VOLVO COMPACT WHEEL LOADERS

L40B, L45B

More care. Built in.

BUILT TO WORK.

Meet your most valuable performer: the Volvo L40B and L45B. Built to work all day, every day, each offers ideal size and a wide range of attachments for unmatched versatility. Loaded with power, yet efficient to operate, you're going to enjoy a new standard of productivity and profitability.

Take control of your productivity For optimum traction in difficult terrain, the Volvo Model L40B and L45B feature 100% operator selectable differential locks in the front and rear axles helping all wheels turn with the same speed. The servo-controlled hydraulic control valve features a proven, double-acting design for smooth control of all movements. Independent hydraulic pumps with loadsensing control improve precision hydraulic control while extending the life of components and reducing fuel consumption. For effortless handling, the ergonomic joystick controls multiple functions: lift, lower, float, dig and dump, forward, neutral, reverse and differential locks. Giving you a needed lift Experience the performance of Volvo's TP Linkage system for high breakout force, superior parallel fork loading action and safe visibility throughout the entire lift range. Loading operations are quick and efficient with optimum lifting height and fast cycle times. The counterweight is bevelled on the lower side for ease of operation on extremely steep slopes or rough terrain.

Productivity starts with efficiency The low emission Volvo engine is not only high on power and output, it's low on fuel consumption for economical operation that increases profitability. A fuel filter and water separator protects the fuel-injection system. For maximum power and speed, enjoy automatic drive facility from a hydrostatic transmission that features an axial piston drive motor. The system's high pressure allows maximum speed without the need to shift and regardless of traction. Advantages include less wear and optimum performance in all drive modes. Loaded with versatility With a wide range of available Volvo attachments and a choice of two attachment carriers, the Volvo L40B and L45B deliver the versatility of an entire fleet of machines. Built of the finest quality and perfectly matched for your machine, genuine Volvo attachments help you take on any job. Both the TPV and TPZ attachment carriers make attachment hook-up quick and easy, right from the operators seat. Standard hydraulic couplings on the carriers allow use of numerous hydraulic tools and attachments for even more productivity.

Wide range of accessories available

Operator selectable differential locks provide optimal traction.

2 Separate hydraulic pumps provide fast cycle times.

Superb ground clearance, drive torque and traction. Patented Volvo loader linkage.

TOUGH WHERE IT COUNTS

You make money working, not down for repair. That's why the L40B and L45B are built strong and sturdy from the ground up to match high Volvo standards. When it's time for service, Volvo makes it fast and easy to get you back out there. We give you maximum uptime so you get maximum profits.

Volvo keeps you protected Demand Volvo quality for the toughest of jobs. The L40B and L45B feature superior frame stability from a durable articulating/oscillating joint. Navigate over difficult, uneven terrain with confidence, comfort and ease with smooth steering, excellent power distribution and high ground contact. Special tyres do not influence the steering angle or oscillation angle. For high quality performance and long life, the oscillating joint features large, sealed hinge bushings and surfacehardened pins. A special shock absorber stabilizes oscillating movements for greater operator comfort. For maximum protection from damage, expensive downtime and repair, hydraulic hoses and electrical cables are routed through the central articulating/oscillating joint to the main control valve. The standard water separator prevents damage in injection pumps and injection nozzles for long life.

Your access to greater uptime Easy access makes service quick and simple. All important service points, such as the radiator, battery and all filters, are grouped within easy reach and fully protected under the engine hood. Perform quick service checks with an engine oil dipstick and a hydraulic oil sight glass. Standard, easyaccess test ports on all hydraulic components make maintenance fast and easy. There's excellent side engine access to the double filter element located in the hydraulic tank. The air filter is not only easy to access and maintain, there's also an indicator light for the filter in the cab. To help increase availability and reduce operating costs, oil and filter service intervals are long. More quality. Built in. Look to the Volvo L40B and L45B for a compact wheel loader that stands up to today's jobsite conditions. The rugged, high-strength steel frame design offers secure mounting of components for durability and performance. Each order is assembled using the latest, wellmatched components - designed and built together from the ground up to guarantee the highest quality and reliability. From fabrication to finished product, every Volvo L40B and L45B must meet Volvo's demanding standards.

