695

Diaphragm Valve,
Metal
Construction
The GEM 695 pneumatically operated 2/2-way diaphragm valve has
a low maintenance membrane actuator which can be controlled by inert
gaseous media. Normally Closed, Normally Open and Double Acting
control functions are available.
Features
Suitable for inert and corrosive* liquid and gaseous media
Insensitive to particulate media
Valve body and diaphragm available in various materials and designs
Surface finishes down to 0.25 m, electropolished
Versions according to ATEX on request
Advantages
Optional flow direction, will seal in either flow direction up to
full operating pressure
Optional mounting position
Weight-saving design
Optional accessories:
- Stroke limiter
- Optical position indicator
- Manual override (GEM 1002, GEM 1004)
- Pilot valve with manual override (GEM 0322 - 0326)
- Electrical position indicator
Sectional drawing
*see information on working medium on page 2
695
2
Technical data
Working medium
Corrosive, inert, gaseous and liquid media which have no
negative impact on the physical and chemical properties of
the body and diaphragm material.
The valve will seal in both flow directions up to full operating
pressure. (All pressures are gauge pressures.)
Max. operating temperature 80 C
(dependent on medium wetted materials)
Kv values [m/h]
MG DN
DIN

Code 0
DIN 11850
Series 1
Code 16
DIN 11850
Series 2
Code 17
DIN 11850
Series 3
Code 18
SMS 3008

Code 37
ASME BPE

Code 59
EN ISO
1127
Code 60
25
15 4.1 4.7 4.7 4.7 - - 7.4
20 6.3 7.0 7.0 7.0 - 4.4 13.2
25 13.9 15.0 15.0 15.0 12.6 12.2 16.2
40
32 25.3 27.0 27.0 27.0 26.2 - 30.0
40 29.3 30.9 30.9 30.9 30.2 29.5 32.8
50 50 46.5 48.4 48.4 48.4 51.7 50.6 55.2
Kv values determined acc. to IEC 534 standard, inlet pressure 6 bar, p 1 bar, stainless steel valve body and soft elastomer diaphragm.
MG = diaphragm size
Filling volume (control function 1)
DN 15-25 0.15 dm
DN 32-40 0.35 dm
DN 50 1.10 dm
Ambient conditions
Max. ambient temperature 60 C
Control medium
Max. perm. temperature of control medium 40 C
Control functions 2 + 3
The values shown relate to control function 2 (with opening spring).
For control function 3 (without opening spring) control pressure is
approx. 1 bar lower.
Operating pressure [bar] Control pressure [bar]
Weight
C.f. 1
Diaphragm size DN EPDM / FPM PTFE
Control
function 1
Control
function 2
Control
function 3
[kg]
25
15
0 - 10 0 - 6 5.5 - 7.0 max. 5.5 max. 5.5
2.3
20 2.4
25 2.7
40
32
0 - 10 0 - 6 5.5 - 7.0 max. 5.5 max. 5.5
5.9
40 6.3
50 50 0 - 10 0 - 6 5.5 - 7.0 max. 5.0 max. 5.0 10.1
All pressures are gauge pressures. Operating pressure values were determined with static operating pressure applied on one side of a closed
valve. Sealing at the valve seat and atmospheric sealing is ensured for the given values.
Information on operating pressures applied on both sides and for high purity media on request.
Operating pressure [bar]
C
o
n
t
r
o
l

