CHEMISTRY (Theory)

Time allowed : 3 hours General Instructions: (i) All questions are compulsory. Maximum Marks : 70

(ii) Marks for each question are indicated against it. (iii) Question numbers 1 to 8 are very short-answer questions and carry 1 mark each. (iv) Question numbers 9 to 18 are short-answer questions and carry 2 marks each. (v) Question numbers 19 to 27 are also short-answer questions and carry 3 marks each. (vi) Question numbers 28 to 30 are long-answer questions and carry 5 marks each. (vii) Use Log Tables, if necessary, Use of calculators is not allowed.

QUESTION PAPER CODE 56/1/1 1. 2. 'Crystalline solids are anisotropic in nature.' What does this statement mean? Express the relation between conductivity and molar conductivity of a solution held in a cell. Define 'electrophoresis'. Draw the structure of XeF2 molecule. Write the IUPAC name of the following compound: (CH3)3 CCH2Br 6. 7. Draw the structure of 3-methylbutanal. Arrange the following compounds in an increasing order of their solubility in water: C6H5NH2, (C2H5)2NH, C2H5NH2
182

3. 4. 5.

8. 9.

What are biodegradable polymers? The chemistry of corrosion of iron is essentially an electrochemical phenomenon. Explain the reactions occurring during the corrosion of iron in the atmosphere. Determine the values of equilibrium constant (KC) and G for the following reaction:
o

10.

Ni(s) + 2Ag+ (aq) Ni2+(aq) + 2Ag(s), E = 1.05 V

o

(IF = 96500 C mol ) 11. 12. Distinguish between 'rate expression' and 'rate constant' of a reaction. State reasons for each of the following: (i) (ii)
The N O bond in NO is shorter than the N O bond in NO 3 . 2

SF6 is kinetically an inert substance. OR

State reasons for each of the following: (i) (ii) 13. All the P-Cl bonds in PCl5 molecule are not equivalent. Sulphur has greater tendency for catenation than oxygen.

Assign reasons for the following: (i) (ii) Copper (I) ion is not known in aqueous solution. Actinoids exhibit greater range of oxidation states than lanthanoids.

14.

Explain the following giving one example for each: (i) (ii) Reimer-Tiemann reaction. Friedel Craft's acetylation of anisole.

15.

How would you obtain (i) (ii) Picric acid (2, 4, 6-trinitrophenol) from phenol, 2-Methylpropene from 2-methylpropanol ?

183

16.

What is essentially the difference between -form of glucose and -form of glucose? Explain. Describe what you understand by primary structure and secondary structure of proteins. Mention two important uses of each of the following: (i) (ii) Bakelite Nylon 6

17.

18.

19.

Silver crystallizes in face-centered cubic unit cell. Each side of this unit cell has a length of 400 pm. Calculate the radius of the silver atom. (Assume the atoms just touch each other on the diagonal across the face of the unit cell. That is each face atom is touching the four comer atoms.)
Nitrogen pentoxide decomposes according to equation: 2N2O5(g) 4 NO2(g) + O2(g).

20.

This first order reaction was allowed to proceed at 40 C and the data below were collected: [N2O5] (M) 0.400 0.289 0.209 0.151 0.109 (a) (b) (c) Time (min) 0.00 20.0 40.0 60.0 80.0

Calculate the rate constant. Include units with your answer. What will be the concentration of N2O5 after 100 minutes? Calculate the initial rate of reaction.

184

21.

Explain how the phenomenon of adsorption finds application in each of the following processes: (i) (ii) (iii) Production of vacuum Heterogeneous catalysis Froth Floatation process OR Define each of the following terms: (i) (ii) (iii) Micelles Peptization Desorption

22.

Describe the principle behind each of the following processes: (i) (ii) (iii) Vapour phase refining of a metal. Electrolytic refining of a metal. Recovery of silver after silver ore was leached with NaCN.

23.

Complete the following chemical equations: (i) (ii) (iii)

Mn O + C2 O 2 + H + 4 4

KMnO4 heated
Cr2 O 2 + H2S + H + 4
+

24.

Write the name, stereochemistry and magnetic behaviour of the following: (At.nos. Mn = 25, Co = 27, Ni = 28) (i) (ii) (iii) K4 [Mn(CN)6] [Co(NH3)5 Cl] Cl2 K2[Ni(CN)4]

185

25.

Answer the following: (i) (ii) (iii) Haloalkanes easily dissolve in organic solvents, why? What is known as a racemic mixture? Give an example. Of the two bromoderivatives, C6H5CH(CH3)Br and C6H5CH(C6H5) Br, which one is more reactive in SN1 substitution reaction and why? Explain why an alkylamine is more basic than ammonia. How would you convert (i) (ii) Aniline to nitrobenzene Aniline to iodobenzene ?

