Ac 164
Ac 164
Ac 164
Description
The PowerCommand control (2100) is a microprocessorbased generator set monitoring, metering and control system. The control provides an operator interface to the genset, digital voltage regulation, digital governing and generator set protective functions. The integration of all the functions into a single control system provides enhanced reliability and performance compared to conventional control systems. It is suitable for use on a wide range of generator sets in non-paralleling applications. Kits are available to add control features to generator sets shipped with the PowerCommand control, and also to upgrade generator sets with other control systems to PowerCommand capability. For detailed specification information, see Power Command control spec sheet (S-1409).
Features
Upgrade kits - Allow PowerCommand (2100) series controls to be upgraded to include factory features in the field. Available kits include: - PowerCommand network (optional) - provides LonMark interface to external devices through a twisted pair wire. - Integrated power transfer control (optional) - provides automatic power transfer control functions integrated into genset control. - Control heater - Output relay kit - Bargraph AC meter display - Membrane panel repair kits - Language inserts Complete control kits - Provide all the parts necessary to convert an existing generator set for operation by the PowerCommand (2100) control system. Parts available include control box assembly, mounting hardware, conversion plates for Detector and previous similar physical configurations, senders and other hardware.
2010 Cummins Power Generation Inc. All rights reserved. Cummins Power Generation, Cummins and PowerCommand are registered trademarks of Cummins Inc. Our energy working for you. and AmpSentry are trademarks of Cummins Power Generation. Specifications are subject to change without notice. AC-164d (6/10) Page 1 of 2
KP60
Certification
ISO9001 - This product set was designed and manufactured in facilities certified to ISO9001. CUL - This product is CUL Listed, Category NITW7. PTS - The Prototype Test Support (PTS) program verifies the performance integrity of a generator set design. Products bearing the PTS symbol have been subjected to demanding tests in accordance to NFPA 110 to verify the design integrity and performance under both normal and abnormal operating conditions. UL - The control is suitable for use on generator sets that are Listed to UL 2200, Stationary Engine Generator Assemblies. The PowerCommand control is Listed to UL 508 - Category NITW. CE - This product is suitable for use on generator sets that are CE marked.
Warranty
All components and subsystems are covered by an express limited one-year warranty. Other optional and extended factory warranties and local distributor maintenance agreements are available. Contact your distributor/dealer for more information.
Americas 1400 73rd Avenue N.E. Minneapolis, MN 55432 USA Phone: 763 574 5000 Fax: 763 574 5298
Europe, CIS, Middle East and Africa Manston Park Columbus Ave. Manston Ramsgate Kent CT 12 5BF United Kingdom Phone 44 1843 255000 Fax 44 1843 255902
Asia Pacific 10 Toh Guan Road #07-01 TT International Tradepark Singapore 608838 Phone 65 6417 2388 Fax 65 6417 2399
Warning: Back feed to a utility system can cause electrocution and/or property damage. Do not connect generator sets to any building electrical system except through an approved device or after building main switch is open.