Catalogue: Automatic Control Valves

C ATA L O G U E
2 0 0 1
AUTOMATIC CONTROL VALVES
INTRODUCTION
DOROT AUTOMATIC CONTROL VALVES is pleased to present the latest edition of their catalogue.
This new catalogue includes new models as well as modifications of previous products.
The updated information in this edition invalidates the data of the previous edition. This catalogue does not replace
other technical publications such as the design manual which is available from DOROT. We are confident that you
will be able to use this catalogue as a convenient guide for choosing among the wide range of DOROT products.
The aims of the catalogue are:

1
To enable the user to easliy select the valve model which best suits his/her requirements, being fully aware of
the hydraulic conditions of his/her network and the required performance of the control valves.
To create a "common language" between the customer and the factory in order to avoid confusion caused by
the wide range of products, structural versions, control modes, materials etc.
The catalogue is divided into sections, each one dedicated to a group of products. The information included in each
section is the essential data required for designs and valve selections, made by consulting engineers, dealers, and
users of water control networks.
Sections A,B,C,D and E include:

1
2
3
A general description of the specific group of valves, with pictures of the various models.
The hydraulic characteristics of the valves in each section.
A model selection table, listing all the standard models and sizes available in the group.
Note that although production in DOROT is according to the metric system, the valve size code is in imperial
(inches) dimensions and the relevant metric dimensions are also included.
A schematic diagram featuring all the various components of the valve (including optional units). All the components
are numbered, to facilitate the ordering of spare parts, or the valve's conversion into an optional version.
An "ordering guide" which explains how to specify the chosen model.
The control functions are listed in section F. Basic explanations of each function, a list of valve models which
may perform the specified function, and the pilot valve used, are found in this section.
Please note that the standard features of each model will be supplied with the product, unless specified
otherwise in the confirmed order.
The pilot valves and accessories are listed in section G. Information on the operating conditions and spare
parts is found in this section.
2 0 0 1
The "General Data", (section H) at the end of the catalogue, supplies details regarding conditions that are not
standard, to assist the user.
II
BASIC
METAL VALVES
DESCRIPTION
MODELS 44, 45, 94
MODELS 47, 67, 77, 87
The direct-sealing diaphragm Valves are operated by pipeline pressure

or by air pressure: (which is equal to the pipeline pressure).
The reinforced rubber diaphragm seals the water passage when the
line pressure reaches the valve's control chamber. Relieving the
pressure from the control chamber causes the valve to open.
The valve's only moving part is its diaphragm: no shaft, seals, or
bearings are located within the water passage.
A spring above the diaphragm ensures "valve closure" regardless of
pressure level or flow conditions.
DOWNSTREAM
UPSTREAM
CLOSED VALVE
DOWNSTREAM
MODEL 82
MODEL 53
UPSTREAM
OPENED VALVE
ADVANTAGES
MODEL 91
MODEL 84
MODEL 77-16"
MODEL 77-20"
2 0 0 1
Structural simplicity
Superb hydraulic performance
Reliable control of abrasive liquids and slurries
Cost-efficient control and regulation for a wide range of flow rates
Minimum maintenance-maximum dependability
BASIC
METAL VALVES
SIZE & DIAPHRAGM SELECTION GUIDE

This graph provides a guide (based on flow rate and line pressure factors) for selecting the proper valve,
pressure rating, size, and diaphragm type.
Line Pressure
psi mwc
SIZE (INCHES)
360 250
HIGH PRESSURE
MODELS
230 160
#69
SIZE (INCHES)
10
16
20
24
#70
#71
#72
#73
#78
#78
#78
#78
868 8
10
12 / 14
20
24
#32
#35
#35 #36
#40
#36
11 2
21 2 323 3
#18
#13
#3
#3
#3 #32
#2
#2
#18
140 100
70
#85
#85
#2
50
#12
#82
#5
16
#9
#5
#91
#12
#50
#37
#37
#92
#92
#92
Example A
#35
#3
30
#3
20
#18
20
#3
#13
#18
#35 #36
#2 #2
10
10
#40
#32
#32
LOW PRESSURE
SPECIAL
DIAPHRAGMS
#2
#85
#78
#82
#85
#5
#5
#12
#12
#9
#37
#37
Example B
#50
#91
#91
#36
#35
#92
#92
#92
2
1
2
6
8 10
6
2
8 10
3
2
6
8 100
6
2
8 100
3
2
6
8 1000
6
2
8 1000
3
2000
4000 m /h
8 10000
20000 gpm
L O C AT E T H E F L O W R AT E O N T H E H O R I Z O N TA L A X I S A N D D R AW A L I N E U P WA R D S .
L O C AT E T H E L I N E P R E S S U R E O N T H E V E R T I C A L A X I S A N D D R AW A L I N E T O T H E R I G H T.
The point of intersection of the two lines (see examples A+B) defines the size of the valve (horizontal white section on top). A suitable diaphragm is represented by
the BLUE area (standard diaphragm). GREEN and GREY areas represent special low-pressure diaphragms.
Serial numbers of the respective diaphragms are marked in squares on the upper and lower limit lines of each size area.
EXAMPLE A
F L O W R A T E 2 0 0 m3 / h ( 9 0 0 g p m ) , L I N E P R E S S U R E 3 0 m ( 4 5 p s i ) : 6 " V A L V E , S T A N D A R D D I A P H R A G M .
EXAMPLE B
2 0 0 1
F L O W R A T E 5 0 m3 / h ( 2 2 0 g p m ) , L I N E P R E S S U R E 5 m ( 8 p s i ) : 3 " V A L V E , S P E C I A L D I A P H R A G M N O . 5 .
MODEL SELECTION TABLE

44
45
47
53
*67
77
82
84
87
91
*94
CONNECTION
THREADED
THREADED
FLANGED
VICTAULIC
FLANGED
FLANGED
FLANGED
THREADED
FLANGED
THREADED
THREADED
MATERIAL
CAST IRON
BRONZE
CAST IRON
CAST IRON
CAST IRON
CAST IRON
BRONZE
BRONZE
DUCTILE IRON
MODEL
PATTERN
DUCTILE IRON DUCTILE IRON
Inch mm
AVA I L A B L E
SIZES
20
1
25
1 1 4 32
1 1 2 40
2
50
2 1 2 65
323 80
3
80
4 100
6 150
868 200
8 200
10 250
12 300
14 350
16 400
20 500
24 600
* HIGH PRESSURE MODELS (PN 25)

24"
20" /
16"
12" /
10"
8"
6"
868"
4"
1 12 "
1 14"
3"
2"
3"2"3
"
"
",1
3
4
psi mwc
14"
HEADLOSS CHART
6
8
7
6
5
3
4
6
2
7 8 9 10
3
2
5
7 8 9
3
100
5
2
7 8 9 100
3
2
5
7 8 9 1000
5
2
7 8 9 1000
3
2
5
8 9 10000
m /h
gpm
2 0 0 1
BASIC
METAL VALVES
PRESSURE RATING
FLOW FACTOR
MODELS
44,45,47, 53, 77
82, 84, 87, 91
SIZE
mm Inch
Kv
Cv
3
4
17
20
40
50
32
Cv
SIZE
Cv
20
200 L.F. 868
670
780
17
20
200
800
31
36
250
10
64
75
300
95
110
100
117
80 L.F. 323
Kv
MODELS
44,45,47, 53, 77
82, 84, 87, 91
mm Inch Kv
25
MODELS
67, 94
78
91
The pressure rating of the "gal" valves is determined by

the body strength and the diaphragm type.
MODELS
67, 94
Kv
Cv
930
800
930
1250
1460
1300
1520
12
1900
2220
350
14
1900
2220
400
16
2600
3030
2600
3030
80
170
200
120
140
500
20
4600
5370
4600
5370
100
220
260
200
230
600
24
4600
5370
4600
5370
150
600
700
550
640
Models: 44, 45, 47, 53, 77, 82, 84, 87, 91 are rated PN16 (maximal operating
pressure of 160 mwc, 230 psi).
Models: 67, 94 are reted PN25 (maximal operating pressure of 250 mwc, 360 psi).
In case a low-pressure diaphragm (see graph, page 2 in this catalogue) is
assembled in the valve, and the specific diaphragm should not be used at the
standard pressure limits, the valve will be rated and its tag marked according
to the diaphragm operating pressure limitation.
Valve Connection Standard is marked on the tag. The user should consider
the pressure rating of the specified standard while designing and operating
the valve.
SPECIFICATIONS
MATERIALS
BODY AND BONNET
DIAPHRAGM
SPRING
SPRING SEAT
NUTS AND BOLTS
COATING
DIMENSIONS
MODEL
MODEL
44
SIZE
Inch mm
40
50
65
80
170
188
219
225
93
113
118
126
6
7
8
8
80
316
130
15
mm
20
25
40
50
65
112
4
4
119
149
184
212
43
52
86
101
109
5
7
8
80
80
200
316
116
130
7
15
40
50
80
100
150
177
190
286
317
392
81
103
124
138
250
7
7 12
11 1 4
12 1 2
15 3 8
1
1 12
2
2 12
323
3
MODEL
53
INCH
1 12
2
2 12
323
Inch
MODEL
45
MM
1 12
2
3
4
6
H
3
8
8
8
8
3 58
4 12
458
5
5
2 0 0 1
CONNECTIONS
FLANGES
THREADS
CONTROL BORES
ISO PN 16, PN 25
AS 2129, BS 10 TABLE D, E
ANSI CLASS 125, 150
OTHERS ON REQUEST
FEMALE ISO (BSP)
ANSI (NPT)
1
1
1
8 ", 4 ", 2 " NPT
H
3
1
3
2
4
8
4
8
8
8
2
2
3 38
4
438
4 12
518
3 1148
4
4 78
5 12
9 78
THE FACTORY RESERVES THE RIGHT TO MODIFY SPECIFICATIONS WITHOUT PRIOR NOTICE.
CAST IRON, CAST BRONZE, DUCTILE IRON

NATURAL RUBBER, OTHERS ON REQUEST
SST 302
BRASS
COATED STEEL
POLYESTER
L
MODELS 44, 45, 94
L
MODEL 53
SIZE
Inch mm
MM
INCH
L
8
8 12
381
458
495
7 8
11 1 4
12 1 8
15 3 8
12 1 8
18 1 4
21 1 4
23 1 8
6 58
7 38
8
8
9 18
14 1 4
13 7 8
15
18 1 8
19 1 2
580
755
900
495
830
970
22 7 8
29 3 4
36
19 1 2
32 3 8
38 3 4
600
900
970
36
38 3 4
2
3
4
6
50
80
100
150
233
310
356
436
175
237
265
378
12 1 4
14
17 1 8
6 78
9 38
10 1 2
14 7 8
8
10
16
200
250
400
530
636
755
481
546
830
20 7 8
25
29 3 4
19
21 1 2
32 5 8
20
24
500
600
900
900
970
970
36
36
38 3 4
38 3 4
MODELS
82, 91
1
1 12
2
323
3
4
6
32
40
50
80
80
100
150
73
73
93
116
177
183
230
110
110
131
165
278
293
380
2 78
2 78
3 34
4 58
7
7 18
9 18
4 38
4 38
5 34
6 12
11
11 1 2
15
MODEL 84
80
145
239
6 78
9 38
MODEL 94
50
251
121
9 78
4 34
MODELS
47, 77, 87
MODEL
67
2
2 12
323
3
4
6
868
8
10
12
50
65
80
80
100
203
214
200
285
307
150
200
390
389
169
188
202
203
232
360
352
200
250
300
462
540
587
14
16
20
350
400
500
24
9 14
L
MODELS 67, 77-12" TO 24"
L
MODEL 47, 67, 77, 87
MODELS 82, 84, 91
2 0 0 1
MODEL
BASIC
METAL VALVES
The standard valve can be converted into a special model by replacing the standard bonnet with one of the special kits described
below.
A standard body and diaphragm are used in the optional valves.
The conversion can be carried out on site, or supplied as a "special bonnet" model by the factory.
The code letter for each special bonnet model is indicated below (I, T.)
THROTTLING BONNET
POSITION INDICATING BONNET