26.

(a) (b)

27.

Describe the following giving one example for each: (i) (ii) (iii) Detergents Food preservatives Antacids Differentiate between molarity and molality for a solution. How does a change in temperature influence their values? Calculate the freezing point of an aqueous solution containing 10.50 g of MgBr2 in 200 g of water. (Molar mass of MgBr2 = 184 g) (Kf for water = 1.86 K kg mol ) OR (a) (b) Define the terms osmosis and osmotic pressure. Is the osmotic pressure of a solution a colligative property? Explain. Calculate the boiling point of a solution prepared by adding 15.00 g of NaCl 1 to 250.0 g of water. (Kb for water = 0.512 K kg mol , Molar mass of NaCl = 58.44 g)
1

28.

(a) (b)

29.

(a)

Give chemical tests to distinguish between (i) (ii) Propanal and propanone, Benzaldehyde and acetophenone.
186

(b)

How would you obtain (i) (ii) (iii) But-2-enal from ethanal, Butanoic acid from butanol, Benzoic acid from ethylbenzene ? OR

(a)

Describe the following giving linked chemical equations: (i) (ii) Cannizzaro reaction Decarboxylation

(b)

Complete the following chemical equations: CH2CH3 (i) COOH (ii) COOH C6H5CONH2 4
KOH, heat KMnO

SOCl2
heat +

(iii) 30. (a)

H3O
heat

Explain the following: (i) (ii) NF3 is an exothermic compound whereas NCl3 is not. F2 is most reactive of all the four common halogens.

(b)

Complete the following chemical equations: (i) (ii) (iii)

C + H2SO4 (conc)

P4 + NaOH + H2O C12 + F2 (excess)

187

OR (a) Account for the following: (i) (ii) The acidic strength decreases in the order HCl > H2S > PH3 Tendency to form pentahalides decreases down the group in group 15 of the periodic table.

(b)

Complete the following chemical equations: (i) (ii) (iii)

P4+ SO2Cl2
XeF2 + H2O

I2 + HNO3 (conc) QUESTION PAPER CODE 56/1

1. 2. 3. 4. 5.

Define 'order of a reaction'. What is meant by 'shape selective catalysis' ? Differentiate between a mineral and an ore. What is meant by 'lanthanoid contraction' ? Write the IUPAC name of the following compound: CH2 = CHCH2Br

1 1 1 1 1

6. 7. 8.

Draw the structure of 4-chloropentan-2-one. How would you convert ethanol to ethene ? Rearrange the following in an increasing order of their basic strengths: C6H5NH2, C6H5N(CH3)2, (C6H5)2NH and CH3NH2.

1 1 1

9.

Explain how you can determine the atomic mass of an unknown metal if you know its mass density and the dimensions of unit cell of its crystal.
188

10. 11.

Calculate the packing efficiency of a metal crystal for a simple cubic lattice. State the following: (i) (ii) Raoult's law in its general form in reference to solutions. Henry's law about partial pressure of a gas in a mixture.

2 2

12.

What do you understand by the rate law and rate constant of a reaction? Identify the order of a reaction if the units of its rate constant are: (i) (ii) L mol s L mol s
1 1

1 1

13.

The thermal decomposition of HCO2H is a first order reaction with a rate constant 3 1 of 2.4 x 10 s at a certain temperature. Calculate how long will it take for threefourths of initial quantity of HCO2H to decompose. (log 0.25 = 0.6021) Describe the principle controlling each of the following processes: (i) (ii) Vapour phase refining of titanium metal Froth floatation method of concentration of a sulphide ore.

2 2

14.

15.

How would you account for the following: (i) Cr2+ is reducing in nature while with the same d-orbital configuration (d4) Mn3+ is an oxidising agent. In a transition series of metals, the metal which exhibits the greatest number of oxidation states occurs in the middle of the senes. 2

(ii)

16.

Complete the following chemical equations: (i) (ii)

2 Mn O (aq) + S2 O 3 (aq) + H2O (l) 4 2 Cr2O 7 (aq) + Fe2+ (aq) + H + (aq)

OR State reasons for the following: (i) Cu (I) ion is not stable in an aqueous solution.
189

(ii)

Unlike Cr3+, Mn3+, Fe3+ and the subsequent other M3+ ions of the 3d series of elements, the 4d and the 5d series metals generally do not form stable cationic species. 2

17.

Explain what is meant by the following: (i) (ii) peptide linkage pyranose structure of glucose

18.

