GEAS

GENERAL ENGINNERING AND APPLIED SCIENCE ECE Pre Board Exam
1.
What kind of chemical bond will form in binary compounds where the electronegativity difference between atoms is greater than 2.0? A. B. C. D. Ionic bond Covalent bond 6.
C. D.
Homologues Isobars
It describes the luminous flux incidence per unit area and is expressed in lumens per square meter A. Illuminance Luminance Luminous intensity Radiance
Metallic bond B. Chemical bond C. D. 7.
2.
The principle of the constant composition of compounds, originally called Prouts Law is known as A. B. C. D. The law of multiple proportion The law of definite proportion The law of conservation of mass The law of compounds
The quantity known as specific heat is based on: A. B. C. The increased in temperature due to induction The heat needed for one pound of water to boil The heat needed to increase the temperature to one gram of a substance one degree Celsius The amount of heat required to melt one kg of lead.
3. What kind of chemical bond will form in binary

compounds where the electronegativity between atoms is less than 1.5? A. B. C. D. 4. Covalent bond Ionic bond Super bond Electrovalent bond 9. difference
D.
8. Sound above the frequency of 20 kHz is called

A. B. C. D. Supersonic sound Infrasonic sound Hypersonic sound Ultrasonic sound
The particles in the nucleus, namely the neutrons and the protons, are collectively referred to as A. B. C. D. Positrons Electrodes Nucleons Isotope
The root mean square speed of the molecules of a gas is A. B. C. Independent of its pressure P Directly proportional to square root of P Directly proportional to the square root of its temperature T Proportional to T
D.
5. The atoms having different atomic numbers but the same

mass number are called A. B. Isotones Isotopes
10. When waves go from one place to another they transport A. B. C. Energy and matter Wavelength and matter Frequency only
D.
Energy only
A. B. C. D.
Weight Pressure Density Specific gravity 17. The condition in which there is no change in pressure at any point of the system with time.
11. A measure of resistance of the body it offers to any

change in its angular velocity, determined by its mass and distribution of its mass about the axis rotation is known as __________. A. B. C. D. Moment of inertia Friction Torsion Angular acceleration
A. B. C. D.
Thermal equilibrium Phase equilibrium Mechanical equilibrium Chemical equilibrium 18. The energy that a system possesses as a result of its elevation in a gravitational field is called
12. A freely falling body is a body in rectilinear motion and width constant _________. A. B. C. D. Velocity Speed Deceleration Acceleration
13. When a planet moves around the sun, A. B. C. D. The angular momentum remains conserved The angular speed remains constant The linear velocity remains constant The linear momentum remains constant A. B. C. D. Kinetic energy
Gravitational energy Potential energy Mechanical energy 19. A vapor that is about to condense is called
14. As the angle between two concurrent forces decreases from 180, their resultant A. B. C. D. Decreases Increases Unchanged Cannot be determined A. B. C. D. Saturated vapor Plasma Super heated vapor Saturated liquid
15. The moment of inertia of a triangle with respect to its

base b is
A. b2h2/12
B. C. D. bh3/6 bh3/12 bh3/3 A. B. C. D. Temperature Pressure Energy Work
20. The area under the process curve on a PV diagram represents the boundary
16. Mass per unit volume is
21. Interaction between

the surfaces of two closely adjacent bodies which causes them to cling together is known as A. B. C. D. Friction Cohesion Adhesion Viscosity 22. When a body is resistant to heat, it is called A. B. C. D. Thermoscopic Thermotropic Thermoduric Thermoplastic
A. B. C. D.
Rupture stress Elastic limit Ultimate stress or ultimate strength Proportional limit
27. The actual stress that material has when under load is called A. B. C. D. Working stress True stress Allowable stress Normal stress
28. The point on the stress-strain diagram at which there is an appreciable elongation or yielding of the material without any corresponding increase of load is called A. B. C. D. Yield point Elastic limit Ultimate stress or ultimate strength Proportional limit
23. Which of the following statements is correct concerning the passage of white light into a glass prism? A. B. C. D. The violet color travel faster than the red color The violet color travels slower than the red color All the colors of white travel the same speed Greater the wavelength, slower the speed color
29. It describes the volume elasticity of the material A. B. C. D. Bulk modulus Youngs modulus or tensile modulus Modulus of compressibility Shear modulus
24. The property of an object that determines the direction of heat flow when in contact with another object is called A. B. C. D. Calidity. Pyrexia Caloric Temperature
30. At the highest or lowest point on moment diagram A. B. C. D. Maximum shear occur Shear is zero Maximum moment is twice the shear Shear is negative
25. If a material is feebly repelled by a magnet it is A. B. C. D. Diamagnetic Paramagnetic Ferromagnetic Pyromagnetic
31. The modulus of elasticity of steel is A. B. C. D. 200 GPa 225 MPa 350 MPa 500 MPa
26. The highest ordinate on the stress-strain curve is called
32. An economic condition in which there are so few supplies of a particular product that one suppliers actions significantly affect prices and supply.3 A. Oligopoly
A. B. C. D.
Construction Sales Consulting Government
B. Monophony
C. D. Monopoly Perfect competition
38. These are plans intended to cover a period of less than