Offers visual and electric indication
of the valve's position.
Available in sizes 2" - 24".
For the reduction of pressure and

flow rates.
Available in sizes 2" - 4", on all models.
COMPONENTS
Please specify model code and size when ordering spare parts. Example: Part no. 6 for 53-2
1
LONG BOLT
1
SHORT BOLT *
LIFTING HOOK *
4
4
BONNET
SPRING
SPRING SEAT
DIAPHRAGM
BODY
5
6
6
7
7
9
PLUG
10
NUT
2 0 0 1
* SIZES 6" - 24"

6
10
9
10
ORDERING GUIDE
Example: Selected is a 6" valve, flanged, cast iron, with position indicator and special low-pressure
diaphragm. Connection standard is BS10 table D.
SPECIFY:
47 I - 6 - BS 10/D - DIAP.NO.9
MODEL
(SEE PAGE 3) 44, 45, 47, 53, 67, 77, 82, 84, 87, 91, 94
SPECIAL BONNET
(IF REQUIRED)
T THROTTLING BONNET
I POSITION INDICATING BONNET
SIZE
3
4"
- 24"
CONNECTION STANDARD
ISO PN16, ANSI CLASS 125, BS 10/D, OR OTHER
SPECIAL DIAPHRAGM (IF REQUIRED)

SEE GRAPH A (PAGE 2) FOR DIAPHRAGM SERIAL NUMBERS
2 0 0 1
FOR CONTROL FUNCTIONS SEE SECTION F.
PLASTIC VALVES
DESCRIPTION
The direct-sealing diaphragm valves are operated by line pressure .
The reinforced rubber diaphragm seals the water passage when line
pressure reaches the valve's control chamber.
Relieving the pressure from the control chamber, to the atmosphere
or to downstream, causes the valve to open.
The valve's only moving component is its diaphragm; no shaft, seals,
or bearings are located within the water passage.
The valve is made of sturdy, high-quality materials. It is produced in
a number of structurally different versions (throttling, built-in solenoid
operator, etc), with a wide range of control functions (manual
activation, pressure control, etc).
MODEL 95
MODEL 96
OPENED VALVE
CLOSED VALVE
MODEL 96-6
ADVANTAGES
Structural simplicity
Reliable control of corrosive liquids
Light-weight, cost-saving
Minimum maintenance - maximum dependability
MODEL 75-1-E/D2
2 0 0 1
MODEL 75-2-T-E/D2
SIZE SELECTION GUIDE

This graph provides a guide, based on flow rate and pressure, for the proper selection of valve size.
psi mwc
140 100
Line Pressure
60
40
30
96-6
95/96-4
95/96-3
75-3
75-2 1 2
50
75-11 2
75- 3 4
60
80
75-2
80
75-1
120
100
40
30
20
#1
#1
#95
20
3w
15
10
10
8
7
#22
#22
#21
2w
#21
#22
#95
#96
#22
#21 #21
6
7
5
4
2
5
8 9 10
5
20
7 8 9 10
30
40
20
50
30
40
60 70 80 90 100
50
200
60 70 80 90 100
300
200
300
400 500 600 700 800 900 1000
m /h
gpm
Locate the flow rate on the horizontal axis and draw a line upwards.
Locate the line pressure on the vertical axis and draw a line to the right.
The intersection point of the two lines marks the appropriate valve size.
Example: line pressure 28m (40 psi), flow rate 23 m 3 /h (100 gpm), appropriate valve = model 75-2"
PRINCIPLE OF OPERATION
1 3-WAY CONTROL
This control device admits pressure into the control chamber,
closing the valve, or relieves pressure to the atmosphere,
fully opens the valve.
VALVE OPENED
VALVE CLOSED
2 2-WAY ELECTRIC CONTROL

A solenoid operator plugs the control chamber outlet.
A permanent connection from the upstream to the control
chamber ensures line pressure in the chamber and thus
valve closure. Energizing the solenoid operator causes the
control chamber to drain to downstream, opening the valve.
ENERGIZED
VALVE OPENED
DE - ENERGIZED
VALVE CLOSED

MODEL
MATERIAL
CONNECTION
SIZE
STRUCTURAL VERSION
BASIC
THROTTLING
INTEGRAL 2-WAY ELECTRIC CONTROL (DOROT SOLENOID)
INTEGRAL 3-WAY ELECTRIC CONTROL (GEMSOL SOLENOID)
THROTTLING + 2-WAY ELECTRIC CONTROL DOROT SOL.
THROTTLING + 3-WAY ELECTRIC CONTROL GEMSOL
75
GRP
TH
Inch
mm
CODE
20
1
25
11 2
40
2
50
21 2
65
95
uPVC
TH
96
uPVC
SW
3
80
3
4
6
90 110 160
3
80
T
E/D2
E/B3
T-E/D2
T-E/B3
* Non - Integral Solenoid

uPVC = UNPLASTICIZED POLYVINIL CHLORIDE
TH = THREADED
SW = SOLVENT WELDED
2 0 0 1
ABBREVIATIONS:
GRP = GLASS - REINFORCED POLYAMIDE
* FOR NON-RETURN FEATURE, PLEASE ADD N - E/D2-N
PLASTIC VALVES
HEADLOSS CHART
3-WAY CONTROL MODEL 75, 95, 96
2-WAY ELECTRIC CONTROL-MODEL 75

psi mwc
8
1
7
96-6
96-4
95/96
-3
75-11
/2
75-2
75-2
1/2
75-3
psi mwc
6
4
5
3
4
3
8
7
6
1
"
2"
3" 2"
(BLUE AREA INDICATES RECCONENDED OPERATING RANGE)
6
" 1"
5
4
5
2
1.5 1
.9
.8
1 .7
10
50 60
20
30
80
100
150
40
50 60
200
80
300
400 500
200
300
400 m /h
700 900
1300
1700 gpm
100
2
1
2
PRESSURE RATING
3
10
15
5 6
20
8 10
30
20
40 50 60
80 100
30
40 50 60 m /h
150 200
MODEL 75
SIZES " , 1" - 80 m (115 psi)
MODEL 75
SIZES 1" - 3" - 100 m (145 psi)
MODEL 95/96 SIZES 3" , 4" - 80 m (115 psi)
MODEL 96
SIZE
6"
- 100 m (145 psi)
SPECIFICATIONS
MATERIALS
VALVE: BODY
BONNET
DIAPHRAGM
SPRING
SPRING SEAT
NUTS AND BOLTS
SOLENOID OPERATOR:
COIL
PLUNGER
SEAL
CONNECTIONS
MODEL 75: 30% GLASS REINFORCED POLYAMIDE MODELS 95, 96: uPVC
30% GLASS REINFORCED POLYAMIDE
NATURAL RUBBER
SST 302
POLYAMIDE
COATED STEEL OR SST 304
THREAD:
FEMALE ISO (BSP), ANSI (NPT)
SOLVENT WELDING:
BS 4346.1/ASTM D2467/AS 1477
ISO 727, DIN 8063.
POLYESTER-COATED STEEL
SST
BUNA-N OR NR
ELECTRICAL DATA
8 WATT OPERATOR: VOLTAGE 24VAC 50HZ, OTHERS ON REQUEST
INRUSH CURRENT 1.1A, HOLDING 0.66A
3 WATT OPERATOR: VOLTAGE 24VAC, 50HZ/60HZ, OTHERS ON REQUEST
INRUSH CURRENT 0.3 A, HOLDING 0.15A
NOTE: THE STANDARD COIL IS 24 VAC, 50HZ. OTHERS ON REQUEST
DIMENSIONS
MODEL
2 0 0 1
75
75
75
75
75
75
95/96
96
96
10
SIZE
Inch
3
1
1 12
2
2 12
3
3
4
6
L
mm
20
25
40
50
65
80
80
110
160
mm
113
124
188
199
228
236
258
278
360
H
Inch
4 12
4 78
7 38
7 78
9
9 14
10 1 8
11
14
mm
70
73
110
110
119
120
195
202
380
Inch
2 34
2 78
4 38
4 38
4 58
4 34
7 58
8
15
gpm
COMPONENTS
Specify model code and size when ordering spare parts. Example: Part no. 4 for 75 - 2 - E/D2
DESCRIPTION 75-2WAY
75 - 3 4 , 1
75 - 11 2, 2, 21 2 , 3
1 LONG BOLT
13
2 SHORT BOLT
3 2-WAY BONNET
13
4 2-WAY DIAPHRAGM
5 BODY
10
10
6 2-WAY OPTIONAL THROTTLING
7 THROTTLING DISC
12
11
8 MANUAL ACTIVATION RING
9 ADAPTOR
10 O-RING
4
4
11 O-RING
12 INLET FILTER
13 2 Watt OPERATOR (2-WAY)
5
15
14 PLUG
14
15 NUT
DESCRIPTION 75-3WAY
1 LONG BOLT
2 SHORT BOLT
75 - 11 2, 2, 2 1 2, 3
2
1
2
2 SHORT BOLT
1
12
3 WASHER
4 3-WAY DIAPHRAGM
4
6
5 BODY
4 BONNET
6 3-WAY OPTIONAL THROTTLING

3
5 SPRING
7 THROTTLING DISC
6 SPRING SEAT
7 DIAPHRAGM
8 O-RING
9 8 Watt OPERATOR (3-WAY)
95 - 96
DESCRIPTION 95, 96
1 LONG BOLT
3 SPRING
75 - 11 2, 2, 2 1 2, 3
8 BODY
10 FINGER FILTER
8
5
11 NUT
12 3-WAY CONTROL VALVE ADAPTOR
10
11
9 NUT
10
11
10 FINGER FILTER
ORDERING GUIDE
1 Select valve size, using the "size selection" graph located on page 9.
2 Select valve model, using table on page 10.
Example: selected, is a 2" valve, made of glass-reinforced polyamide, controlled by a 2-way solenoid operator.
SPECIFY:
75
BSP - E/D2
MODEL
75,95,96
SIZE
",4 1", 1 1",2 2", 2 1",
2 3", 4", 6"
80mm, 90mm, 110mm, 160mm
3
CONNECTION STANDARD
11
2 0 0 1
(THREADED MODELS ONLY) NPT, BSP

STRUCTURAL VERSION (WHEN APPLICABLE)
T, E/D2, E/B3, T-E/D2, T-E/B3
FOR OTHER CONTROL FUNCTIONS REFER TO SECTION F.
TM
FLUSHGAL FILTER BACKFLUSHING CONTROL VALVES

