BRC Catalogue

the essential guide to reinforcing concrete
Bar & fabric products Spacers & accessories Slab products Formwork Weldmesh and gabions
2007
We reserve the right to substitute any product described in this catalogue with a similar product of the same or better quality without prior notice. Similarly, products supplied may differ from the profiles illustrated, but will offer the same functionality. Please note: drawings are for reference only and are not to scale. Usage information, where offered, is for guidance only. Errors and omissions excepted. March 2006.
the essential guide to reinforcing concrete

Bar & fabric products
p5-15
Spacers & accessories
p16-19
Slab products
p20-26
Formwork
p27-29
Weldmesh & gabions
p30-31
Customer service, quality systems, technical support, competitive prices

BRC is the UKs largest supplier of steel reinforcement and associated products for concrete. With a network of strategically placed manufacturing locations, we are able to meet all your requirements regardless of the size of project.
We have tried to make this catalogue as comprehensive as possible, but cannot include every single item from our huge product range. So, if you do not see the product you are looking for, please give us a call. You will find contact numbers for all our sales offices at the bottom of every page.
I Quality Management systems to BS EN ISO 9001:2000 I National coverage I CARES approved at all locations I After sales support I Dedicated contract management I Technical support I Capacity to handle all sizes of project I Competitive pricing I Commitment to total customer service
Contract management
A nationwide network of dedicated, professional teams monitor the flow of information from site call-off, through manufacturing to point of delivery, to ensure that your requirements are fully met.
850303
Sales offices:
Midlands North North East
01623 555111 01226 730330 01325 381166
North West South South East
0161 620 1001 01794 521158 020 7474 1800
South West 01752 894660 Scotland 01698 732343 Wales & West 01633 244002
Cut and bent reinforcement

I High yield reinforcing bar to BS4449:2005 in diameters 8mm to 40mm*. I 6mm and 50mm are non-preferred sizes available to special order. I Strategically placed manufacturing and distribution locations throughout the UK. I All cut and bent reinforcement conforms to the relevant British Standard.
* BS4449:2005 does not cover mild steel
850303
Prefabricated reinforcement
BARWELD
Industrial and piled foundations
BRC offer a prefabricated solution tailored to suit individual needs. Whether it is to speed construction or solve skill shortages, BRC can provide the answer. By recognising that the skill level on sites will vary, BRC are able to offer a solution that can be easily applied.
Housing
I A range of
I Heavy duty
solutions are available to suit site skill levels.

I Can be supplied
solutions.
I A range of splice
details are available.

I Beam sizes can be
in packages for ease of planning.
detailed to suit lifting equipment.
Bases and pile caps

I Single piece
Bar mats
I Heavy bars
units for speed of placing.

I Larger units can
can be converted to mats for faster construction cycles.

I Sheet sizes can
be supplied in sections.
I Pile cages are
also available.
be detailed to suit specific applications.
Reinforcement solutions
The pressures of todays construction industry continue to require innovative solutions. Skill shortages, confined sites and the demands for faster construction, all need clear thinking.
BRC have accumulated a wealth of experience in this field, and can support you through all stages from design to construction. Our engineering teams will work with you to identify a solution that meets your needs. For projects ranging from a house extension to a high-rise apartment scheme, we can offer an extensive package utilising those products and services that will give you the best result.
To explore the opportunity to save time and money, please contact your local BRC sales office
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Reinforcement shape codes to BS8666:2005