Articulated frame for work in tight areas.

4 Non stop operation.

Volvo durability. Easy service access to the engine department.

Volvo quality and sturdiness.

GET COMFORTABLE WITH VOLVO SAFETY.

For an operator, your cab is your office. In the Volvo L40B and L45B, you've got the best seat on the jobsite. You're surrounded in comfort: with plenty of room and everything right where you want it. You can also relax, knowing you've got Volvo safety. Now that's the smart way to work.

Safe operation for everyone A safe jobsite starts with the operator. The L40B and L45B provide excellent visibility around the entire machine. Cab windows are large, offering a very large glazed surface area on all four sides. Excellent visibility improves safety for the operator, nearby objects and those working in the vicinity of the machine. The boom design with TP Linkage system and a quick coupler provide improved visibility down to the attachment for a reduced risk of damage. The central electrical board, components, relays and fuses are located in a protected, safe location that's easy to check and access. The wiring harness is fixed to the chassis, housed in a protected, flexible conduit. This protects wiring against wear caused by vibrations, dust and heat. That means safer electronics, improved reliability and higher residual value.

Work in comfort The Volvo comfort cab offers the finest work environment. The operator station has plenty of comfortable features including one of the most spacious cabs in its category. Operators of all heights and sizes will feel at ease for fatigue-free operation and greater productivity. Enjoy efficient climate control with comfortable heating, demisting and defrosting. Air conditioning and the high-capacity, three-phase heating fan allow yearround productivity. Seven well-placed adjustable fresh air blowers keep you comfortable with fresh, filtered outside air. Theres plenty of floor space and storage space. A large, lockable storage compartment offers a safe location for personal items such as a cell phone or other valuables. You're safe with Volvo Entering and exiting the cab is quick, safe and easy from both sides of the machine. You always have three points of contact, climbing the large anti-slip steps and gripping the wide, ergonomic handrails. All cabs are ROPS/FOPS certified for optimum safety against falling objects or in case of accidental roll-over. Quiet cab sound proofing meets cab sound regulations for a comfortable environment and fatiguefree operation. To protect against vandalism, all critical components, such as oil fills, batteries and maintenance points, are located under the lockable engine hood.

ROPS/TOPS certified cab for safe operation.

Ergonomic control for multiple functions.

6 Optional protection package.

Easy view instrument panel. Spacious cab offers comfort and visibility

SPECIFICATIONS
Engine Volvo in-line 4-cylinder, 4 stroke, direct injection diesel engine with turbocharging, water cooled. Air cleaning: 1. Pre cleaner with ejector / 2. Paper filter with indicator in cab / 3. Safety filter
L40B Engine Gross power @ SAEJ1995 Net power @ SAEJ1349 - DIN ISO 1585 Max. torque @ SAEJ1349 net - DIN ISO 1585 Cubic capacity Bore Stroke D5DCAE2 2100 r/min 71 kW - 97 hp 2100 r/min 69 kW - 94 hp 1400 r/min 375 Nm 4,76 l 108 mm 130 mm L45B D5DCBE2 2100 r/min 75 kW - 102 hp 2100 r/min 73 kW - 99 hp 1400 r/min 450Nm 4,76 l 108 mm 130 mm

Braking system Service brake: reliable, dual braking system, disc brake hydraulically actuated via pump accumulator, acting upon all four wheels. 1. Wear-free, hydrostatic inching brake / 2. Central disc brake, actuated via inch/brake pedal. First stage of pedal application actuates the inching facility, the last third of pedal application applies the central disc brake. / 3. High speed version Inch/brake pedal and additional pedal both acting on the oil immersed multi-disk brake. Parking brake: central disc brake, acting upon all four wheels. Hydraulic system Load sensing hydraulic system with self-controlling power distribution. Thermostatically controlled oil circuit with integrated cooling system. Hydraulic control valve: Servo-controlled, double acting control valve three spool system, with primary and secondary pressure valves. 1. Lifting function / 2. Tilting function / 3. Additional function for hydraulic QC, Unlock, neutral, lock. Preparation for operating hydraulic attachments with this function is available as an option. Hydraulic oil filter: Combined suction and return-filtration cartridge with a 10 m filter. The filter can be replaced without emptying the hydraulic oil tank. Axial piston pump
L40B Flow @ engine rpm Relief valve pressure 106 l/min 2100 r/min 23 MPa L45B 106 l/min 2100 r/min 25 MPa

