VOLVO COMPACT WHEEL LOADERS

L30B PRO, L35B PRO

More care. Built in.

TAKING PERFORMANCE, VERSATILITY TO A NEW LEVEL.

The Volvo L30B Pro and L35B Pro Compact Wheel Loaders are packed with performance to give you a highly productive, highly versatile machine. Both models allow you to do more with less effort. Test one and youll discover a compact wheel loader that brings efficiency and performance to a new level.
The L30B Pro and L35B Pro have efficient direct injection Volvo diesel motors that are high on performance output and low on fuel consumption, saving you money on every job. And while youll be able to move plenty of earth, you wont be a disruptive environmental force because of the low emission exhaust/gas ratio that meets new ISO 8178 standards. Easy on, easy off differential locks keep the operator in control at all times. One hundred percent operator selectable front and rear axle differential locks give optimum traction on adverse terrain and help keep all wheels turning at the same speed. The separate working and steering hydraulic pumps raise performance and provide faster work cycles. Quick steering actions wont impact performance because the independent hydraulic system always maintains the same speed when working and steering at the same time. The smoothness of the hydraulic control valve provides precise control during all hydraulic operations. Youll also be able to go where other units cant because of heavy-duty portal axles that feature superb ground clearance. Super strong front and rear axles transmit optimal drive torque to the wheels, providing increased traction in the roughest conditions. Both units have a highly agile frame that has an articulating/oscillating joint, helping you reach tight areas. The compensation provided by the front and rear frame oscillation helps the operator enjoy comfort, stability and superior steering on all surfaces, including uneven terrain. The beveled lower side counterweight allows both units to operate up or down extremely steep slopes, giving the operator use of a versatile machine built for a variety of job sites and conditions.

Big on output, low on fuel to save money on every job.

Operator selectable differential locks provide optimal traction.

2 Separate hydraulic pumps provide fast cycle times.

Superb ground clearance, drive torque and traction. Control valve for smooth, precise hydraulic control.

Articulating frame for work in tight areas. Versatile machine operates on steep slopes.

THE ABILITY TO COMFORTABLY TAKE ON ANY JOB.

With an extensive selection of attachments available, the Model L30B Pro and Model L35B Pro can help you to do more than you ever thought possible. Youll be able to tackle the various jobs in the comfort and safety of a deluxe cab that makes your work much easier and your workday much shorter.
Changing attachments is fast and easy with the standard hydraulic quick coupler that lets you get connected right from the operators seat. And there are a wide variety of available attachments, including forks, buckets, material handling arm, sweeper and a snowplow. There are also adapters available which allow attachments from other manufacturers to fit on the Z attachment carrier, providing even greater versatility. Unleash the machines power and potential with the Z-bar loader linkage, which features exceptional breakout force and parallel lift-arm action. Dual lift cylinders boost power for optimum lift height and fast cycle times. And because the Z-bar loader linkage is long and narrow, the operator always has a clear view of the loading fork, this is also the case for the TP-loader linkage available on the L35B pro. Both units feature narrow ROPS columns, wide windows and a rounded rear section to provide the operator with 360 of visibility to simplify operation and enhance safety. 4 in 1 bucket. The cab features large anti-slip steps and handrails for safe access from both sides of the machine so the operator always has three points of contact. Inside the cab, youll find one of the most spacious operator stations in its category, providing exceptional comfort for increased productivity. Easy-to-read controls put you in command of an operator-friendly workhorse. And youll be able to instantly monitor all functions because of wellpositioned control gauges. An ergonomic joystick provides effortless handling of multiple functions, including lift, lower, dig, dump, drive direction and differential locks. The enclosed, cab features climate control systems, and an adjustable operators seat and steering column which help reduce fatigue. A wide variety of attachments available including material handling arm. Hydraulic quick coupler for fast attachment changes.

4 Sweeper.

Easy-to-read dashboard puts you in control. Spacious cab offers comfort and visibility. Z-bar linkage provides excellent visibility of attachments. Anti-slip steps provide easy, safe cab access. Ergonomic control for multiple functions.

ENDURING QUALITY THATS ALWAYS EASY TO MAINTAIN.

Along with performance and versatility, the Volvo L30B Pro and L35B Pro Compact Wheel Loaders provide superb quality and serviceability. More care and quality is built in for maximum uptime. When repairs are needed, both units offer easy-access serviceability to get you back to work faster.

Every Volvo machine features high quality assembly and quality control and because Volvo uses up-to-date products from suppliers, youre guaranteed the highest quality and reliability. The durable bucket teeth are built tougher than ever for improved digging ability. You can handle the toughest workloads and feel the power of the direct injection diesel engine and sturdy robot-welded frame. Adjustable fenders give you added flexibility and wheel coverage, regardless of tire size. Both units offer easy access for routine or extensive service. Under the lift-up bonnet, youll find transverse-mounted service points and simplified access to the air, oil, fuel and hydraulic filters. Longer service intervals help reduce maintenance costs and keep you on the job, instead of under the engine hood. Both machines feature long-life timing belts and a long-lasting standard water separator to ensure optimal performance, minimal wear and maximum uptime for the life of the machine. Daily servicing is easy with ground-level access for fuel fill and grease points.