Write the main structural difference between DNA and RNA. Of the four bases, name those which are common to both DNA and RNA. A solution prepared by dissolving 8.95 mg of a gene fragment in 35.0 mL. of water has an osmotic pressure of 0.335 torr at 25 C. Assuming that the gene fragment is a non-electrolyte, calculate its molar mass. Classify colloids where the dispersion medium is water. State their characteristics and write an example of each of these classes. OR Explain what is observed when (i) (ii) (iii) an electric current is passed through a sol a beam of light is passed through a sol an electrolyte (say NaCl) is added to ferric hydroxide sol

19.

20.

3 3

21.

How would you account for the following: (i) (ii) (iii) H2S is more acidic than H2O.
The N O bond in NO is shorter than the N O bond in NO 3 . 2

Both O2 and F2 stabilize high oxidation states but the ability of oxygen to stabilize the higher oxidation state exceeds that of fluorine. 3

22.

Explain the following terms giving a suitable example in each case: (i) (ii) (iii) Ambident ligand Denticity of a ligand Crystal field splitting in an octahedral field
190

23.

Rearrange the compounds of each of the following sets in order of reactivity towards SN2 displacement: (i) (ii) 2-Bromo-2-methylbutane, 1-Bromopentane, 2-Bromopentane 1- Bromo-3-methylbutane, 2-Bromo-2-methylbutane, 3- Bromo-2-methylbutane 1- Bromobutane, 1- Bromo-2,2-dimethylpropane, 1- Bromo-2-methylbutane

(iii)

24.

How would you obtain the following: (i) (ii) (iii) Benzoquinone from phenol 2-Methylpropan-2-ol from methylmagnesium bromide Propan-2-ol from propene 3

25.

State reasons for the following: (i) (ii) (iii) pKb value for aniline is more than that for methylamine. Ethylamine is soluble in water whereas aniline is not soluble in water. Primary amines have higher boiling points than tertiary amines.

26.

Draw the structures of the monomers of the following polymers: (i) (ii) (iii) Polythene PVC Teflon

27.

What are the following substances? Give one example of each. (i) (ii) (iii) Food preservatives Synthetic detergents Antacids What type of a battery is lead storage battery? Write the anode and cathode reactions and the overall cell reaction occurring in the operation of a lead storage battery.

28.

(a)

191

(b)

Calculate the potential for half-cell containing 0.10 M K2Cr2O7 (aq), 0.20 M Cr The half-cell reaction is
3+

(aq) and 1.0 x 10

M H (aq)

2 Cr2 O 7 (aq) + 14 H+ (aq) + 6 e 2 Cr3+ (aq) + 7 H2O (l),

and the standard electrode potential is given as E = 1.33 V. OR (a) How many moles of mercury will be produced by electrolysing 1.0 M Hg(NO3)2 solution with a current of 2.00 A for 3 hours? [Hg(NO3)2 = 200.6 g mol ] (b) A voltaic cell is set up at 25 C with the following half-cells A1 (0.001 M) 2+ and Ni (0.50 M). Write an equation for the reaction that occurs when the cell generates an electric current and determine the cell potential. = 1.66 V) (Given: E o 2+ / Ni = 0.25 V, E o 3+ Ni Al / Al 29. (a) Draw the structures of the following molecules: (i) (ii) (b) (HPO3)3 BrF3
o 3+ 1

Complete the following chemical equations: (i) (ii) (iii) HgCl2 + PH3 S03 + H2SO4 XeF4 + H2O OR 5

(a)

What happens when (i) (ii) chlorine gas is passed through a hot concentrated solution of NaOH ? sulphur dioxide gas is passed through an aqueous solution of a Fe (III) salt ?
192

(b)

Answer the following: (i) (ii) What is the basicity of H3PO3 and why.? Why does fluorine not play the role of a central atom in interhalogen compounds? Why do noble gases have very low boiling points? 5

(iii) 30. (a)

Illustrate the following name reactions: (i) (ii) Cannizzaro's reaction Clemmensen reduction

(b)

How would you obtain the following: (i) (ii) (iii) But-2-enal from ethanal Butanoic acid from butanol Benzoic acid from ethylbenzene OR 5

(a)

Give chemical tests to distinguish between the following: (i) (ii) Benzoic acid and ethyl benzoate Benzaldehyde and acetophenone

(b)

Complete each synthesis by giving missing reagents or products in the following: COOH (i) COOH C6H5CHO

SOCl2
heat

(ii)

H 2 NCONHNH 2
CH2

(iii)

