-;HA?

DI
Technical Data
403C-11G

400 Series

9,3 kW @ 1500 rev/min

ElectropaK
Basic technical data

Performance

Number of cylinders . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 3
Cylinder arrangement... ... ... ... ... ... ... ... ... ... ... ... Vertical in-line
Cycle ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Four stroke
Induction system .. ... ... ... ... ... ... ... ... ... ... ... Naturally aspirated
Compression ratio ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 23 : 1
Bore.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 77 mm (3.03 in)
Stroke... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 81 mm (3.19 in)
Cubic capacity.. ... ... ... ... ... ... ... ... ... ... ... ... 1,131 litres (69 in)
Direction of rotation .. ... ... ... ... ... ... Clockwise viewed from front
Firing order... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1, 2, 3
Estimated total weight (dry).. ... ... ... ... ... ... ... 129.2 kg (284.8 lb)
Estimated total weight (wet) . ... ... ... ... ... ... ... ... TBA kg (TBA lb)
Overall dimensions
-height .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 700 mm (27.6 in)
-length .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 776 mm (30.6 in)
-width (including mounting brackets) ... ... ... ... ... 449 mm (17.7 in)
Moments of inertia (GD)
-engine . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . TBA kg m
-flywheel .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1,51 kg m
Centre of gravity
-forward from rear of block ... ... ... ... ... ... ... ... .. TBA mm (TBA in)
-above centre line of block ... ... ... ... ... ... ... ... .. TBA mm (TBA in)
-offset to Rhs of centre line .. ... ... ... ... ... ... ... .. TBA mm (TBA in)

Note: All data based on operation to ISO 14396 standard reference

conditions.
Speed variation at constant load ... ... ... ... ... ... ... ... ... ... . + 0.5%
Cyclic irregularity
-at 110% stand-by power .. ... ... ... ... ... ... ... ... ... ... ... ... ... . .TBA
Test conditions
-air temperature. ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 C (77 F)
-barometric pressure . ... ... ... ... ... ... ... ... ...100 kPa (29.61 in hg)
Sound level
Average sound pressure level for bare engine (without inlet and
exhaust) at 1 metre ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...76.7 dbA
-all ratings certified to within . ... ... ... ... ... ... ... ... ... ... ... ... + 5%
If the engine is to operate in ambient conditions other than those of
the test conditions, suitable adjustments must be made for these
changes. For full details, contact Perkins Technical Service
Department.
TBA% of the prime power rating can be applied TBA seconds after
the starter motor is energised. The remaining TBA% can be applied
TB A seconds after start if the ambient temperature is not less than
TBA C (TBA F). If it is less than TBA C (TBA F), an immersion
heater is recommended. For additional information, contact Perkins
Technical Service Department.

General installation
Type of operation and application
Designation
Gross engine power
Brake mean effective pressure

Units

Prime

Stand-by

50Hz

50Hz

kW (bhp)

8,6 (115)

9,5 (127)

kPa (lbf/in)

TBA (TBA)

TBA (TBA)
41 (135)

Mean piston speed

m/s (ft/s)

41 (135)

ElectropaK net engine power

kW (bhp)

8,4 (11.4)

9,3 (12.6)

l/min (UK gal/min)

27,3 (6.0)

27,3 (6.0)

Combustion air flow

m/min (ft/min)

0,7 (26.1)

0,7 (26.1)

Exhaust gas flow (max)

m/min (ft/min)

166 (586)

1,8 (63.3)

C (F)

368 (694)

420 (788)

Cooling fan air flow (Zero Duct Allowance)

m/min (ft/min)

402 (1420)

402 (1420)

Cooling fan air flow (0125 kPG Duct Allowance)

m/min (ft/min)

264 (932)

264 (932)

Energy in fuel (heat of combustion)

kW (Btu/min)

259 (1474)

29,5 (1682)

Gross heat to power

kW (Btu/min)

82 (489)

9,5 (540)

Energy to coolant and lubricating oil

kW (Btu/min)

83 (473)

9,5 (538)

Engine coolant flow (Water pump ratio 1.285:1)

Exhaust gas temperature (max)

Energy balance

Energy to exhaust

kW (Btu/min)

73 (413)

8,0 (461)

Heat to radiation

kW (Btu/min)

21 (119)

2,5 (142)

Caution: The airflows shown in this table will provide acceptable cooling for an open power unit operating in ambient temperatures of up
to 53 C (127 F) or 46C (115 F) if a canopy is fitted with an air flow restriction of up to 0125kPa (TBA mm H2O). If the power unit is to
be enclosed totally, a cooling test should be done to check that the engine cooling is acceptable. If there is insufficient cooling, contact
Perkins Technical Service Department.

