f3n2c PDF

www.emersonct.
com
800-893-2321
Focus 3
Rugged and Robust

The Focus 3 is a single-phase analog drive for DC
motors with power ranges from 1/4 to 5 hp. Years of
proven engineering design matched with surface mount
technology make this newest Focus product rugged and
reliable.
Customer feedback guided the development of the
Focus 3. Many features that were typically available only
as options are now standard, expanding its versatility
and simplifying installation.
Control Techniques Focus 3 provides flexibility. You can
stock the complete product line with the four chassis
units (two regenerative and two non-regenerative) and
two enclosure kits.
Analog DC Drive
1/4 to 5 hp, 1 phase, 115-230 VAC
Non-regen and Regen models
Isolated control circuit (Regen)
NEMA 4/12 or Chassis
Tachometer or armature feedback
Complete Motor Solutions
Conveyor
Rugged
Focus 3
6
7
1
8 9 0
0 1 2
3 4 5
FO
CU
S
FOCUS CHASSIS
F3N2C
F3R2C
F3N5C
F3R5C
271
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
www.emersonct.com
800-893-2321
RATINGS: FOCUS 3
SINGLE PHASE INPUT
.25 to 1 hp (115 VAC)
.50 to 5 hp (230 VAC)
FEATURE/PERFORMANCE ADVANTAGE
Surface mount design
Provides rugged and reliable operation at a costeffective price
NEMA 4/12 enclosure as standard
Protects the integrity of the drive in tough,
demanding environments
Regenerative and non-regenerative models available in the
same footprint
Minimizes machine design variations
Focus 3
Jumper programmable for:

Voltage rating (115-230 VAC)
Frequency (50/60 Hz)
Speed or torque control
Tachometer or armature feedback
Inherent flexibility in the drive design meets
numerous customer requirements with a minimal
inventory of drive models and options
Independent acceleration and deceleration rates
Adaptable to many machine and process speed
control requirements
Speed and current loop stability adjustments
Precisely matches the drive to the motor dynamics
Non-regenerative
Motor
HP
.25 to 1
.50 to 2
.25 to 1
.50 to 2
3 to 5
3 to 5
Input
AC Amps
Volts
115 14
230 14
115 14
230 14
230 35
230 35
Model
Order
Code
Chassis
F3N2C
NEMA 4/12
F3N2E
Chassis
NEMA 4/12
F3N5C
F3N5E
Model
Order
Code
Chassis
F3R2C
NEMA 4/12
F3R2E
Chassis
NEMA 4/12
F3R5C
F3R5E
Output
DC Volts
Amps
Arm
Field Arm Field
90
180
90
180
180
180
100
200
100
200
200
200
10
10
10
10
25
25
1
1
1
1
1
1
Regenerative
Motor
HP
.25 to 1
.50 to 2
.25 to 1
.50 to 2
3 to 5
3 to 5
Input
AC Amps
Volts
115 16
230 16
115 16
230 16
230 40
230 40
Output
DC Volts
Amps
Arm
Field Arm Field
90
180
90
180
180
180
100
200
100
200
200
200
10
10
10
10
25
25
1
1
1
1
1
1
Focus 3 is available with factory installed modifications.

To order choose the drive required from the table below
and then add modification suffixes to the order code
(separated by hyphens).
Separately adjustable jog speed

Aids the customer in setting up and testing their
machine
Auto (current/voltage signal) or Manual (speed pot)
operation
Provides local or remote speed control without an
option kit
Isolated control circuit (regen)
Signal common can be earth grounded and tied
directly to other drives without additional isolation
Order String
F3
xx
xx
Modification 2, etc.
Modification 1
C = Chassis, E = Enclosed
Drive Horsepower: 2 = 2 hp, 5 = 5 hp
N = Non-regen, R = Regen
F3 = Focus 3 Product Family
272
www.emersonct.com
800-893-2321
Focus 3
TERMINAL DIAGRAM: FOCUS 3
TERMINAL DESCRIPTION
Pin #
1
2
3
4
5
6
7
8
Type
+24 VDC Power Supply
Tie Point (motor thermal)
Run Relay
Relay (N.O.)
Relay Common
Relay (N.C.)
Jog Reference Select
(Logic Input)
Jog Pot Supply Input
9
10
11
12
+10 VDC
Speed Reference
-10 VDC (regen only)
Circuit Common
13
14
Minimum Speed Pot