The hydraulic hoses and electrical cables are guided through the middle of the central articulation/oscillation joint for maximum protection. This superior design helps avoid expensive machine downtime and repairs. The units are also built for safety, with ROPS/FOPS certified cabs, seatbelts, hydrostatic braking system, front and rear work lights and a sound insulated hood that protects operator hearing. It all adds up to a safer working environment for both the operator and those working near the unit.

Protected hoses and cables to avoid expensive downtime.

Long service intervals and easy-access filters.

Quality components and construction ensure long life.

The bucket teeth provide quality and power. Easy service access to the engine compartment.

Long lasting hydraulic filters, to reduce costs. ROPS/FOPS certified cab for safe operation.

SPECIFICATIONS
Engine Volvo in-line 4-cylinder, 4 stroke, direct injection diesel engine with turbocharging, oil/air cooled. Air cleaning: 1. Paper filter with indicator in cab / 2. Safety filter
L30B Pro Engine Gross power @ SAE J1995 Net power @ SAE J1349 - DIN ISO 1585 Max torque @ SAE J1995 netto DIN ISO 1585 Cubic capacity D3DCDE2 2300 r/min 52 kW - 71 hp 2300 r/min 50 kW - 68 hp 1600 r/min 241 Nm 241 Nm 3,11 l L35B Pro D3DCEE2 2600 r/min 57 kW - 77 hp 2600 r/min 55 kW - 75 hp 1600 r/min 241 Nm 241 Nm 3,11 l Flow @ engine Relief valve pressure

Steering system Hydrostatic steering. Central articulating-ocillating joint with damping effect. Angle of articulation 40 Steering pump/gear-type pump
L30B Pro 18,5 MPa L35B Pro 18,5 MPa 25 l/min - 2300 r/min 29 l/min - 2600 r/min

Cab Instrumentation: All important information is centrally located in the operators field of vision.

Electrical system
L30B Pro Voltage/Battery capacity Alternator rating Starter motor output 12 V - 88 Ah 1120 - 80 W/A 2,2 kW L35B Pro 12 V - 88 Ah 1120 - 80 W/A 2,2 kW

Drivetrain Transmission: hydrostatic transmission, full power shift under load, both when changing direction (forward and reverse) and between ranges. Maximum drawbar force can be achieved in all ranges. Inch/brake pedal for variable machine speed control and power transfer to bucket hydraulics at constant engine rpm. Multi-function lever for change of direction, differential lock and use of the servo-control. Axles: all-wheel drive by two rigid portal axles. Differential locks: hydraulically actuated 100% differential locks in both axles. Frame: solid front and rear frame, robot-welded. Articulating oscillating joint for optimum manoeuvrability and traction.
L30B Pro Oscillation at wheel, max. Track Angle of oscillation Tire /Rim size Maximum speed 1st range forward/reverse 2nd range forward/reverse 250 mm 1482 mm 10 365/80R2 /11x20 (Standard) 6 km/h 20 km/h L35B Pro 270 mm 1532 mm 10 405/70R2 /13x20 (High Speed) 8 km/h 30 km/h

Hydraulic system Thermostatically controlled oil circuit with integrated cooling system. Hydraulic control valve: Servo-controlled, double acting control valve with three spool system, with primary and secondary pressure valves. 1. Lifting function / 2. Tilting function / 3. Additional function for hydraulic QC. Unlock, neutral, lock. Preparation for operating hydraulic attachments with this function is available as an option. Hydraulic oil filter: Combined suction and return-filtration cartridge with a 10 m filter. The filter can be replaced without emptying the hydraulic oil tank. Hydraulic pump / gear type-pump
L30B Pro Flow @ engine Relief valve pressure 25 MPa L35B Pro 25 MPa 55 l/min - 2300 r/min 73 l/min - 2600 r/min

Linkage Powerful Z-bar loader-linkage. L35BPro is also available with TP linkage.

L30B Pro Lift cylinders / Tilt cylinders 2/1 Lift time (loaded) Lowering time (empty) Dump time Crowd time 6,5 s 3,5 s 1,5 s 2,0 s L35B Pro 2/1 5,5 s 3,5 s 1,2 s 1,5 s

Brake system Service brake: reliable dual braking system, acting upon all four wheels. 1. Wear-free, hydrostatic inching brake 2. Central friction brake, actuated via inch/brake pedal. First stage of pedal application actuates the inching facility, the last third of pedal application applies the central friction brake. Parking brake: central drum brake, acting upon all four wheels.