CHO

193

Marking Scheme Chemistry

General Instructions
1. The Marking Scheme provides general guidelines to reduce subjectivity in the marking. The answers given in the Marking Scheme are suggested answers. The content is thus indicative. If a student has given any other answer which is different from the one given in the Marking Scheme, but conveys the same meaning, such answers should be given full weightage. The Marking Scheme carries only suggested value point for the answers. These are only guidelines and do not constitute the complete answers. The students can have their own expression and if the expression is correct the marks, will be awarded accordingly. The Head-Examiners have to go through the first five answer-scripts evaluated by each evaluator to ensure that the evaluation has been carried out as per the instruction given in the marking scheme. The remaining answer scripts meant for evaluation shall be given only after ensuring that there is no significant variation in the marking of individual evaluators. Evaluation is to be done as per instructions provided in the Marking Scheme. It should not be done according to one's own interpretation or any other consideration - Marking Scheme should be strictly adhered to and religiously followed. If a question has parts, please award marks in the right hand side for each part. Marks awarded for different parts of the question should then be totalled up and written in the left hand margin and circled. If a question does not have any parts, marks be awarded in the left-hand margin. If a candidate has attempted an extra question, marks obtained in the question attempted first should be retained and the other answer should be scored out. No Marks to be deducted for the cumulative effect of an error. It should be penalized only once. A full scale of marks 0-70 has to be used. Please do not hesitate to award full marks if the answer deserves it. Separate marking schemes for all the three sets have been provided.

2.

3.

4.

5.

6. 7.

8.

9.

10.

194

QUESTION PAPER CODE 56/1/1 EXPECTED ANSWERS/VALUE POINTS 1 It means that some of their physical properties show different values when measured along different directions in the same crystal. m = / c where m is molar conductivity, is conductivity, c is concentration in mol L1 3 The movement of colloidal particles under an applied electric potential towards oppositely charged electrodes is called electrophoresis.

1 1

5 6

1-bromo-2, 2 - dimethyl propane CH3 -CH -CH2-CHO | CH3 C6H5NH2 < (C2H5)2NH < C2H5NH2 Polymers which undergo bacterial degradation in the environment and are thus ecofriendly. oxidation: Fe (s) Fe2+ (aq) + 2e+ Reduction: O2 (g) + 4H+ (aq) + 4c 22(1)
195

1 1

7 8

1 1

Atmospheric oxidation: 2Fe2+ (aq) + 2H2O(l) + 10 rG = -n FE cell

0 0

1 + O (g) Fe2O3(s) + 4H (aq) 2 2

= -2 x (96500Cmor11) x 1.05V = -202650J mol1 or -202.6kJ mor log Kc = nE

0 1

0.0591

= 2 x 1.05V 0.0591 = 35.53 Kc = 3.412 x 10

35

[Marks to be given if substitution is done with proper units] 11 Rate Law is the expression in which reaction rate is given in terms of molar concentration of reactants with each term raised to some power which may or may not be same as the stoichiometric coeffcient of the reacting species in a balanced chemical equation, whereas the rate constant is defined as the rate of reaction when the concentration of the reactant(s) is unity. (or properly explained in any other way) 12 i) In the resonance structure of these two species, in NO2 , 2 bonds are sharing a double bond while in NO3 , 3 bonds are sharing a double bond which means that bond in NO2 will be shorter than in NO3 . Or In NO2, bond order is 1.5 while in NO 3 , bond order is 1.33 ii) Because SF6 is sterically protected by six F atoms / co-ordinatively saturated. OR i) Because PCl5 has a trigonal bipyramidal structure in which three P-Cl bonds are equatorial and two P-Cl bonds are axial. Because S-S single bond is stronger than O-O single bond

1+1

ii)

196

13

i)

Because copper(I) ion is unstable in aqueous solution and undergoes, disproportionation. Because of comparable energies of Sf; 6d and 7s orbitals in actinoids. Reimer-Tiemann Reaction OH CHCl3 + aq NaOH ONa+ CHCl2 NaOH2 ONa+ CHO H
+

1+1

ii) 14 (i)

OH CHO

Internediate (or any other example) ii) Friedal-Craft's acetylation of anisole OCH3 + CH3COCl anhydrous AICI3 OCH3 COCH3

Salicylaldehyde

OCH3 +

COCH3 (or any other example) 15 i) OH conc HNO3 NO 2 OH NO 2

NO 2 (or by action of conc.HNO3 on phenol) (ii)

(or by action of hot conc. H2SO4) 16 - form of glucose and - form of glucose differ only in the configuration of the hydroxyl group at C1 in cvclic structure of glucose/hemiacetal form of glucose/ pyranose structure of glucose. (or structure drawn)
197

