Physical Layer: Sasasaasas
Physical Layer: Sasasaasas
Physical Layer: Sasasaasas
sasasaasas
In UTRA
the
Physical layer
support
Transport channels
may
by Transport
Format Indicator (TFI)
TFI
indicates the local UMTS air
interface transport format to
be used for the transmission
time interval aaaaassssaa
Physical layer
combines TFI information from
different transport channels to
Transport Format Combination
Indicator (TFCI)
TFCI
transmitted in physical control
channel to inform the receiver
which transport channels are
active for the current frame
decoded in the receiver and the
resulting TFI is given to higher
layers for each of the transport
channels that can be active for
the connectionssaaaaaaaaa
Figure 6.1
two
CCTrCh consists of
one
channels
common channels
Dedicated channel
a
Common channel
a
carries
data
such as speech frames
higher layer control information
such as handover commands or measurement
reports from the terminal
power control
fast data rate change on a frame-by-frame basis
the possibility of transmission to a certain part of the
cell or sector
Common channels
do
the
Uplink transmission
CPCH
power control
variable bit rate on a frame-by-frame basis
DSCH
does
and CPCH
Different transport
channels are mapped to
different physical
channels
though
some of the
transport channels are
carried by identical (or
even the same) physical
channel
these