VRC Product Sheet
VRC Product Sheet
VRC Product Sheet
Zinc based coating products on the market that claim to provide rust protection are generally zinc rich paints that at best act as expensive barrier coatings. They do not provide the electro-chemical galvanic action which is the key to corrosion protection. To function anodically, the zinc particles must be in intimate contact with one another so that the lm itself is conductive. Also the binder material must be such that it does not insulate the zinc particles from each other or from the base substrate (steel or iron) inhibiting galvanic action. This is achieved in the ZRC cold galvanizing compounds by the high zinc loading (95% by weight in the dry lm) and proprietary binder. ZRC Cold Galvanizing products have been around for more than 50 years and are the only coatings that have been certi ed by the Underwriters Laboratories as an equivalent of hot dip galvanizing. Major projects around the world such as the Peace Bridge over the Niagra River in N. America and the Aomori Cement Plant in Japan are proof of the trust and respect for ZRC cold galvanizing compounds. ZRC Cold Galvanizing compounds can be applied via dipping, spraying or brushing and, best of all, this can be done at the factory or job site. This is not possible with hot dip galvanizing. A gallon of ZRC Cold Galvanizing Compound will provide one coat of approximately 1.5 mil dry lm over 400 square feet of surface. Two coats are recommended for optimal protection. ZRC coatings meet or exceed recognized VOC standards. ZRC compounds have been formulated to tolerate the rigors of short and long distance shipping and will not settle out and compact. They can be easily stirred back into full dispersion.
Fifty years of proven success Equivalent to hot-dip galvanizing Single-component Battleship gray nish Apply by brush, roller or spray Meets VOC standards Available in clog-free aerosol form
technology Same superior performance as ZRC Cold Galvanizing Compound Over 40% lower in volatile organic compounds Lowest VOC zinc rich compound available
HQ - US : 2755 E. Oakland Park Blvd | Suite 300 | Fort Lauderdale, FL 33306 | USA | P: 954.566.0996 | F: 954.566.0633 INDIA : Doehle Danautic Logistics Pvt. Ltd. | Andheri, Mumbai-400053 | logistics@doehledanautic.com | + 91996 7453000 UAE : Transworld FZE | P.O. Box 261036 | Jebel Ali (South), Plot No. S 20119 | Dubai - UAE | + 971 4 803 5800
e-mail: info@liquiguard.com website: www.liquiguard.com
ADVANTAGES:
More impact resistant than hot-dip Galvanizes and primes in one easy coat Eliminates hot-dip embrittlement & warpage Will not clog threads - eliminates re-tapping No aking and separating when bent No costly transportation or down time Can be applied before or after fabrication Better job quality control and no size limitation
TEMP. TOLERANCE:
INTERMITTENT