17

Primary structure of proteins: The protein in which amino acids are linked with each other in a specific sequence is said to be the primary structure of that protein. Secondary structure of proteins: It refers to the shape in which a long polypeptide chain can exist i.e. - helix and -pleated structure. 1 1

18

i)

Bakelite For making combs, electrical switches, handles of utensils, computer discs (or any other use) any two +

ii)

Nylon-6 For making tyre cords, fabrics, ropes(or any other use) any two +

19

For fcc unit cell r= a 2 2 1

Given a = 400 pm r = 400 / 22 pm r =141.4 pm 20 a) k = 2.303 log [A0] t [A] k = 2.303 log 0.400 20 min 0.289 k = 0.0163min1 b) k = 2.303 log [A0] t [A] 0.0163 = 2.303 log 0.400 100 [ A] [A] = 0.078M c) Initial rate R = k [N2O5] = 0.0163 min (0.400 M) = 0.00652 M min
1 1

1
198

21

i)

Production of vacuum: The remaining traces of air can be adsorbed by charcoal from a vessel to create a vacuum.

ii)

Heterogeneous catalysis: Adsorption of reactants on the solid surface of the catalysts increases the rate of reaction.

iii)

Froth floatation process: In this process, sulphide ore is concentrated by using pine oil which adsorbs the ore particles and imurities are wetted by water which settle at the bottom. OR

1x3 = 3

i)

Micelles: Micelles are associated colloids which show colloidal behaviour at high concentration and act as strong electrolytes at low concentration.

ii)

Peptization: The process of converting a precipitate into colloidal sol by shaking it with dispersion medium in the presence of a small amount of electrolyte is called Peptization.

iii)

Desorption: The process of removing an adsorbed substance from a surface on which it is adsorbed is called desorption.

1x3 = 3 1

22

i)

Vapour phase refining of a metal: In this method the metal is converted into its volatile compound which is then decomposed to give pure metal.

ii)

Electrolytic refiniing of a metal: In this method, the impure metal is made to act as anode and metal in pure form is used as cathode. They are put in a suitable electrolytic bath containing soluble salt of the same metal. The more basic metal goes to the anode and the less basic metal gets deposited at the cathode.

199

iii)

Recovery of silver after silver ore was leached with NaCN: More basic and cheaper zinc can displace silver from the complex and silver metal can be recovered. 2 [Ag(CN)2] (aq) + Zn(s) [Zn (CN)4] + 2Ag(s)
2 (aq)

23

i) ii) iii)

5C2O42 + 2MnO4 + 16H4 2Mn2+ + 8H2O + 10CO2 2KMnO4 heat K2MnO4 + MnO2 + O2 Cr2O72 + 3H2S + 8H 2Cr + 3S + 7H2O
+ 3+

1 1 1

24

i)

K4 [Mn(CN)2] : Potassium hexacyanomanganate (II), Octahedral / paramagnetic. [Co(NH3)5Cl] Cl2 : pentaamminechloridocobalt(III) chloride, octahederal/ diamagnetic. K2[Ni(CN)4): potassium tetracyanonickelate(II), square planar / diamagnetic. +=1

ii)

iii)

( mark for the nomenclature and mark for the property in each part) 25 (i) Because the new intermolecular attractions between haloalkanes and solvent molecules have about the same strength or stronger than the existing ones in the molecules. A mixture containing two enantiomers in equal proportions is known as a racemic mixture. e.g. (+) butan-2-ol (or any other example) C6H5CH(C6H5) Br, because it forms more stable carbocation. Due to +1 effect / electron donating character of alkyl group, alkylamine is more basic than ammonia. i)

(ii)

+=1

(iii) 26 a)

1 1

b)

ii)

200

27

(i)

Detergents are sodium salts of long chain alkyl sulphonates or benzene sulphonates. eg: Sodium Lauryl sulphate. Food preservatives: are the compounds which prevent spoilage of food due to microbial growth. eg: sodium benzoate, vinegar (or anyone example) Antacids: are the drugs used to prevent the overproduction of acid in the stomach. e.g. Sodium hydrogen carbonate / or any other suitable example0 Molality (m) is the number of moles of the solute per kilogram (kg) of the solvent whereas Molarity is the number of moles of solute present in one litre (or one cubic decimeter) of solution at a particular temperature. Molality is independent of temperature whereas Molarity is function. of temperature because volume depends on temperature and the mass does not or Molarity decreases with increase of temperature.