Stock lengths
Semi-circular (C)
A
A
(B)
(B)
L=A
L=A
L=A + (B) 0.5r d
L=A + (B) 0.43R 1.2d
L=A + 0.57B + (C) 1.6d
SHAPE CODE 00
A B
SHAPE CODE 01
A
B
A
SHAPE CODE 11
SHAPE CODE 12
B
A
SHAPE CODE 13
(C)
Semi-circular
(C)
(C)
(C)
(D)
L=A + (C) - 4d
L=A + (C)
L=A + B + (C) r 2d
L=A + B + C + (D) 1.5r 3d
L=A + B + (C) r 2d
SHAPE CODE 14
(C)
SHAPE CODE 15
SHAPE CODE 21
(C)
SHAPE CODE 22
B
SHAPE CODE 23
B (C) D
B D
B D
A (C) D
D B A
(E)
L=A + B + (C)
L=A + B + (E)
L=A + B + (C)
L=A + B + (C) 0.5r d
L=A + B + (C) 0.5r d
SHAPE CODE 24
(C) B
D
B
SHAPE CODE 25
A
SHAPE CODE 26
A
SHAPE CODE 27
(C)
SHAPE CODE 28
C
B
(D)
B
Semicircular
(E) D
(D)
A
L=A + B + (C) r 2d
L=A + B + C + (D) 1.5r 3d
L=A + B + C + (D) 1.5r 3d
L=2A + 1.7B + 2(C) 4d
L=A + B + C + (E) 0.5r d
SHAPE CODE 29
C
SHAPE CODE 31
(D)
SHAPE CODE 32
A (E)
SHAPE CODE 33
A
SHAPE CODE 34
A (E) B B D
(E)
C
A E
B D
(E) B C D
D
A
B
L=A + B + C + (E) 0.5r d
L=A + B + C + (D) r 2d
L=A + B + C + D + (E) 2r 4d
L=A + B + C + D + (E) 2r 4d
L=A + 2B + C + (E)
SHAPE CODE 35
(C) A (D)
SHAPE CODE 36
(C) (D)
SHAPE CODE 41
C D
SHAPE CODE 44
(C) A (D)
SHAPE CODE 46
A
(F)
D B
(E)
B
B
(F) E
L=2A + B + 2(C) + 1.5r 3d
L=2(A + B + (C)) 2.5r 5d
L=A + B + C + D + 2(E) - 2.5r - 5d
L=2A + 3B + 2(C) 3r 6d
L=A + B + C + 2D+E + (F) 3r 6d
SHAPE CODE 47
A
SHAPE CODE 51
A
SHAPE CODE 56
SHAPE CODE 63
A
SHAPE CODE 64 All other shapes are Shape Code 99 and require fully dimensioned sketches.
B
B
B
B (D) Isometric sketch
(B) B is the overlap
C = number of turns
L=A
L= (Ad) + B
L=C(A d)
L=A + 2B + C + (D) 2r 4d
SHAPE CODE 67
SHAPE CODE 75
SHAPE CODE 77
SHAPE CODE 98
850303
Table of minimum dimensions

5d P
Nominal size
Minimum radius for scheduling
Minimum diameter for bending former
(B)
Sales offices:
6
6* 8 10 12 16 20 25 32 40 50 *
12 16 20 24 32 70 87 112 140 175
24 32 40 48 64 140 175 224 280 350
Minimum end projection (P) General Links where (min. 5d straight) bend <150 (min.10d straight) 110 110 115 115 120 130 125 160 130 210 190 290 240 365 305 465 380 580 475 725
*6mm and 50mm are non-preferred sizes available to special order

Midlands North North East 01623 555111 01226 730330 01325 381166 North West South South East 0161 620 1001 01794 521158 020 7474 1800 South West 01752 894660 Scotland 01698 732343 Wales & West 01633 244002
Reinforcing bar technical data

Weight per m2 in one direction (add both directions for total m2 weight) BAR SIZE SPACING OF BARS (mm) (mm) 75 100 125 150 175 200 1.110 1.973 3.083 4.439 7.892 12.331 19.267 31.567 49.323 77.067 225 0.986 1.754 2.740 3.946 7.015 10.961 17.126 28.059 43.843 68.504 250 0.888 1.578 2.466 3.551 6.313 9.865 15.413 25.253 39.458 61.654 275 0.807 1.435 2.242 3.228 5.739 8.968 14.012 22.958 35.871 56.049 300 0.740 1.315 2.055 2.959 5.261 8.220 12.845 21.044 32.882 51.378
6* 2.959 2.220 1.776 1.480 1.268 8 5.261 3.946 3.157 2.631 2.255 10 8.220 6.165 4.932 4.110 3.523 12 11.838 8.878 7.103 5.919 5.073 16 21.044 15.783 12.627 10.522 9.019 20 32.882 24.661 19.729 16.441 14.092 25 51.378 38.534 30.827 25.689 22.019 32 84.178 63.133 50.507 42.089 36.076 40 131.528 98.646 78.917 65.764 56.369 50 * 205.512 154.134 123.307 102.756 88.077 *6mm and 50mm are non-preferred sizes available to special order Sectional area (mm2) of bars per metre width for various c/c (mm) C/C (mm) 75 100 125 150 175 200 250 300 350 400 450 500 6* 377 283 226 189 162 142 113 94.3 80.9 70.8 62.9 56.6 8 671 503 402 335 287 252 201 168 144 126 112 101 10 1050 785 628 523 449 393 314 262 224 196 174 157 12 1510 1130 905 754 646 566 452 377 323 283 251 226 16 2680 2010 1610 1340 1150 1010 804 670 575 503 447 402
20 4190 3140 2510 2090 1800 1570 1260 1050 898 786 698 628
25 6550 4910 3930 3270 2810 2450 1960 1640 1400 1230 1090 982
32 10700 8040 6430 5360 4600 4020 3220 2680 2300 2010 1790 1610
40 12600 10100 8380 7180 6280 5030 4190 3590 3140 2790 2510
50* 15700 13100 11200 9820 7850 6540 5610 4910 4360 3930

