Socio-technical Systems

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 1

Objectives


To explain what a socio-technical system is and the distinction between this and a computer-based system To introduce the concept of emergent system properties such as reliability and security To explain system engineering and system procurement processes To explain why the organisational context of a system affects its design and use To discuss legacy systems and why these are critical to many businesses

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 2

Topics covered
   

Emergent system properties Systems engineering Organizations, people and computer systems Legacy systems

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 3

What is a system?


A purposeful collection of inter-related components working together to achieve some common objective. A system may include software, mechanical, electrical and electronic hardware and be operated by people. System components are dependent on other system components The properties and behaviour of system components are inextricably inter-mingled

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 4

System categories


Technical computer-based systems

Systems that include hardware and software but where the operators and operational processes are not normally considered to be part of the system. The system is not self-aware. Systems that include technical systems but also operational processes and people who use and interact with the technical system. Socio-technical systems are governed by organisational policies and rules.

Socio-technical systems

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 5

Socio-technical system characteristics



Emergent properties
Properties of the system of a whole that depend on the system components and their relationships. They do not always produce the same output when presented with the same input because the systemss behaviour is partially dependent on human operators. The extent to which the system supports organisational objectives does not just depend on the system itself.

Non-deterministic

Complex relationships with organisational objectives

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 6

Emergent properties


Properties of the system as a whole rather than properties that can be derived from the properties of components of a system Emergent properties are a consequence of the relationships between system components They can therefore only be assessed and measured once the components have been integrated into a system

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 7

Examples of emergent properties

Property Volume Reliability Security Description The volume of a system (the total space occupied) varies depending on how the component assemblies are arranged and connected. System reliability depends on component reliability but unexpected interactions can cause new types of failure and therefore affect the reliability of the system. The security of the system (its ability to resist attack) is a complex property that cannot be easily measured. Attacks may be devised that were not anticipated by the system designers and so may defeat built-in safeguards. This property reflects how easy it is to fix a problem with the system once it has been discovered. It depends on being able to diagnose the problem, access the components that are faulty and modify or replace these components. This property reflects how easy it is to use the system. It depends on the technical system components, its operators and its operating environment.

Repairability

Usability

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 8

Types of emergent property



Functional properties
These appear when all the parts of a system work together to achieve some objective. For example, a bicycle has the functional property of being a transportation device once it has been assembled from its components.

Non-functional emergent properties

Examples are reliability, performance, safety, and security. These relate to the behaviour of the system in its operational environment. They are often critical for computer-based systems as failure to achieve some minimal defined level in these properties may make the system unusable.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 9

System reliability engineering



Because of component inter-dependencies, faults can be propagated through the system. System failures often occur because of unforeseen inter-relationships between components. It is probably impossible to anticipate all possible component relationships. Software reliability measures may give a false picture of the system reliability.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 10

Influences on reliability


Hardware reliability
What is the probability of a hardware component failing and how long does it take to repair that component?

Software reliability
How likely is it that a software component will produce an incorrect output. Software failure is usually distinct from hardware failure in that software does not wear out.

Operator reliability
How likely is it that the operator of a system will make an error?

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 11

Reliability relationships


Hardware failure can generate spurious signals that are outside the range of inputs expected by the software. Software errors can cause alarms to be activated which cause operator stress and lead to operator errors. The environment in which a system is installed can affect its reliability.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 12

The shall-not properties



Properties such as performance and reliability can be measured. However, some properties are properties that the system should not exhibit
Safety - the system should not behave in an unsafe way; Security - the system should not permit unauthorised use.

Measuring or assessing these properties is very hard.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 13

Systems engineering


Specifying, designing, implementing, validating, deploying and maintaining socio-technical systems. Concerned with the services provided by the system, constraints on its construction and operation and the ways in which it is used.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 14

The system engineering process



Usually follows a waterfall model because of the need for parallel development of different parts of the system
Little scope for iteration between phases because hardware changes are very expensive. Software may have to compensate for hardware problems.