Remote Current Limit Pot
Input
Remote Current Limit Pot
Input
Auto / Manual Input
Current follower Input
Voltage follower Input
DC tachometer Input (-)
DC tachometer Input (+)
15
16
17
18
19
20
Notes
For drive use only
No internal connection
+24 VDC @ 10 mA
Run relay contact
120 VAC, @ 1A resistive
+24 VDC, 30k Ohms
(requires run input)
Analog Input, 10 VDC
(-10 VDC regen only)
Reference Supply, 5 mA max
Analog Input, 10 VDC, 20k Ohms
Reference Supply, 5 mA max
Circuit common hot to earth
ground (non-regen only)
For use with speed pot only
Wiper input (refer to
Jumpers JP6 & JP7)
CW connection
(refer to Jumpers JP6 & JP7)
Logic Input, +24 VDC @ 30k Ohms
Analog Input, 4-20 or 1-5 mA
Analog Input, 200 VDC max
Analog Input, 160 VDC max
Circuit common
273
www.emersonct.com
800-893-2321
SPECIFICATIONS: FOCUS 3
DIMENSIONS
Adjustments
Maximum Speed
80 to 120% of rated speed
Minimum Speed
0 to 30% of maximum speed
IR Compensation
0 to 20% of rated voltage
Current Limit
0 to 150% of selected range
Acceleration
0.3 to 20 seconds
Deceleration
0.3 to 20 seconds
Jog Speed
0 to 30% of rated speed
Operator Functions
Speed Adjustment
Start/Stop
Standard
Standard (Enclosed)
Customer Supplied (Chassis)
Run/Jog
Option Kit
Forward/Reverse (Regen Only)
Option Kit
Auto/Manual
Option Kit
Customer Selectable
Rated Input Voltage
115 or 230 VAC
Control Mode
Speed or Torque
Output Current
Hi / Med / Low / Xlow
Armature Voltage Feedback
Hi (180) / Lo (90) VDC
Tachometer Feedback
Speed Feedback Selector
Line Frequency
Focus 3
Current Limit Pot Selector
Hi / Lo
Armature / Tachometer
50 / 60 Hz
Local / Remote
Control
Logic Control Power
24 VDC
Speed Potentiometer
5k Ohms, 2 watts
Speed Regulation
(95% load change):
Armature Voltage Feedback
Tachometer Feedback (i.e. 5PY)
1% of maximum speed with IR

compensation. (does not include drift
due to field)
0.5% of base speed
Drive Operating Conditions

NEMA 4/12 Enclosure
Altitude
Ambient Temperature
Rated Input Voltage
Rated Frequency
Overload Capacity
Standard (Enclosed)
Option Kit (Chassis)
1000m (3,300 ft)
0 to 40C (32 to 104F) (Enclosed)
0 to 55C (32 to 131F) (Chassis)
115-230 VAC 10%
48 to 62 Hz
150% of selected rating
Efficiency:
Controller (min)
98%
Drive (typical)
86%
274
www.emersonct.com
800-893-2321
Focus 3
M CONTACTOR KIT
FACTORY INSTALLED MODIFICATIONS

Focus 3 Kits are available as either factory-installed options
or field kits. To order factory installed modifications,
choose the basic drive required from the ratings table on
page 272 and then add modification suffixes (separated
by hyphens) to the basic order code.
Function
Description
Suffix
M
.25 - 1 hp @ 115V
Contactor Kits* .50 - 2 hp @ 230V
3 - 5 hp @ 230V
.5 hp @ 115 V, 2 hp @ 230V
Dynamic
.25 - .33 hp @ 120V, 1.5 hp @ 230V
Braking
.75 - 1 hp @ 230V
Kits
.5 hp @ 230V
.75 - 1 hp @ 115V
3 hp @ 230V
5 hp @ 230V
Toggle
Run / Jog
Switches
Auto / Manual
Forward / Reverse
Signal
Signal Isolation Board
Isolation
Feedback
AC Tachometer Input Board
Speed Pot
Ten-Turn Potentiometer
M1
M2
M5
DB2
DB4
DB6
DB7
DB1
DB3
DB5
TSA
TSB
TSC
NS
ACT
TTP
* When the M kit is factory installed, UL will not apply.
ENCLOSURE OPTIONS
By stocking these two enclosure kits
along with the four chassis drives,
the distributor can supply all Focus 3
models. The enclosure kits include the
speed pot and the start/stop switch
pre-wired to a plug-on terminal
strip and all gasketing required for a
NEMA 4/12 rating.
Description
Order Code
2 hp, non-regen and regen
F3SE
5 hp, non-regen and regen
F3LE
TOGGLE SWITCH (F3TS)

This kit is used to provide one of the following functions:
Run/Jog, Auto/Manual or Fwd/Rev (regen only). It can be
mounted in the Focus 1 or Focus 3 enclosure cover, or
remotely mounted when used with the chassis drive. The
F3TS kit includes the toggle switch, NEMA 4/12 switch
boot and connection wires for enclosure cover use. A
maximum of three kits may be used with the enclosure
cover.
This kit provides a positive

disconnect of the motor
armature when the controller
is stopped, preventing motor
rotation in the event of SCR
misfire due to line noise. It
includes the DB (dynamic
braking) poles, an auxiliary
normally open (N.O.)
contact, all connection wires
and a magnetic contactor
for mounting in the Focus
3 chassis or enclosed drives.
This kit may be required by
local and / or national electrical codes.
Description
Order Code
1 hp, 115 VAC
F3M112
2 hp, 230 VAC
F3M224
5 hp, 230 VAC
F3M524
Focus 3
Options
DYNAMIC BRAKING KIT