MODELS 51, 52, 57, 58, 58P
DESCRIPTION
The selector valve, is activated by pipeline pressure. The valve can
be set in one of two positions:
1. Filtration Mode-allowing flow from the inlet manifold into the filter.
2. Flushing Mode-closing the filter inlet and opening the flush outlet,
thus causing reverse flow in the filter.
The valve is activated by a large rubber diaphragm, requiring minimum
activation pressure.
The valve can be operated automatically (using solenoid valve
activation) or manually, (using a 3-way selector valve).
MODEL 51/52
51
2X2
IRRIGATION MODE
FLUSHING MODE
MODEL 57
52
2X2
IRRIGATION MODE
FLUSHING MODE
57/58/58P
3 X 2, 3 X 3, 4 X 3, 4 X 4
IRRIGATION MODE
MODEL 58
FLUSHING MODE
2 0 0 1
MODEL 58-P (PLASLITE)
12
ADVANTAGES
1
0.9
0.8
0.7
0.6
10
3
4x
3x
57
,5
8
,5
8
57
58 3x3
P
4x
3
58
P
4x
4
,5
8p
,5
8p
3x
p
3
4
,5
8,
58
57
52
51
,5
10
9
8
7
6
5
4
mwc
10
9
8
7
6
5
58
psi
14
mwc
7
6
5
51
psi
10
9
8
7
6
HEADLOSS CHART
Structural simplicity - Easy instalation

Frictionless position exchange
High reliability
Corrosion-resistant materials
Fast alteration of flow direction
4
3
2
20
30
130
50 60 70 80 90 100
40
3
m /h
170 gpm
1
10
20
30
50 60 70 80 90 100
IRRIGATION MODE
40
50
60 70 80 90 100
200
300
400
3
200 m /h
800 gpm
FLUSHING MODE
PRESSURE RATING
MODELS 51, 52, 57, 58 Max.100 mwc (150 psi). Min. 7 mwc (10 psi)
MODEL 58 PLASLITE STANDARD Max. 60 mwc (90 psi). Min. 2 mwc (3 psi)
MODEL 58 PLASLITE HIGH PRESSURE Max. 80 mwc (120 psi). Min. 5 mwc (8 psi)
SPECIFICATIONS
MATERIALS
For Models 51,52,57,58
BODY
BONNET
SHAFT
DIAPHRAGM
SPRING
SEAL
NUT
SEAL HOUSING, DISC
MATERIALS
3X2, 4X3-CAST IRON 2X2 - BRASS
3X2, 4X3-CAST IRON 2X2 - PLASTIC
SST
NATURAL RUBBER
SST
NATURAL RUBBER
SST
BRASS
CONNECTIONS
FLANGES
THREADS
VICTAULIC
CONTROL BORES
For Model 58-P (PLASLITE)

BODY
REINFORCED POLYAMIDE
REINFORCED POLYAMIDE
BONNET
SST
SHAFT
NATURAL RUBBER
DIAPHRAGM
SST
SPRING
NATURAL RUBBER
SEAL
BRASS
NUT
SST
BOLT
E.P.D.M RUBBER
O-RING
ISO PN 16, ANSI CLASS 125

(OTHERS ON REQUEST)
FEMALE ISO (BSP), ANSI (NPT)
1
4"
NPT
13
2 0 0 1
TM
"FLUSHGAL " FILTER BACKFLUSHING CONTROL VALVES
DIMENSIONS
A
MODEL
51-2x2
52-2x2
57-3x21 2
57-4x31 2
58-3x2
58-4x3
58P-3x2 / 3x3
58P-4x3 / 4x4
mm
Inch
mm
Inch
mm
Inch
mm
Inch
185
185
256
280
235
255
292
303
175
184
175
190
175
190
678
7 14
6 78
7 12
6 78
7 12
74
74
112
121
112
127
112
127
3
3
438
434
438
5
438
5
155
155
287
305
287
317
287
317
61 8
61 8
11 1 4
12
11 1 4
12 1 2
11 1 4
12 1 2
7 8
738
10 1 8
11
914
10 1 8
11 1 2
11 7 8
A
C
57, 58
58-p
51, 52

MODEL
INLET/FILTER CONNECTION
51-2x2 (*1)
2" (50 mm) FEMALE THREAD
2"
(50 mm) FEMALE THREAD (*2)
52-2x2N (*2)
2" (50 mm) FEMALE THREAD
2"
57-3x2
3" (80 mm) FLANGES
2"
(50 mm) FEMALE THREAD
57-3x3
3" (80 mm) VICTAULIC
3"
(80 mm) VICTAULIC (*3)
57-4x3
4" (100 mm) FLANGES
3"
58-3x2
2"
58-3x3
3"
(80 mm) VICTAULIC (*3)
58-4x3
3"
58-4x4
58P-3x2 (*2)
2"
58P-3x3 (*2)
3"
58P-3x3 (*2)
3"
(80 mm) VICTAULIC
58P-4x3 (*2)
3"
58P-4x4 (*2)
(*1) Victaulic adapter available on request.

(*2) High pressure model (5-80m), add "H"
(*3) Specify BSP or NPT
2 0 0 1
FLUSHING OUTLET
14
COMPONENTS
Specify the model code and size when ordering spare parts.
Example: Part no. 10 for 57 - 2X11 2
BOLT
51, 52 2" X 2"

1
2 BONNET
SPRING
57, 58 3"X2" / 4"X3"
BOLT
2 BONNET
3
58-P1 23" X 3"
BOLT
2 BONNET
1
3
WASHER
3
WASHER
NUT
DIAPHRAGM KIT
BODY
0 - RING
NUT
3
BOLT
DIAPHRAGM KIT
BODY (3")
PLUG
5 DIAPHRAGM DISC
DIAPHRAGM
0 - RING
8 SEAT
10 GUIDE CONE (3")
OPERATOR BODY
10a GUIDE CONE (3")
O-RING
10 SEAL BOWL
10
10 0 - RING
10a
12 SEAL BOWL
10
11
10
9 SEAL
11 SEAL
9
9 SEAT (3")
STEM
7
13 LOCKING NUT
12
14 O-RING
19
11 WASHER
11
11 BODY
12 BOLT
12
11
12 SEAL BOWL
13
15 NUT
13 SEAL
12
13
16 WASHER
15 NUT
15
14
15
14 O-RING
17 ADAPTER (3")
16
14 DISC
14
13
13 SPRING
14
15
15 ADAPTER
18 BOLT
16
19 SPACER
17
18
16 LOCKING NUT
Please specify "standard" or "SK" version.
* SK version conponent
ORDERING GUIDE
Please specify the required model and connection standard.
SPECIFY:
57- 3x2 - ISO
MODEL
51-2x2, 52-2x2, 57-3x2, 57-3x3, 57-4x3, 58-3x2, 58-3x3, 58-4x3, 58-4x4, 58P-3x2, 58P-3x3, 58P-4x3, 58P-4x4
CONNECTION
15
2 0 0 1
(ISO, ANSI)
RISER VALVES
MODELS 37, 38, 39, 46, 86
DESCRIPTION
The direct-sealing diaphgragm valves, are activated by line pressure.
The valves are designed to be installed on a 3" riser, branching from
the main pipe and supplying irrigation systems on both sides of it.
Models 37 and 38 control both sides simultaneously.
Models 46 and 86 allow for independent control of each side (twin
valves).
The inlet and outlet threads for all models are 80 mm (3"), BSP or NPT
Standard.
Control accessories, such as solenoids or pilot valves, can be added
on request.
MODEL 37
MODEL 38
MODELS 37, 38
VALVE CLOSED
MODEL 39
VALVE OPENED
MODELS 39
VALVE CLOSED
VALVE OPENED
MODELS 46, 86 (TWIN VALVE)
2 0 0 1
VALVE CLOSED
16
VALVE OPENED
MODEL 46
MODEL 86
HEADLOSS CHART
psi mwc
14
10
9
8
7
10
9
8
7
6
5
/8
46 t
S
L le
DE out
MO ngle
Si
5
3
4
3
LS
46
LS ets
E
D tl
MO o ou
Tw
39
DE
MO
/8
7/
38
3
LS
DE
MO
2
1
.9
.8
.7
1.0
.6
.5
20
30
40
100
50
60
70
200
300
OPERATING PRESSURE RANGE

MODEL 37, 38 , 39
MODEL 46, 86
STANDARD
LOW PRESSURE
10 - 160 m (14 - 230 psi)

15 - 160 m (22 - 230 psi)
7 - 100 m (10 - 140 psi)
200
100
400
900
600
MODEL
37 / 38
39
46 / 86 Single outlet
46 / 86 Two outlets
BODY MATERIAL
37
38
39
46
86
90
m /h
gpm
FLOW FACTOR

MODEL
80
Kv
220
130
87
180
Cv
257
151
101
210
OUTLET CONNECTIONS
CAST IRON
CAST IRON
CAST IRON
CAST BRONZE
CAST BRONZE
LATCH (FAST CONNECTOR FOR ALUMINUM PIPES)

FEMALE THREADS
FEMALE THREADS
LATCH (FAST CONNECTOR FOR ALUMINUM PIPES)
FEMALE THREADS
A throttling handle is optional for all of the above models. Add "T" to the model code, for this option.
SPECIFICATIONS
DIMENSIONS
H
mm
305
270
219
350
320
37
38
39
46
86
Inch
12
10 5 8
8
13 3 4
12 5 8
mm
160
160
160
141
141
Inch
614
614
614
512
512
MODELS 37, 38
MODELS 39
H
L
MODELS 46, 86
17
2 0 0 1
MODEL
RISER VALVES
MATERIALS
CONPONENTS
BODY AND BONNET
DIAPHRAGM
SPRING
SPRING DISC
BOLTS AND NUTS
MODELS 37, 38, 39

CAST IRON / CAST BRONZE
NR RUBBER
SST 302
BRASS
COATED STEEL
MODELS 46, 86
CAST BRONZE
NR RUBBER
SST 302
PLASTIC
SST 304
COMPONENTS
Specify model code when ordering spare parts.
1
BOLT
BONNET
SPRING
37 / 38
1
4
SPRING SEAT
DIAPHRAGM
Example: Part no. 7 for model 37
12
39
BOLT
BONNET
SPRING
SPRING SEAT
10
2
5
PIPE SEAL
BODY
7
4
4
7
PIPE SEAL
NUT
NUT
5
PLUG
6
10
DIAPHRAGM
BODY
11
11
46 / 86
12
7
7
11
PLUG
10
DISC
PLUG
6
11
DISC
9
12
THROTTLING ASSEMBLY
10
8
11
THROTTLING ASSEMBLY
ORDERING GUIDE
Example: Selected, is a bronze twin valve, threaded, equipped with throttling handles.
SPECIFY:
MODEL
(37, 38, 39, 46, 86)
THROTTLING
(WHEN REQUIRED)
CONNECTION STANDARD
2 0 0 1
(ISO, ANSI)
18
4 6
I S O
"GALIL" RIGID-SEAL HYDRAULIC VALVES