Properties of high yield bars Size (mm) Dims (max O/A mm) Mass (kg per m) Metres per tonne 6* 7 0.222 4504 8 10 0.395 2531 10 12 0.616 1623 12 14 0.888 1126 16 19 1.579 633 20 23 2.466 405 25 29 3.854 259 32 37 6.313 158 40 46 9.864 101 50* 58 15.413 64

Radius of bending Reinforcement to be formed to a radius exceeding that specified in the table below shall be supplied straight. The required curvature may be obtained during placing. For shapes with straight and curved lengths (e.g. shape codes 13 and 33) the largest practical radius for the production of a continuous curve is 200mm, and for larger radii the curve may be produced by a series of short straight sections. Bar size (mm) Radius (m) 6* 2.50 8 2.75 10 3.50 12 4.25 16 7.50 20 14.00 25 30.00 32 43.00 40 58.00 50* 75.00

Tolerances on cutting & bending dimensions The tolerances for cutting and/or bending dimensions shall be in accordance with the table to the right and shall be taken into account when completing the schedule. The end anchorage or the dimension in parentheses in the shape codes specified in the table opposite shall be used to allow for any permissible deviations resulting from cutting and bending. Cutting & bending tolerances Cutting of straight lengths Bending 1000mm > 1000mm to 2000mm > 2000mm Tolerance (mm)
(incl. reinforcement for subsequent bending) +25 -25
+5 - 5 +5 -10 +5 -25
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Standard fabric
Electrically welded fabric to BS4483:2005 All standard sheets (A, B, C and D) are 4.8 x 2.4m. A142, A193, A252, A393 and B785 are also available in merchant size sheets 3.6 x 2.0m. See below for Flying End range.
BS8666:2005 FABRIC BRC REF.
MESH SIZE NOMINAL PITCH OF WIRES
DIAMETER OF WIRE
CROSS SECTION AREA PER METRE WIDTH
NOMINAL MASS PER m2
NO. OF SHEETS PER TONNE
Main mm Square mesh A393 A252 A193 A142 Structural mesh B1131 B785 B503 B385 B283 Long mesh C785 C636 C503 C385 C283 Wrapping mesh D98 D49 200 200 200 200 100 100 100 100 100 100 100 100 100 100 200 100
Cross mm 200 200 200 200 200 200 200 200 200 400 400 400 400 400 200 100
Main mm 10 8 7 6 12 10 8 7 6 10 9 8 7 6 5 2.5
Cross mm 10 8 7 6 8 8 8 7 7 6 6 6 6 6 5 2.5
Main mm2 393 252 193 142 1131 785 503 385 283 785 636 503 385 283 98 49
Cross mm2 393 252 193 142 252 252 252 193 193 70.8 70.8 70.8 70.8 70.8 98 49
kg 6.16 3.95 3.02 2.22 10.90 8.14 5.93 4.53 3.73 6.72 5.55 4.51 3.58 2.78 1.54 0.77 15 22 29 40 8 11 15 20 24 13 16 21 26 34 57 113
Standard Flying End fabric

BRC Flying End fabrics are stocked in many British Standard references, offering considerable benefits over traditional fabric sheets: I Accurate cover extended overhangs can eliminate wire build-up at laps. I Faster laying cycle simplified lap details improves speed of laying and assists checking. I Reduced wastage in certain cases, larger sheet sizes can reduce on-site cutting and waste. I Increased flexibility reducing the lap build-up allows improved flexibility when positioning BRC circular spacers. I Reduced quantity the larger sized sheets and the use of deformed wire can reduce lap lengths and overall quantity of fabric.
The standard Flying End fabric range comprises:

B.S. FABRIC REF. SHEET SIZE (m) MAIN WIRE O/H (mm) CROSS WIRE O/H (mm)
A Types A Types B Types
5.9 x 2.3 4.8 x 2.4 4.8 x 2.4
100/400 100/500 100/500
100/400 100/500 50/350
930102
Sales offices:
8
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Made-to-measure and tailored fabric reinforcement

BRC made-to-measure fabric reinforcement BRC can manufacture standard A, B & C types in sizes to suit your application (subject to machine capability, transport and handling on site). With or without Flying Ends, a more cost effective solution can be achieved by reducing cutting, wastage and lapping congestion. BRC tailored fabric reinforcement Designed to suit specific projects, BRC can provide mesh that offers an alternative to conventional loose rebar. Supplied with or without Flying Ends, reinforcement in various diameters can be offered in sheet sizes to suit your contract (subject to machine capability, transport and handling on site).
OL1,OL2 OL3, OL4 LL LC PL PC
Overhangs of longitudinal wires Overhangs of cross wires Length of longitudinal wires (not necessarily the longest wires in the sheet) Length of cross wires Pitch of longitudinal wires Pitch of cross wires
930102
One directional fabric