Capacities
L30B Pro Engine Fuel tank Front axle Rear axle, incl. drop-box Hydraulic tank, incl. hydraulic system 10,5 l 86,0 l 12,2 l 13,5 l 65,0 l L35B Pro 10,5 l 86,0 l 12,2 l 13,5 l 65,0 l

SPECIFICATIONS - L30B PRO

Data according to bucket type L30B Pro with Z-bar linkage, Z-attachment carrier and 365/80 R20 tires Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height M Reach at max. height N Reach, max. Operating weight m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg

General Purpose + 1,0 1900 4350 3850 57,0 61,0 5140 4220 1900 8490 50 2580 680 1455 5500 1,1 1700 4250 3800 55,5 53,0 5240 4260 1900 8550 50 2505 745 1525 5520

4 in 1

L30B Pro with Z-bar linkage, Z-attachment carrier and 365/80 R20 tires B C D F G J K O P R S U X Y Z a2 4340 2150 600 2740 900 3060 3260 70 45 50 140 200 1482 1835 2960 3900 2030 40 mm mm mm mm mm mm mm mm mm mm mm mm mm

0,9 1900 4000 3550 53,0 53,0 5240 4130 1900 8560 55 2480 710 1490 5710

Data with loading fork Centre of gravity 500 mm Tipping load, full turn (ISO / DIS) Payload according to EN 474-3, 60/80% Payload 80%, transport position, 40 full turn kg kg kg 3000 1800/2400 2500

a3 a4

SPECIFICATIONS - L35B PRO

Data according to bucket type L35B Pro with Z-bar linkage, Z-attachment carrier and 405/70 R20 tires Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height M Reach at max. height N Reach, max. Operating weight m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg

General Purpose + 1,2 1800 4950 4350 61,5 60,5 5280 4320 2100 8760 95 2670 750 1570 6250 1,2 1700 4750 4200 59,5 52,5 5380 4340 2000 8730 95 2590 810 1630 6260

4 in 1

L35B Pro with Z-bar linkage, Z-attachment carrier and 405/70 R20 tires B C D F G J K O P R S U X Y Z a2 4485 2150 610 2745 900 3145 3345 66 45 50 135 200 1532 1932 3050 3960 1980 40 mm mm mm mm mm mm mm mm mm mm mm mm mm

1,0 1900 4450 3950 58,5 52,5 5380 4260 2000 8740 100 2570 780 1600 6440

Data with loading fork Centre of gravity 500 mm Tipping load, full turn (ISO / DIS) Payload according to EN 474-3, 60/80% Payload 80%, transport position, 40 full turn kg kg kg

FEM II

FEM III

a3 a4

3340 2000/2500 2500

3300 2000/2600 2800

10

SPECIFICATIONS - L35B PRO TPZ

Data according to bucket type L35B Pro with TP- linkage, Z-attachment carrier and 405/70 R20 tires Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height M Reach at max. height N Reach, max. Operating weight m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg

General Purpose + 1,0 1800 4200 3700 57,0 62,5 5280 4290 2000 8670 90 2610 725 1545 6100 1,2 1500 4150 3650 55,5 54,5 5380 4330 2000 8730 90 2535 785 1605 6120

4 in 1

L35B Pro with TP linkage, Z-attachment carrier and 405/70 R20 tires B C D F G J K O P R S U X Y Z a2 4455 2150 580 2715 900 3100 3350 63 45 50 58 250 1532 1932 3020 3960 1980 40 mm mm mm mm mm mm mm mm mm mm mm mm mm

0,9 1900 3900 3450 54,0 59,0 5320 4200 2000 8700 90 2560 715 1535 6285

Data with loading fork Centre of gravity 500 mm Tipping load, full turn (ISO / DIS) Payload according to EN 474-3, 60/80% Payload 80%, transport position, 40 full turn kg kg kg 2930 1750/2300 2500

a3 a4

11

SPECIFICATIONS - L35B PRO TPV

Data according to bucket type L35B Pro with TP- linkage, V-attachment carrier and 405/70 R20 tires Capacity heaped Material density Static tipping load, straight (ISO / DIS) Static tipping load, full turn 40 (ISO / DIS) Hydraulic lifting capacity, max. Breakout force A Total length L Lift height, max. V Bucket width a1 Clearance circle T Digging depth H Dump height M Reach at max. height N Reach, max. Operating weight m3 kg/m3 kg kg kN kN mm mm mm mm mm mm mm mm kg

General Purpose + 1,0 1800 4500 3600 52,0 54,5 5380 4250 2000 8730 85 2550 800 1620 6200 1,2 1400 3900 3450 50,5 48,5 5480 4390 2000 8800 85 2470 855 1675 6240