p
r
e
s
s
u
r
e

[
b
a
r
]
695
3
Order data
Body confguration Code
2/2-way body D
Valve body material Code
EN-GJL-250, (GG25) (Cast iron) 8
EN-GJS-400-18-LT (S.G. Iron 40.3), PFA lined
17
EN-GJS-400-18-LT (S.G. Iron 40.3), PP lined
18
1.4435 - BN2 (CF3M), investment casting Fe<0.5% 32
1.4435 (ASTM A 351 CF3M 316L), investment casting 34
1.4408, investment casting 37
1.4408, investment casting, PFA lined 39
1.4435 (316L), forged body 40
1.4435 (BN2), forged body Fe<0.5% 42
EN-GJS-400-18-LT (S.G. Iron 40.3),
hard rubber lined 83
Control function Code
Normally closed (NC) 1
Normally open (NO) 2
Double acting (DA) 3
Connection Code
Butt weld spigots
Spigots DIN
Spigots DIN 11850, series 1
Spigots DIN 11850, series 2
Spigots DIN 11850, series 3
Spigots DIN 11866, series A
Spigots DIN 11866, series B
Spigots JIS-G 3447
Spigots JIS-G 3459
Spigots SMS 3008
Spigots BS 4825, Part 1
Spigots ASME BPE
Spigots EN ISO 1127
Spigots ANSI/ASME B36.19M, Schedule 10s
Spigots ANSI/ASME B36.19M, Schedule 40s
0
16
17
18
1A
1B
35
36
37
55
59
60
63
65
Threaded connections
Threaded sockets DIN ISO 228
Threaded spigots DIN 11851
One side threaded spigot, other side
cone spigot and union nut, DIN 11851
Aseptic unions on request
1
6

62
Flanges
Flanges EN 1092 / PN16 / form B,
length EN 558, series 1,
ISO 5752, basic series 1
Flanges ANSI class 125/150 RF,
length MSS SP-88
Flanges ANSI class 125/150 RF,
length EN 558, series 1,
ISO 5752, basic series 1


8

38


39
Clamp connections
Clamps ASME BPE for pipe ASME BPE,
short design
Clamps following ASME BPE for pipe
EN ISO 1127, length EN 558, series 7
Clamps ASME BPE for pipe ASME BPE,
length EN 558, series 7
Clamps DIN 32676 for pipe DIN 11850,
length EN 558, series 7
Clamps SMS 3017 for pipe SMS 3008,
length EN 558, series 7

