Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 677 views

    Heat Pump Assignment

    Uploaded by

    Omer Nadeem
    A heat pump uses a refrigeration cycle to move heat from a cooler space to a warmer space, reversing the direction of the natural flow of heat. It has four main components: an evaporator that absorbs heat from one space, a compressor that increases the pressure and temperature of the refrigerant, a condenser that releases heat to the other space, and an expansion valve that reduces the pressure and temperature before returning to the evaporator. Heat pumps can operate in heating or cooling mode depending on which indoor space is the evaporator and which is the condenser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Heat Pump Assignment

    Uploaded by

    Omer Nadeem
    677 views10 pages
    A heat pump uses a refrigeration cycle to move heat from a cooler space to a warmer space, reversing the direction of the natural flow of heat. It has four main components: an evaporator that absorbs heat from one space, a compressor that increases the pressure and temperature of the refrigerant, a condenser that releases heat to the other space, and an expansion valve that reduces the pressure and temperature before returning to the evaporator. Heat pumps can operate in heating or cooling mode depending on which indoor space is the evaporator and which is the condenser.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    A heat pump uses a refrigeration cycle to move heat from a cooler space to a warmer space, reversing the direction of the natural flow of heat. It has four main components: an evaporator that absorbs heat from one space, a compressor that increases the pressure and temperature of the refrigerant, a condenser that releases heat to the other space, and an expansion valve that reduces the pressure and temperature before returning to the evaporator. Heat pumps can operate in heating or cooling mode depending on which indoor space is the evaporator and which is the condenser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    677 views10 pages

    Heat Pump Assignment

    Uploaded by

    Omer Nadeem
    A heat pump uses a refrigeration cycle to move heat from a cooler space to a warmer space, reversing the direction of the natural flow of heat. It has four main components: an evaporator that absorbs heat from one space, a compressor that increases the pressure and temperature of the refrigerant, a condenser that releases heat to the other space, and an expansion valve that reduces the pressure and temperature before returning to the evaporator. Heat pumps can operate in heating or cooling mode depending on which indoor space is the evaporator and which is the condenser.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10
    At a glance
    Powered by AI
    Heat pumps use the vapor-compression refrigeration cycle to move heat from one place to another against the natural direction of heat flow. They can be used for both heating and cooling applications.

    The main components are an evaporator, compressor, condenser and expansion valve. Additional components for reversibility include a reversing valve and bi-directional expansion valve.

    In heating mode, the outdoor coil is the evaporator and indoor coil is the condenser. In cooling mode, the roles are reversed with the outdoor coil acting as the condenser.

    HEAT PUMP

    A heat pump is a device which applies external work to extract an amount of heat QC from a cold reservoir and delivers heat QH to a hot reservoir. Thus, heat pumps move thermal energy in a direction which is opposite to the direction of spontaneous heat flow. Summary:If the heat pump is reversible, then a reversing valve allows for the flow direction of the refrigerant to be changed.

    In heating mode, the outdoor coil is an evaporator, while the indoor is a condenser. The refrigerant flowing from the evaporator (outdoor coil) carries the thermal energy from outside air (or ground) indoors, after the fluid's temperature has been augmented by compressing it. The indoor coil then transfers thermal energy (including energy from the compression) to the indoor air, which is then moved around the inside of the building by an air handler. The refrigerant is then allowed to expand, cool, and absorb heat to reheat to the outdoor temperature in the outside evaporator, and the cycle repeats. This is a standard refrigeration cycle, save that the "cold" side of the refrigerator (the evaporator coil) is positioned so it is outdoors where the environment is colder. In cooling mode, the cycle is similar, but the outdoor coil is now the condenser and the indoor coil (which reaches a lower temperature) is the evaporator. This is the familiar mode in which air conditioners operate.

    Working principle:Heat energy is the collective random motion of molecules, and temperature is a measure of how fast the molecules are moving. Heat energy spontaneously flows down the temperature scale from a warmer region to a cooler one.