Inevitably involves engineers from different disciplines who must work together
Much scope for misunderstanding here. Different disciplines use a different vocabulary and much negotiation is required. Engineers may have personal agendas to fulfil.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 15

The systems engineering process

Requirements definition System design Sub-system development System integration System installation System decommissioning System evolution

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 16

Inter-disciplinary involvement
Software engineering Electronic engineering Mechanical engineering

Structural engineering

ATC systems engineering

User interface design

Civil engineering

Electrical engineering

Architecture

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 17

System requirements definition



Three types of requirement defined at this stage

Abstract functional requirements. System functions are defined in an abstract way; System properties. Non-functional requirements for the system in general are defined; Undesirable characteristics. Unacceptable system behaviour is specified.

Should also define overall organisational objectives for the system.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 18

System objectives


Should define why a system is being procured for a particular environment. Functional objectives
To provide a fire and intruder alarm system for the building which will provide internal and external warning of fire or unauthorized intrusion. To ensure that the normal functioning of work carried out in the building is not seriously disrupted by events such as fire and unauthorized intrusion.

Organisational objectives

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 19

System requirements problems



Complex systems are usually developed to address wicked problems

Problems that are not fully understood; Changing as the system is being specified.

Must anticipate hardware/communications developments over the lifetime of the system. Hard to define non-functional requirements (particularly) without knowing the component structure of the system.
Software Engineering, 7th edition. Chapter 2 Slide 20

Ian Sommerville 2004

The system design process



Partition requirements
Organise requirements into related groups. Identify a set of sub-systems which collectively can meet the system requirements. Causes particular problems when COTS are integrated.

Identify sub-systems

Assign requirements to sub-systems

 

Specify sub-system functionality. Define sub-system interfaces

Critical activity for parallel sub-system development.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 21

The system design process

Partition requirements

Define sub-system interfaces

Identify sub-systems

Specify sub-system functionality

Assign requirements to sub-systems

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 22

System design problems



Requirements partitioning to hardware, software and human components may involve a lot of negotiation. Difficult design problems are often assumed to be readily solved using software. Hardware platforms may be inappropriate for software requirements so software must compensate for this.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 23

Requirements and design



Requirements engineering and system design are inextricably linked. Constraints posed by the systems environment and other systems limit design choices so the actual design to be used may be a requirement. Initial design may be necessary to structure the requirements. As you do design, you learn more about the requirements.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 24

Spiral model of requirements/design

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 25

System modelling


 

An architectural model presents an abstract view of the sub-systems making up a system May include major information flows between sub-systems Usually presented as a block diagram May identify different types of functional component in the model

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 26

Burglar alarm system

Movement sensors Door sensors

Alarm controller External control centre

Siren

Voice synthesiser

Telephone caller

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 27

Sub-system description

Sub-system Movement sensors Door sensors Alarm controller Siren Voice synthesizer Telephone caller

Description Detects movement in the rooms monitored by the system Detects door opening in the external doors of the building Controls the operation of the system Emits an audible warning when an intruder is suspected Synthesizes a voice message giving the location of the suspected intruder Makes external calls to notify security, the police, etc.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 28

ATC system architecture

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 29

Sub-system development


Typically parallel projects developing the hardware, software and communications. May involve some COTS (Commercial Off-the-Shelf) systems procurement. Lack of communication across implementation teams. Bureaucratic and slow mechanism for proposing system changes means that the development schedule may be extended because of the need for rework.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 30

System integration


The process of putting hardware, software and people together to make a system. Should be tackled incrementally so that subsystems are integrated one at a time. Interface problems between sub-systems are usually found at this stage. May be problems with uncoordinated deliveries of system components.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 31

System installation


After completion, the system has to be installed in the customers environment

Environmental assumptions may be incorrect; May be human resistance to the introduction of a new system; System may have to coexist with alternative systems for some time; May be physical installation problems (e.g. cabling problems); Operator training has to be identified.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 32

System evolution


Large systems have a long lifetime. They must evolve to meet changing requirements. Evolution is inherently costly
Changes must be analysed from a technical and business perspective; Sub-systems interact so unanticipated problems can arise; There is rarely a rationale for original design decisions; System structure is corrupted as changes are made to it.