80

82

88

8A

8E
For overview of available valve bodies for GEM 695 see page 8
Diaphragm material Code
FPM 4
EPDM 12*
EPDM 13*
EPDM 14
EPDM 17*
PTFE/EPDM convex PTFE loose 5E*
PTFE/FPM convex PTFE loose 5F
PTFE/EPDM PTFE lamin. 52*
* Material complies with FDA requirements
The combination of PFA or PTFE lining with 5E diaphragms
is only conditionally suitable for gaseous media.
If low seat leakage rates are required for gaseous media, other
combinations are preferable.
Actuator size Code
Diaphragm size 25 1/N
Diaphragm size 40 2/N
Diaphragm size 50 3/N
Order example 695 25 D 60 34 17 1 1/N 1500
Type 695
Nominal size 25
Body configuration (code) D
Connection (code) 60
Valve body material (code) 34
Diaphragm material (code) 17
Control function (code) 1
Actuator size (code) 1/N
Surface finish (code see page 4) 1500
695
4
B
A
1
A
G
1
/
4
B
A
2
A
1 G
1
/
4
A
G
1
/
4
Actuator dimensions [mm]
Control function 1
MG DN B A A1
25 15 - 25 125 131 47
40 32 - 40 155 177 75
50 50 210 215 90
MG = diaphragm size
Control functions 2 + 3
MG DN B A A1 A2
25 15 - 25 125 98 47 27
40 32 - 40 155 135 75 27
50 50 210 164 90 29
MG = diaphragm size
Valve body surface fnish, internal contour Code
Ra 6.3 m blasted internal/external 1500*
Ra 6.3 m electropolished internal/external 1509*
Ra 0.8 m mechanically polished internal, blasted external 1502
Ra 0.8 m electropolished internal/external 1503
Ra 0.6 m mechanically polished internal, blasted external 1507
Ra 0.6 m electropolished internal/external 1508
Ra 0.4 m mechanically polished internal, blasted external 1536
Ra 0.4 m electropolished internal/external 1537
Ra 0.25 m mechanically polished internal, blasted external 1527
Ra 0.25 m electropolished internal/external 1516
Ra acc. to DIN 4768; at defined reference points * only investment cast design
Surface finish data refer to medium wetted surfaces
Threaded sockets, connection code 1
Valve body material: GG25 (code 8), investment casting (code 37)
Material code 8 Material code 37
MG DN G L H H1 t SW
Number of
flats
H H1 t SW
Number of
flats
25
15 1/2" 85 35 19 12 32 6 30 16 9 27 6
20 3/4" 85 40 19 13 41 6 33 17 10 32 6
25 1" 110 42 19 16 46 6 37 17 13 41 6
40
32 1 1/4" 120 56 28 16 55 6 50 25 16 50 8
40 1 1/2" 140 61 28 18 65 6 52 25 18 55 8
50 50 2" 165 73 35 18 75 6 69 34 18 70 8
For materials see overview on last page MG = diaphragm size
Body dimensions [mm]
695
5
Butt weld spigots, connection code 0, 16, 17, 18, 1A, 1B, 60
Valve body material: Investment casting (code 34), forged body (code 40)
DIN
Series 0
Code 0
DIN 11850
Series 1
Code 16
DIN 11850
Series 2
Code 17
DIN 11850
Series 3
Code 18
DIN 11866
Series A
Code 1A
DIN 11866
Series B
Code 1B
EN ISO
1127
Code 60
MG DN NPS f* g* L LS H1* H1** d s d s d s d s d s d s d s
25
15 1/2 40 13.5 120 25 13.0 19.0 18 1.5 18 1.0 19 1.5 20 2.0 19 1.5 21.3 1.6 21.3 1.6
20 3/4 40 13.5 120 25 16.0 19.0 22 1.5 22 1.0 23 1.5 24 2.0 23 1.5 26.9 1.6 26.9 1.6
25 1 40 13.5 120 25 19.0 19.0 28 1.5 28 1.0 29 1.5 30 2.0 29 1.5 33.7 2.0 33.7 2.0
40
32 11/4 68 13.5 153 25 24.0 26.0 34 1.5 34 1.0 35 1.5 36 2.0 35 1.5 42.4 2.0 42.4 2.0
40 11/2 75 13.5 153 25 26.0 26.0 40 1.5 40 1.0 41 1.5 42 2.0 41 1.5 48.3 2.0 48.3 2.0
50 50 2 90 13.5 173 30 32.0 32.0 52 1.5 52 1.0 53 1.5 54 2.0 53 1.5 60.3 2.0 60.3 2.0
* only for investment cast design ** only for forged design MG = diaphragm size
For materials see overview on last page
Butt weld spigots, connection code 35, 36, 37, 55, 59, 63, 65
Valve body material: Investment casting (code 34), forged body (code 40)
JIS-G
3447
Code 35
JIS-G
3459
Code 36
SMS
3008
Code 37
BS 4825
Code 55
ASME BPE
Code 59
ANSI/ASME
B36.19M 10s
Code 63
ANSI/ASME
B36.19M 40s
Code 65
MG DN NPS f* g* L LS H1* H1** d s d s d s d s d s d s d s
