Select Coat® SL-940 Series

Powerful Process Control for Conformal Coating

Features and Benefits

 Integrated process controls ensure high-quality
wet dispense performance
 Automated batch or in-line processing
 The modular design accommodates future
production needs
 Easy Coat® software – allows programmers to set,
measure, record, and trace process parameters
 Offline and online programming
 Choose from a wide range of options – to improve
statistical process control, production uptime, and
yield
 Downdraft air management system safely
removes VOCs – meeting Low Flammable Limits
(LFL) standards
 Designed for easy maintenance – stainless steel
surfaces are easy to clean and resistant to strong
agents

Nordson ASYMTEK’s Select Coat SL-940 Series traceable. Process history for all control parameters
conformal coating system is designed to provide the can be maintained in log files. Creating programs
highest quality and productivity for automated using ASYMTEK’s optional vision system further
batch or in-line processing. The system’s robust simplifies the process and the optional pattern
feature set is built upon ASYMTEK’s unmatched recognition software can automatically align the part
industry expertise in fluid dispensing and conformal and check for skip marks.
coating process control. The result is a coating
Options that provide higher levels of statistical
solution that simplifies the complexities of
process control are also available. Fluid and air
conformal coating while elevating the art of coating
pressure can be set and monitored through
complex surfaces.
software-controlled electronic valves. Options such
The SL-940 standard system features a batch-style as Laser Fan Width Control, Viscosity Control, Bar
configuration that includes a PCB/frame holder for Code readers, and Flow Monitoring can be added to
single part- and batch-coating applications. The further maximize production uptime and yield.
system can carry up to three applicators and you can
Product handling options can be added to optimize
choose from a variety of additional options to
equipment performance to support your
upgrade the SL-940 into a fully automated in-line
requirements. The standard SL-940 configuration
solution.
allows you to integrate your own custom handling.
The feature-rich, Easy Coat software is specifically Other options include batch tooling or single- or
designed for conformal coating applications – dual-lane conveyor systems with choice of regular
process parameters are set, measured, recorded and or heavy-duty capabilities.

Page 1 of 3
Select Coat® SL-940 Series Specifications and Facility Requirements
Motion System Facilities Requirements
Type: Closed-loop servo motors System footprint:
with encoders 1000 mm width x 1329 mm depth (39.3 x 52.3 in.)
X-travel: 500 mm Computer keyboard/monitor occupy additional 527 mm (20.7 in.)
Y-travel: 525 mm in the front
Z-travel: 100 mm maximum Lower door requires 855 mm (33.7 in.) clearance to open in the front
Encoder Resolution: 0.005 mm. (0.0002 in.) 1000 mm clearance in the rear is recommended
X-Y Velocity: 1.0 m/s (39.4 in./s) Dimensional diagrams on next page.
X-Y Acceleration: 1 g peak with S-curve jerk control
Z-Axis Velocity: 250 mm/s (10 in/s) Air supply: 620 kPa (90 psi. 6.2 Bar), up to 0.34 m3/min
X-Y Repeatability: 0.025 mm. (0.001 in.), 3 sigma (20.4 m3/hr 12 SCFM) max depending on
Z-Axis Repeatability: 0.025 mm. (0.001 in.), 3 sigma configuration
X-Y Resolution: 0.010 mm. (0.0004 in.), 3 sigma Ventilation, air: 340 m3/hr (200 SCFM)
Z-Axis Resolution: 0.025 mm. (0.001 in.), 3 sigma @ 25.4 mm (1.0 in.) water column
Positional Accuracy: 0.075 mm. (0.003 in.), 3 sigma Optional, nitrogen source:
410 kPa (60 psi, 4.1 Bar) @ 0.014 m3/min
Dispense Area (0.84 m3/hr 0.5 SCFM); required for moisture
Dependent upon system configuration. Contact Nordson ASYMTEK sensitive materials
for specifics. Main power: 200/240 VAC, 10 A (max), 50/60 Hz
Note: System can run on 120 VAC without heater option installed.
Conveyor
Noise: Peak ≤ 76.0 dBA; Average ≤ 70.7 dBA
In-line: Standard chain conveyor System weight: 426 Kg (940 lbs.) max
Motor driven width adjustment: 35 to 475 mm (1.4 to 18.7 in.) Standards compliance: SMEMA, CE, NFPA, and SEMI
Maximum clearance: 100 mm (4 in.) above and below PCB
Maximum pallet/PCB weight: 5 kg (11 lbs.) [Optional: 7 kg (15 lbs.)] Standard Features for SL-940
Applicator fluid and air pressures are software-controlled
Adjustable Tooling Rails Solvent-purge station with cups
Aluminum extrusion profile: The rail spacing is adjusted Door interlock controls
by moving the back rail Downdraft ventilation with redundant safety vent switch
Width adjustment: 35 to 475 mm (1.4 to 18.7 in.)
Stainless steel interior
Maximum clearance: 100 mm (4 in.) above and below PCB
Front access hatch with glass
Maximum pallet/PCB weight: 7 kg (15 lbs.)
Computer arm adjustable in height and right/left orientation
Tooling plate is also available: Aluminum; 5 mm (0.2 in.) thickness;
Easy Coat software
508 x 508 mm (20 x 20 in.)

Computer Featured Options

Bar code recognition system, 1D or 2D
Computer: Laptop computer
Black light
Software Board presence sensor
User environment: Easy Coat® software Dual-simultaneous applicator capability
Operating system: Windows® 7 software Dual-simultaneous programmable pitch
Dual-toggle applicator capability
Fluid Delivery Methods Flow meter
Precise Non-Atomized Conformal Coating Application: Laser Fan Width Control (for SC-104/105, -204/205, and -280)
Select Coat® SC-104/105 film coater (heated, circulating) Laser pointer programming tool
Select Coat® SC-204/205 film coater (non-circulating) Fiducial find camera
Select Coat® SC-280 film coater (circulating and non-circulating) Solvent cup with fluid level sensor
Low fluid sensor
Versatile Coating in Three Modes:
Low fluid scale
SC-200 Swirl Coat® applicator
SC-300 Swirl Coat® applicator Material change over (manual)
Pre-queue board station
Highly Selective, Precision Jet Coating: Programming camera
SC-400 PreciseCoat® jet Four-position tilt (for SC-300 and -400)
Fifth-axis tilt (for SC-104/105, -204/205, and -280)
Versatile Valves: Light beacon
DV-0x series Factory Information System (FIS): contact your sales representative

Page 2 of 3
Select Coat® SL-940 Series Dimensions
Dimensions are in millimeters For more information,
visit our website to
locate your local
representative or
contact your regional
office:

nordsonasymtek.com
info@nordsonasymtek.com

North America
Headquarters
Carlsbad, CA

China
Shanghai
Beijing
Guangzhou
Taipei

EMEA
Deurne, Netherlands

S.E. Asia/Australia
Singapore

Korea
Seoul

Japan
Tokyo

India
Chennai

Specifications and dimensions subject to change. Contact Nordson

ASYMTEK for more detailed drawings if required.

Nordson ASYMTEK
+1.760.431.1919
2747 Loker Avenue West
Carlsbad, CA USA 92010-6603

Published 2018-03-21 Updated

Page 3 of 3