Existing systems which must be maintained are sometimes called legacy systems.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 33

System decommissioning


Taking the system out of service after its useful lifetime. May require removal of materials (e.g. dangerous chemicals) which pollute the environment
Should be planned for in the system design by encapsulation.

May require data to be restructured and converted to be used in some other system.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 34

Organisations/people/systems


Socio-technical systems are organisational systems intended to help deliver some organisational or business goal. If you do not understand the organisational environment where a system is used, the system is less likely to meet the real needs of the business and its users.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 35

Human and organisational factors



Process changes
Does the system require changes to the work processes in the environment? Does the system de-skill the users in an environment or cause them to change the way they work? Does the system change the political power structure in an organisation?

Job changes

Organisational changes

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 36

Organisational processes


The processes of systems engineering overlap and interact with organisational procurement processes. Operational processes are the processes involved in using the system for its intended purpose. For new systems, these have to be defined as part of the system design. Operational processes should be designed to be flexible and should not force operations to be done in a particular way. It is important that human operators can use their initiative if problems arise.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 37

Procurement/development processes

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 38

System procurement


Acquiring a system for an organization to meet some need Some system specification and architectural design is usually necessary before procurement
You need a specification to let a contract for system development The specification may allow you to buy a commercial off-theshelf (COTS) system. Almost always cheaper than developing a system from scratch

Large complex systems usually consist of a mix of off the shelf and specially designed components. The procurement processes for these different types of component are usually different.
Software Engineering, 7th edition. Chapter 2 Slide 39

Ian Sommerville 2004

The system procurement process

Off-the-shelf system available Adapt requirements Choose system Issue request for bids Choose supplier

Survey market for existing systems

Issue request to tender Custom system required

Select tender

Negotiate contract

Let contract for development

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 40

Procurement issues


Requirements may have to be modified to match the capabilities of off-the-shelf components. The requirements specification may be part of the contract for the development of the system. There is usually a contract negotiation period to agree changes after the contractor to build a system has been selected.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 41

Contractors and sub-contractors



The procurement of large hardware/software systems is usually based around some principal contractor. Sub-contracts are issued to other suppliers to supply parts of the system. Customer liases with the principal contractor and does not deal directly with sub-contractors.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 42

Contractor/Sub-contractor model

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 43

Legacy systems


Socio-technical systems that have been developed using old or obsolete technology. Crucial to the operation of a business and it is often too risky to discard these systems
Bank customer accounting system; Aircraft maintenance system.

Legacy systems constrain new business processes and consume a high proportion of company budgets.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 44

Support software

Uses

Embeds knowledge of Application software Uses Business policies and rules Constrains

Runs-on

Runs-on

Uses

System hardware

Application data

Business processes

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 45

Legacy system components

 

 

Hardware - may be obsolete mainframe hardware. Support software - may rely on support software from suppliers who are no longer in business. Application software - may be written in obsolete programming languages. Application data - often incomplete and inconsistent. Business processes - may be constrained by software structure and functionality. Business policies and rules - may be implicit and embedded in the system software.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 46

Socio-technical system Business processes Application software Support software Hardware

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 47

Key points


Socio-technical systems include computer hardware, software and people and are designed to meet some business goal. Emergent properties are properties that are characteristic of the system as a whole and not its component parts. The systems engineering process includes specification, design, development, integration and testing. System integration is particularly critical.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 48

Key points


Human and organisational factors have a significant effect on the operation of socio-technical systems. There are complex interactions between the processes of system procurement, development and operation. A legacy system is an old system that continues to provide essential services. Legacy systems include business processes, application software, support software and system hardware.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 2

Slide 49