Tool Holder

Profitable and time-saving
Quick-change toolholder system HT11

An ingenious system –
right down to the smallest detail
Convenient replacement, fast servicing

With the quick-change toolholder system HT11, The machine, milling drum, cutting tools and toolholders
Wirtgen has engineered a field-proven solution for form a perfectly integrated system designed with much
road milling machines and recyclers, making the operation attention to detail. It is extremely durable, which also results
and servicing of the machines even more convenient, fast, in reduced operating costs.
and thus even more profitable.
A series of application-related
advantages
Wear markers at 5 mm
intervals for improved
monitoring
Upper part covers bottom part

completely to minimize defor-
mation of contact surface
Optimized shaft angle Chip breaking web for

Protective plug prevents geometry for greater additional crushing of
soiling of bolt head component strength milled material
Strong retaining bolt Contact surface increased

prevents unwanted by 75% for improved
loosening of upper part durability of bottom part
Conical pressure stud Seal to allow simple

for reliable transmission and quick insertion/
of clamping force removal of upper part
The contact surface of the upper part has been increased in The retaining bolt has been significantly increased in size
size to cover the bottom part completely, thus ensuring an when compared to the quick-change toolholder system type
absolutely even and tight fit which minimizes deformation HT3. A hexagon drive of 17 mm, which reliably transmits the
and soiling of the contact surface. required tightening torque of 500 Nm, is now used in
conjunction with an external thread M 30 x 2. The conical
A seal prevents dirt particles from entering the gap between pressure stud minimizes any unwanted loosening of the
upper part and bottom part during the milling operation. upper part.
Upper part HT11-R
for improved tool rotation
Milled recess at the back

of the upper part
The milled recess ensures

that fine particles of milled
material are flushed from
the drill hole immediately
Jamming of the cutting

tool in the drill hole is
largely prevented
Additional cooling of
the cutting tools by means
of a direct water spray
system
Optimized application
with the Wirtgen extractor
tools
Optimum rotation of the cutting tools is often impaired The Wirtgen machines are fitted with spray bars ensur-
by material soiling the toolholder’s drill hole. With the ing that the mixture of water and air is sprayed into the
upper part type HT11-R, the fine particles of milled toolholder drill holes even more efficiently. Improved
material are flushed from the drill hole via a recess at cooling of the cutting tools is thus ensured. Optimized
the back of the upper part. Jamming of the cutting tool access using the Wirtgen extractor tools ensures addi-
in the drill hole is largely prevented. tional convenience for the machine operator.
3 // 4
Field-proven components
Dummy upper part to

Upper part Upper part Upper part protect bottom part in
HT11 for tool shaft HT11 for tool shaft HT11-R for tool shaft case of modified tool
diameter 20 mm diameter 22 mm diameter 20 mm arrangement
The large, robust retaining bolt HT11 The seal prevents fine asphalt
The protective plug protects the is capable of withstanding tremen- particles from entering the gap
retaining bolt head against dirt dous tension forces between upper and bottom part
All components of the quick-change toolholder It requires only a small number of components to
system HT11 are designed for robust use on the equip a large variety of different milling drums of
job site, simple handling and reliable servicing. the Wirtgen road milling machines and recyclers.
The system combination of wear-resistant compo- The larger retaining bolts reliably transmit the
nents improves the service life of the entire milling tightening torque of 500 Nm.
drum.
2 // 5
Wirtgen GmbH
Hohner Straße 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131-242
Internet: www.wirtgen.com · E-Mail: info@wirtgen.com
Illustrations are without obligation. Subject to technical changes.

Performance data depend on operational conditions. No. 40-12 EN-09/06 © by Wirtgen GmbH 2006. Printed in Germany

Tool Holder

Uploaded by

Copyright:

Available Formats

Tool Holder

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tool Holder

Uploaded by

Copyright:

Available Formats

Profitable and time-saving

Quick-change toolholder system HT11

Convenient replacement, fast servicing

Upper part covers bottom part

Optimized shaft angle Chip breaking web for

Strong retaining bolt Contact surface increased

Conical pressure stud Seal to allow simple

Milled recess at the back

The milled recess ensures

Jamming of the cutting

Dummy upper part to

Illustrations are without obligation. Subject to technical changes.

You might also like