Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 602 views

    Utc 8227 P

    Uploaded by

    Ariel Navarrete
    The UTC8227 is an audio power amplifier integrated circuit with two channels. It has a wide operating voltage range of 5-12V, low quiescent current of 21mA, and can output 2.5W per channel at 9V with less than 10% total harmonic distortion. It has features such as soft clipping protection, thermal shutdown protection, and a standby switch.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Utc 8227 P

    Uploaded by

    Ariel Navarrete
    602 views3 pages
    The UTC8227 is an audio power amplifier integrated circuit with two channels. It has a wide operating voltage range of 5-12V, low quiescent current of 21mA, and can output 2.5W per channel at 9V with less than 10% total harmonic distortion. It has features such as soft clipping protection, thermal shutdown protection, and a standby switch.

    Original Description:

    pdf

    Original Title

    utc8227p

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The UTC8227 is an audio power amplifier integrated circuit with two channels. It has a wide operating voltage range of 5-12V, low quiescent current of 21mA, and can output 2.5W per channel at 9V with less than 10% total harmonic distortion. It has features such as soft clipping protection, thermal shutdown protection, and a standby switch.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    602 views3 pages

    Utc 8227 P

    Uploaded by

    Ariel Navarrete
    The UTC8227 is an audio power amplifier integrated circuit with two channels. It has a wide operating voltage range of 5-12V, low quiescent current of 21mA, and can output 2.5W per channel at 9V with less than 10% total harmonic distortion. It has features such as soft clipping protection, thermal shutdown protection, and a standby switch.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    UTC8227

    LOW FREQUENCY POWER AMPLIFIER


    DESCRIPTION

    LI NEAR I NTEGRATED CI RCUI T

    The UTC8227 is the audio power amplifier with built-in two channel developed for portable radio cassette tape recorder with power ON/OFF switch.

    FEATURES
    *Wide operating supply voltage: Vcc=5~12V *Low quiescent supply current (Icc=21mA,typical,at Vcc=9V ,Vi=0) *Output power Po=2.50W/CH at Vcc=9V,RL=4ohm ,f=1kHz,Thd=10% *Soft Clip *Built-in Thermal shut-down protection circuit *Stand-by Switch

    HDIP-12

    TEST CIRCUIT
    SW1 1000F 100F Vcc2

    Vcc1

    12 3
    Boot strap 1
    100F 1000F

    Input 1

    6
    NF1
    47F 120

    Output 1

    5 9

    45 30k

    0.015F

    RL

    Ripple
    47F

    7
    Input 2 NF2

    100F

    10 11

    Boot strap 2
    1000F

    Output 2

    8
    47F 120

    0.015F

    45 30k

    RL

    TAB
    Pre GND

    4
    Power GND

    YOUW ANG ELECTRONI CO. CS LTD

    UTC8227
    Characteristic
    Supply Voltage Output Current Power Dissipation(note) Operating Temperature Storage Temperature Note: Value for mounting on PC board

    LI NEAR I NTEGRATED CI RCUI T


    Symbol
    Vcc Io Pd Topr Tstg

    ABSOLUTE MAXIMUM RATINGS(Ta=25C)


    Value
    20 2.5 4 -20 ~ +75 -55 ~ +150

    Unit
    V A W C C

    ELECTRICAL CHARACTERISTICS
    (Ta=25C,Vcc=9V,RL=4,Rg=600,f=1kHz,unless otherwise specified)

    Characteristic
    Quiescent current Output Power Total Harmonic Distortion Voltage Gain Input Impedance Output Noise Voltage Ripple Rejection Ratio Cross Talk Input Offset Voltage Standby Current

    Symbol
    Icc Po THD Gv1 Gv2 Rin Vno R.R C.T V7,8 Vi=0

    Test Conditions
    THD=10%,RL=4 THD=10%,RL=3 Po=0.4W/CH Rf=120,Vout=0.775Vrms Rf=0,Vout=0.775Vrms

    Min
    2.0

    Typ
    21 2.5 3.0 0.2

    Max
    45

    Units
    mA W W

    1.0 47

    % dB

    43

    45 56.5 30

    Rg=10k,BW=20Hz~20kHz Rg=600 fripple=100Hz

    0.3 52 50 30

    1.0

    mVrms dB dB

    Rg=600,Vout=0, f=1kHz

    60

    mV A

    Sw1:OFF

    YOUW ANG ELECTRONI CO. CS LTD

    UTC8227
    ICCQ, V2,V10 vs. VCC1
    15 15 10

    LI NEAR I NTEGRATED CI RCUI T


    THD vs Output Power Total Harmonic Distortion (%) Cross Talk vs. Frequency
    Vcc=9V RL=4 RNF=120 Rg=620 Vout=0dBm

    TYPICAL PERFORMANCE CHARACTERISTICS


    Vcc1=12V Vin=0 Ta=25k 6V

    Quiescent current (mA)

    12

    ICCQ

    12

    Output Voltage (V)

    Cross Talk (dB)

    Vcc1=9V RL=4 f=1kHz RNF=120 Ta=25k

    Vcc2=5V

    9V

    -20

    -40

    V10,V2,

    -60

    0 0 3 6 9 12 15

    0.1 0.01 0.1 1 10

    -80 1 10 2 10 3 10 4 10 5 10

    Supply Voltage , Vcc2 (V)

    Output Power (W)

    Frequency ( Hz)

    ICCQ, DC Vout vs. Supply Voltage


    100 20

    Voltage Gain vs. Frequency

    Ripple Rejection vs. frequency

    Vin=0

    Quiescent current (mA)

    80

    16

    80

    Output Voltage (V)

    Voltage Gain (dB)

    Voltage Gain (dB)

    Vcc=9V RL=4 RNF=120

    60

    12

    60

    -20

    Vcc=9V RL=4 RNF=120 Rg=620

    Vout
    40 8

    40

    -40

    20

    ICCQ

    20

    -60

    0 0 5 10 15 20 25

    0 1 10 2 10 3 10 4 10 5 10

    -80 1 10 2 10 3 10 4 10 5 10

    Supply Voltage , Vcc2 (V)

    Frequency ( Hz)

    Frequency ( Hz)

    APPLICATION INFORMATION 1.Input Voltage


    When the excessive signal is input, turning-up is produced in the clip waveform. The turning-up point is Vin=300mVrms(Typical) at Vcc=9V,RL=4 f=1kHz. Enough care must be taken for this phenomenon.

    2.Power ON/OFF
    There is power ON/OFF switch at pin 1. However output power is changed by pin 1 supply voltage when pin1 supply voltage is not same pin 12 supply voltage, after referring to attached date, select pin 1 supply voltage.

    3.Voltage Gain
    The voltage gain can be changed by the external negative feedback resistor. When Rf=0, the Gain is equal to 56.5dB.When Rf=120 the Gain is equal to 45dB.

    YOUW ANG ELECTRONI CO. CS LTD

    You might also like