    A final basic principle underlying heat pump mechanics is that when a gas is compressed, the number of molecular collisions increases due to the increased concentration of molecules, and its temperature rises.

    Basic Operations
    Following are the basic steps that are followed, Evaporation Compression Condensation Expansion Evaporation: The coolant circulating in the heat pump system collects heat from the air, water or the ground and this process causes the coolant to evaporate and change to a gaseous state. Compression: The heat pump's compressor rapidly compresses the coolant, which is now in a gaseous state and several degrees warmer. Condensation: Using a second heat exchanger, the heat from the heated coolant is transferred to the water circulating through the radiators. This causes the coolant to drop in temperature and condense back into a liquid state. The radiators distribute the heat provided into the heated areas. The chilled water in the heat loop then travels back into the second heat exchanger, where it is heated again.

    Expansion: By passing through the expansion valve, the coolant travels back to the first heat exchanger, where it is once again heated. This cycle keeps repeating itself over and over again. For any other heat engine, maximum efficiency can be calculated from the Carnot cycle. Heat Pumps are usually characterized by a coefficient of performance.

    Coefficient of Performance(COP)
    The coefficient of performance (CP) for a heat pump is the ratio of the energy transferred for heating to the input electric energy used in the process or It is the number of units of energy delivered to the hot reservoir per unit work input. So the coefficient is defined by

    There is a theoretical maximum CP, that of the Carnot cycle : For a refrigerator, however, the useful quantity is the heat extracted, QC , not the heat exhausted. Therefore, the coefficient of performance of a refrigerator is expressed as

    Different sources
    The cold source (from which heat is recovered) The external medium from which heat is drawn is called a cold source. In the heat pump the refrigerant absorbs heat from the cold source by means of the evaporator. The main cold sources are: Air: outside the space to be heated, typically air from the external environment; water: from the water table, rivers, and lakes, when in proximity to the spaces to be heated and at a limited depth below the surface. ground, into which specific pipes relating to the evaporator are sunk to varying depths (these pipes constitute a geothermal system). The hot source (to which heat produced and recovered is transferred) The air or water to be heated is called a hot source. Heat may be transferred to the environment through: - Fan coils, consisting of cabinets in which air is made to circulate through heating bodies. These may be wall-mounted, ceiling-mounted or built-in models. - Coils built into the floor, in which hot water circulates. Heating occurs mainly through radiation and requires a lower water temperature. - Canalizations, which transfer the heat produced by the heat pump to the different rooms, by means of suitable air channels and inlet vents.

    Different Heat Pump Types


    Vapor compression refrigerator

    Typical pressure and temperature conditions for such a refrigerator are as below.

    Air-source heat pumps Heat pumps use the same vapor-compression cycle as the refrigeration systems described above, but they have additional components that enable them to pump

    heat in either direction, such that the same equipment unit can provide cooling or heating. The two added components that make heat pumps fully reversible are:

    A 4-way reversing valve, which can reverse the direction of flow around the refrigerant loop while maintaining the same direction of flow through the compressor. A bi-directional expansion valve, which is able to meter the flow of liquid refrigerant in either direction (for purposes of illustration, the diagrams below show two expansion valves and two bypass valves, but modern heat pumps often incorporate all of this functionality in a single valve).

    Air-source heat pump in cooling mode

    Air-source heat pump in heating mode

    A packaged air-source heat pump unit

    A split air-source heat pump system

    Water-source heat pumps Water is a much more efficient heat energy transfer medium than air, due to its much higher specific heat. Using pumps or fans with comparable efficiencies, it takes four times less energy to move a given quantity of heat with water than with air. Furthermore, due to the higher density of water, a piping conduit takes up less space than an air duct with the same heat moving capacity. Therefore water is the preferred heat distribution medium for large, multi-story buildings.

    A boiler/tower heat pump system Ground-source (geothermal) heat pumps

    A geothermal heat pump system

    You might also like