MODELS 09, 09-AN, 09-T, 09-AN-T
DESCRIPTION
The diaphragm actuated, rigid-seal, hydraulic valve is produced
in two patterns:
1. Oblique Pattern (standard)
2. Angle Pattern (marked "AN").
The same actuator is used for both patterns.
"Normally open", "Normally closed", "Fail-safe"
and "Throttling" versions are available.
An external pipe connection converts the
basic valve to the N.C. version.
A spring, installed inside the actuator, creates
a "fail-safe", version N.O. or N.C.
A throttling device, limiting valve opening, is
optional for all versions.
MODEL 09
STANDARD MODEL
N.C.
COMMAND
MODEL 09-T
CLOSED
OPENED
COMMAND
N.O.
CLOSED
OPENED
"FAIL SAFE" (F.S.) MODEL
N.C.
COMMAND
OPENED
CLOSED
COMMAND
N.O.
OPENED
CLOSED
19
2 0 0 1
MODEL 09-AN
"GALIL" RIGID-SEAL HYDRAULIC VALVES
HEADLOSS CHART
psi mwc
6 4
5
4 3
3 2
2
1
1
0.5
0.3
10
50
60
70
80
20
100
30
50 m /h
40
200
FLOW FACTOR
SPECIFICATIONS
MODEL
09, 09-AN, 09-T, 09-AN-T
MATERIALS
BODY
ACTUATOR HOUSING
BONNET
DISCS
STEM
O-RINGS
SEAL
DIAPHRAGM
SPRING
gpm
BRASS
CAST BRONZE
GLASS REINFORCED POLYAMIDE
BRASS
SST
NBR RUBBER
NR RUBBER
NR RUBBER
SST
Kv
63
Cv
73
CONNECTIONS
THREADS
BODY CONTROL BORE
FEMALE 50 mm ISO (BSP)

2"
ANSI (NPT)
1
NPT
4"
DIMENSIONS
L
MODEL
09
09-AN
09-T
09-AN-T
mm
Inch
mm
Inch
mm
Inch
125
66
132
67
5
2 58
5 14
2 58
193
130
219
131
7 58
5 18
8 58
5 18
196
192
235
260
7 34
7 58
9 14
10 1 4
2 0 0 1
20
H
H
COMPONENTS
1
BONNET BOLT
1
BONNET
DIAPHRAGM BOLT
SMALL DISC
2
3
16
4
5
DIAPHRAGM
LARGE DISC
ADAPTER
BONNET NUT
ADAPTER SEAL (O-RING)
10
STEM SEAL (O-RING)
11
STEM
12
SEAL COUPLING NUT
13
U-LOCK
5
17
8
9
10
11
11
12
13
14
INTEGRAL SEAL
15
BODY
16
THROTTLING ASSEMBLY
17
SPRING (FS VERSION ONLY)
14
15
15
ORDERING GUIDE
Example: Selected, is the angle patterned valve, "normally-closed" (hydraulic), allowing for flow control. The threads meet the American
Standard.
SPECIFY:
09 - AN - T/NC - NPT
MODEL
0 9 , 0 9 - T, 0 9 - A N , 0 9 - A N - T
PATTERN (NOT REQUIRED FOR OBLIQUE MODEL)
(AN)
VERSION
(N.C., N.O., FS/NC, FS/NO, T)
THREAD STANDARD
21
2 0 0 1
(BSP, NPT)

DESCRIPTION
A combination of:
A basic valve (refer to sections A,B,D).
A pilot valve, one or more.
A solenoid pilot valve (on electrically activated valves).
Control tubes and fittings.
A filter for activation water.
Other accessories (relays, check valves, needle valves, etc.).
Each one of the listed control valves was designed to perform a special
hydraulic control function.
The pilot valve and other devices are selected to serve this function.
MODEL 44-323-FR
MODEL 47-12- PR/PS
MODEL 47-3-PR (2-W)
MODEL 87-4-EL
Dorot valves, are self-contained and include all the components needed
for accurate, dependable, long-life operation.
Unlisted combinations of control functions are supplied on request.
TWO CONTROL MODES ARE SUPPLIED:

1. Three-Way Mode (marked "3-way" in the catalogue):
2. Two-Way Mode (marked "2-way " in the catalogue):
The pilot valve is a selector, activated manually, electrically, or hydraulically. It vents the
main valve control chamber to the atmosphere, permitting full opening.
Pilot
Valve
Pilot
Valve
Pilot
Valve
Needle
Pilot
Valve
Valve
The pilot valve is a modulating, hydraulically-operated type, venting the main valve
control chamber to downstream, allowing only partial opening. This control model is
selected when permanent pressure loss is tolerated.
Needle
Pilot
Valve
Valve
Needle
Pilot
Valve
Valve
2 0 0 1
CLOSING
22
OPENING
SET POINT
CLOSING
OPENING
SET POINT
CONTROL FUNCTIONS
MANUAL ON-OFF VALVE (M)
Equipped with a 3-way manual selector valve, it permits the selection of the "open" or "closed" position of the main valve.
AVAILABLE:
On all 3-way controlled valves.
ELECTRIC CONTROL VALVES (EL)

A 3-way solenoid valve, activated by an electric current or electric pulse, opening or closing the main valve.
"Normally closed" position of the main valve is standard.
"Normally open" position is optional.
Electric activation can be added to most control valves on request.
AVAILABLE:
On all models.
PRESSURE REDUCING VALVE (PR)

The valve maintains a preset downstream pressure, regardless of upstream pressure or flow rate fluctuation. The
main valve is controlled by a 3-way pilot valve (permitting full opening when downstream pressure drops below the
set-point) or by a 2-way pilot valve (creating a pressure differential in any condition).
AVAILABLE:
On all models.
Model 77 - WRC Approved
PRESSURE SUSTAINING / RELIEF VALVE (PS)

The valve maintains upstream (inlet) pressure, regardless of flow rate variations.
The valve will be in the "closed" position if the inlet pressure drops below the set-point. It fully opens when upstream
pressure exceeds the set-point.
AVAILABLE:
On all models.
QUICK RELIEF SAFETY VALVE (QR)

The valve opens instantly when the pressure in the pipeline exceeds the safe level, thus relieving excess pressure in the
network.
When pressure returns to normal, the valve closes slowly, at an adjustable pace.
AVAILABLE:
On models: 45, 47, 53, 67, 77, 82, 87, 91, 94.
Model 67, 77 - WRC Approved
HYDRAULIC REMOTE CONTROL VALVE (RC)

A hydraulic relay opens or closes the valve (on which it is assembled), in response to a pressure command, carried
by a control tube from a remote control center.
The relay permits:
Quick response to the "open" and "closed" command.
The conversion of a valve from "normally-open" to "normally-closed".
Overcoming elevation differences.
On all models, excluding electric valves.
23
2 0 0 1
AVAILABLE:
FLOW RATE CONTROL VALVE (FR)

The valve limits the flow rate in the network to a preset level, regardless of inlet pressure variations.
The valve fully opens when the flow rate drops below the set-point.
AVAILABLE:
On models: 44, 45, 47, 53, 67, 77, 87, 94, 95, 96.
EXCESSIVE FLOW SHUT-OFF VALVE (FE)

(A variation of the flow rate control).
The valve closes drip-tight when the flow rate exceeds the preset maximum (due, for example, to pipe rupture).
AVAILABLE:
On models: 47, 53, 67, 77, 87, 94.
MODULATING FLOAT CONTROL VALVE (FL)

The main valve is controlled by a 1 2 " float valve, located in the tank or reservoir at the required maximum water
level.
The valve maintains a constant maximum level.
AVAILABLE:
On all models.
ELECTRIC FLOAT VALVE (FLEL)

The valve is activated by an Electric Float, that alter its position
following the rise or descent of water level in the tank.
Differential of Max. / Min. water level is adjustable.
AVAILABLE:
On all models.
DIFFERENTIAL FLOAT CONTROL VALVE (FLDI)

A float valve controls the main valve, closing it when the water reaches the maximum level, and opening it when the
water drops to its preset minimum level.
The differential between maximum and minimum levels is adjustable.
AVAILABLE:
On models: 44, 45, 47, 53, 67, 77, 87, 94, 95, 96.
ALTITUDE CONTROL VALVE (AL)

The main valve is controlled by a highly-sensitive pilot which is located outside the tank.
The pilot opens or closes the valve in response to the static pressure of the water.
The difference between maximum and minimum levels, may be adjusted
on the pilot.
2 0 0 1
AVAILABLE:
24
On all models.
CONTROL FUNCTIONS
PUMP CONTROL VALVE (BC)
The valve eliminates damaging surges caused by pump "start-up" and "shut-off".
The electrically activated valve opens gradually on pump "start-up", and closes slowly before the pump is switched off.
The valve operates as a non-slam check valve, preventing reverse flow.
AVAILABLE:
On models: 47, 53, 67, 77, 87, 94.
TWO-STAGE OPENING VALVE (TO)

The valve prevents surges, caused by the fast filling of drained pipeline. It restricts the flow rate until the network is full.
The valve fully opens when downstream pressure reaches the duty point.
AVAILABLE:
On all models.
DEEP WELL CONTROL VALVE (DW)

The valve eliminates surges caused by "start-up" and "shut-off" of vertical or submersible pumps. It is a relief valve,
assembled on the T-junction of the main pipeline.
When the pump starts, the valve closes slowly, increasing the network pressure gradually.
Before pump "shut-off" the valve opens slowly, reducing network pressure gradually.
AVAILABLE:
On models: 47, 53, 67, 77, 87, 94.
SURGE-ANTICIPATING VALVE (RE)

The valve protects the pumping system from water hammer, caused by sudden pump halting (due, for example, to power
failure). The valve is a relief valve, assembled on the T-junction of the main pipeline.
The valve opens instantly when the pump stops, relieving the returning high pressure wave. The valve closes slowly, once
the pressure returns to static level.
It functions also as a quick-relief safety valve.
AVAILABLE:
On models: 47, 53, 67, 77, 87, 94.
HYDRAULIC HYDRANT VALVE (HY)

A quick-activated fire extinguishing valve.
A two-position manual selector allows for quick, effortless operation of the valve.
A remote controlled valve is optional.
AVAILABLE:
On models: 44, 77, 82, 91.
DELUGE VALVE (DE)

A control valve for "Dry" sprinkler lines in fire-extinguishing systems.
The valve opens on the command of a pilot sensor line ("RC" version) or electric solenoid ("EL" version).
On models: 67, 77.
25
2 0 0 1
AVAILABLE:
FIRE PUMP RELIEF VALVE (PS/UL)
UL
The valve relieves excess pressure in fire-extinguishing systems.