A cost-effective alternative to loose rebar in heavily reinforced areas.
Cut and bent fabric

Standard, Flying End and made-to-measure fabrics can be supplied cut to size or bent. Most British Standard shape codes can be accommodated but it may be necessary to manufacture them in sections for ease of transportation or to enable the shape to be completed.
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Ancon Reinforcing Bar Couplers - strong, fast and easy to use Tapered thread range
Standard Series - Connects rebars of the same diameter
Positional Series -For use where the continuation bar cannot be rotated
I Suitable for the majority of rebar joining applications I Fast and simple to install I Tested and approved by UK CARES to show compliance with BS8110 I Full destructive tests carried out to demonstrate compliance with BNFL Specification E45 and BNF.ES.0039_I_B Category B
TAPERED THREAD RANGE GROUP CBB32
Transition Series - Connects rebars of different diameters
Bar Diameter Standard Series Positional Series Transition Series
12
16
20
25
32
40
50

MBT range
ET Series - Connects rebars of the same diameter
I I I I
Continuity Series - For use in phased construction
Transition Series - Connects rebars of different diameters
No bar end preparation required Installation requires no specialist equipment No bar rotation required The ET Series is the only BBA approved rebar coupler I Suitable for use on imperial, plain round or deformed bar I Ideal for remedial applications where replacement of damaged or corroded bar is necessary
MBT RANGE GROUP CBB30
Bar Diameter ET Series Headed Anchor - Provides dead end embedment for bars in concrete Continuity Series Transition Series Headed Anchor
10
12
16
20
25
32
40
50

Bartec range
Type A - Used where the continuation bar can be rotated
I Quick and easy to install I Designed for use on large scale, high coupler volume projects I Tested to demonstrate compliance with BNFL Specification E45 and BNF.ES.0039_I_B Category A and BS8110, providing a full strength bar break connection.
BARTEC RANGE GROUP CBB12
Type B - Used where it is difficult but not impossible to rotate the continuation bar
Bar Diameter Type A Type C - Used where the continuation bar cannot be rotated Type B Type C
12
16
20
25
28
32
36
40
50

w w w. a n c o n . c o . u k
Sales offices:
10
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Ancon Eazistrip - Reinforcement Continuity System Ancon Eazistrip

The Ancon Eazistrip Reinforcement Continuity System is a quick and easy to install method of maintaining continuity of reinforcement at construction joints in concrete. It consists of a galvanised steel casing with a dimpled surface to provide an effective concrete bond. Pre-bent bars are housed within the casing and are enclosed by a protective cover. Each end of the unit is sealed with a polystyrene block in order to prevent the ingress of concrete. The unit is nailed to the formwork and the concrete is cast. After striking the formwork, the cover is removed and the bars straightened, ready for lapping onto the main reinforcement.
Benefits
I I I I I Accelerates the construction process Simplifies formwork design Removes the need to drill shuttering Casing protects bars until required Risk of site injuries from projecting bars is minimised I Easy to install by site operatives
Applications
I I I I I I I Floor slabs Walls Stairwells Corbels Diaphragm walls Jumpforms Brick support ledges
Eazistrip Reinforcement Continuity Systems are manufactured using CARES approved bar which meets the requirements of BS4449.
ANCON EAZISTRIP GROUP CEE40
Type H Hook (standard in 60mm and 80mm box) h b b l
Type 2H Double Hook (not available in 60mm & 80mm box) h l
Type RU U Bar h l b
Type U U Bar h l b c b b
Type S Straight Bar h l
Type S2 Double Straight Bar
b b Type RA Angle Type RA1 Double Angle
Type SH Angle with leg in horizontal plane
Type RA2 Double Angle
Type RA3 Double Angle
Radiused Eazistrip
Radiused Eazistrip is available. Please contact Ancon or BRC with your requirements.
Eazistrip Water Stop

Where the potential for water ingress through the construction joint is a major concern, Eazistrip can be supplied with a Pentaflex hydrostatic seal.
w w w. a n c o n . c o . u k
Sales offices: Midlands North North East 01623 555111 01226 730330 01325 381166 North West South South East 0161 620 1001 01794 521158 020 7474 1800 South West 01752 894660 Scotland 01698 732343 Wales & West 01633 244002
11
Reinforcing Bar Couplers

