1200S Alodine
1200S Alodine
1200S Alodine
Manufacturer Information
Henkel Surface Technologies Henkel Corporation 32100 Stephenson Highway Madison Heights, MI 48071 Contact Phone: (248) 583-9300 Chemtrec Emergency # (800) 424-9300
Eye Contact:
This product is severely irritating to the eyes and may cause irreversible damage including burns and blindness.
Skin Contact:
Contact with broken skin may lead to formation of firmly marginated "chrome sores". Product contains chromium, which may cause an allergic skin sensitization reaction. Massive overexposures may lead to kidney failure and death. Following skin exposure to this product, the sensation of irritation or pain may be delayed.
Skin Absorption:
A component in this product may be harmful or fatal if absorbed through the skin, especially if skin is damaged.
Ingestion:
This product may produce corrosive damage to the gastrointestinal tract if it is swallowed. Ingestion of small amounts of this product may result in potentially fatal hypocalcemia and systemic toxicity.
Inhalation:
Inhalation of dusts of this product may cause severe irritation and burns to the respiratory tract. Prolonged or repeated breathing may cause ulceration of nasal membranes.
Page 1 of 7
Skin Contact:
Immediately take off all contaminated clothing. For skin contact, flush with large amounts of water. Seek immediate medical attention. If irritation persists, repeat flushing and get medical attention. Discard any shoes or clothing items that cannot be decontaminated.
Ingestion:
If the material is swallowed, get immediate medical attention or advice -- Do not induce vomiting. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Inhalation:
If inhaled, immediately remove the affected person to fresh air. Call a physician if symptoms develop or persist.
Decomposition Products:
Irritating and toxic gases or fumes may be released during a fire.
Extinguishing Media:
Use any media suitable for the surrounding fires.
Fire-Fighting Instructions:
Firefighters should wear full protective clothing including self contained breathing apparatus.
Clean-Up Procedures:
Spills should be cleaned immediately to prevent dispersion of airborne dusts. Do not allow the spilled product to enter public drainage system or open water courses. Follow all Local, State, Federal and Provencial regulations for disposal.
Page 2 of 7
Storage Procedures:
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Engineering Controls:
Ventilation should effectively remove and prevent buildup of any dust generated from the handling of this product.
Skin Protection:
Use impervious gloves. The use of butyl rubber gloves is recommended. Use of impervious apron and boots are recommended.
Respiratory Protection:
If ventilation is not sufficient to effectively prevent buildup of dust, appropriate NIOSH/MSHA respiratory protection must be provided.
Work Practices:
Eye wash fountain and emergency showers are recommended.
Page 3 of 7
Conditions to Avoid:
Oxidizing agent, may cause spontaneous ignition of combustible materials.
Incompatibility:
Avoid contact with organic materials, oils, greases, and any oxidizable materials. This product may react with strong alkalies.
Decomposition Products:
May liberate hydrogen fluoride.
Hazardous Polymerization:
Will not occur.
Carcinogenicity:
A: General Product Information
No information available for the product.
B: Component Carcinogenicity
Chromic acid, dry (1333-82-0)
ACGIH: NIOSH: NTP: A1 - Confirmed Human Carcinogen (related to Chromium (VI) water soluble compounds) potential occupational carcinogen Known Carcinogen (Listed under 'Chromium hexavalent compounds') (Select Carcinogen)
Chronic Toxicity
Contains fluorides. Exposure to fluorides over years may cause fluorosis. Excessive exposure to chromium VI can produce allergic skin sensitization reactions and severe nasal irritation, scarring and damage to the lungs, liver and kidney damage. Page 4 of 7 ____________________________________________________________ Issue Date: 08/26/04 Revision: 1.0121
Epidemiology:
No information available for the product.
Neurotoxicity:
No information available for the product.
Mutagenicity:
No information available for the product.
Teratogenicity:
No information available for the product.
Environmental Fate:
No data is available concerning the environmental fate, biodegradation or bioconcentration for this product.
Disposal Instructions:
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations. Neutralize the spilled material before disposal.
Page 5 of 7
ID: 234116
B: Component Analysis
This material contains one or more of the following chemicals required to be identified under SARA Section 302 (40 CFR 355 Appendix A), SARA Section 313 (40 CFR 372.65) and/or CERCLA (40 CFR 302.4). Potassium fluozirconate (16923-95-8)
CERCLA: 1000 lb final RQ; 454 kg final RQ
SARA 311/312:
State Regulations
A: General Product Information
No additional information available.
Other Regulations
A: General Product Information
All components are on the U.S. EPA TSCA Inventory List.
ID: 234116
Key/Legend
EPA = Environmental Protection Agency; TSCA = Toxic Substance Control Act; ACGIH = American Conference of Governmental Industrial Hygienists; IARC = International Agency for Research on Cancer; NIOSH = National Institute for Occupational Safety and Health; NTP = National Toxicology Program; OSHA = Occupational Safety and Health Administration; NFPA = National Fire Protection Association; HMIS = Hazardous Material Identification System; CERCLA = Comprehensive Environmental Response, Compensation and Liability Act; SARA = Superfund Amendments and Reauthorization Act The information presented herein is believed to be factual as it has been derived from the works and opinions of persons believed to be qualified experts; however, nothing contained in this information is to be taken as a warranty or representation for which Henkel Surface Technologies bears legal responsibility. The user should review any recommendations in the specific context of the intended use to determine whether they are appropriate. Contact: Regulatory Affairs and Product Acceptance Contact Phone: (248) 583-9300 This is the end of MSDS # 234116
Page 7 of 7