6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)

MOC8101 MOC8105 CNY17F-1

FEATURES
The MOC810X and CNY17F-X devices consist of a gallium arsenide LED optically coupled to a silicon phototransistor in a dual-in-line package. Closely Matched Current Transfer Ratio (CTR) Minimizes Unit-to-Unit Variation Narrow (CTR) Windows that Translate to a Narrow and Predictable Open Loop Gain Window Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for Minimum Noise Susceptibility To order devices that are tested and marked per VDE 0884 requirements, the suffix .300 must be included at the end of part number. e.g. MOC8101.300 VDE 0884 is a test option.

MOC8102 MOC8106 CNY17F-2

MOC8103 MOC8107 CNY17F-3

MOC8104 MOC8108 CNY17F-4

6 1

6 1

APPLICATIONS
Switchmode Power Supplies (Feedback Control) AC Line/Digital Logic Isolation Interfacing and coupling systems of different potentials and impedances

ABSOLUTE MAXIMUM RATINGS

Parameter INPUT LED Forward Current - Continuous Forward Current - Peak (PW = 1s, 300pps) Reverse Voltage LED Power Dissipation @ TA = 25C Derate above 25C OUTPUT TRANSISTOR Collector-Emitter Voltage MOC8106/7/8, CNY17F-1/2/3/4 MOC8101/2/3/4/5 Emitter-Collector Voltage Detector Power Dissipation @ TA = 25C Derate above 25C TOTAL DEVICE Input-Output Isolation Voltage(1) (f = 60 Hz, t = 1 min.) Total Device Power Dissipation @ TA = 25C Derate above 25C Ambient Operating Temperature Range Storage Temperature Range Lead Soldering Temperature (1/16 from case, 10 sec. duration) NOTE

(TA =25C Unless otherwise specified) Symbol IF IF(pk) VR PD Value 100 1 6 140 1.33 Unit
1

SCHEMATIC

NC

mA A Volts mW mW/C
PIN 1. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR 6. NO CONNECTION 3 NC 4 2 5

VCEO

70 30 7 200 2.67

Volts

VECO PD

Volts mW mW/C Vac(rms) mW mW/C C C C

VISO PD TOPR TSTG TSOL

5300 260 2.94 -55 to +100 -55 to +150 260

1. Input-Output Isolation Voltage,VISO, is an internal device dielectric breakdown rating.

2001 Fairchild Semiconductor Corporation DS300266 9/18/01

1 OF 10

www.fairchildsemi.com

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

ELECTRICAL CHARACTERISTICS
Characteristic INPUT LED Forward Voltage (IF = 60 mA) Reverse Leakage Current (VR = 5.0 V) Capacitance OUTPUT TRANSISTOR Collector-Emitter Dark Current Collector-Emitter Breakdown Voltage MOC8101/2/3/4/5 MOC8106/7/8, CNY17F-1/2/3/4 Emitter-Collector Breakdown Voltage Collector-Emitter Capacitance COUPLED

(TA =25C Unless otherwise specified)(1) Symbol VF IR C Min 1.0 30 70 V(BR) ECO CCE 7.0 50 73 108 160 65 (CTR)(2) 50 100 250 40 63 100 160 VCE(sat) VISO RISO CISO 5300 1011 Typ** 1.4 0.001 18 1.0 1.0 100 100 10 8 0.5 Max 1.65 10 50 80 117 173 256 133 150 300 600 80 125 200 320 0.4 pF V Vac(rms) % V pF Unit V A pF nA A V

(VCE = 10 V, TA = 25C) (VCE = 10 V, TA = 100C) (IC = 1.0 mA) (IC = 1.0 mA) (IE = 100 A) (f = 1.0 MHz, VCE = 0) MOC8101 MOC8102 MOC8103 MOC8104 MOC8105 MOC8106 MOC8107 MOC8108 CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4

ICEO1 ICEO2 V(BR) CEO

Output Collector Current (IF = 10 mA, VCE = 10 V)

(IF = 10 mA, VCE = 5 V)