25
15 1/2 40 13.5 120 25 13.0 19.0 - - 21.7 2.10 - - - - - - 21.3 2.11 21.3 2.77
20 3/4 40 13.5 120 25 16.0 19.0 - - 27.2 2.10 - - 19.05 1.2 19.05 1.65 26.7 2.11 26.7 2.87
25 1 40 13.5 120 25 19.0 19.0 25.4 1.2 34.0 2.80 25.0 1.2 - - 25.40 1.65 33.4 2.77 33.4 3.38
40
32 11/4 68 13.5 153 25 24.0 26.0 31.8 1.2 42.7 2.80 33.7 1.2 - - - - 42.2 2.77 42.2 3.56
40 11/2 75 13.5 153 25 26.0 26.0 38.1 1.2 48.6 2.80 38.0 1.2 - - 38.10 1.65 48.3 2.77 48.3 3.68
50 50 2 90 13.5 173 30 32.0 32.0 50.8 1.5 60.5 2.80 51.0 1.2 - - 50.80 1.65 60.3 2.77 60.3 3.91
* only for investment cast design ** only for forged design MG = diaphragm size
For materials see overview on last page
Body dimensions [mm]
6
695
L
k
H
1
D
FTF
Flanges - DIN EN 1092-2, connection code 8
Valve body material: GG25 (code 8), S.G. Iron 40.3 (code 17, 18, 83),
1.4435 (code 34, 40), 1.4408 (code 39)
H1
FTF
MG DN D k L
Number
of bolt
Material
code 8
Material code
17, 18, 39, 83
Material
code 34
Material
code 40
25
15 95 65 14 4 19.0 18.0 13.0 19.0 130*
20 105 75 14 4 19.0 20.5 16.0 19.0 150
25 115 85 14 4 19.0 23.0 19.0 19.0 160
40
32 140 100 18 4 28.0 28.7 24.0 26.0 180
40 150 110 18 4 28.0 33.0 26.0 26.0 200
50 50 165 125 18 4 35.0 39.0 32.0 32.0 230
*Material code 34 L = 150 (no DIN length) For materials see overview on last page MG = diaphragm size
Flanges - ANSI B 16.5, connection code 38, 39
Valve body material: GG25 (code 8), S.G. Iron 40.3 (code 17, 18, 83),
1.4435 (code 34, 40), 1.4408 (code 39)
H1 FTF
Connection code 38, 39
MSS Sp-88
Connection
code 38
EN 558
Series 1
Connection
code 39
MG DN D k L
Number
of bolt
Material
code 8
Material
code
17, 18, 39, 83
Material
code 34
Material
code 40
Material
code
Material
code
8, 17, 18, 34, 39, 40, 83
25
15 88.9 60.5 15.7 4 19.0 18.0 13.0 19.0 - - 130
20 98.6 69.9 15.7 4 19.0 20.5 16.0 19.0 146 146.4 150
25 108.0 79.2 15.7 4 19.0 23.0 19.0 19.0 146 146.4 160
40
32 117.3 88.9 15.7 4 28.0 28.7 24.0 26.0 - - 180
40 127.0 98.6 15.7 4 28.0 33.0 26.0 26.0 175 171.4 200
50 50 152.4 120.7 19.1 4 35.0 39.0 32.0 32.0 200 197.4 230
For materials see overview on last page MG = diaphragm size
17, 18, 39 83
Body dimensions [mm]
7
695
Code 6 Code 62
Threaded connections, connection code 6, 62
Valve body material: investment casting (code 34), forged body (code 40)
Diaphragm
size
DN H1* H1** f* g* d1*
Thread to DIN 405
G
Code 6
L
Code 62
L
25
15 13
19 40 13.5
16 Rd 34 x 1/8 118 116
20 16 20 Rd 44 x 1/6 118 114
25 19 26 Rd 52 x 1/6 128 127
40
32 24
26
68
13.5
32 Rd 58 x 1/6 147 147
40 26 75 38 Rd 65 x 1/6 160 160
50 50 32 32 90 13.5 50 Rd 78 x 1/6 191 191
* only for investment cast design ** only for forged design For materials see overview on last page
Clamp connections, connection code 80, 82, 88, 8A, 8E
Valve body material: forged body (code 40)
for pipe ASME BPE
Code 80
for pipe EN ISO 1127
Code 82
for pipe ASME BPE
Code 88
for pipe DIN 11850
Code 8A
for pipe SMS 3008
Code 8E
MG DN NPS H1 d1 d3 L d1 d3 L d1 d3 L d1 d3 L d1 d3 L
25
15 1/2" 19.0 9.40 25.0 101.6 18.10 50.5 108.0 9.40 25.0 108 16 34.0 108.0 - - -
20 3/4" 19.0 15.75 25.0 101.6 23.70 50.5 117.0 15.75 25.0 117 20 34.0 117.0 - - -
25 1" 19.0 22.10 50.5 114.3 29.70 50.5 127.0 22.10 50.5 127 26 50.5 127.0 22.60 50.5 127
40
32 1 1/4" 26.0 - - - 38.40 64.0 146.0 - - - 32 50.5 146.0 31.30 50.5 146
40 1 1/2" 26.0 34.80 50.5 139.7 44.30 64.0 159.0 34.80 50.5 159 38 50.5 159.0 35.60 50.5 159
50 50 2" 32.0 47.50 64.0 158.8 56.30 77.5 190.0 47.50 64.0 190 50 64.0 190.0 48.60 64.0 190
MG = diaphragm size
Body dimensions [mm]
For further metal diaphragm valves, accessories and other products, please see our Product Range catalogue and Price List.
Contact GEM.
S
u
b
j
e
c
t