+=1

(ii)

+=1

(iii)

+=1

28

a)

b)

Tf = 7.50C Tf = iKf m x 1000 Tf0 - Tf = 3 x 1.860C kg mol x 10.50g 184 gmol-1 200kg 00C-Tf = 1.590C Tf = l.590C or 271.41 K OR 1
1

a)

The flow of solvent motecutes from solution of low concentration to higher concentration through semipermeable membrane is called osmosis. The hydrostatic pressure that has to be applied on the solution to prevent the entry of the solvent into the solution through the semipermeable membrane is called the Osmotic Pressure. Yes osmotic pressure is a colligative property as it depends upon the number of particles of the solute in a solution.

b)

Tb = iKb m x 1000 Tb- Tb0 = 2 x 0.512K kg mol1 x 15 g 58.44 gmol1 250kg Tb-373 K = 1.05 K Tb = 374.05K or 101.050C
201

29

(a)

(i)

Propanal and Propanone

Iodoform lest. Warm each compound with iodine and sodium hydroxide on a water bath With. Propanal (CH3CH2CHO) : No yellow ppt is formed with Propanone (CH3COCH3 ) : Yellow crystals of Iodoform are formed. (Other relevant test can be accepted) (ii) Benzaldehyde and Actopbenone 1+1=2

Iodoform test. Warm each organic compound with I2 and NaOH solution. Acetophenone (C6H5COCH3) Yellow precipitates of iodoform are formed with Benzaldehyde does not respond to this test. (Other relevent test can be accepted) (b) i)

ii)

iii)

(Or by any other suitable method) OR i) Cannizzaro reaction: Aldehydes which do not have an a-hydrogen atom, undergo self oxidation and reduction reaction on treament with concentrated alkali

1x3=3

202

(or any other correct equation) ii) Decarboxylation: Carboxylic acids lose carbon dioxide to form hydrocarbons when their sodium salts are heated with sodalime. The reaction is known as decarboxylation. R-COONa NaOH, CaO R-H + Na2CO3 Heat

(Note: Award full marks for correct chemical equation; award mark if only statement is written) COO K b) (i) COCI (ii) COCI C6H5COOH 1x3=3
+

(iii) 30 (a) i)

Becuase bond energy of F2 is lower than that of Cl 2 and N-F bond is smaller & stronger than N-Cl bond. Because of low bond dissociation enthalpy of F-F bond.

1 1

ii) b) i) ii) iii)

C+2H2SO4(conc) CO2 + 2SO2 + 2H2O P4 + 3NaOH + 3H2O PH3 + 3NaH2PO2

Cl2 + 3F2 2C1F3

203

1x3=3

OR i) Because of increase in bond dissociation enthalpy from H-Cl bond to H-P bond / Because of decrease in electronegativity from to Cl to P. Because of the energy factor (inert pair effect) , stability of + 3 oxidation state increases than that of +5 oxidation state.

ii)

b) i)
P2 + 10SO2Cl2 4PCl5 + 10SO2

1+1

or P4 + 8SO2Cl2 4PCl3 + 4SO2 + 2S2Cl2 ii) iii) XeF2 2H2O 2Xe + 4HF +O2 I2 + 10 HNO3 (conc) 2HIO3 + 10 NO2 + 4H2O QUESTION PAPER CODE 56/1 EXPECTED ANSWERS/VALUE POINTS 1 The sum of powers of the concentration terms of the reactants in the rate law expression is called the order of that chemical reaction. Or rate = k[A] [B]
P q

1x3=3

Order of reaction = P+q 2 The catalytic reaction in which the pore structure of the catalyst and the size of the reactant and product molecules are comparable. The naturally occurring chemical substances which occur in the earth's crust and are obtainable by mining are called minerals, while the mineral from which the element is extracted economically is called an ore. The regular decrease in the atomic and ionic radii / (having the same charge ) of Lathanoids with increasing atomic number is known as Lanthanoid contraction. 3-Bromoprop-I-ene / 3-Bromopropene CH3 CO - CH2 - CH(Cl)-CH3
204

1 1 1

5 6

H2SO4 CH3CH2OH CH2 = CH2 + H2O 443K (C6H5)2NH < C6H5NH2 < C6H5N(CH3)2 < CH3NH2 We can determine the atomic mass of an unknown by using the formula. M= d x a3 x NA Z By knowing d, a, NA & Z We can calculate the M Where d = density of the element NA = Avogadro number a = cell edge or edge length Z = no. of atoms present in one unit cell.