Collector-Emitter Saturation Voltage CNY17F-1/2/3/4 MOC8101/2/3/4/5/6/7/8 Isolation Voltage Isolation Resistance Isolation Capacitance ** All typicals at TA = 25C (IC = 2.5 mA, IF = 10 mA) (IC = 500 A, IF = 5.0 mA) (f = 60 Hz, t = 1.0 min.)(4) (VI-O = 500 V)(4) (VI-O = 0, f = 1.0 MHz)(4)

www.fairchildsemi.com

2 OF 10

9/18/01

DS300266

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

TRANSFER CHARACTERISTICS
AC Characteristic NON-SATURATED SWITCHING TIME Turn-on Time Turn-off Time Turn-On Time All Devices Turn-Off Time All Devices Rise Time All Devices Fall Time All Devices Turn-on Time CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4 Rise Time CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4 Turn-off Time CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4 Fall Time CNY17F-1 CNY17F-2 CNY17F-3 CNY17F-4 ** All typicals at TA = 25C CNY17F-1/2/3/4 Only CNY17F-1/2/3/4 Only

(TA =25C Unless otherwise specified) Test Conditions (RL = 100 , IC = 2 mA) (VCC = 10 V) )(3) )(3) )(3) )(3) Symbol ton toff ton toff tr tf Min Typ** 2 3 2 3 1 2 Max 10 10 s s Unit s

(IC = 2.0 mA, VCC = 10 V, RL = 100 (IC = 2.0 mA, VCC = 10 V, RL = 100 (IC = 2.0 mA, VCC = 10 V, RL = 100 (IC = 2.0 mA, VCC = 10 V, RL = 100

SATURATED SWITCHING TIMES (IF = 20 mA, VCE = 0.4 V) ton (IF = 10 mA, VCE = 0.4 V) 8.0 5.5 s

(IF = 20 mA, VCE = 0.4 V) tr (IF = 10 mA, VCE = 0.4 V)

4.0 s

6.0

(IF = 20 mA, VCE = 0.4 V) toff (IF = 10 mA, VCE = 0.4 V)

34 s

39

(IF = 20 mA, VCE = 0.4 V) tf (IF = 10 mA, VCE = 0.4 V)

20 s

24

NOTES: 1. Always design to the specified minimum/maximum electrical limits (where applicable). 2. Current Transfer Ratio (CTR) = IC/IF x 100%. 3. For test circuit setup and waveforms, refer to Figure 7. 4, For this test, Pins 1 and 2 are common, and Pins 4 are 5 are common.

DS300266

9/18/01

3 OF 10

www.fairchildsemi.com

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

TYPICAL PERFORMANCE CURVES

Fig. 1 LED Forward Voltage vs. Forward Current
1.8 1.4 TA = 25C VCE = 5.0 V 1.2 Normalized to IF = 10 mA

Fig. 2 Normalized CTR vs. Forward Current

1.7

VF - FORWARD VOLTAGE (V)

1.6 1.0 1.5 TA = 55C 1.4

NORMALIZED CTR
100

0.8

0.6

1.3

1.2 TA = 25C 1.1 TA = 100C 1.0 1 10

0.4

0.2

0.0 0 5 10 15 20

IF - LED FORWARD CURRENT (mA)

IF - FORWARD CURRENT (mA)

Fig. 3 Normalized CTR vs. Ambient Temperature

1.6 1.0 0.9 1.4 IF = 5 mA 0.8

Fig. 4 CTR vs. RBE (Saturated)

NORMALIZED CTR

NORMALIZED CTR

1.2 IF = 10 mA 1.0

0.7 0.6 0.5 0.4 0.3

IF = 20 mA

IF = 10 mA

0.8 IF = 20 mA 0.6 Normalized to IF = 10 mA TA = 25C -50 -25 0 25 50 75

o

IF = 5 mA 0.2 0.1 0.0 100 125 10 100 1000 TA = 25C VCE = 0.3 V Normalized to CTR @ RBE = Open

0.4 -75

TA - AMBIENT TEMPERATURE (C)

RBE - BASE RESISTANCE (k)

www.fairchildsemi.com

4 OF 10

9/18/01

DS300266

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

Fig. 5 CTR vs. RBE (Unsaturated)

1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 10 100 1000 IF = 5 mA IF = 10 mA IF = 20 mA

VCE (sat) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)

Fig. 6 Collector Emitter Saturation Voltage vs Collector Current

100

10

NORMALIZED CTR

1 IF = 2.5 mA 0.1

TA = 25C VCE = 5.0 V Normalized to CTR @ RBE = Open

0.01 IF = 5 mA TA = 25C 0.001 0.01 0.1 1 IF = 10 mA

IF = 20 mA

10

RBE - BASE RESISTANCE (k)

IC - COLLECTOR CURRENT (mA)