Design benefits
Allows maximum bar cross-section to be used Small diameter reduces the need for concrete cover and eliminates rebar congestion Short length and slim design helps ensure the least disturbance to uniform stiffness Splice strength is independent of rebar deformation Unique tapered thread requires no lock nuts and provides a positive locking, no-slip connection Any length, shape, diameter or combination of bar sizes can be mechanically spliced
LENTON Taper Threaded Couplers

LENTON Couplers hold CARES Approval TA1C 5003 on compliance for BS 8110: Part 1: 1997 and the BNFL Specification for Couplers for use in tension under static loading conditions in sizes 1250 mm. LENTON PLUS BAR BREAK on A12, P13/P14 holds CARES approval TA1C5009 complying with BS 8110 Part 1 1997 and BNFL Specification for couplers for Type A mechanical splices.
LENTON Standard Coupler A12

LENTON A12 Couplers splice the same diameter bars where one bar can be rotated.
D A
LENTON STANDARD COUPLER A12 GROUP CBB75
Rebar size Designation Metric (mm) A B D
10 12
16
20
25
32 40
50
17* 17* 22* 27* 33 48 49 61 88 96 18 18 24 36 41
42 52 64 107 131 163 46 58 71
LENTON R11 Transition Couplers are also available.
*Use hex material (measured across the flats), others use round material.
LENTON Position Couplers P13/P14

LENTON P13 Position Couplers splice bars where the ongoing bar is restricted in its axial movement or cannot be rotated and length adjustability of the coupler is required. LENTON P14 Position Couplers splice bars which cannot be rotated such as bent bars or hooks.
P14
A B Fc Max. Fo D
LENTON POSITION COUPLERS P13/P14 GROUP CBB86
P13
A
Fc Max. Fo
Rebar size Designation Metric (mm) A B-P13 B-P14 Fc-P13 Fc-P14 Max Fo-P13 MaxFo-P14 D
10 12
16
20
25
32 40
50
22* 74 42 42 42 85 53 18
22* 77 45 42 42 85 53 18
27* 88 54 48 48 93 59 24
33 112 75 63 63 116 79 36
41 127 83 68 68 128 84 41
52 144 95 79 79 144 95 46
64 179 114 91 103 172 131 58
80 214 140 111 111 204 130 71
*Use hex material (measured across the flats), others use round material.
www.erico.com
Sales offices:
12
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Reinforcing Bar Couplers

Installation benefits
Takes approximately four turns to engage LENTON unique taper angle provides self centering and self aligning. Prevents crossthreading
E
LENTON Terminator D14

I LENTON TERMINATOR D14 is an over-sized end anchor that creates anchorage within the concrete.
LENTON TERMINATOR D14 GROUP CBB65
B AF
Rebar size Designation Metric (mm) A B D E F
10 12
16
20
25
32 40
50
33 23 18 -
41 23 19 -
52 29 24 -
64 41 36 -
80 46 41 -
110 52 46 25 80
130 64 58 30 80
160 79 72 40 80
One of the fastest systems to install - No special tools or skills required - No power required for installation - Reduces crane time Accelerates construction schedules Unique LENTON colour coded cap aids in field assembly
LENTON Form Saver

I LENTON FORM SAVER, the new economical alternative for protruding dowels, is available in fixed lengths with the Standard LENTON Tapered Thread.
LENTON FORM SAVER GROUP CBB72
Description SA10/400 SA12/600 SA16/650 SA20/800 A 400 600 650 800 D 18 18 24 36
Other available products

LENTON Bolt Coupler S13 provides a full-strength joint between a reinforcing bar and a standard metric bolt. LENTON INTERLOK uses the time-tested taper thread and an inorganic grout to provide structural integrity between load-bearing members in precast construction.
www.erico.com
13
When only the best will do . Over a period of 20 years, Kwikastrip has become established as the UKs brand leading reinforcement continuity system. Aside of the well established advantages of using continuity strip, there are essentially 3 qualities which have earned Kwikastrip its unique market position: Manufacturing versatility and emphasis on specials Approximately 85% of Kwikastrip is purpose-made. The aim is always to replicate the reinforcement detailers design in a more buildable format for the contractor . No other system can rival Kwikastrip s total exibility in this regard. Service and support from a dedicated technical team Halfens long experienced reinforcement team eat and breathe Kwikastrip every day of the week, and are very able to advise regarding the scope for any given application. You might be surprised just how inventive some of the solutions can be for seemingly impossible applications. Product Approval Kwikastrip was the very rst product ever to be awarded CARES Technical Approval status. The approval followed full-scale structural testing of the product in concrete, which concluded that the performance of joints formed using Kwikastrip were no less than that of traditional construction (i.e. with loose/unbent reinforcement). This full product approval provides critical reassurance that CARES has evaluated Kwikastrip as being t for purpose. Please ask for a copy of the CARES Technical Approval report.
KWIKASTRIP STANDARD RANGE