The valve is mounted on a T-junction at the pump discharge side.
It opens when the pressure exceeds the required level.
On models 44, 77.
AVAILABLE:
ELECTRONICALLY- CONTROLLED VALVE (EC)

The main valve is controlled by DOROT "CNODOR" controller through 2 x 12VDC solenoids.
The controller can be configured to execute any control function or combination of functions, enabling remote
modification of setpoints,
automatic change of the setpoint, remote start / stop of operation and many other unique performances.
AVAILABLE:
On all models
STANDARD CONTROL DEVICES

This table lists pilot valves and other fittings assembled on the standard PN16 control valve.
Non-standard devices may be assembled on request.
CONTROL DEVICE
VALVE SIZES
3
3"-4"
4 "-323
6"-24"
SY3
SY3
SY6
8 WATT
8 WATT
PRESSURE REDUCING (3 - WAY) PILOT
3 WATT
29-100
29-100
31-300
PRESSURE REDUCING (2 - WAY) PILOT
68-400 / 68-410
68-400 / 68-410
29-200
29-200
68-600
31-300
"SAGIV" CONTROL VALVE

SOLENOID VALVE
PRESSURE SUSTAINING (3 - WAY) PILOT

QUICK RELIEF PILOT
68-200
66-300
68-500 / 68-700
66-300
FLOW RATE / EXCESSIVE FLOW PILOT
29-300
29-300
76-200
MODULATING FLOAT CONTROL PILOT
70-300
70-300
70-400
PLASTIC
PLASTIC
COPPER / PLASTIC
68-500
PRESSURE SUSTAINING (2 - WAY) PILOT
TUBING & FITTINGS
NOTE: High-pressure models 67,94 are fitted with metal pilot valves and copper tubing regardless of size.
2-way controlled valves, high-pressure, are equipped with the 68-400 pilot valve.
ORDERING GUIDE
Example: Required valve - 6" Cast Iron, flanged to European Standard, pressure reducing, electrically activated
by 220 VAC current.
SPECIFY:
47 - 6 - ISO PN16 - PR/EL - 220VAC
MODEL
(SEE PAGES 3,6,10,18)
SIZE
3
4"
- 24"
CONNECTION STANDARD
ISO PN16, ANSI 125 ETC.
CONTROL FUNCTION CODE/S

(PR, PS, EL, CV, QR, ETC.)
NON-STANDARD FEATURES
(CURRENT, DIAPHRAGM, LINING, ETC.)
2 0 0 1
26
PILOT VALVES AND ACCESSORIES

29-100 PILOT VALVE
29-100
(BLACK, 3-WAY)
1
USED FOR:
PRESSURE REDUCING VALVES (PR) SIZES:
" - 4"
ADJUSTMENT RANGE
SPRING NO.
54 (STANDARD)
COLOR
GREEN
72
YELLOW
65
RED
RANGE
10 - 45 m
14 - 65 psi
5820 30 -
25 m
35 psi
60 m
90 psi
COMPONENTS
8
MAX. LINE PRESSURE: 100 m (140 psi)

9
10
12
COMPONENT NO.
MATERIAL
1, 5, 6
3, 4, 9, 11, 12, 13, 15
10
2, 7,16, 17
8
14
BRASS
PLASTIC
NITRILE RUBBER
SST
SST, NATURAL RUBBER, PLASTIC
NATURAL RUBBER
ADJUSTING BOLT -
10
O-RING
LOCKING NUT -
11
SEALING DISC KIT -
12
PORTS SELECTION BODY PLUG SEAT -
3 SPRING IDENTIFICATION
RING
11
SPECIFICATIONS
13
14
BONNET -
13
BONNET NUT -
14
PLUG -
SPRING DISC -
15
BODY -
SPRING -
16
BRACKET
DIAPHRAGM ASSEMBLY -
17
BRACKET
DIAPHRAGM BOWL -
16
"-
15
17
29-110 PILOT VALVE
"-
29-110
(3-WAY)
USED FOR:
PRESSURE REDUCING VALVE (PR) SIZES: 3 4 " - 6"
2
3
ADJUSTMENT RANGE
54 (STANDARD)
COLOR
RANGE
10 14 20 30 -
GREEN
65
RED
29
45 m
65 psi
60 m
90 psi
30 - 130 m
45 - 190 psi
5
6
7
COMPONENTS
8
HIGH INLET PRESSURE: 160 m (230 psi)

9
10
12
COMPONENT NO.
MATERIAL
1, 5, 6, 15
3, 4, 9, 11, 12, 13
10
2, 7,16, 17
8
14
BRASS
PLASTIC
NITRILE RUBBER
SST
NATURAL RUBBER
ADJUSTING BOLT -
10
O-RING
LOCKING NUT -
11
SEALING DISC KIT -
3 SPRING IDENTIFICATION
RING
11
SPECIFICATIONS
13
14
12
PORTS SELECTION BODY -
BONNET -
13
PLUG SEAT -
BONNET NUT -
14
PLUG -
SPRING DISC -
15
BODY -
SPRING -
16
BRACKET
DIAPHRAGM ASSEMBLY -
17
BRACKET
DIAPHRAGM BOWL -
16
"-
15
17
"-
27
2 0 0 1
SPRING NO.
29-200 PILOT VALVE
29-200
(BLUE, 3-WAY)
1
USED FOR:
PRESSURE SUSTAINING/RELIEF VALVE (PS)
TWO-STAGE OPENING VALVE (TO)
REMOTE CONTROL VALVE (RC)
SIZES: 3 4 " - 4"

SIZES: 3 4 " - 4"
SIZES: 3 4 " - 4"
SIZES: 3 4 " - 4"
RANGE
ADJUSTMENT RANGE
SPRING NO.
COLOUR
54 (STANDARD)
GREEN
72
YELLOW
65
RED
2
3
10 - 45 m
14 - 65 psi
5820 30 -
25 m
35 psi
60 m
90 psi
COMPONENTS
8
1 ADJUSTING BOLT
8 DIAPHRAGM ASSEMBLY
2 LOCKING NUT
9 DIAPHRAGM BOWL
3 SI DPERNI NT IGF I C ATION RING
10 PORTS SELECTION BODY
4 BONNET
11 BODY
5 BONNET NUT
12 BRACKET-
6 SPRING DISC
13 BRACKET-
9
10
SPECIFICATIONS
COMPONENT NO.
MATERIAL
1, 5, 6
3, 4, 9, 11
2, 7
8
10
12, 13
BRASS
PLASTIC
SST
BRASS, RUBBER, PLASTIC
TEFLON
SST
12
11
13
29-300 DIFFERENTIAL
PILOT VALVE (3-WAY)
USED FOR:
EXCESSIVE FLOW SHUT-OFF VALVE (FE)
DIFFERENTIAL CONTROL VALVE (DI)
7 SPRING
29-300
1
SIZES: 2 " - 4"

SIZES: 2 " - 4"
SIZES: 2 " - 4"
2
3
4
5
ADJUSTMENT RANGE
(PRESSURE DIFFERENTIAL)
SPRING NO.
COLOUR
RANGE
2
3
6
8
82 (STANDARD)
72
YELLOW
- 5m
- 7 psi
- 20 m
- 30 psi
2 0 0 1
10
COMPONENT NO.
MATERIAL
1, 5, 9, 11
2,6
4
3, 7, 12, 13
8
10
PLASTIC
BRASS
NITRILE RUBBER
SST
BRASS, NITRILE RUBBER
COMPONENTS
1 COVER
2 ADJUSTING BOLT
9 DIAPHRAGM BOWL
3 LOCKING NUT
10 PORTS SELECTION BODY KIT
SEAL
4 COVER
(O-RING 6-360)
11 BODY
5 BONNET
12 BRACKET-
6 SPRING DISC
13 BRACKET-
SPECIFICATIONS
28
12
11
13
7 SPRING
31-300 PILOT VALVE (3-WAY)

USED FOR:
SIZES: 6" - 16"
PRESSURE SUSTAINING/RELIEF VALVE (PS) SIZES: 6" - 16"
TWO STAGE OPENING VALVE (TO)
SIZES: 6" - 16"
ADJUSTMENT RANGE
SPRING NO.
47 (STANDARD)
RANGE
GREEN
10 - 60 m
14 - 90 psi
YELLOW
50
RED
76
BLACK
2
3
COLOUR
42
31-300
5 - 30 m
8 - 45 psi
20 - 86 m
30 - 130 psi
70 - 190 m
100 - 285 psi
COMPONENTS
7
SPECIFICATIONS
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 9
3
6, 10, 11
7
8
BRASS
PLASTIC
SST
SST, NATURAL RUBBER, BRASS
NITRILE RUBBER
10
11
66-200 HYDRAULIC
ACCELERATOR RELAY
1 ADJUSTING BOLT
2 LOCKING NUT
8 BODY O-RING
3 SPRING
IDENTIFICATION RING
9 BODY
4 BONNET
10 BRACKET
5 SPRING DISC
11 BRACKET BOLT
6 SPRING
66-200
(3-WAY)
1
USED FOR:
ELECTRICALLY CONTROLLED VALVE (EL)
ALTITUDE CONTROL VALVE (AL)
PUMP CONTROL VALVE (BC)
REMOTE CONTROL VALVE (RC)
SIZES: 6" - 24"

SIZES: 6" - 24"
SIZES: 3" - 16"
SIZES: 6" - 16"
OPERATING CONDITIONS
SPRING NO.
RANGE
15
20
2
3
73 (STANDARD)
86
100 m
140 psi
100 m
140 psi
COMPONENTS
6

8
MATERIAL
1, 5, 6, 8, 11
2, 9
3
4
7, 10
BRASS
SST
NITRILE RUBBER
NATURAL RUBBER
1 BONNET
7 SEAL
2 SPRING
8 SEALS HOUSING
9 SEAL BOLT
4 BODY O-RING
10 SEAT WASHER
5 BODY
11 SEAT
10
11
6 SEAL DISC
29
2 0 0 1
SPECIFICATIONS
COMPONENT NO.
66-300 FAST REACTING

PILOT VALVE (3-WAY)
USED FOR:
QUICK RELIEF VALVE (QR)
SIZES: 3" - 24"
SURGE ANTICIPATING VALVE (RE) SIZES: 3" - 24"
SUSTAINING / RELIEF VALVE (PS) SIZES: 6" - 24"
66-300
1
2
3
4
5
ADJUSTMENT RANGE
SPRING NO.
47 (STANDARD)
COLOUR
RANGE
GREEN
10 - 60 m
14 - 90 psi
42
YELLOW
50
RED
5 - 30 m
8 - 45 psi
20 - 90 m
30 - 130 psi
COMPONENTS
SPECIFICATIONS
12
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 9, 10, 12
3
6, 13, 15, 16, 17
7
8, 14
11
BRASS
PLASTIC
SST
NITRILE RUBBER
NATURAL RUBBER
ADJUSTING BOLT
11 SEAL DISC
LOCKING NUT
12 SEAL
19
SPRING
IDENTIFICATION RING
13 SEAL HOUSING
11
BONNET
14 SEAL BOLT
SPRING DISC
15 SEAT WASHER
SPRING
16 SEAT
DIAPHRAGM ASSEMBLY
17
18
13
10
14
15
16
17 BRACKET
8 BODY O-RING
18 BRACKET BOLT
9 BODY
19 PLUG
10 SEAL DISC
68-200 PILOT VALVE (2-WAY)
68-200
USED FOR:
QUICK-RELIEF VALVE (QR) SIZE: 2"
1
2
3
ADJUSTMENT RANGE
4
(PRESSURE DIFFERENTIAL):
SPRING NO.
58 (STANDARD)
COLOUR
RANGE
10 - 90 m
14 - 130 psi
5 - 20 m
8 - 30 psi
80 - 140 m
115 - 200 psi
GREEN
78
YELLOW
63
RED
5
6
15
COMPONENTS
7
8
9
10
2 0 0 1
SPECIFICATIONS
12
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 10, 11, 13, 14