Electrical system
L40B Rated voltage Battery voltage Battery capacity Alternator rating Starter motor output 24 V 2 x 12 V 2 x 74 Ah 1540/55 W/A 4,0 kW L45B 24 V 2 x 12 V 2 x 74 Ah 1540/55 W/A 4,0 kW

Drivetrain Transmission: hydrostatic transmission, full power shift under load, both when changing direction (forward and reverse) and between ranges. Maximum drawbar force can be achieved in all ranges. Inch/brake pedal for variable machine speed control and power transfer to bucket hydraulics at constant engine rpm. Multifunction lever for change of direction, differential lock and use of the servo-control.
L40B Oscillation at wheel, max. Track Angle of oscillation 310 mm 1760 mm 10 15.5-25 12 x 25 L45B 310 mm 1760 mm 10 15.5-25 12 x 25

Steering Load sensing hydrostatic steering. Central articulating-oscillating joint with damping effect. Steering pump: gear-type pump controlled by priority valve. Steering cylinder: 2 double-acting steering cylinders. Steering: Angle of articulation Steering pump:
Flow @ engine rpm Relief valve pressure L40B 43,5 l/min 2100 r/min 17 MPa L45B 43,5 l/min 2100 r/min 17 MPa L40B 40 L45B 40

Tyres:
Size Rim

Differential locks: hydraulically actuated 100% differential locks in both axles. Frame: solid front and rear frame, robot-welded. Articulatingoscillating joint for optimum manoeuvrability and traction.
Speed, max.: 1st range forward/reverse 2nd range forward/reverse 3rd range forward/reverse Standard 6,0 km/h 20,0 km/h High Speed 6,0 km/h 13,0 km/h 35,0 km/h

Linkage
L40B Linkage system Lift cylinders Tilt cylinders Lift time (loaded) Lowering time (empty) Dump time Crowd time TP 2 1 6,0 s 5,0 s 1,5 s 1,8 s L45B TP 2 1 6,0 s 5,0 s 1,5 s 1,8 s

Service fill capacities

L40B Engine Fuel tank Front axle, total Rear axle, incl. drop-box Hydraulic tank, incl. hydraulic system 14,0 l 130,0 l 7,9 l 9,9 l 120,0 l L45B 14,0 l 130,0 l 7,9 l 9,9 l 120,0 l

Noise levels The L40B conforms to the 2006 European Machine Directive Noise Level (2000/14/CE) of 102 dB(A) for this class of machine. The L45B conforms to the 2006 European Machine Directive Noise Level (2000/14/CE) of 102 dB(A) for this class of machine.

SPECIFICATIONS L40B

dd

Data according to bucket type L40B with TP-linkage, TPZ attachment carrier and 15.5-25 tyres Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height, 45 M Reach at max. height N Reach, max. Operating weight Data according to bucket type L40B with TP-linkage, TPV attachment carrier and 15.5-25 tyres Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height, 45 M Reach at max. height N Reach, max. Operating weight Data with Loading Fork Centre of gravity 500 mm Tipping load, full turn (ISO / DIS) Payload according to EN 474-3, 60/80% Payload 80%, transport position, 40 full turn m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg

General Purpose

Light Material

4-in-1

High-Tip

L40B with TP-linkage and 15.5-25 tyres B C D F G G J K O P R S 4900 mm 2400 mm 415 mm 2930 mm 1080 mm 1020 mm 3300 mm 3555 mm 57 45 50 68 255 mm 1760 mm 2160 mm 3240 mm 3310 mm 4440 mm 2220 mm 40 TPZ QC TPV QC TPZ QC TPV QC