UNIT TYPE DIMENSIONS BAR TYPE BAR SPACINGS LAP LENGTH UNIT TYPE DIMENSIONS BAR TYPE
GROUP CEE11
BAR SPACINGS LAP LENGTH
M8.5S
T10 T12
C150/C200
410 500
M25S
T10 T12
C150/C200
410 500
M15S
T10 T12
C150/C200
410 500
M12D
T16
C150/C200
650
M17S
T10 T12
C150/C200
410 500
M19D
T16
C150/C200
650
M19S
T10 T12
C150/C200
410 500
M25D
T16
C150/C200
650
Kwikastrip standard units are 1.2m long. To order, please state quantity, unit type, bar type, and bar spacing. For example: 50 no. M8.5S T10 C150. See right hand page for ordering specials.
Sales offices:
14
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
KWIKASTRIP SPECIALS
GROUP CEE11
38 or 21
39 or 13D
37 or 11
37 or 11X
32 or 13S
77
61 or 51
38R or 21R
100
53 or 44
37C or 1 1C
20 or 00
38D or 21D
20A or 00A
32X or 13X
37B or 11B
20B or 00B
20C or 00C
37A or 11A
1st Pour
2nd Pour
Select the required bar shape from the above illustrations, then complete the scheduling form below and forward to your local BRC sales office. There is no need to consider individual casing lengths, as we will determine the optimum arrangement as a result of the customer-supplied information below .
Page
of Tel: Fax:
KWIKASTRIP SCHEDULING FORM
Contractor: Site: Drawing No(s): Schedule Ref :
Date: Detailed by:
Structural Member
Bar shape
Bar mark
No. of Mbrs.
Bars each
Bars total
Ty pe & Dia.
Bar Cntrs.
H Height
W Width
L Lap
A length
K length
A B C D E
For scheduling advice, radiused applications, waterproofing options, kickerless fixings contact your local BRC sales office
15
Tying wire
Black annealed 16 gauge wire for tying reinforcement bar and fabric. 18 gauge stainless steel grade 304 tying wire. Reelfix Tying Wire System Quality tying wire for faster and easier steel fixing with no waste. Reelfix is available as a disposable 2kg coil or as a refillable cartridge with belt.
TYING WIRE GROUP CWW01
Ref. 16G SS304

REELFIX GROUP CWW01
Description 16 Gauge Black Annealed 18 Gauge Stainless Steel Grade 304
Ref. Dispos2 16g2k Refill2
Description Disposable 2Kg Coils Reelfix 2Kg Mini Coil Cartridges 2Kg Cartridge Refills
Double loop ties and tools
LOOP TIES AND TYING TOOLS GROUP CWW20
Ref. RDLT100 RDLT125 RDLT150 RDLT200 RDLT250 RDLT300 WTT01
Description Double Loop Tie 100mm Double Loop Tie 125mm Double Loop Tie 150mm Double Loop Tie 200mm Double Loop Tie 250mm Double Loop Tie 300mm Wire Tying Tool
Continuous high chairs

For supporting fabric in ground floor slabs and spacing fabric in walls. Supplied in standard 2m lengths. Also available in heights up to 300mm. Manufactured from cold reduced wire to BS4482. Usage Approximately one 2m length per 2m2 of fabric. Special lengths Continuous high chairs are also available in special lengths to order. Minimum 1m, maximum 6m in 100mm increments.
ISO9001:2000
CONTINUOUS HIGH CHAIRS GROUP CSS52
Ref. CHL50 CHL60 CHL75 CHL80 CHL90 CHL105 CHL120 CHL135 CHL150 CHL165 CHL180 CHL200 CHL230 CHL250 CHL280
Height mm 50 60 75 80 90 105 120 135 150 165 180 200 230 250 280
Pack Qty. 25 x 2m 25 x 2m 25 x 2m 25 x 2m 25 x 2m 25 x 2m 25 x 2m 25 x 2m 25 x 2m 25 x 2m 25 x 2m 20 x 2m
Circular wire spacers

Simple method of supporting fabric in ground floor conditions. Supplied flat in 3.0m lengths to be formed into a circle approximately 900mm diameter on site. Manufactured from cold reduced wire to BS4482. Usage Approximately one circular spacer per 2m2 of fabric.
CIRCULAR WIRE SPACERS GROUP CSS54
Ref. CS050 CS060 CS075 CS080 CS090 CS105 CS120 CS135 CS150 CS165 CS180 CS200
Height mm 50 60 75 80 90 105 120 135 150 165 180 200
Pack Qty. 25 25 25 25 25 25 25 25 25 25 25 25
ISO9001:2000
Pre-stressed wire and stabilised strand

