1015
1015
1015
Your benefits:
u u u u u
Its outstandingly low noise radiation is exemplary. Acoustically relevant components with a very rigid structure. This gives genset packagers an advantage over their competitors. Environmentally friendly, high-tech combustion ensures not only excellent operating behaviour but also outstanding savings in operating costs. The control function of the electronic governor makes it possible to plan service intervals, for example no costly downtimes. Compact design saves installation space and thus installation costs. Radiator dimensions reduced by 30 % with raised fan. Low exhaust emission, the 1015 engine series meets TA-Luft standards.
u Technical data
Engine type Speed Frequency Engine/genset ratings
1)
BF6M 1015 C
1500 50 1800 60
BF6M 1015 CP *)
1500 50 1800 60
BF8M 1015
1500 50 1800 60
BF8M 1015 C
1500 50 1800 60
BF8M 1015 CP *)
1500 50 1800 60
Continuous power, ICN (COP) 2) Prime power, ICN (PRP) 3) Limited-time running power, IFN (LTP)
4)
Typical generator power output (COP) 5) Typical generator power output (PRP) 5) Typical generator power output (LTP) 5) Basic engine data Inertia moment J - Engine without flywheel - Flywheel Weight, engine without radiator Governing Governor mechanical - Speed droop (static) Governor electronic - Speed droop (static, option) Control quality mechanical Control quality electronic 7) Load acceptance
8) 7)
kg/m 2 kg/m 2 kg
Bosch / RQV
Bosch / RQV 35 0 G2 G3 35 0 G2 G3
Bosch / RQV 35 0 G2 G3 35 0 G2 G3
Bosch / RQV 35 0 G2 G3 35 0 G2 G3
Bosch / RQV 35 0 G2 G3 35 0 G2 G3
Bosch / RQV 35 0 G2 G3 35 0 G2 G3
% %
35 0 G2 G3
35 0 G2 G3
GAC / EMR
GAC / EMR
GAC / EMR
GAC / EMR
GAC / EMR
GAC / EMR
Recovery time at 70 % continuous power (COP) **) Fuel system Specific fuel consumption at COP 9) 100 % load 75 % load 50 % load 25 % load Cooling system/cooling capacity Coolant volume engine Cooling air flow rate Max. permissible air flow resistance Max. coolant temperature at engine outlet (alarm) Lubrication system Lube oil consumption relative to fuel consumption at full load Lube oil specification Lube oil volume, oil pan (max./min.) Oil temperature max. Full-flow filter Min. oil pressure (shutdown)
sec.
1.5
1.8
1.5
1.8
1.5
1.8
1.5
1.8
1.5
1.8
1.5
1.8
l m3/s mbar
approx. % l
0.3
0.3
C
No. / l. bar
No measuring point
u Technical data
Engine type Speed Frequency Combustion air system Combustion air volume (COP ) Max. intake vacuum (filter clean) Exhaust system Exhaust gas mass flow at full load (COP) kg / h Exhaust temperature at full load and 25 C ambient temperature Max. permissible exhaust backpressure Exhaust flange TA-Luft (4000) Engine electrics Electrical equipment: - Voltage - Starter - Alternator - Battery (min. capacity) Cold-start capability Cold-start limit temperature: - with starting aid 10) - without starting aid 10) Noise emission
11)
BF6M 1015 C
1500 50 1800 60
BF6M 1015 CP *)
1500 50 1800 60
BF8M 1015
1500 50 1800 60
BF8M 1015 C
1500 50 1800 60
BF8M 1015 CP *)
1500 50 1800 60
m3/ h mbar
934 20
1132 20
1221 20
1507 20
1333 20
1700 20
1129 20
1480 20
1627 20
2013 20
1806 20
2190 20
C
mbar mm mg / nm 3
V kW A/V Ah
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 55 /28 88
24 5.4 88
24 5.4 88
55 /28 55 /28
C C
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
-21 -15
dB(A)/1pW dB(A)
107 93.5
109 95.5
108 94.5
110 96.5
108.5 95
110 97
110.5 96.5
112.5 96.5
111 97
113 99
112 97
114 99
1) Power reduction caused by altitude and temperature possible. Power ratings without fan power requirement. For more details please contact DEUTZ. 2) Continuous power 100 % available at flywheel, no time limitation, plus 10 % extra power for governing purposes. 3) Prime power 100 %, permissible average power output 80 %, no time limitation plus 10 % extra power for governing purposes. 4) Limited-time running power 100 %, which can be delivered during 500 running hrs/year, thereof max. 300 running hrs/year continuously, no overload permissible; the required extra power for governing purposes must be taken into account, however. 5) Taking into account a typical generator efficiency (0.95) and power factor cos ( ) = 0.8. 6) Belt-driven fan and small radiator. 7) Performance acc. to ISO 8528. 8) The load acceptance characteristics are dependent on the inertia moment of the generator, the voltage regulator and the type of load. 9) Fuel specification: see operation manual. 10) Optional. 11) Without cooling system. *) TA-Luft (2000). **) With electronic governor. The values given in this data sheet are for information purposes only and not binding. The information given in the offer is decisive.
u Dimensions
E D B
A Engine type BF6M 1015 mm A 1068 1185 1068 1185 B C D E 462 462 462 462
932 1762 466 948 1643 505 932 1762 466 948 1643 505
u Standard specification
Standard engine:............. Basic parts Cooling system: ............... LT cooling system / intercooler Pusher-type fan (raised) Viscous fluid coupling Guard, shroud, expansion tank Exhaust system components:..................... Turbocharger (flywheel end) with counterflange Without exhaust silencer Filter: ................................... Air cleaner mounted with mech. restriction indicator Fuel twin filter (loose) without prefilter Governor:........................... Mech. or electronic governor Fine speed control Flywheel: ........................... Flywheel for 14 connection J = 2.264 kgm2 Engine mounting:........... Rigid engine mounting, opp. flywheel end Engine electrics: .............. Electric engine shutdown (de-energized for shutdown) Starter motor 24 V, 5.4 kW Alternator 28 V, 55 A Oil pressure monitoring: sensor with switch contact Break contact, switch point 3.0 bar Coolant temperature monitoring (sensor) Coolant level monitoring (mech. float switch) Without cable harness and without connector Miscellaneous:................. Painting Without operation manual
0031 1663 / 03 / 2001 / VM-W
DEUTZ AG Deutz-Mlheimer Str. 147-149 D-51057 Kln Phone: + 49 (0) 2 21-8 22-0 Fax: + 49 (0) 2 21-8 22-25 68 Internet: http://www.deutz.de
E-mail: Info@deutz.de
Order No.