Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 107 views

    MACCS 400 Version 2 Multi Axis Conformal Coating System For Application of Conformal Coating Materials

    Uploaded by

    Lee Hitchens
    The MACCS 400 Multi Axis Conformal Coating System can be configured as an inline or batch application machine for conformal coating materials utilising several spray and dispense valves.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    MACCS 400 Version 2 Multi Axis Conformal Coating System For Application of Conformal Coating Materials

    Uploaded by

    Lee Hitchens
    107 views1 page
    The MACCS 400 Multi Axis Conformal Coating System can be configured as an inline or batch application machine for conformal coating materials utilising several spray and dispense valves.

    Original Title

    MACCS 400 Version 2 Multi Axis Conformal Coating System for application of conformal coating materials

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The MACCS 400 Multi Axis Conformal Coating System can be configured as an inline or batch application machine for conformal coating materials utilising several spray and dispense valves.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    107 views1 page

    MACCS 400 Version 2 Multi Axis Conformal Coating System For Application of Conformal Coating Materials

    Uploaded by

    Lee Hitchens
    The MACCS 400 Multi Axis Conformal Coating System can be configured as an inline or batch application machine for conformal coating materials utilising several spray and dispense valves.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ACR Model 400

    Multi Axis Conformal Coating System


    The ACR Multi-Axis Conformal Coating System (MACCS) provides a reliable robotic conformal coating application platform for low, medium and high volume batch and inline conformal coating processing. Equipped with programmable software and servo motor control, the straightforward design means ease of application and maintenance at all levels of the conformal coating cycle.

    SPECIFICATIONS MACCS 400 SPECIFICATIONS


    MOTION CONTROL:
    Type: Servo motors, slides on XYZ axes, 560 degree rotation axis and 20 degree valve tilt mechanism XYZ Repeatability: 25 microns (0.001) XYZ Resolution: 25 microns (0.001) X-Y Velocity: up to 800 mm/s (32/s) max

    AREA: COATING AREA:


    XYZ travel: 500mm x 480mm x 90mm (19.6 x 18.9 x 3.5)

    PCB HANDLING:
    BATCH PCB Fixture: 500mm x 480mm x 90mm (19.6 x 18.9 x 3.5) INLINE PCB/pallet size:500mm x 480mm x 90mm (19.6x 18.9x 3.5) Conveyor Type: Chain Min Conveyor Width: 50mm (1.97) Max Conveyor Width: 480 mm (18) Edge Clearance: 4.7mm (0.185) Transport Height: 940mm - 965mm (37 38) Communication: SMEMA

    SCH reserves the right to make design changes to products to improve their function. These changes may occur between publishing.

    OPTIONS: COATING FEED OPTIONS:


    Cartridge or Pressure Vessel feed

    FACILITIES REQUIREMENTS:
    System Footprint: L: 1325 W: 1065 H: 1760 mm (L: 52.1 W: 41.9 H: 69.2) Air Supply: 80 PSI dry, clean air Extraction: 600 CFM Power (Mains): 120/220 VAC, 50/60 Hz System Weight: 450 Kgs Standards Compliance: CE

    STANDARD FEATURES:
    Front toughened glass for ease of viewing and maintenance Door Interlock controls for safety Purge and solvent cups for flushing Coating software, XP based, On-Board PC Remote teach pendant Internal UV and white light

    OPTIONAL FEATURES:
    Low level material sensor Built-in exhaust fan with air flow indicator Bar code reader Viscosity control of fluid Multiple head configuration Laser pointer In situ camera for manual alignment

    FLUID DELIVERY METHOD:


    Standard Options: 1. Dual Atomised Spray & Needle Valve 2. Non-Atomised Film Coating Valve

    MANUFACTURED DESIGNED AND MANUFACTURED IN THE UNITED KINGDOM


    SCH Technologies Ltd Newburgh Building, McLinctock Way, Barnsley, South Yorkshire S70 6BF UK Tel: +44(1226) 249 019 Fax: +44 (0) 1226 770 809 www.conformalcoating.co.uk

    You might also like