Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 171 views

    DYNA GOVR f-22030

    Uploaded by

    chalogd
    The DYNA 8000 governor system provides speed and power control for engines and turbines. It uses a proportional electric solenoid actuator whose magnetic force is proportional to input current. Linear motion is converted to output shaft rotation via a bell crank. Models are available for clockwise or counter-clockwise rotation. It can control engines from 250-9500 Hz and mounts in any position.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    DYNA GOVR f-22030

    Uploaded by

    chalogd
    171 views4 pages
    The DYNA 8000 governor system provides speed and power control for engines and turbines. It uses a proportional electric solenoid actuator whose magnetic force is proportional to input current. Linear motion is converted to output shaft rotation via a bell crank. Models are available for clockwise or counter-clockwise rotation. It can control engines from 250-9500 Hz and mounts in any position.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The DYNA 8000 governor system provides speed and power control for engines and turbines. It uses a proportional electric solenoid actuator whose magnetic force is proportional to input current. Linear motion is converted to output shaft rotation via a bell crank. Models are available for clockwise or counter-clockwise rotation. It can control engines from 250-9500 Hz and mounts in any position.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    171 views4 pages

    DYNA GOVR f-22030

    Uploaded by

    chalogd
    The DYNA 8000 governor system provides speed and power control for engines and turbines. It uses a proportional electric solenoid actuator whose magnetic force is proportional to input current. Linear motion is converted to output shaft rotation via a bell crank. Models are available for clockwise or counter-clockwise rotation. It can control engines from 250-9500 Hz and mounts in any position.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Product Information

    DYNA 8000 GOVERNOR SYSTEM


    GENERAL
    The DYNA 8000 system will provide an engine governor for speed and power control of piston and gas turbine engines or steam and water turbines. The actuator is basically a simple, proportional, electric solenoid having a sliding armature whose magnetic force is proportional to input coil current. Balanced between the force of its return spring and the magnetic force, the armature glides on anti-friction bearings, providing a hysteresisfree linear movement. Linear motion is converted to an output shaft rotation by a bell crank.

    DYNA Power Controls

    TYPICAL APPLICATIONS
    Speed governing Remote throttle control Test stand throttle control Generator sets Power carts Pump sets

    All electric All engine compatibility Mounts in any position Engine mounted (actuator only) High reliability due to few moving parts Proportional actuator No hydraulic or oil line No special maintenance Spring returns output shaft to minimum position on removal of power or loss of magnetic pickup signal Precise repeatability

    O um MODELS AVAILABLE c o ce D en ed er ll ef R ro STANDARD FEATURES nt al ic co n or t U is H or F


    Actuators: Part No.
    DYNC-11020-000-0-12 DYNC-11020-000-0-24 DYNC-11024-000-0-12 DYNC-11024-000-0-24

    nt e

    ly n

    Standard Clockwise Output Shaft Rotation Standard Counter Clockwise Output Shaft Rotation

    Controllers: Speed Controllers Part No.


    Input Signal Frequency 250-1200 Hz 1200-2500 Hz 2500-5000 Hz 5000-9500 Hz 250-1200 Hz 1200-2500 Hz 2500-5000 Hz 5000-9500 Hz

    DYN1 -10652-000-0-12/24 DYN1 -10653-000-0-12/24 DYN1 -10654-000-0-12/24 DYN1 -10656-000-0-12/24 DYN1 -10682-000-0-12/24 DYN1 -10683-000-0-12/24 DYN1 -10684-000-0-12/24 DYN1 -10686-000-0-12/24

    Controllers: Conforming to Part No.


    DYN1 -10652-001-0-12/24 DYN1 -10653-001-0-12/24 DYN1 -10654-001-0-12/24 DYN1 -10656-001-0-12/24 DYN1 -10682-001-0-12/24 DYN1 -10683-001-0-12/24 DYN1 -10684-001-0-12/24 DYN1 -10686-001-0-12/24

    Specifications
    Input Signal Frequency 250-1200 Hz 1200-2500 Hz 2500-5000 Hz 5000-9500 Hz 250-1200 Hz 1200-2500 Hz 2500-5000 Hz 5000-9500 Hz F-22030-8

    SPECIFICATIONS (ACTUATOR)
    Operating Voltage: 12 VDC or 24 VDC, 20% Sealed Unit: Oil, water and dust tight Connection: Terminal strip Actuator Ambient Operating Temperature: -65F (-55C) to +255F (+125C) Mechanical Vibration: 5 to 500 Hz, Curve F, per Mil-Std. 810C, Method 514-2.