Pre-stressed wire and stabilised strand are also available. Please contact your local BRC sales office for details. Sales offices:
16
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Single cover concrete spacers

For the vertical and horizontal spacing of reinforcing bar providing maximum stability under normal loading conditions. Usage 4 spacers per m2.
SINGLE COVER CONCRETE SPACERS GROUP CSS70
Ref. C20 C25 C30 C35 C40 C50 C60 C75
Cover mm 20 25 30 35 40 50 60 75
Pack Qty. 1000 500 250 250 250 200 100 100
Double cover concrete spacers

A more flexible spacer for the vertical and horizontal spacing of reinforcement bar providing maximum stability under normal loading conditions. Usage 4 spacers per m2.
DOUBLE COVER CONCRETE SPACERS GROUP CSS70
Ref. C25/30 C30/40 C40/50 C60/75
Cover mm 25 or 30 30 or 40 40 or 50 60 or 75
Pack Qty. 500 250 200 50
Triple cover concrete spacer

For use in vertical situations providing maximum stability under normal loading conditions and minimising the area of spacer at the form face. Usage 4 spacers per m2.
TRIPLE COVER CONCRETE SPACER GROUP CSS70
Ref. C35/40/50
Cover mm 35, 40 or 50
Pack Qty. 200
Concrete fabric spacer

Used for the spacing of fabric at the bottom of slabs, they have a circular base for maximum stability under normal loading conditions. Usage 4 spacers per m2.
CONCRETE FABRIC SPACER GROUP CSS72
Ref. CFS40/50
Cover mm 40 or 50
Pack Qty. 100
Concrete line spacers

A heavy duty concrete spacer simply laid on the sub-base or formwork for the fast placement of reinforcement. Usage 2 linear metres per m2. Available in 1m lengths.
CONCRETE LINE SPACERS GROUP CSS71
Ref. CSB25X1 CSB30X1 CSB40X1 CSB50X1 CSB60X1 CSB75X1
Cover mm 25 30 40 50 60 75
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
17
Grade plate spacers

A lightweight option for the spacing of fabric at the bottom of slabs. Their wide base gives extra stability particularly on soft blinding. Usage 4 spacers per m2.
GRADE PLATE SPACERS GROUP CSS15
Ref. GP25/30 GP40/50 GP65/75 GP90/100
Cover mm 25 or 30 40 or 50 65 or 75 90 or 100
Pack Qty. 250 250 200 100
Plastic line spacers

Use for bottom spacing of fabric or bar with light loads against formwork and particularly metal decking. Available in 2 metre lengths. Usage Maximum 50d spacings.
PLASTIC LINE SPACERS GROUP CSS06
Ref. AHS20 AHS25 AHS30 AHS35 AHS40 AHS50
Cover mm 20 25 30 35 40 50
Pack Qty. 100m 100m 100m 50m 50m 50m
Wheel spacers
For spacing vertical reinforcement in columns etc. The wheels easily clip onto the reinforcement bar and minimise the area of spacer at the form face. Usage Dependent on bar diameter.
WHEEL SPACERS GROUP CSS13
Ref. UW20 UW25 UW30 UW40 UW50
Cover mm 20 25 30 40 50
Bar Dia. mm 8-12 8-12 8-12 8-20 12-20
Pack Qty. 1000 500 500 250 250
Safety end caps

Plastic protection caps for exposed reinforcing bar.
SAFETY END CAPS GROUP CVV99
Ref. RS616 RS1632 RS4050
To Suit Bar Dia. 6-16 16-32 40-50
Pack Qty. 250 250 100
Sales offices:
18
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Void form holding down bolt sleeve

The new standard in foundation bolt cones Plastic conical void former that eliminates the need for removal and disposal of cardboard or polystyrene type cones. Fully enclosed base removes the need for bolt adjustment. Void form is supplied at 380mm long and can be easily cut on site to suit shorter bolts.
* Centralising cap not shown for clarity.
VOID FORM HOLDING DOWN BOLT SLEEVE GROUP CVV99
Ref. HDB100x100x375mm
Length 380mm max
Base 115 x 115mm
Waxed cardboard bolt boxes

A waxed conical cardboard bolt box, used to form voids and accommodate movement of holding down bolts.
WAXED CARDBOARD BOLT BOXES GROUP CVV99
Ref. CBW225 CBW300 CBW375 CBW450 CBW525 CBW600
Length mm 225 300 375 450 525 600
Dia. Top/Bot 70/20 90/20 100/25 115/30 115/30 130/30
Polystyrene bolt boxes