8 9

10

Packing efficiency = Z x volume of one atom Volume of cubic unit cell = 1 x 4/3 r a3
3

For simple cubic lattice a= 2r Therefore packing effieciency = 1 x 4/3 r3 8r3 = 0.524 or 52.4% 11 i) Raoult's law states that for a solution of volatile liquids, the partial vapour pressure of each component in the solution is directly proprtional to its mole fraction. Henry's law states that at a constant temperature, the solubility of a gas in a liquid is directly proportional to the pressure of the gas over the solution. 1

ii)

205

12

The representation of rate of reaction in terms of concentration of the reactants is known as rate law. The rate constant is defined as the rate of reaction when the concentration of reactants is unity. i) ii) zero order second order

x4 = 2

13

t = 2.303 x log [A]0 k [A] t = 2.303 3 1 x 2.4x10 s t = 2.303 3 1 x 2.4x10 s t = 2.303 3 1 x 2.4x10 s t = 578s log [A]0 [A ]0/4 log 4 0.60212 1

14

(i)

In this method the titanium metal is heated with I2 to form a volatile compound TiI4 which on further heating at higher temperature decomposes to give pure titanium metal. (or explanation by chemical equations) This method is based upon the fact that the surface of the sulphide ores is preferentially wetted by oil while that of gangue is wetted by water. Cr2+ is reducing as its configuration changes from d4 to d3, the latter having half filled t2g level whereas Mn3+ to Mn2+ results in half filled orbitals (d5) In a transition metal series the oxidation state first increases and then decreases; At the middle it is maximum due to greater number of unpaired electron in (n-l)d and ns orbitals. 8MnO4 (aq) + 3S2O32 (aq) + H2O (1) 8 MnO2 (s) + 6 SO42 (aq) + 20H (aq)

1 1

(ii)

15

(i) ii)

1 1 1

16

(i) ii)

Cr2 O72 (aq) + 14 H (aq) + 6 Fe+2 (aq) 2 Cr3 (aq) + 6 Fe+3 (aq) + 7H2O (1)
+

OR i) Because Copper(I) ion is unstable in aqueous solution and undergoes disproportionation.

206

ii)

Due to lanthanoid contraction the expected increase in size does not occur. Peptide linkage: A link between two amino acids with loss of water / CO - NH The six membered cyclic structure of glucose is called pyranose structure in analogy with pyran heterocyclic compound / or structure. 1

17

(i) (ii)

18

In DNA, sugar is Deoxyribose while in RNA, it is ribose./ DNA is as double stranded while RNA is single stranded.(any one) The common bases present in both are adenine, cytosine & guanine.

1 1 1

19

= CRT M2 = w2 R T V

3 1 1 M2 = 8.95x10 g x 0.0821L atm mol K x 298 K x 760 x 1000 0.335 atm x 35 L

M2 = 14193.3 g mol1 or 1.42x104g mol1 20 They are of two types i) Hydrophilic ii) hydrophobic

The hydrophile sol is more stable and reversible while hydrophobic sol is less stable and is irreversible. 1 Hydrophilic sol e.g. Starch, gum, gelatin etc. (anyone) Hydrobhobic sol e.g metal sulphide, metal hydroxide (anyone) OR i) Electrophoresis takes place when sol particles move towards opposite electrodes due to attraction. Tyndall effect will be observed due to scattering of light by colloidal particles. Coagulation takes place (due to neutralisation of charges.) Because bond dissociation enthalpy of H-S bond is lower that of H-O bond. / oxygen is more electronegative than S.
207

ii)

iii) 21 i)

1x3= 3

ii)

In the resonance structure of these two species, in NO2 , 2 bonds are sharing a double bond while in NO3 , 3 bonds are sharing a double bond which means that bond in NO2 will be shorter than in NO3 . Or

iii)

In NO2 , bond order is 1.5 while in NO3 , bond order is 1.33 Because of the tendency of oxygen to form multiple bonds with metal. Ambident ligand: a unidentate ligand which can co-ordinate to the central metal atom through more than one co-ordinating bond.e.g. NO2 , SCN The number of donor atoms in ligating groups is known as denticity of that ligand. 2 e.g. in C2O4 denticity is 2 (or any other example) Crystal field splitting in an Octahedral field: The splitting of d-orbitals under the influence of approaching ligand is known as crystal field splitting for example for 4 d , configuration is t2g 3eg1 / or diagrammatic representation. 1-Bromopentane > 2-Bromopentane > 2-Bromo -2-methyle butane. 1- Bromo-2 - methyl butane> 3-Bromo- 2-methyl butane> 2-Bromo-2-methyl butane 1- Bromobutane > 1-Bromo- 2-methyl butane> 1-Bromo-2, 2-dimethyl propane OH O
Na 2Cr2 O 7
H 2SO 4

1x3 = 3

22

i)

ii)

iii)

23

i) ii)

1 1

iii)

24

(i)

O OH (ii)
(i) CH COCH 3 CH3Mg Br (ii) 3 H O CH3
2

C CH3

CH3

(iii)

CH3 CH = CH2 (i) H 2O/H

CH3 CH CH3 OH

(or by any other suitable method.)

