Quick Guide

Quick Installation Guide
SXC-1080
CDMA 1x USB MODEM
Parts of the USB Modem

Rear view
Installation Guide
* Note: If Auto-Run did not start, double click TATA_GATA_SXC1080.exe on your CD-Rom Drive to start the installation. 3. Clicking User Manual or Quick Guide & T rouble Shooting icon in the first screen will prompt you to Open or Save the Manual. Click Open to see the Manual or click SAVE to save the Manual into your PC. 4. When the InstallShield wizard window appear, click the N e x t to continue for the next step.
Front view
USB Cap LED Indicator
USB Connector
This is a Quick Guide for installation. Please refer to the User Manual provided in the Installer CD for a more detailed installation guide with diagrams. The installation procedures of the SXC-1080 Dialer Client may be somewhat different under different operating systems. Please refer to the actual installing tips if the installing description is different from the following.
WARNING: Do not connect SXC-1080 USB modem to your laptop/PC yet. R-UIM Socket
Installing Dialer Client 1. Insert Installer C D into the CD-ROM drive. 2. When the first screen appears, click the Installation icon to start the installation wizard.
* Color of Product: Dark Blue
5. Default installation directory is C:\Program Files\Epivalley\ TATA Indicom Dialer. which can be changed by clicking on Change button. 6. When the next screen appears, the program is ready to be installed, click the Install button to begin installation. 7. A window will appear to indicate that InstallShield Wizard completed is completed. Click Finish to exit the wizard.
Note: Since Driver is to be installed automatically, please do not unplug the USB modem from the PC while driver installation. Installation time for completion can be different up to user's PC spec.
Special note
1. Disconnect the DATA call before shutting down the Laptop / Desktop PC or plugging out the modem. 2. Do not plug out the modem when the Data call is in progress, for a safe practice.
Troubleshooting
Start > Control Panel > System > Hardware > Device Manager to check whether USB Modem is in it. If Modem is not in the list, remove USB Modem from PC and reconnect after one minute. 4. The message Invalid M odem P ort, Reinstall d river is displayed on the Dialer Client.
] The PC recognizes USB Modem as a
1. The message Modem d river n ot installed. I nstall d river a nd r estart program is displayed on the Dialer Client.
] Dialer Client is not installed properly,
Modem Port continues to appear, please re-install Dialer Client after removing the previous program. 5. Do not remove an R-UIM Card while USB Modem is in use.
] This may harm the PC and Modem. Please
UIM card has been inserted for more than five times. Please contact service provider to unlock. 8. When the message MIN o ut o f range is displayed,
] Please enter valid MIN.
Reinstall Dialer Client. 2. There is no Antenna indicator on the Dialer Client and no s vc is displayed and the LED of USB Modem is in red.
] Modem Number is registered incorrectly.
use the Safely Remove Hardware command to disconnect the USB Modem first or remove the UIM Card after the PC is shut down. 6. When MIN_LOCK message is displayed,
] This message occurred when invalid R-
9. The message Connect appears even after connecting the Internet.

] Do not click Connect again. It is
Please contact service provider for more information. 3. The message Modem u nplugged. P lug modem is displayed on the Dialer Client.
] USB Modem is not connected to PC. If
connected, separate USB Modem from PC, and reconnect one minute after. Next, go to
different system. Remove USB Modem from PC, and reconnect after one minute. Next, go to Start > Control Panel > System > Hardware > Device Manager to check whether USB Modem is in it. If Modem is not in the list, remove USB Modem from PC, and reconnect after one minute. If the Message Invalid
necessary to take time to connect to the Internet using the Dial-up network. 10. If you fail to input correct pin number, please contact service provider. 11. For software upgrade and customer support, please visit at www.sitsvc.com ED : 02 ED: 0 1
UIM card has been inserted.Please ensure that a valid R-UIM card is inserted. 7. When PHONE_LOCK message is displayed,
] This message occurred when invalid R-
* Speed mentioned is subject to Network conditions.

Quick Guide

Uploaded by

Copyright:

Available Formats

Quick Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Quick Guide

Uploaded by

Copyright:

Available Formats

Quick Installation Guide

Parts of the USB Modem

USB Cap LED Indicator

* Color of Product: Dark Blue

9. The message Connect appears even after connecting the Internet.

* Speed mentioned is subject to Network conditions.

You might also like