Dynamic braking provides rapid motor stopping by
quickly dissipating the stored energy in the rotating
motor and load. These kits are designed for use with the
Focus 3 contactor kits. The resistors have been sized in
accordance with the following NEMA specification for
dynamic braking: Three stops in rapid succession
with the load inertia equal to the motor inertia
then cooling forever.
AC Input
120 VAC
240 VAC
HP (Typical)
DB Kit
Order Code
.25 to .33
.5
.75 to 1
.5
.75 to 1
1.5
2
3
5
F3DB1524
F3DB224
F3DB112
F3DB0524
F3DB224
F3DB1524
F3DB224
F3DB324
F3DB524
275
www.emersonct.com
800-893-2321
Focus 3
TEN-TURN SPEED POTENTIOMETER
AC TACHOMETER INPUT
This option kit allows the Focus
3 to accept AC tachometer
feedback. It mounts directly to the
Focus 3 control board and accepts
a range of 45 to 110 VAC at
maximum speed.
Description
Order Code
AC Tachometer Input
F3ACT
SIGNAL ISOLATOR BOARD
This ten-turn speed

pot provides a vernier
scale for precise and
repeatable speed
setting while a
locking tab prevents
inadvertent speed
changes. It may be
mounted in the Focus
1 or Focus 3 enclosure, or in a remote operator station.
Description
Order Code
Ten-Turn Speed Potentiometer
6160-9001
Focus 3
This option is used in

applications where
isolation is required
between an external
control signal and the
motor controller (which
may or may not be at
earth ground potential).
It can be used to isolate a variety of voltage or current
signals (see specifications below) or simply to isolate
the speed potentiometer. The potentiometer power
supply is included. This option can be mounted inside
the Focus 3 cover or panel mounted on a piece of curtis
track (included with kit). Because the board has a unipolar output, it is typically used on single directional
applications.
Specifications
Input Power
Control Relay
Relay Contacts
17 to 30 VDC @ 50 mA max.
(for control circuitry)
24 VDC @ 12.1 mA (JP5 = 24 VDC)
115 VAC @ 20 mA (JP5 = 120 VAC)
(qty. 2) Form A, 1A @ 250 VAC
Isolation Voltage
240 VAC line voltage

2000 VAC hi-pot for 1 minute
Voltage Ranges
5, 12, 26, 52, 98 & 208 VDC

180 Ohms/volt
Current Ranges
0 - 5 or 1- 5 mA
910 Ohms input impedance
0 - 20 or 4 - 20 mA
250 Ohms input impedance
Speed Pot
Output
5k Ohms, 2 watts (includes

+10 VDC power supply for the pot)
0 to +10 VDC (uni-polar)
Description
Order Code
Signal Isolator Board
F3NSBD
276

f3n2c PDF

Uploaded by

Copyright:

Available Formats

f3n2c PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

f3n2c PDF

Uploaded by

Copyright:

Available Formats

www.emersonct.

Rugged and Robust

1/4 to 5 hp, 1 phase, 115-230 VAC

Non-regen and Regen models

Isolated control circuit (Regen)

NEMA 4/12 or Chassis

Tachometer or armature feedback

Complete Motor Solutions

Jumper programmable for:

Field Arm Field

Field Arm Field

Focus 3 is available with factory installed modifications.

Separately adjustable jog speed

TERMINAL DIAGRAM: FOCUS 3

Minimum Speed Pot

80 to 120% of rated speed

0 to 30% of maximum speed

0 to 20% of rated voltage

0 to 150% of selected range

0 to 30% of rated speed

Forward/Reverse (Regen Only)

115 or 230 VAC

Hi / Med / Low / Xlow

Armature Voltage Feedback

Hi (180) / Lo (90) VDC

Current Limit Pot Selector

Tachometer Feedback (i.e. 5PY)

1% of maximum speed with IR

Drive Operating Conditions

FACTORY INSTALLED MODIFICATIONS

* When the M kit is factory installed, UL will not apply.

2 hp, non-regen and regen

5 hp, non-regen and regen

TOGGLE SWITCH (F3TS)

This kit provides a positive

1 hp, 115 VAC

2 hp, 230 VAC

5 hp, 230 VAC

DYNAMIC BRAKING KIT

TEN-TURN SPEED POTENTIOMETER

SIGNAL ISOLATOR BOARD

This ten-turn speed

Ten-Turn Speed Potentiometer

This option is used in

240 VAC line voltage

5, 12, 26, 52, 98 & 208 VDC

5k Ohms, 2 watts (includes

Signal Isolator Board

You might also like