3
6, 9
7
8, 12
BRASS
PLASTIC
SST
NITRILE RUBBER
30
1 ADJUSTING BOLT
9 SST SEAT
2 LOCKING NUT
10 BODY
11
SPRING
I D E N T I F I C ATION RING
11 NOZZLE BOLT
BONNET
12 O-RING
SPRING DISC
13 2"-QR BONNET
SPRING
14 PILOT LOCKING NUT
DIAPHRAGM ASSEMBLY
15 SLIDING WASHER
BODY O-RING
13
14
NEW 68-410
68-410 PILOT VALVE

(2-WAY)
USED FOR:
PRESSURE REDUCING VALVE (PR) SIZES: 2"- 6"
HIGH PRESSURE
1
2
3
ADJUSTMENT RANGE
SPRING NO.
58 (STANDARD)
COLOUR
RANGE
10 - 110 m
15 - 160 psi
5 - 30 m
8 - 45 psi
20 - 200 m
30 - 300 psi
GREEN
78
YELLOW
63
RED
7
8
COMPONENTS
1
ADJUSTING BOLT
8 BONNET WASHER
LOCKING NUT
9 DIAPHRAGM
SPRING
I D E N T I F I C ATION RING
10 DIAPHRAGM BOTTOM LOCK
BONNET
11 NOZZLE
SPRING DISC
12 SEAL ASSEMBLY
SPRING
13 BALANCING SPRING
DIAPHRAGM TOP DISK
14 BODY
9
10
11
SPECIFICATIONS
12
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 8, 14
3
6, 10, 13
7, 9
11, 12
BRASS
PLASTIC
SST
NITRILE RUBBER
68-420 PILOT VALVE

(2-WAY)
13
14
NEW 68-420
USED FOR:
PRESSURE REDUCING VALVE (PR) SIZES: 3 4"- 6"
1
2
ADJUSTMENT RANGE
SPRING NO.
RANGE
4 - 120 m
6 - 175 psi
20
7
8
COMPONENTS
1
ADJUSTING BOLT
8 BONNET WASHER
LOCKING NUT
9 DIAPHRAGM
11
BONNET
10 DIAPHRAGM BOTTOM LOCK
12
BONNET NUT
11 NOZZLE
SPRING DISC
12 SEAL ASSEMBLY
SPRING
13 BALANCING SPRING
DIAPHRAGM TOP DISK
14 BODY
9
10
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 8, 10
3, 7, 14
6, 11, 13
12
9
BRASS
PLASTIC
SST
NITRILE RUBBER
13
14
31
2 0 0 1
SPECIFICATIONS
68-500 PILOT VALVE
68-500
(2-WAY)
USED FOR:
PRESSURE SUSTAINING VALVE (PS) SIZES: 2"- 6"
2
3
ADJUSTMENT RANGE
SPRING NO.
COLOUR
RANGE
58 (STANDARD)
GREEN
10 - 90 m
14 - 130 psi
78
YELLOW
63
RED
5 - 20 psi
8 - 30 psi
80 - 140 m
115 - 200 psi
COMPONENTS
13
7
ADJUSTING BOLT
8 BODY O-RING
LOCKING NUT
9 BODY
SPRING
IDENTIFICATION RING
10 O-RING
10
BONNET
11 LOCKING NUT
11
SPRING DISC
12 NEEDLE BOLT
SPRING
13 SLIDING WASHER
DIAPHRAGM ASSEMBLY
SPECIFICATIONS
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 9, 11
3
6,, 12
7
8, 10
BRASS
PLASTIC
SST
NITRILE RUBBER
12
68-600 PILOT VALVE
68-600
(2-WAY)
1
USED FOR:
PRESSURE REDUCING VALVES (PR) SIZES: 8" - 24"
2
3
4
5
ADJUSTMENT RANGE
SPRING NO.
47 (STANDARD)
COLOUR
RANGE
10 - 150 m
15 - 220 psi
5 - 80 m
8 - 110 psi
20 - 250 m
30 - 360 psi
GREEN
42
YELLOW
50
RED
6
7
COMPONENTS
1
ADJUSTING BOLT
10 BODY
LOCKING NUT
11 SEAL
SPRING
IDENTIFICATION RING
12 PLUG
BONNET
13 SEAL
SPRING DISC
14 BALANCING SPRING
14
SPRING
15 SEAL HOUSING
BODY ADAPTER
16 PLUG O-RING
DIAPHRAGM ASSEMBLY
17 PLUG
O-RING
10
12
13
11
2 0 0 1
SPECIFICATIONS
15
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 9, 10, 12, 13
3
6, 14, 15, 16, 18, 19
7
8, 11
BRASS
PLASTIC
SST
NITRILE RUBBER
32
16
17
68-700 PILOT VALVE
68-700
(2-WAY)
1
USED FOR:
PRESSURE SUSTAINING VALVES (PS) SIZES: 8" - 24"

HIGH PRESSURE APPLICATIONS
2
3
4
5
6
ADJUSTMENT RANGE
SPRING NO.
50
COLOUR
RANGE
RED
20 - 250 m
30 - 360 psi
COMPONENTS
8
9
ADJUSTING BOLT
11 SEAL DISC
LOCKING NUT
12 SEAL DISC
SPRING
IDENTIFICATION RING
13 SEAL
BONNET
14 SEAL HOUSING
BODY ADAPTER
15 SEAL BOLT
SPRING DISC
16 SEAT WASHER
11
SPRING
17 SEAT
15
DIAPHRAGM ASSEMBLY
18 BRACKET
10
20
18
19
SPECIFICATIONS
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 9, 10, 12, 14, 18

3
6, 13, 15, 16, 17
7
8, 14
11
BRASS
PLASTIC
SST
NITRILE RUBBER
NATURAL RUBBER
13
12
14
16
9 BODY O-RING
19 BRACKET BOLT
10 BODY
20 PLUG
17
70-110 ALTITUDE
CONTROL PILOT VALVE
70-110
1
(3-WAY)
2
3
USED FOR:
ALTITUDE CONTROL (AL) VALVE SIZES 2" - 24"
ADJUSTMENT RANGE
(ELEVATION BELOW WATER LEVEL)
COLOUR
50 (STANDARD)
RED
47
GREEN
76
BLACK
RANGE
3 - 12 m
9 - 36 ft
1.5 - 5 m
5 - 15 ft
10 - 50 m
30 - 150 ft

HIGH-LOW LEVEL DIFFERENTIAL 0.3 - 4 m ( 1 - 12 feet )
COMPONENTS
10
1 ADJUSTING BOLT
12 DIAPHRAGM LOWER DISC
11
2 LOCKING NUT
13 LOWER BOWL
12
INDENTIFICATION
3 SPRING
RING
14 BOWL'S NUT
4 BONNET
15 BOWL'S SEAL
5 SPRING DISC
16 PLUNGER
14
6 SPRING
17 PLUNGER SPRING
16
7 BOWLS BOLT
18 BODY O-RING
8 UPPER BOWL
19 BODY
9 DIAPHRAGM BOLT
20 SEAT O-RING
21
10 DIAPHRAGM UPPER DISC
21 SEAT LOCKING NUT
21
11 DIAPHRAGM
22 SEAT
13
SPECIFICATIONS
15
COMPONENT NO.
MATERIAL
1, 2, 4, 5, 9, 10, 12, 14, 19, 21, 22

3
6, 7, 16, 17
8, 13
11, 15
18, 20
BRASS
PLASTIC
SST
BRONZE
NATURAL RUBBER
NITRILE RUBBER
17
18
19
20
18
33
2 0 0 1
SPRING NO.
DIFFERENTIAL FLOAT PILOTS

70-200 ELECTRIC FLOAT
USED FOR:
ELECTRICALLY-ACTIVATED VALVES, ALL SIZES
MODULATING FLOAT PILOTS

70-300 FLOAT PILOT VALVE
(PLASTIC, 2-WAY)
USED FOR:
FLOAT CONTROL VALVES (FL), LOW PRESSURE (80 m, 115 psi), ALL SIZES
MODULATING FLOAT PILOTS

70-400 FLOAT PILOT VALVE
(METAL, 2-WAY)
USED FOR:
FLOAT CONTROL VALVES (FL), HIGH PRESSURE (UP TO 250 m, 360 psi), ALL SIZES
70-550 DIFFERENTIAL
FLOAT PILOT VALVE
(3-WAY, 4-WAY)
COMPONENTS
70-550
HUB NUT
VALVE BOLT
SUSPENSION PLATE
HUB
VALVE
2
3
USED FOR:
DIFFERENTIAL LEVEL CONTROL VALVES (DIFL1)
ALL SIZES
4
5
8
9
12
MAX. LINE PRESSURE:
250 m (360 psi)
HIGH-LOW LEVEL DIFFERENTIAL: 5 - 40 cm (ONE ROD)

5 -100 cm (TWO RODS)
5 -160 cm (THREE RODS)
BALANCING WEIGHT
WEIGHT BOLT
WEIGHT ARM
7
13
10
9
9
11
9 LOCKING RING
10 VALVE SHAFT BOLT
14
11 VALVE ARM
12 PIN
13 ROD CONNECTOR
2 0 0 1
SPECIFICATIONS
COMPONENT NO.
MATERIAL
1, 2, 3, 4, 7, 10, 12, 14, 16, 17

6, 8, 11, 13, 15
5
9
SST
BRASS
BRASS, SST, RUBBER
BRONZE
34
16
14 ROD
15
17
15 STOPPER
15
16 STOPPER BOLT
17 FLOAT
16
16
70-600 DIFFERENTIAL FLOAT

PILOT VALVE (3-WAY)
USED FOR:
DIFFERENTIAL LEVEL CONTROL (DIFL 2) VALVES, ALL SIZES
70-600
4
3
1
6
14
10
8
9
7
4
COMPONENTS
13
10
11
BODY
BOLT
O-RING
ARM
SHAFT
10
BOLT
NUT
11
SPRING WASHER
BOLT
12 F L O AT
BOLT
13 FIXING INSERT
CAM
14 NUT
12
SPECIFICATIONS
COMPONENT NO.
MATERIAL
1, 14
3, 4, 5, 6, 7, 8, 9, 10, 11, 12
13
2
BRASS
SST
PLASTIC
NITRILE RUBBER
76-200 DIFFERENTIAL
PILOT VALVE (3-WAY)
USED FOR:
SIZES 6" - 24"
EXCESSIVE FLOW SHUT-OFF VALVE (FE) SIZES 6" - 24"
DIFFERENTIAL CONTROL VALVE (DI)
SIZES 6" - 24"
76-200
1
2
3
ADJUSTMENT RANGE
(PRESSURE DIFFERENTIAL)
SPRING NO.
COLOUR
RANGE
2
3
6
9
9
13
70 (STANDARD)
69
47
GREEN
- 5m
- 8 psi
- 8m
- 12 psi
- 60 m
- 85 psi
COMPONENTS
COVER
SPRING
ADJUSTING BOLT
DIAPHRAGM ASSEMBLY
LOCKING NUT
BODY O-RING
COVER SEAL
10 BODY
BONNET
11 BRACKET
SPRING DISC
12 BRACKET BOLT
SPECIFICATIONS
COMPONENT NO.
MATERIAL
1, 2, 5, 6, 10
4
3, 7, 11, 12
8
9
BRASS
SYNTHETIC RUBBER
SST
NITRILE RUBBER
11
12
10
35
2 0 0 1
76-600 PILOT VALVE
76-600
(2-WAY)
USED FOR:
ALTITUDE CONTROL (AL) VALVE SIZES 3" - 24"
FLOW RATE CONTROL (FR) VALVE SIZES 3" - 24"
2
3
4
COMPONENTS
6
ALTITUDE CONTROL
SPRING NO.
COLOUR
47
GREEN
50 (STANDARD)
RED
76
BLACK
RANGE
0.5 1.5 2 6 2 6 -
5m
16 ft
7m
23 ft
30 m
98 ft
11
17 Bowl`s seal
Adjusting bolt
18 Plunger spring
Locking Nut
19 Nut
Cover seal
20 Diaphragm assembly
Bonnet
21 O-Ring
Spring disk
22 Body
Spring
23 Plug
Spring disk
24 Sealing insert
Bowls bolt
25 Washer
12
13
14
31
15
FLOW RATE CONTROL