one year, First-line supervisions are mostly concerned with these plans. A. B. C. D. Short-range plans Long-range plans Standing plans Single-use plans
33. The place where buyers and sellers come together A. B. C. D. Market Store Bargain center Port
34. The amount that the property would give if sold for junk
A. B. C. D. Junk value Salvage value Scrap value Book value
39. A committee created for a short-term purpose and have a limited life. A. B. C. D. Ad hoc committee Standing committee Sinking committee Midget committee
35. A series of uniform payment over an infinite period of time A. B. C. D. Depletion Capitalized cost Perpetuity Inflation
40. Refers to the process of activating behavior, sustaining it, and directing it toward a particular goal. A. B. C. D. Suppression Motivation Praising Unification
36. These are products or services that are desired by human and will be purchased if money is available after the required necessities have been obtained. A. B. C. D. Commodities Necessities Luxuries Supplies
41. The process of determining the physical arrangement of the production system. A. B. C. D. Work-flow layout Quality control Inventory control Purchasing and material management
42. A type of risk in which there is only a chance of loss. A. B. C. Pure risk Speculative risk Single time risk
37. A function of an engineer where the engineer works as consultant of any individual or organization requiring his services.
D.
One shot risk
C. D.
PIECEP Organization of PECE
43. A stage of a contract that includes all the initial stages up to the time the parties agree upon the terms of the contract. A. B. C. D. Preparation or conception Perfection or birth Consummation or termination Deliberation
48. The seal of Professional Electronics Engineer as provided

by Section 29, Article IV of R.A. No. 9292 shall be, a dry circular seal containing the appearance of ________ in the upper part of the inner circle. A. B. C. D. Atom Electron Radar transceiver Computer
44. For outside plant telephone poles and manholes as well as customer premises, the ground resistance must never exceed _______. A. B. C. D. 25 ohms 3 ohms 43 ohms 5 ohms
49. Within Metro Manila, Class D airtime classification in AM radio within: A. B. 5:00 AM to 9:00 AM / 4:00 PM to 7:00 PM 5:00 AM to 4:00 PM / 7:00 PM to 9:00 PM
C. 9:00 PM to 12 Midnight
D. 12 Midnight to 5:00 AM
45. A device designed to protect apparatus from high transient voltage, by diverting surge current to ground and capable of repeating this function as specified. A. B. C. D. Lightning ball Lightning arrester Fuse Lightning protector
50. The range of frequencies reclassified for the extension of UHF TV broadcast band under MC 04-07-2005 is ________. A. B. 54 88 MHz 174 470 MHz
C. 674 698 MHz

D. 544 594 MHz
46. A riser system that consist telephone terminal

cabinets/closets vertically or non-vertically aligned, usually beginning at the ground floor and extending throughout the height of the building. A. B. C. D. Open riser Elevated riser Closed riser Underground riser
47. The integrated and accredited national organization of Professional Electronics Engineers, Electronics Engineers and Electronics Technicians. A. B. IECEP Accredited Professional Organization

GEAS

Uploaded by

Copyright:

Available Formats

GEAS

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GEAS

Uploaded by

Copyright:

Available Formats

GENERAL ENGINNERING AND APPLIED SCIENCE ECE Pre Board Exam

Metallic bond B. Chemical bond C. D. 7.

3. What kind of chemical bond will form in binary

8. Sound above the frequency of 20 kHz is called

5. The atoms having different atomic numbers but the same

11. A measure of resistance of the body it offers to any

15. The moment of inertia of a triangle with respect to its

16. Mass per unit volume is

21. Interaction between

25. If a material is feebly repelled by a magnet it is A. B. C. D. Diamagnetic Paramagnetic Ferromagnetic Pyromagnetic

26. The highest ordinate on the stress-strain curve is called

Construction Sales Consulting Government

38. These are plans intended to cover a period of less than

One shot risk

PIECEP Organization of PECE

48. The seal of Professional Electronics Engineer as provided

C. 674 698 MHz

46. A riser system that consist telephone terminal

You might also like