1,3 1800 5450 4800 70,0 66,0 5795 4490 2250 9520 165 2770 800 1560 7820

1,4 1600 5400 4750 69,0 62,5 5835 4550 2250 9550 165 2745 825 1585 7830

1,6 1400 5300 4700 68,0 57,5 5910 4620 2250 9590 165 2685 870 1630 7820

2,0 1100 5150 4550 65,5 47,5 6050 4740 2250 9700 160 2550 995 1755 7860

1,1 1900 5150 4550 67,0 70,5 5740 4510 2250 9500 150 2790 720 1480 8010 4-in-1

2,0 900 4500 3950 57,0 6400 5490 2250 9890 155 4010 1340 2440 8290 High-Tip

General Purpose

Light Material

1,2 1900 5250 4650 65,5 61,0 5850 4520 2250 9550 160 2740 845 1605 7900

1,4 1600 5200 4600 64,5 56,0 5930 4610 2250 9590 160 2680 890 1650 7930

1,6 1400 5150 4550 63,5 51,5 6000 4680 2250 9630 160 2620 940 1700 7920

2,0 1100 5000 4400 61,0 43,5 6190 4810 2250 9750 155 2490 1060 1820 7960 TPZ

1,1 1900 4950 4350 61,5 60,0 5860 4540 2250 9550 155 2690 805 1565 8080

2,0 900 4200 3700 52,0 6530 5580 2250 9990 170 4110 1435 2570 8390 TPV

U X Y Z Z a2 a3 a4

kg kg kg

4050 2400/3200 4000

3750 2250/3000 3700

SPECIFICATIONS L45B

dd

Data according to bucket type L45B with TP-linkage, TPZ attachment carrier and 15.5-25 tyres Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height, 45 M Reach at max. height N Reach, max. Operating weight Data according to bucket type L45B with TP-linkage, TPV attachment carrier and 15.5-25 tyres Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height, 45 M Reach at max. height N Reach, max. Operating weight Data with Loading Fork Centre of gravity 500 mm Tipping load, full turn (ISO / DIS) Payload according to EN 474-3, 60/80% Payload 80%, transport position, 40 full turn m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg

General Purpose

Light Material

4-in-1

High-Tip

L45B with TP-linkage and 15.5-25 tyres B C D F G G J K O P R S 5030 mm 2450 mm 410 mm 2930 mm 1030 mm 970 mm 3395 mm 3650 mm 57 45 50 68 255 mm 1760 mm 2160 mm 3330 mm 3400 mm 4520 mm 2270 mm 40 TPZ QC TPV QC TPZ QC TPV QC

1,5 1800 6200 5500 77,0 66,0 6000 4690 2250 9735 200 2810 830 1650 8330

1,6 1600 6100 5400 75,5 63,0 6040 4725 2250 9760 200 2780 860 1675 8360

2,0 1300 5900 5250 73,5 49,5 6230 4840 2250 9880 195 2645 990 1805 8340

2,5 900 5750 5100 71,5 43,5 6380 5050 2250 9980 195 2535 1085 1900 8440

1,3 1900 5800 5100 72,5 60,5 6080 4560 2250 9780 190 2735 860 1675 8510 4-in-1

2,3 1000 5250 4650 64,5 6530 5710 2250 10080 195 4110 1330 2490 8810 High-Tip

General Purpose

Light Material

1,4 1800 5900 5250 72,6 62,0 6060 4700 2250 9770 200 2780 895 1710 8400

1,6 1600 5800 5150 71,2 57,3 6130 4770 2250 9820 200 2720 935 1750 8450

2,0 1200 5650 5000 69,5 48,1 6320 4900 2250 9940 190 2580 1060 1875 8430

2,5 900 5500 4850 67,5 42,8 6470 5110 2250 10040 190 2470 1160 1975 8520 TPZ

1,2 1900 5500 4850 67,5 53,5 6210 4620 2250 9860 195 2640 940 1760 8620

2,3 900 4900 4350 60,0 6660 6170 2250 10100 210 4190 1430 2620 8910 TPV

U X Y Z Z a2 a3 a4

kg kg kg

4630 2750/3700 4000

4375 2625/3500 4000

10

STANDARD EQUIPMENT Engine

Diesel engine, direct fuel injection Extra fuel filter Cold start aid Dry-type air filter