    INPUT SIGNAL FREQUENCY


    Input Signal Frequency in Hertz

    Engine RPM x Number of Gear Teeth on Flywheel 60 Seconds

    Select your controller for the correct input signal frequency range generated by the magnetic pickup at the maximum engine operated (RPM) speed.

    DYNA 8000 Actuators


    Work Joules 1.2 Foot-Pounds 1.0 Newton-Meters 1.4 Torque Pound-Foot 1.0 Output Rotary 35 Weight Kilograms 5 Pounds 11.0 Current @ 12 VDC Maximum Amperes @ Stall 12.5 Nominal Steady State Amperes 3.5 Current @ 24 VDC Maximum Amperes @ Stall 9.5 Nominal Steady State Amperes 2.5 Nominal Response Time for 63% of Stroke (Seconds) 0.030

    SPECIFICATIONS (CONTROLLER)
    Operating Voltages: 12 VDC or 24 VDC, 20% Circuit Boards: Are covered with a heavy conformal coating for moisture and vibration protection. Connection: Terminal Strip Controller Ambient Operating Temperature: -40F (-40C) to +180F (+85C).

    Temperature Stability: Better than 0.5 percent over a temperature range of -40F (-40C) to 167F (+75C)

    nc

    on H

    tr t

    ll o

    ed

    um c

    nt e

    Steady State Speed Band: 0.25%

    is

    ri o

    al c

    ef

    re e

    ce n

    ly n

    DYNA 8000 Controllers


    Output Current@ 12 VDC Output Current@ 24 VDC Weight Nominal Quiescent Current Maximum Amperes @ Stall Nominal Quiescent Current Maximum Amperes @ Stall Kilograms Pounds 80 ma 13 amps 80 ma 13 amps 0.863 1.9

    Adjustments: Speed, Gain, Integral and Droop.

    or F

    Mechanical Vibration: Withstands the following vibration without failure or degraded performance: 0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz; 0.02 inch double amplitude at 30 to 48 Hz; 2.5 Gs at 48 to 70 Hz.

    DIMENSIONS DYNA 8000 CONTROLLER

    Chassis Ground Screw

    nc

    on H

    tr t

    ll o

    ed

    um c

    nt e ce n

    ly n

    is

    ri o

    al c

    ef

    re e

    Dimensions are MM except as otherwise noted. Dimensions in [ ] in inches.

    *Shielded Cable Should be purchased from Barber-Colman or customer should purchase a cable with a wrapped mylar supported aluminum foil shield with a drain wire. **Remote Speed Potentiometer and 499K OHM Resistor DYNS 10000 The 5K Remote Speed Potentiometer can be wired two different ways.

    or F
    Failsafe
    TP1 TP2

    WIRING DIAGRAM FOR

    CONTROLLERS

    1. As shown by the solid line from the wiper of the 5K Potentiometer and then connected to Terminal #9. (No resistor required.) Adjustable range is approximately 5% at 1800 RPM. 2. As shown by the dashed line from the wiper of the 5K Potentiometer through Resistor R and then connected to Terminal #8. Reducing the value of R increases the remote adjustable speed range.

    8
    ILS

    10

    11

    Blk +8V +4V External Speed Adjust Chassis Gnd Screw

    Wht

    Actuator

    Battery

    Chassis Gnd Screw

    Magnetic Pick-up

    INSTALLATION DRAWINGS
    (DYNC 11020-300) Side Mounted Actuator Clockwise Rotation

    (DYNC 11020-000) Base Mounted Actuator Clockwise Rotation

    (DYNC 11024-000) Base Mounted Actuator Counterclockwise Rotation

    nc

    on H

    tr t

    ll o

    ed

    um c

    nt e ce n

    ly n

    is

    ri o

    al c

    ef

    re e

    or F
    Barber-Colman Company Aerospace & Power Controls Division DYNA Product Group 1354 Clifford Avenue P.O. Box 2940 Loves Park, IL 61132-2940 United States of America

    Telephone (815) 637-3000 Facsimile (815) 877-0150


    CAUTION As a safety measure, the engine should be equipped with an independent overspeed shutdown device in the event of failure which may render the governor inoperative.

    In Europe contact: Barber-Colman GmbH Am Neuen Rheinhafen 4, D-67346 Speyer, Germany Telephone 06232 29903, Facsimile 06232 299155 In Japan contact: Ranco Japan Ltd. Shiozaki Bldg. 7-1, 2-chome, Hirakawa-Cho, Chiyoda-Ku Tokyo 102, Japan Telephone 3261 4293, Facsimile 3264 4691 A Siebe Group Company

    NOTE Barber-Colman believes that all information provided herein is correct and reliable and reserves the right to update at any time. Barber-Colman does not assume any responsibility for its use unless otherwise expressly undertaken.

    F-22030-8

    You might also like