Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 122 views

    E Manage Ultimate Wiring Steps For JDM Supra With 2JZ GE

    Uploaded by

    Costa Tsimiklis
    This document provides wiring instructions for installing an E-manage engine management system on a JDM Supra with a 2JZ-GE engine. It outlines the following key steps: 1. Remove the stock ECU and familiarize yourself with the pin configurations of the ECU and E-manage harnesses. 2. Disconnect the battery before doing any wiring. Wire up the basic connections of power, MAP sensor, RPM signal, and throttle position sensor first to test that the E-manage powers on successfully. 3. If all works well, disconnect the battery again and continue wiring. Otherwise recheck the wiring. Wiring instructions are provided for the fuel injectors as well.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    E Manage Ultimate Wiring Steps For JDM Supra With 2JZ GE

    Uploaded by

    Costa Tsimiklis
    122 views7 pages
    This document provides wiring instructions for installing an E-manage engine management system on a JDM Supra with a 2JZ-GE engine. It outlines the following key steps: 1. Remove the stock ECU and familiarize yourself with the pin configurations of the ECU and E-manage harnesses. 2. Disconnect the battery before doing any wiring. Wire up the basic connections of power, MAP sensor, RPM signal, and throttle position sensor first to test that the E-manage powers on successfully. 3. If all works well, disconnect the battery again and continue wiring. Otherwise recheck the wiring. Wiring instructions are provided for the fuel injectors as well.

    Original Title

    EmanageUltimate_Wiring 2GZ GE

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides wiring instructions for installing an E-manage engine management system on a JDM Supra with a 2JZ-GE engine. It outlines the following key steps: 1. Remove the stock ECU and familiarize yourself with the pin configurations of the ECU and E-manage harnesses. 2. Disconnect the battery before doing any wiring. Wire up the basic connections of power, MAP sensor, RPM signal, and throttle position sensor first to test that the E-manage powers on successfully. 3. If all works well, disconnect the battery again and continue wiring. Otherwise recheck the wiring. Wiring instructions are provided for the fuel injectors as well.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    122 views7 pages

    E Manage Ultimate Wiring Steps For JDM Supra With 2JZ GE

    Uploaded by

    Costa Tsimiklis
    This document provides wiring instructions for installing an E-manage engine management system on a JDM Supra with a 2JZ-GE engine. It outlines the following key steps: 1. Remove the stock ECU and familiarize yourself with the pin configurations of the ECU and E-manage harnesses. 2. Disconnect the battery before doing any wiring. Wire up the basic connections of power, MAP sensor, RPM signal, and throttle position sensor first to test that the E-manage powers on successfully. 3. If all works well, disconnect the battery again and continue wiring. Otherwise recheck the wiring. Wiring instructions are provided for the fuel injectors as well.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    EmanageultimatewiringstepsforJDMSuprawith2JZGE.

    Saturday,April26,2008 1. RemovethestockECUfromthepassengerfootwellandfamiliarizeyourselfwiththepin configuration.

    Therearetwoharnesses,allexceptoneofthepinsisinharnessE9,sothenumbersinthe followingdiagramsassumeharnessE9isbeingused.TheonlypinfromE10isthepowerwire whichconnectstotheEFImainrelayonE1031

    PinoutsfortheJDMECUareasfollows.ThepinsbeingusedbytheEmanageareshadedinon thediagrams.

    AttheotherendoftheharnesswehavetheEmanageharnesses.HereisthepinoutfortheEmanage ultimateharnesswiththewiresmarkedthatyouwillneedtouse.

    2. DisconnectthenegativeterminalfromthebatterybeforedoingANYwiringontheECUorE manage.Solderingisthebestwaytoconnectthewiresupbutifyouarenottoohandywiththe solderingironthenIrecommendthatyousolderthesplicedwiresandusethesuppliedcrimp terminalsforthecutwires.Thediagramsshowwhichtypeofterminalstoputonthewiresso justfollowthepictures. ThemostbasicEmanagewiringissimplypower,MAP,RPMandTPS.Wiretheseupfirstand checkthattheEmanagepowersupsuccessfully.

    3. Ifalliswell,thenonceagaindisconnectthebatteryandcontinuewiththewiring.Otherwise recheckallthewiring. ThepinsfortheInjectorsareasfollows

    4. IfyouwishtocontrolIgnitionwiththeEmanagethenthereisjustonemorewiretocut,since thedistributortypeignitiononlyhasoneinput:

    5. EnjoyyournewEmanageIfthereareanyquestionsortyposinthisdocumentPMme (DrNick)ontheforums.

    You might also like