COLOUR
47
Cover
10
MAX. UPSTRAEM PRESSURE: 100 m
SPRING NO.
GREEN
16
RANGE
0.5 - 5 m
0.8 - 8 psi
MAX. UPSTRAEM PRESSURE: 160 m
19
17
18
20
21
10 O-Ring
26 Seal
22
11 Upper bowl
27 Seal housing
12 Diaphragm bolt
28 O-Ring
13 Diaphragm upper disk
29 O-Ring
14 Diaphragm
30 Plug
15 Diaphragm lower disk
31 Suspension Bracket
23
24
SPECIFICATIONS
25
COMPONENT NO.
MATERIAL
1, 2, 5, 6, 8, 12, 15, 20, 22, 23

3, 7, 9, 18, 19, 24, 25, 27, 30, 31
4
10, 21, 28, 29
11,13,16
14, 17, 26
BRASS
SST
SYNTHETIC RUBBER
NBR RUBBER
BRONZE
NR RUBBER
26
27
28
29
30
16 Lower bowl
"DOROT" SOLENOID VALVE

3-WAY SOLENOID INCLUDES BASE, 2-WAY OPERATOR EXCLUDES BASE
USED FOR:
ELECTRIC VALVES (EL)
SIZES: 3 4 " - 323"
MAX. OPERATING PRESSURE - 100 m (150 psi)
ELECTRIC DATA
STANDARD COIL - 24 V AC, 50 HZ, INRUSH CURRENT 0.29 A, HOLDING 0.14 A
OTHERS ON REQUEST
ALLOWED VOLTAGE VARIATION 10%
2 0 0 1
MODEL NO. 71-NO

MODEL NO. 71-BP
36
STANDARD NORMALLY-OPEN, 3-WAY SOLENOID

STANDARD OPERATOR 2-WAY
71-NO
71-BP
"BACCARA" SOLENOID VALVE N.O. OR N.C. (3-WAY)

USED FOR:
ELECTRIC VALVES (EL)
SIZES: 3" - 24"
PUMP CONTROL VALVES (BC) SIZES: 3" - 24"
ORIFICE DIAMETER (mm)
MAX. PRESSURE
1.6 (STANDARD)
0.8
2.4
3.0
150 m / 220 psi

250 m / 360 psi
60 m / 90 psi
40 m / 60 psi
30-NO
30-NC
30-BP
ELECTRIC DATA
STANDARD COIL - 24 VAC, 50 HZ, INRUSH CURRENT 1.08 A, HOLDING 0.6 A
OTHERS ON REQUEST
ALLOWED VOLTAGE VARIATION +/-10%
MODEL NO. 30-NO

MODEL NO. 30-NC
MODEL NO. 30-BP
MODEL NO. 30-CO
STANDARD NORMALLY-OPEN, 3-WAY SOLENOID VALVE

STANDARD NORMALLY-CLOSED, 3-WAY SOLENOID VALVE
STANDARD OPERATOR 3-WAY (24 VAC, 50 HZ, 1,6 mm ORIFICE)
COIL (SPECIFY VOLTAGE, FREQUENCY)
ACCESSORIES
3-WAY CONTROL VALVE
USED FOR:
Manual activation of hydraulic valves.
MODEL NO. 35- 1 8"-3
"SAGIV" SY 3 ( 1 8 " CONNECTION)
MODEL NO. 35- 1 4"-3
"SAGIV" SY 3 ( 1 4 " CONNECTION)
MODEL NO. 35- 4"-6
"SAGIV" SY 6 (LARGE PASSAGES)
2-WAY BALL VALVE

USED FOR:
Temporary isolation of control devices from pressure line.
Cancellation of pilot valve controls.
MODEL NO. 34 -1 8 "
MODEL NO. 34 -1 4 "
MODEL NO. 34 -1 2 "
PRESSURE SELECTOR TEE

("SHUTTLE VALVE")
USED FOR:
Activation of main valve by two (or more) control devices.
MODEL NO. 12-6-05
(PLASTIC, 6 mm CONNECTIONS)
MODEL NO. 12-8-05
(PLASTIC, 8 mm CONNECTIONS)
MODEL NO. 12- 1 4 -01
(BRASS,1 4 " CONNECTIONS)
NEEDLE VALVE
USED FOR:
Restriction of flow in 2-way control systems.
Restriction of response time in 3-way control systems.
1
MODEL NO. 34 - 4 - NE-1
(BRASS
(SST
" CONNECTIONS)
" CONNECTIONS)
37
2 0 0 1
MODEL NO. 34 - 1 4 -NE
HYDRAULIC RELAY 28-200

USED FOR:
Electric Control (EL).
Remote hydraulic control (RC).
sizes: 6" - 24"

sizes: 3" - 24"
SELF-FLUSHING ("FINGER") FILTER

USED FOR:
Filtration of activation water
MODEL NO. 81-1 2 -2
MODEL NO. 81-1 4 -24
MODEL NO. 81-1 4 -58
81- 1 4 -24
" MALE, 1 2 " FEMALE, BRASS
" MALE, 1 4 " FEMALE, BRASS
" MALE, 1 8 " FEMALE, PLASTIC
81- 1 4 -58
81- 1 2 -2
LIMIT SWITCH
USED FOR:
Electric indication of valve position.
Pump Control valve (BC).
Deep Well Control valve (DW).
all sizes.
sizes: 2" - 24"
sizes: 2" - 24"
MODEL NO. 40-LS
LIMIT SWITCH
MODEL NO. 48-LB
BRACKET + BOLTS, NUTS
HYDRAULIC RELAY (3-WAY)

USED FOR:
Remote Controlled Valve (RC).
MODEL NO. 33- 1 8
sizes
" - 4"
"GALIT"
P.E CONTROL TUBE CONNECTORS

USED FOR:
Assembly of control valve.
sizes:
36
" - 4"
37
AVAILABLE: 6mm OR 8mm O.D. TUBE FITTINGS 1 8" OR 1 4" BSP MALE THREADS
MODEL NO. 36
ELBOW CONNECTOR
MODEL NO. 37
STRAIGHT CONNECTOR
MODEL NO. 39
BRANCH T-SHAPE
SPECIFY REQUIRED FITTING BY CAT. NO. - PIPE SIZE - THREAD

EXAMPLE: 36-6- 1 8 IS AN ELBOW CONNECTOR FOR A 6mm PIPE,
39
" THREAD
PRESSURE CHECK POINT

USED FOR:
Pressure testing valve.
MODEL NO. 32 -
sizes: 1 1 2 " - 4"
32 -
CHECK VALVE
USED FOR:
Assembly of two control sources on the valve.
Pump Control Valve (BC).
MODEL NO. 21 - 1 2
2 0 0 1
MODEL NO. 31 - 1 8
38
21 -
31 -
GENERAL DATA
DIAPHRAGMS LIST
The DOROT valve can be equipped with various types of special diaphragms besides the standard one. These allow for the adaptation
of unusual operating conditions, such as very low pressure, extreme regulation requirements, or corrosive liquids.
Note: The standard diaphragm will be assembled in the valve unless ordered otherwise.
GAL METAL VALVES

MODEL
45
SIZE
(INCH)
" , 1"
44, 45,
112 "
53, 91
44, 45,
2", 21 2 ",
47, 77
323"
2"
67, 94
44, 45,
47, 53,
3",4"
77, 82,
84, 87
DIAPHRAGM SERIAL OPERATING RANGE

m
psi
DEFINITION NUMBER
MODEL
SIZE
(INCH)
DIAPHRAGM
DEFINITION
SERIAL OPERATING RANGE

m
psi
NUMBER
STANDARD
18
12-160
17-230
67
3"
HIGH PRESSURE
70
10-250
14-360
NITRILE
19
12-160
17-230
67
4"
HIGH PRESSURE
71
10-250
14-360
E.P.D.M
51
12-160
17-230
LOW PRESSURE
85
5-100
7-140
STANDARD
13
12-160
17-230
Cancelled
LOW PRESSURE
EXTREME REGULATION
17
20-160
28-230
47, 53,
LOW PRESSURE
82
5-50
7- 70
77, 87
NITRILE
80
12-160
17-230
NITRILE
46
20-160
28-230
E.P.D.M
55
12-160
17-230
LOW PRESSURE (SP)

E.P.D.M
NITRILE
NITRILE
NEOPRENE
35
9
62
91
38
44
93
75
7-160
5-100
20-160
2- 60
7-160
7-160
10-250
10-250
10-230
7-140
30-230
3-85
10-230
10-230
14-360
14-360
STANDARD
15-160
21-230
LOW PRESSURE
7-100
10-140
EXTREME REGULATION
60
20-160
28-230
HIGH PRESSURE
NITRILE
NEOPRENE
72
68
76
10-250
10-250
10-250
14-360
14-360
14-360
LOW PRESSURE E.P.D.M
53
7-100
10-140
NITRILE
42
15-160
21-230
E.P.D.M
54
15-160
21-230
NEOPRENE (UL)
64
15-160
21-230
36
37
67
45
7-160
2-100
20-160
7-160
10-230
3-140
28-230
10-230
HIGH PRESSURE
69
10-250
15-350
STANDARD
LOW PRESSURE
EXTREME REGULATION
E.P.D.M
NITRILE
NITRILE
NEOPRENE
32
5
61
56
66
43
65
7-160
4-100
20-160
7-160
4-100
12-160
7-160
10-230
6-140
28-230
10-230
6-140
17-230
10-230
67
47,77,
87
67
47,77,
87
Standard
6",868"
6"
STANDARD
LOW PRESSURE
8",12",14"
EXTREME REGULATION
NITRILE
8"
HIGH PRESSURE
73
10-250
14-360
10"
STANDARD
LOW PRESSURE
40
50
7-160
2-100
14-360
10-230
HIGH PRESSURE
78
10-250
14-360
LOW PRESSURE
92
2-100
3-140
HIGH PRESSURE
LOW PRESSURE
78
92
7-250
2-100
10-360
3-140
67
10"
67, 77
16",20",24"
BACKFLUSHING VALVES
(INCH)
SIZE
DIAPHRAGM
DEFINITION
(57, 58)
STANDARD
3"X2"/3"X3"/4"X3"/4"X4"
HIGH PRESSURE
(51, 52)
(58P)
3"X2"/3"X3"/4"X3"
4"X4"
SERIAL
NUMBER
OPERATING RANGE
m
psi
5M
4-100
6-140
89M
15-160
22-230
STANDARD
5-100
7-140
STANDARD
97
10-60
14-85
HIGH PRESSURE
98
20-100
28-140
PLASTIC VALVES MODEL 75

3
4 ", 1"
11
2 ",
2",21
2 ",
3"
OPERATING RANGE
DIAPHRAGM
DEFINITION
SERIAL
NUMBER
psi
VERSION "E"
VERSION "TE"
1
25
5-80
5-80
7-110
7-110
STANDARD
21
10-100
15-140
VERSION "E"
22
8-100
11-140
VERSION "T"
21
8-100
11-140
VERSION "TE"
22
10-100
15-140
39
2 0 0 1
SIZE
(INCH)
GENERAL DATA
DIAPHRAGMS LIST (CONT.)