Fig. 7 Normalized ton vs. RBE

6.0 5.5 5.0 4.5 1.4 1.3 1.2 1.1 1.0

Fig. 8 Normalized toff vs. RBE

VCC = 10 V IC = 2 mA RL = 100 Normalized to toff@ RBE = Open

NORMALIZED ton

NORMALIZED toff
VCC = 10 V IC = 2 mA RL = 100 Normalized to ton@ RBE = Open 10 100 1000 10000

4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0

0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 10 100 1000 10000

RBE - BASE RESISTANCE (k)

RBE - BASE RESISTANCE (k)

DS300266

9/18/01

5 OF 10

www.fairchildsemi.com

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

Fig. 9 Switching Speed vs. Load Resistor

1000 IF = 10 mA VCC = 10 V TA = 25C 1e+1

Fig. 10 Dark current vs. Ambient Temperature.

ICEO - COLLECTOR-EMITTER DARK CURRENT (A)

1e+0

VCE = 10V

SWITCHING SPEED - (s)

100

1e-1

Toff Tf 10

1e-2

1e-3

Ton 1 Tr

1e-4

1e-5

0.1 0.1 1 10 100

1e-6 0 25 50 75 100 125

R-LOAD RESISTOR (k)

TA - AMBIENT TEMPERATURE (C)

www.fairchildsemi.com

6 OF 10

9/18/01

DS300266

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

Figure 7. Switching Time Test Circuit and Waveforms

TEST CIRCUIT
VCC = 10V

WAVE FORMS

INPUT PULSE

IF INPUT

IC

RL = 100
10% 90% tr ton tf toff OUTPUT PULSE

OUTPUT

Adjust IF to produce IC = 2 mA

DS300266

9/18/01

7 OF 10

www.fairchildsemi.com

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

Package Dimensions (Through Hole)

PIN 1 ID.

Package Dimensions (Surface Mount)

0.350 (8.89) 0.330 (8.38)

3 0.270 (6.86) 0.240 (6.10)

PIN 1 ID.

0.270 (6.86) 0.240 (6.10)

SEATING PLANE

0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14)

0.070 (1.78) 0.045 (1.14)

0.300 (7.62) TYP

0.200 (5.08) 0.135 (3.43)

0.200 (5.08) 0.165 (4.18) 0.020 (0.51) MIN 0.016 (0.40) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0.300 (7.62) TYP 0.020 (0.51) MIN 0.100 (2.54) TYP

0.016 (0.41) 0.008 (0.20)

0.154 (3.90) 0.100 (2.54)

0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX

0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP

0 to 15

Lead Coplanarity : 0.004 (0.10) MAX

Package Dimensions (0.4Lead Spacing)

Recommended Pad Layout for Surface Mount Leadform

0.270 (6.86) 0.240 (6.10)

0.070 (1.78)

0.060 (1.52)

0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14)

0.415 (10.54)

0.100 (2.54) 0.030 (0.76)

SEATING PLANE

0.295 (7.49)

0.200 (5.08) 0.135 (3.43)

0.154 (3.90) 0.100 (2.54)

0.004 (0.10) MIN

0.016 (0.40) 0.008 (0.20)

0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP

0 to 15 0.400 (10.16) TYP

NOTE All dimensions are in inches (millimeters)

www.fairchildsemi.com

8 OF 10

9/18/01

DS300266

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1
ORDERING INFORMATION
Option
S SD W 300 300W 3S 3SD

MOC8102 MOC8106 CNY17F-2

MOC8103 MOC8107 CNY17F-3

MOC8104 MOC8108 CNY17F-4

Order Entry Identifier

.S .SD .W .300 .300W .3S .3SD

Description
Surface Mount Lead Bend Surface Mount; Tape and reel 0.4 Lead Spacing VDE 0884 VDE 0884, 0.4 Lead Spacing VDE 0884, Surface Mount VDE 0884, Surface Mount, Tape & Reel

QT Carrier Tape Specifications (D Taping Orientation)

12.0 0.1 4.85 0.20 4.0 0.1 0.30 0.05 4.0 0.1 1.55 0.05 1.75 0.10

7.5 0.1 13.2 0.2 16.0 0.3 9.55 0.20

0.1 MAX

10.30 0.20

1.6 0.1

User Direction of Feed

NOTE All dimensions are in inches (millimeters)

DS300266

9/18/01

9 OF 10

www.fairchildsemi.com

6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION)
MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4

DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

www.fairchildsemi.com

10 OF 10

9/18/01

DS300266

This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.