Electrical system
Alternator 55 A Lighting: Main head lights (halogen) full/dipped/asymmetrical Working lights (2 front/1 rear right) Parking lights Rear lights Brake lights Direction indicators Hazard warning lights Reversing lights Cab lighting Instrumentation & controls: Multi-function lever 24 Volt accessories socket Horn Hazard warning switch Safety start Electronic Information System: Analog LED-information for: Fuel level Engine temperature Drive system oil temperature LED-illuminated symbols (colour-coded) for: Direction (forward/reverse) Indicators (left/right) Pre-heater Main beam Differential locks Boom arm suspension system (option) Loading fork operation (option)

LED-illuminated symbols (red) with acoustic signal for: Parking brake Air filter restriction Drive system oil temperature Engine temperature Engine oil pressure Battery charging Return filter Touch pad with symbols and integrated LEDs for: Parking lights Working lights (front/rear) Windscreen wiper (rear) Rotating beacon (option) Boom arm suspension system on/off (option) Locking and activation of Volvoattachment carrier (option) Activation of multi-function lever for directional change Digital LED display activated by dual function keys for: Entry and retrieval of operating information Anti-theft function control

Sliding window in the left door Door stops External rear view mirrors (right/left).

Cab, Interior
4-way adjustable operator's seat Adjustable steering column Seat belt Sunvisor Heater with air-filter and defroster (front/rear) Cab ventilation Preparation for an optional airconditioner Storage box in the cab

Working Equipment
Automatic bucket leveller Hydraulic quick-change attachment carrier

Carriage Body
Fenders and mudguards, (front/rear) Lockable engine hood Lockable fuel-tank cap Vertical exhaust Towing device Lifting eyes

Drivetrain
Hydrostatic drive Operator-selected 100% differential locks Tyres 15.5-25

International Standards for Machines and Production

Quality: DIN/ISO 9001 Safety: CE - Criteron Machine guide-lines 98/37/EC ROPS ISO 3471 FOPS ISO 3449 Operating weight ISO 7131 Tipping load / Payload: ISO/DIS 14397-1 EMV (Electromagnetic Compatibility) 89/336/EEC plus supplement Environment: DIN/ISO 14001 Sound regulation: 2000/14/EC

Hydraulic system
Load-Sensing Hydraulics Axial piston pump Control valve three-spool system 3rd hydraulic circuit

Cab, Exterior
ROPS/FOPS-cab with flexible mountings Walk-through cab Lockable doors All-round tinted safety glass Windscreen wiper (front/rear) Windscreen washer (front/rear)

OPTIONAL EQUIPMENT Engine Equipment

Pre-heater Pre cleaner air filter (Turbo II) Oilbath air filter Exhaust particle filter

Cab
Handthrottle Hand control inch valve Airconditioner Radio Working light (1 rear, left) Air suspension operator's seat

Safety
Anti-theft system Protective guards for: Main head lights Working lights Rear lights Rotating beacon Audible reverse alarm

Hydraulics
Hydraulic couplings for 3rd hydraulic circuit 4th hydraulic circuit

Working Equipment
Boom arm suspension system Attachment carrier TPV

Environment
Biodegradable hydraulic oil Low-noise kit

11

Volvo Construction Equipment is different. It's designed, built and supported in a different way. That difference comes from an engineering heritage of over 170 years. A heritage of thinking first about the people who actually use the machines. About how to help them be safer, more comfortable, more productive. About the environment we all share. The result of that thinking is a growing range of machines and a global support network dedicated to helping you do more. People around the world are proud to use Volvo. And we're proud of what makes Volvo different More care. Built in.

All products are not available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.

Construction Equipment www.volvoce.com

Ref No. 21 2 430 5593 Printed in Sweden Volvo, Belley

English 2006.12 CWL