute an 8-point FFT using radix-2 algorithms. 3) Find the output of a linear filtering operation using overlap-add and overlap-save methods. 4) Derive and draw the radix-2 DIT and DIF algorithms for an 8-point FFT.

Uploaded by

Annalakshmi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1.

(a) Compute 4- point DFT of a causal three sample sequence is given by,
x(n) = 1/3, 0 < n<2
= 0, else
(a) State and prove shifting property,circular convolution & parsevals theorem of DFT.
2. Compute the DFT for the sequence {1, 2, 0, 0, 0, 2, 1, 1} using radix -2 DIF FFT and radix -2
DIT- FFT algorithm.
3. Find the output y(n) of a filter whose impulse response is h(n) = {1, 1, 1} and input signal x(n)
= {3, -1, 0, 1, 3, 2, 0, 1, 2, 1} using Overlap add and Overlap save method.
4.Derive and draw the radix -2 DIT and DIF algorithm for FFT of 8 points.
5. Determine IDFT of the following
(a)X(k)={1,1-j2,-1,1+j2}
(b)X(k)={1,0,1,0}
(c)X(k)={1,-2-j,0,-2+j}
6. Determine the circular convolution of the two sequences x1(n)={1, 2, 3, 4} x2(n)={1, 1, 1, 1}
and prove that it is equal to the linear convolution of the same.

1.With a neat sketch explain the design of IIR filter using impulse invariant transformation and
bilinear transformation
2. For a given specifications of the desired low pass filter given below,
0.707 |H()| 1.0,
0 0.2
|H()| 0.08,
0.4
design a Butterworth filter using bilinear transformation.
3. The normalized transfer function of an analog filter is given by,
Ha(sn)= 1/ sn + 1.41sn +1 with a cutoff frequency of 0.4 , using bilinear transformation.
2

4. Convert the analog filter in to a digital filter whose system function is


s + 0.2
H(s)= ---------------- .
(s + 0.2) + 16
Use Impulse Invariant Transformation and bilinear transformation .Assume T=1sec
2

5. Obtain the cascade and parallel form realizations for the following systems)
Y (n) = -0.1(n-1) + 0.2 y (n-2) + 3x (n) +3.6 x (n-1) +0.6 x (n-2)

6. Design a Chebyshev digital low pass filter with the following specifications.
pass band ripple 1 dB, pass band edge = 4Khz,stop band attenuation 40 dB,
stop band edge = 6Khz & sampling rate = 24Khz. Use bilinear transformation.

1.Determine the coefficients of a linear phase FIR filter of length N=15 which
has a symmetric unit sample response and a frequency response that
satisfies the conditions
H(2k/15) = 1 ; for k = 0,1,2,3
0.4 ; for k = 4
0; for k = 5,6,7
2. Design the ideal low pass filter using Hamming window with a cut off frequency of 1.2
radians/sec and N=11.
3. Prove that an FIR filter has linear phase if the unit sample response satisfies the condition h(n)
= h(M-1-n), n =0,1,.. M-1.Also discuss symmetric and anti symmetric cases of FIR filter
4.Design an FIR linear phase digital filter approximating the ideal frequency response,
Hd () = 1, 0 <= || <= /6
0, /6<|| <=
5. The transfer function for an FIR filter is given by H(z)=1-1.334335z-1 + 0.9025z-1 Draw the
realization diagram for each of the following cases. (i) Transversal structures (ii) a two-stage
lattice structure. Calculate the values of the coefficients for the lattice structure.

You might also like