1x3 = 3

208

25

(i)

Due to resonance in aniline, N acquires + charge which increases its pKb whereas due to electron donating methyl group electron density increases on N which decreases its pKb. Due to formation of hydrogen bond with water ethyl amine is soluble in water whereas due to bulky phenyl group aniline does not form H-bond and thus is insoluble. Due to hydrogen bonding in primary amines, they have higher boiling points whereas there is no hydrogen bonding in tertiary amines. CH2 = CH2 CH2 = CHCI CF2 = CF2 Food preservatives: are the compounds which prevent spoilage of food due to microbial growth. eg: sodium benzoate, vinegar (or anyone example) Synthetic detergents are sodium salts of long chain alkyl sulphonates or benzene sulphonates. eg: Sodium Lauryl sulphate. Antacids: are the drugs used to prevent the overproduction of acid in the stomach. e,g, Sodium hydrogencarbonate. It is secondary cell Anode Reaction: - Pb + SO4 PbSO4(s) + 2e
2 + 2

(ii)

(iii)

1x3=3 1 1 1

26

i) ii) iii)

27

(i)

+ +

(ii)

(iii)

28

a)

Cathode. Reaction: - PbO2 + 4H + SO4 + 2e PbSO4 + 2H2O Net reaction:b) Pb + PbO2 + 2SO4 + 4H 2PbSO4 + 2H2O
2 + 2

[Cr3+] E cell = Eocell 0.0591 log 2 14 n [ Cr2O7 ][H +] (0.20)2 E cell = 1.33 V 0.0591 log 4 14 6 (0.10)(10 ) = 1.33V - 0.55V = 0.78V OR

1 1

209

a)

m = Zlt m= MxIxt nF M x 2A x 3 x 60 x 60 s 1 2 x 96500 Cmol

m=

m = 0.112 mol x M no. of moles of mercury = 0.112mol x M M = 0.112 mol b) 2Al+3Ni 2Al + 3Ni
2+ 3+

E cell = E Cathode- E anode = [-0.25 V- (-1.66 V)] = 1.41 V E cell = 1.41 V Nernst equation: 2Al+3Ni 2Al + 3Ni
2+ 3+ o

n=6 electrons Ecell = Eocell 0.059 log [Al ] 2+ 3 n [Ni ]

3+ 2

Ecell = 1.41 V

0.059 log ( 0.001 M) 6 (0.50 M)

= 1.41 V 0.059 [-5.097] log (104) 6 = 1.41 V+ 0.050 V = 1.46 V (a) ii)

210

b) i) ii) iii) 3HgCl2 + 2PH3 Hg3P2 + 6HCl SO3 + H2SO4 H2S2O7 6 XeF4 + 12H2O 4Xe + 2XeO3 + 24HF + 3O2 OR a) i) ii) b) 3Cl2 + 6NaOH 5NaCl + NaClO3 +3H2O 2Fe3+ + SO2 + 2H2O 2Fe2+ + SO4 + 4H
2 +

i) ii) iii)

Two, due to presence of two P-OH bonds. Due to high electronegativity of fluorine. There are no interatomic forces except weak dispersion forces.

30

a) i) Cannizzaro reaction: Aldehydes which do not have an -hydrogen atom, uhdergo self oxidation and reduction reaction on treament with concentrated alkali

(or any other correct equation) ii) Clemmensen reduction: The carbonyl group of aldehydes and ketones is reduced to CH2 group on treatment with zinc amalgam and concentrated HCI

1+1

211

b) i)

ii)

iii)

1x3 = 3

(Or by any other suitable method) OR (i) Benzoic acid and ethyl benzoate

Sodium bicarbonate test. Warm each compound with NaHCO3 , Bezoic acid gives brisk effervesence of CO2 gas whereas ethyl benzoate does not respond to this test (Other relevant test can be accepted) (ii) Benzaldehyde and Actophenone 1+1

Iodoform test: Warm each organic compound with I 2 and NaOH solution. with Acetophenone (C6H5COCH3) Yellow precipitates of iodoform is formed white Benzaldehyde does not respond to this test. (Other relevent test can be accepted) COCl b) (i) COCl (ii) iii) C6H5CH = NNHCONH2 a) B2H6. H2O2 /OH

b) PCC
212