4 in 1

L35B Pro with TP linkage, V-attachment carrier and 405/70 R20 tires B C D F G J K O P R S U X Y Z a2 4455 2150 580 2715 850 3100 3350 63 45 50 58 250 1532 1932 3100 3960 1980 40 mm mm mm mm mm mm mm mm mm mm mm mm mm

0,9 1800 3750 3300 49,0 51,5 5415 4260 2000 8760 85 2490 785 1600 6390

Data with loading fork Centre of gravity 500 mm Tipping load, full turn (ISO / DIS) Payload according to EN 474-3, 60/80% Payload 80%, transport position, 40 full turn kg kg kg 2750 1650/2200 2500

a3 a4

12

STANDARD EQUIPMENT Engine

Diesel engine, direct fuel injection. Extra fuel filter. Cold start aid. Dry-type air filter.

Electrical system
L30B Pro : Alternator 80 A. L35B Pro : Alternator 80 A. Main head lights (halogen) full/dipped/asymmetrical. Working lights (2 front/1 rear, right). Parking lights. Rear lights. Brake lights. Direction indicators. Hazard warning lights. Reversing lights. Cab lighting.

Engine temperature Engine oil pressure Battery charging Return filter. Touch pad with symbols and integrated LEDs for: Parking lights Working lights (front/rear) Windscreen wiper (rear) Rotating beacon Boom suspension system Locking and activation of Volvoattachment carrier (TPV) Activation of directional change on joystick. Digital LED display activated by dual function keys for: Entry and retrieval of operating information Anti-theft function control.

Sunvisor. Heater with air-filter and defroster (front/rear). Cab ventilation. Preparation for an optional air-conditioner. Storage box in the cab.

Hydraulic system
Gear-type pump. Control valve three-spool system. 3rd hydraulic circuit.

Working Equipment
Bucket level indicator. Hydraulic quick-change attachment carrier.

Carriage Body
Fenders front/rear. Lockable engine hood. Vertical exhaust. Towing device. Lifting eyes.

Instrumentation & controls:

Multi-function lever 12 Volt accessories socket Horn Hazard warning switch Safety start. Analog LED-information for: Fuel level Engine temperature Drive system oil temperature. LED-illuminated symbols (colour-coded) for: Direction (forward/reverse) Indicators (left/right) Pre-heater Main beam Differential locks. LED-illuminated symbols (red) with acoustic signal for: Parking brake Air filter restriction Drive system oil temperature

Drivetrain
Hydrostatic drive. Operator-selected 100% differential locks Tires: L30B Pro 365/80 R20 L35B Pro 405/70 R20.

Service and maintenance

Tool kit. Wheel nut wrench.

International Standards for Machines and Production

Quality: DIN/ISO 9001. Safety: CE - Criteron. Machine guide-lines 98/37/EC ROPS ISO 3471 FOPS ISO 3449. Operating weight ISO 7131. Tipping load / Payload: ISO / DIS 14397-1. EMV (ElectromagneticCompatibility) 89/336/EEC plus supplement. Environment: DIN/ISO 14001. Sound regulation: 2000/14/EC. German environmental seal low noise RAL - UZ 53 (20 km/h version).

Cab Exterior
ROPS/FOPS-cab with flexible mountings. Walk-through cab. Lockable doors. All-round tinted safety glass. Windscreen wiper (front/rear). Windscreen washer (front/rear). Sliding window in the left door. Door stops. External rear view mirrors (right/left).

Cab Interior
4-way adjustable operators seat. Adjustable steering column. Seat belt.

OPTIONAL EQUIPMENT (Standard on certain markets) Engine equipment

Pre-heater. Pre cleaner air filter (Turbo II). Oilbath air filter. Exhaust particle filter.

Cab
Handthrottle. Hand control inch valve. Airconditioner. Radio. Working light (1 rear, left). Air suspension operators seat.

Environment
Initial filling of biodegradable hydraulic oil. Low noise kit (L30B Pro, 30 km/h version).

Safety
Anti-theft system. Protective guards for: Main head lights Working lights Rear lights. Rotating beacon. Audible reverse alarm.

Hydraulic system
Hydraulic coupler for 3rd hydraulic circuit. 4th hydraulic circuit. Additional pump.

13

Volvo Construction Equipment is different. Its designed, built and supported in a different way. That difference comes from an engineering heritage of over 170 years. A heritage of thinking first about the people who actually use the machines. About how to help them be safer, more comfortable, more productive. About the environment we all share. The result of that thinking is a growing range of machines and a global support network dedicated to helping you do more. People around the world are proud to use Volvo. And were proud of what makes Volvo different More care. Built in.

All products are not available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.

Construction Equipment www.volvoce.com

Ref. No. 21 3 430 5588 Printed in Sweden Volvo, Konz

English 2006.12 CWL