PLASTIC VALVES MODEL 95/96
SIZE
DIAPHRAGM
DEFINITION
(INCH)
OPERATING RANGE
SERIAL
NUMBER
psi
3",4"
STANDARD
95
6-80
8-110
6"
STANDARD
52
5-100
8-145
RISER VALVES
OPERATING RANGE
MODEL
DIAPHRAGM
DEFINITION
37,38, 39
STANDARD
41
15-160
22-230
STANDARD
15-160
22-230
LOW PRESSURE
7-100
10-140
12
4-50
6-70
46,86
SERIAL
NUMBER
LOW PRESSURE (SP.)
psi
MODEL 09
SIZE
DIAPHRAGM
DEFINITION
(INCH)
2
OPERATING RANGE
SERIAL
NUMBER
STANDARD
psi
5-100
7-140
WEIGHTS (ROUNDED VALUES)

SIZE
20
25
32 11 4 40 1 1 2
50
65 2 1 2 80 323 80
3 100
LF
MODEL
kg
lbs
kg
lbs
2.2
kg
lbs
lbs
kg
lbs
2.2 4.9
3.2
1.8
2.6 5.7
1.8
kg
kg
lbs
kg
lbs
kg
lbs
3.6 7.9
4.5 9.9
11
24
3.4 7.5
3.9 8.5
kg
lbs
GAL METAL VALVES

44
45
0.9
47
7.2
24
17
38
22
48
3.7 8.1
67
2.6 5.7
10 22
11
30
24
66
11
38
24
84
77
7.7
11.8 27 18.2 41 23.5 51
53
16
11
17
82
18
84
40
10.8 24
87
91
1.7 3.7
1.7 3.7
94
18
19
2.4 5.3
6
13
2.2
43
24
53
3.6 7.9
PLASTIC VALVES
75
0.2 0.4
0.2 0.4
0.9
95/96
1.3 2.7
1.4 3.1
4.2 9.3
4.2 9.3
RISER VALVES
37, 38
9.2
39
7.9 17.4
46
8.1
18
86
7.6
17
20
BACKFLUSHING CONTROL VALVES

57-3 X2
22
48
57-3 X3
22
48
57-4 X3
58-3 X 2
15
33
58-3 X 3
15
33
25
58-4 X 3
16
35
58-4 X 4
16
35
58P 3x2
4.1
58P 3x3
4.1
58P 4x3
4.3 9.5
58P 4x4
4.3 9.5
MODEL 09
3.2
2 0 0 1
56
40
WEIGHTS (ROUNDED VALUES)

SIZE
150 6
kg
MODEL
lbs
200 868 200

LF
kg
lbs
kg
8 250 10 300 12 350 14 400 16 500 20 600 24

lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg lbs
GAL METAL VALVES

47
46 100 50 110 80 176 117 257 156 344
53
67
31 68
75 165
77
49 107 54 117 86 188 125 275 167 368 172 379 405 892 674 1484 696 1532
82
45
87
51 112
123 271 190 419
433 954
99
89 196 131 288 174 383 180 396
STANDARD VALVE
MATERIAL SPECIFICATIONS
CAST IRON
DUCTILE IRON (SGI)
CAST BRONZE
BRASS
SST: SPRINGS
BOLTS, NUTS
PILOT COMPONENTS
STEEL BOLTS
RUBBER: DIAPHRAGMS
O-RINGS
PLASTIC
COATING
ISO 185 (ASTM A126)

ISO 1083
BS 1400 LG2, SAE 40
ISO 426, DIN 17660
SST 302
SST 304
SST 303/304/316
ZINC PLATED CARBON STEEL
NYLON REINFORCED POLYISOPRENE (NR)
NITRILE (NBR)
GLASS REINFORCED POLYAMIDE (NYLON) OR uPVC
ELECTROSTATICALLY APPLIED, OVEN BAKED POLYESTER
PRESSURE RATING OF STANDARD CONNECTIONS

mwc
psi
TAG
MARKING
C.I., SGI, C.B.
100
140
PN 10
C.I., SGI, C.B.
160
230
PN 16
ISO PN 25
C.I., SGI, C.B.
250
360
PN 25
ANSI 125
C. I.
140
200
AN 125
STANDARD
VALID FOR
ISO PN 10
ISO PN 16
PRESSURE RATING
ANSI 150
C.I., SGI, C.B.
170
250
AN 150
AS 2129, BS 10 / D
C.I., C.B.
100
140
BS D
AS 2129, BS 10 / E
C.I., C.B.
160
230
BS E
JIS 5K
C.I., SGI.
50
70
JIS 5
JIS 10K
C.I., SGI.
100
140
JIS 10
JIS 16K
C.I., SGI.
160
230
JIS 16
JIS 20K
C.I., SGI.
200
280
JIS 20
ABBREVIATIONS: C.I.= CAST IRON, SGI = DUCTILE IRON, C.B.=CAST BRONZE
CAPACITY OF CONTROL CHAMBERS

SIZE
METRIC
USIS
30 cm3
1.8 in3
1"
30 cm3
1.8 in3
4.2 in3
4"
1 2"
70 cm
2", 2 2 ", 323"
160 cm
10 in3
3", 4"
0.6 LIT.
37 in3
6", 868"
1.8 LIT.
0.5 GAL.
8"
4.7 LIT.
1.2 GAL.
10"
6.5 LIT.
1.7 GAL.
12"
9.4 LIT.
2.5 GAL.
14"
9.4 LIT.
2.5 GAL.
16"
12.5 LIT.
3.3 GAL.
20"
25 LIT.
6.6 GAL.
24"
25 LIT.
6.6 GAL.
41
2 0 0 1
GAL VALVES MODELS 44, 45, 47, 53, 77, 82, 84, 87,91
GENERAL DATA
CAPACITY OF CONTROL CHAMBERS (CONTINUED)

HIGH PRESSURE VALVES MODELS 67, 94
SIZE
METRIC
USIS
2"
180
cm3
11 in3
3"
300 cm3
18 in3
4"
0.5 LIT.
30 in3
6"
2 LIT.
0.5 GAL.
8"
4.8 LIT.
1.3 GAL.
10"
6.2 LIT.
1.6 GAL.
16"
12.5 LIT.
3.3 GAL.
METRIC
USIS
PLASTIC VALVES MODELS 75

SIZE
3
", 1"
36 cm
1 1 2 ", 2", 3"
180
2.2 in3
cm3
11 in3
PLASTIC VALVES MODELS 95, 96

SIZE
METRIC
USIS
3", 4"
0.7 LIT.
0.2 GAL.
6"
2.6 LIT.
0.7 GAL.
ORDER FORM
The customer is requested to order the valve in the following format, to prevent
possible misunderstandings.
The GREY parts of the order form are mandatory and the factory cannot
accept an order which excludes them.
EXAMPLE
47
ISO PN 16
PR / EL
DIAPHRAGM
NO. 43
MODEL
SPECIAL
BONNET
SIZE
CONNECTION
STANDARD
CONTROL
FUNCTIONS
NON-STANDARD
FEATURES
SEE
PAGE
2 0 0 1
3
10
14
18
19
42
SEE
PAGE
("GAL" MODELS)
(PLASTIC MODELS)
(BACK FLUSHING MODELS)
(RISER VALVE MODELS)
("GALIL")
4"
24"
ISO PN....
ANSI CLASS....
BS 10/....
JIS K....
OTHER
SEE
PAGES
22-26
SPECIAL DIAPHRAGM,
ELECTRIC CURRENT,
COATING,
NON-STANDARD PILOT
ETC.

Catalogue: Automatic Control Valves

Uploaded by

Copyright:

Available Formats

Catalogue: Automatic Control Valves

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogue: Automatic Control Valves

Uploaded by

Copyright:

Available Formats

C ATA L O G U E

AUTOMATIC CONTROL VALVES

The aims of the catalogue are:

Sections A,B,C,D and E include:

MODELS 44, 45, 94

MODELS 47, 67, 77, 87

The direct-sealing diaphragm Valves are operated by pipeline pressure

SIZE & DIAPHRAGM SELECTION GUIDE

MODEL SELECTION TABLE

DUCTILE IRON DUCTILE IRON

* HIGH PRESSURE MODELS (PN 25)

200 L.F. 868

The pressure rating of the "gal" valves is determined by

CAST IRON, CAST BRONZE, DUCTILE IRON

MODELS 82, 84, 91

POSITION INDICATING BONNET

For the reduction of pressure and

* SIZES 6" - 24"

SPECIAL DIAPHRAGM (IF REQUIRED)

FOR CONTROL FUNCTIONS SEE SECTION F.

SIZE SELECTION GUIDE

400 500 600 700 800 900 1000

2 2-WAY ELECTRIC CONTROL

MODEL SELECTION TABLE

* Non - Integral Solenoid

2-WAY ELECTRIC CONTROL-MODEL 75

(BLUE AREA INDICATES RECCONENDED OPERATING RANGE)

6 2-WAY OPTIONAL THROTTLING

8 MANUAL ACTIVATION RING

6 3-WAY OPTIONAL THROTTLING

12 3-WAY CONTROL VALVE ADAPTOR

(THREADED MODELS ONLY) NPT, BSP

FLUSHGAL FILTER BACKFLUSHING CONTROL VALVES

MODEL 58-P (PLASLITE)

Structural simplicity - Easy instalation

For Model 58-P (PLASLITE)

ISO PN 16, ANSI CLASS 125

"FLUSHGAL " FILTER BACKFLUSHING CONTROL VALVES

MODEL SELECTION TABLE

2" (50 mm) FEMALE THREAD

(50 mm) FEMALE THREAD (*2)

2" (50 mm) FEMALE THREAD

(50 mm) FEMALE THREAD (*2)

3" (80 mm) FLANGES

(50 mm) FEMALE THREAD

3" (80 mm) VICTAULIC

(80 mm) VICTAULIC (*3)

4" (100 mm) FLANGES

(80 mm) FEMALE THREAD (*3)

3" (80 mm) VICTAULIC

(50 mm) FEMALE THREAD (*3)

3" (80 mm) VICTAULIC

(80 mm) VICTAULIC (*3)

4" (100 mm) VICTAULIC

(80 mm) FEMALE THREAD (*3)

4" (100 mm) VICTAULIC

4" (100 mm) VICTAULIC

3" (80 mm) VICTAULIC

(50 mm) FEMALE THREAD (*3)