219

481

403C-11G ElectropaK, left side view

328

233

683

776

403C-11G ElectropaK, front view

248

201

188

176

141

141

322

403C-11G ElectropaK, plan view

This page is intentionally blank

403C-11G

Cooling system
Radiator
-face area . ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 0147 m (158 ft)
-rows and materials.. ... ... ... ... ... ... ... ... ... ... .2 rows, Aluminium
-matrix density and material . ... ... ... ... ... ... ... 145FPI Aluminium
-width of matrix. ... ... ... ... ... ... ... ... ... ... ... ... ... 334 mm (131 in)
-height of matrix ... ... ... ... ... ... ... ... ... ... ... ... ... 440 mm (173 in)
-pressure cap setting ... ... ... ... ... ... ... ... ... .. 90 kPa (13.05 lb/in)
Estimated cooling air flow reserve ... ... ... ... ... ... ... ... .. 0125 kPa
Fan
-diameter .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 320 mm (TBA in)
-drive ratio ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1.285 : 1
-number of blades ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7
-material ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Plastic
-type . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...Pusher
Coolant
Total system capacity
-with radiator ... ... ... ... ... ... ... ... ... ... ..TBA litres (TBA UK pints)
-without radiator ... ... ... ... ... ... ... ... ... ... ..1,9 litres (3.3 UK pints)
-drain down capacity ... ... ... ... ... ... ... ..TBA litres (TBA UK pints)
Maximum top tank temperature ... ... ... ... ... ... ... . 110 C (230 F)
Minimum temperature to engine .. ... ... ... ... ... ... TBA C (TBA F)
Temperature rise across engine .. ... ... ... ... ... ... TBA C (TBA F)
Max permissible external system resistance TBA kPa (TBA lbf/in)
Thermostat operation range. ... ... ... ... ... 75 - 87C (167 - 189 F)
Recommended coolant:
50% ethylene glycol with a corrosion inhibitor (BS 6580 :1992 or
ASTM D3306-89 or AS2108) and 50% clean fresh water.

Electrical System
-alternator. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 15 A, 12 V
-starter motor ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..1,1 kW, 12 V
Cold start recommendations
Minimum cranking speed . ... ... ... ... ... ... ... ... ... ... .. TBA rev/min
Battery specifications
Minimum
Grade of
starting
BS3911
SAEJ537
Number
Comengine
Cold
Cold
of
mercial
temperature lubricating
start
amps

cranking
amps

batteries
needed

ref
number

oil

32

20W

340

540

069

-15

10W

340

540

069

-20

-4

5W

420

590

072

Exhaust system
Maximum back pressure .. ... ... ... ... ... ... .. 10,2 kPa (3.012 in Hg)
Exhaust outlet size Horizontal.. ... ... ... ... ... ... ... ... 34 mm (14 in)

9,3 kW @ 1500 rev/min

Fuel specification
Fuel specification
Density (kg/l @ 15 C)
Viscosity (mm/s @ 40 C)
Sulphur Content
Cetane Number

0,835 - 0,855
2,0 - 4,5
0.2% mass, maximum
45 minimum

Fuel consumption g/kWh (litres/hr)

Power rating
110%

100%

75%

50%

261 (2.9)

252 (2.6)

258 (2.0)

286 (1.5)

Induction system
Maximum air intake restriction
-clean filter . ... ... ... ... ... ... ... ... ... ... ... ... ... ... 3 kPa (12 in H2O)
-dirty filter... ... ... ... ... ... ... ... ... ... ... ... ... .. 6,4 kPa (25.6 in H2O)
-air filter type.. ... ... ... ... ... ... ... ... ... ... ... ... ... ..Dry element type

Lubrication system
Lubricating oil capacity
Total system .. ... ... ... ... ... ... ... ... ... ... ... 4,9 litres (8.6 UK pints)
Minimum ... ... ... ... ... ... ... ... ... ... ... ... ... 3,4 litres (6.0 UK pints)
Maximum engine operating angles
-front up, front down, right side or left side ... ... ... . 35 continuous
Lubricating oil pressure
-relief valve opens . ... ... ... ... ... 304 - 500 kPa (441 - 725 lbf/in)
-at maximum no-load speed .. ... ... ... ... ... ... ... ... ... ... ... ... ..TBA
Normal oil temperature .. ... ... ... ... ... ... ... ... ... ... 125 C (257 F)
Recommended SAE viscosity
A single or multi grade oil must be used which conforms API-CH-4
or ACEA E5.

0W
5W20
10W30
15W40
20W50
20
30
40
-30
-22

-20
-4

-10
14

0
32

10
50

20
68

Peterborough PE1 5NA United Kingdom

Telephone +44 (0) 1733 583000
Fax +44 (0) 1733 582240
www.perkins.com
All information in the document is substantially correct at the time
of printing but may be subsequently altered by the company.

50oC
122oF
W1355

Type of injection ... ... ... ... ... ... ... ... ... ... ... ... ... Indirect injection
Fuel injection pump .. ... ... ... ... ... ... ... ... ... ... ... ... Cassette type
Fuel injector.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..Pintle nozzle
Nozzle opening pressure . ... ... ... ... ... ... ..147 MPa (2133 lbf/in)
Fuel lift pump
-flow/hour . ... ... ... ... ... ... ... ... ... ... . 63 litres/hr (166 UK gals/hr)
-pressure .. ... ... ... ... ... ... ... ... ... ... ... ... ... ...10 kPa (145 lbf/in)
Maximum suction head ... ... ... ... ... ... ... ... ... ... ... ..0,8 m (2.6 ft)
Maximum static pressure head ... ... ... ... ... ... ... ... ...3 m (9.84 ft)
Governor type. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Mechanical
-diesel fuel to conform to.. ... ... ... ... ... ... ... ... ... .See table below

Perkins Engines Company Limited

40
104

Ambient temperarture

Fuel system

-;HA?DI

30
86

Distributed by

Maximum static bending moment

at rear face of block ... ... ... ... ... ... ... ... ... ... .. TBA Nm (TBA lb ft)
Publication No. TPD 1505E, issue 1. Printed in England. Perkins Engines Company Limited

400 Series