t
o

a
l
t
e
r
a
t
i
o
n

0
1
/
2
0
1
0

8
8
0
4
8
7
6
8

T
e
c
h
n
i
c
a
l

d
a
t
a

s
h
e
e
t
Overview of valve bodies for GEM 695
Clamps Flanges
Connection
code
80 82 88 8A 8E 8 38 39
Material
code
40 40 40 40 40 8 17 18 34 39 40 83 17 18 39 83 8 17 18 34 39 40 83
MG DN
25
15 - W - K - X* X X W X W X - - - - X* X X W X W X*
20 K K K K - X* X X W X W X X X X X* X* X X W X W X*
25 K K K K K X* X X W X W X X X X X* X* X X W X W X*
40
32 - W - K K X* X X W X W X - - - - X* X X W X W X*
40 K W K K K X* X X W X W X X X X X* X* X X W X W X*
50 50 K W K K K X* X X W X W X X X X X* X* X X W X W X*
*Valve bodies are not suitable for use with diaphragm code 5E, 5F
X Standard
K Connections completely machined (not welded) in material code 40
W Welded construction
S
h
o
u
l
d

t
h
e
r
e

b
e

a
n
y

d
o
u
b
t
s

o
r

m
i
s
u
n
d
e
r
s
t
a
n
d
i
n
g
s
,

t
h
e

G
e
r
m
a
n
v
e
r
s
i
o
n

o
f

t
h
i
s

d
a
t
a

s
h
e
e
t

i
s

t
h
e

a
u
t
h
o
r
i
t
a
t
i
v
e

d
o
c
u
m
e
n
t
!
vALvES, MEASUREMENT
AND CONTROL SYSTEMS
GEM Gebr. Mller Apparatebau GmbH & Co. KG Fritz-Mller-Str. 6-8 D-74653 Ingelfingen-Criesbach Tel. +49(0) 7940/123-0 Telefax +49(0) 7940/123-224
info@gemue.de www.gemue.de
Threaded connections Spigots
Connection
code
1 6 62 0 16 17 18 1A 1B 35 36 37 55 59 60 63 65
Material
code
8 37 34 40 34 40 34 40 34 40 34 40 34 40 40 40 34 40 40 34 40 34 40 34 40 34 40 40 40
MG DN
25
15 X* X W W W W X X X X X X - X X X - - X - - - - - - X X X X
20 X* X W W W W X X X X X X - X X X - - X - - X X X X X X X X
25 X* X W W W W X X X X X X X X X X X X X X X - - X X X X X X
40
32 X* X W W W W X X X X X X X X X X X X X X X - - - - X X X X
40 X* X W W W W X X X X X X X X X X X X X X X - - X X X X X X
50 50 X* X W W W W X X X X X X X X X X X X X X X - - X X X X X X
*Valve bodies are not suitable for use with diaphragm code 5E, 5F
X Standard
W Welded construction