Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Cardox-Blockage Removal System

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

8l00kk0f 0lfkk|k0 8Y81fN

High pressure breuking system


[or the cement muking inJustry






MAXIMISE YOUR PRODUCTION


In cement production, there are plenty of places in you processing lines that are
prone to rings, chokes and build-ups. Why jeopardise your bottom line every time you
have to shut down to clear the blockage? CARDOX is the fastest, safest and most
efficient way to keep your production flowing...day, after day, after day.



FAST & EFFICIENT


Cardox can quickly remove blockages and build-ups and restore plant production to
optimum levels... with no need to sit through an extended shut down while the
equipment cools. Cardox can be used in ALL areas of the processing lines at
operating temperatures.

Unlike airblasters where cement plants complain of ineffectiveness and report losses
of efficiency of up to 75%, using Cardox there is NO loss in efficiency! Each time you
use a Cardox Tube you are guaranteed maximum pressure to remove the build-up
and with tubes having a working life of over 15 years, maximum efficiency is
achieved over that period.

With a safe and powerful carbon dioxide blast, one quick Cardox Tube can remove
tons of build up. Three or four Tubes and you're back up to running at full capacity,
with little, or no down time, no added cost and no time to come back up to full
temperature.




Before: Opening inspection
holes reveals build-up of
cement.


During: Cardox Tube is inserted
into the build-up through special
sockets.


After: In seconds the Cardox
Tube is activated and removed
to reveal the kiln running at full
production.


SAFE OPERATION





Fully approved by the UK Health & Safety Executive.


Cardox is safely used from the outside of all areas of the processing line. Since
workers do not have to enter the kiln or any part of the production line, there is no
danger of exposure to heat or contaminated air, and there is no danger of loosened
material falling on your employees, which may harm or even bury them.

The Cardox tube is secured in a sealed coupler assembly. This means that you
operators are not exposed to flying debris - unlike water injection... or in danger of
being too close to the blast area - as with shot gun methods. Plant personnel operate
from a safe distance whilst the Cardox Tube does the work.

No other method of clearing build-ups in your production line is safer, easier or more
cost effective than the Cardox Blockage Clearing System!



LOW COST



Other ring or blockage removal operations, such as sending workers inside, may take
as long as eight days and up to thirty workers and involves shutting down the kiln and
allowing it to cool off. This wastes time and of course money.

The Cardox System can have the problem fixed in a matter of hours, requiring only
one or two workers.

Compared to manual cleaning techniques or plant shut downs the Cardox Blockage
Clearing System can typically pay for itself in a single application.

Many cement plants are beginning to realise just how costly the day to day running
costs of airblasters can be! Add on the high installation costs, the high equipment
costs and indeed the maintenance costs required with airblasters and it is no wonder
CARDOX is becoming known as the most cost effective method of removing
blockages and build-ups.









HOW IT WORKS


Cardox consists of a high strength reusable steel tube filled
with a liquid carbon dioxide, a chemical heater and a rupture
disc. When energised by the application of a small electrical
charge, the chemical heater instantly converts the liquid
carbon dioxide to a gas. This conversation expands the CO2
volume and builds up pressure inside the tube to burst. This
releases the CO2 - now 600 times the original volume -
through a special discharge nozzle to create a powerful
heaving force, at pressures up to 40,000psi (3,000bar) Cardox can dislodge over 3
tons of blockage in a single blast. This all takes place in milliseconds.

Carbon dioxide gas is an inert gas that is commonly used in fire extinguishers, so it is
safe to use without the fear of generating secondary reactions with gases in the
processing line. In addition the quick release of the gas refrigerates the discharge,
bringing it to a temperatre low enough to avoid ignition of any air-gas mixtures inside
the blocked vessel.

Simple, secure coupling systems are mounted on the equipment in areas of known
build up, which allows you to set the Cardox Tube to a predetermined depth and
discharge direction. This control of the discharge minimises any risk to refractory in
the equipment.

After use the Cardox Tube is easily removed and replaced with a Sealing Plug that
returns the equipment back to normal operation until the next time Cardox is needed.




Cardox Tube Cut-away



Cardox Tubes are refilled and reused continually for over 15 years.

With the new Tube Recharging Unit, Tubes are refilled with liquid CO2 in less
than a minute.






Cardos international are members of:
MANCHESTER CHAMBER OF COMMERCE AND INDUSTRY

CARDOX INTERNATONAL LIMITED
Canal Wharf, Lower Wharf Street, Ashton-Under-Lyne, Lancashire, OL6 7PE, England, UK

Tel: (0044) / (0)161 330 4477 Fax: (0044) / (0)161 330 9944 Email: info@cardox.co.uk

Web: www.cardox.co.uk

You might also like