Core diameter for bolt is approximately 25mm. Other sizes made to order. Use proprietary dissolving agent for removal of bolt boxes.
POLYSTYRENE BOLT BOXES GROUP CVV01
Ref. CB225 CB300 CB375 CB450 CB525 CB600 CB750
Length mm 225 300 375 450 525 600 750
Dia. Top/Bot 75/40 75/40 75/40 75/40 75/40 75/40 75/40
Holding down bolts

Holding down bolt assemblies comprising bolt, washer plate, nut and washer. Range from 16 - 30mm in lengths 200 - 600mm depending on grade. Grade 4.6 or 8.8 available.
HOLDING DOWN BOLTS GROUP CVV99
Please contact your local BRC sales office for details
General purpose grout

A general purpose, non-shrink grout as a dry powder requiring only the addition of water to produce a free-flowing or trowellable mortar, which will maintain its original volume after curing. Yield 12.5 litres per 25kg bag.
GENERAL PURPOSE GROUT GROUP CCCB2
Ref. GPG25
Weight/Pack 25kg
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
19
Slab products
DYNA Quell Waterstop

DYNA Quell is a high swelling material used for effective sealing of joints in concrete construction. It is produced from a combination of Bentonite and Butyl rubber. This material will expand on contact with water to seal the gaps and pores in a concrete joint. After expanding the material retains its elasticity so that the seal will not be affected by any subsequent movement of the structure.
DYNA QUELL WATERSTOP GROUP CII52
Ref. DBWATERSTOP20/25 FIXINGSTRIP1 FIXINGNAIL
Dim. mm 20x25 1m
Roll Size Pack size m 5 8 100
Polythene and joint tape

The products are available in thicknesses of I 250 microns (1000 Gauge). I 300 microns (1200 Gauge). I 500 microns (2000 Gauge). 300 micron polythene is also available as a centrefold. Standard polythene is folded twice and supplied as a 1m wide roll. Centrefold polythene is folded once and supplied as a 2m wide roll.
BBA GRADE POLYTHENE GROUP CGG03
Ref. DP1000 DP1200
Thickness m 250 300
Roll Width m 4 4
Roll Length m 25 25
PIFA GRADE POLYTHENE GROUP CGG03
Ref.
Thickness m PDP1000 250 PDP1200 300 PDP2000 500
Roll Width m 4 4 4
Roll Length m 25 25 12.5
TEMPORARY PROTECTIVE SHEETING GROUP CGG03
Ref. TPSM (medium duty) TPSH (heavy duty)
Roll Width m 4 4
Roll Length m 50 25
JOINTING TAPE GROUP CCCB9
Ref. SST (single sided) DST (double sided)
Roll Size 50mm x 66m 50mm x 66m
Pack Qty. 10 10
Sales offices:
20
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Slab products
Gas protection membranes

BRC offer a range of gas barriers to provide protection against methane or radon gas. Fully certificated, the range briefly comprises: Radon barrier Manufactured from LDPE, reinforced with a strong multifilament yarn. Typical weight is 370g/m2. Methane barrier Manufactured from LDPE, reinforced with a strong multifilament yarn and aluminium foil. Typical weight is 420g/m2. Accessories Also available is a full range of ducts, vents and sumps. Service Non standard panels can be produced to suit an individual layout. This minimises cutting and waste, as well as simplifying the laying process and ensuring that a full seal is provided. We can provide design assistance and layout drawings. A supply and fix service can also be made available.
Premseal
Waterproof membranes Premseal waterproof membranes combine the very best in modern polymer laminates with traditional bitumen and polymer adhesives to form extremely tough, hard-wearing waterproof membranes for even the most stringent applications. All Premseal membranes are designed to have excellent situation-tolerant installation properties. Specialist membranes are available to give protection against landfill gases such as methane, naturally occurring radioactive radon and solar radiation.
Pipe through slab
Internal corner Premseal 'O' series protection board secured with Premstik and boards joined with Premseal reinforcing tape Premseal self-adhesive waterproof membrane
Premb board 'O' Series protect tion board
Premseal self-adhesive membrane star cut around pipe
Pre-formed or bitumen mastic fillet
Premseal fillet
Concrete parapet Premkol 701 or other approved sealant Premseal solar shield Premseal self-adhesive membrane reinforced at corner Insulation screed shingle or paving
External corner Premboard 'O' Series protection board secured with Premstik and boards jointed with Premseal reinforcing tape
Premseal self-adhesive waterproof m membrane
Premseal fillet
Premboard 'O' series protection board
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
21
Slab products
Dowel bars
Sawn end plain round A full range of sawn end, plain round dowel bars for use in movement joints. High yield ribbed tie-bars A full range of high yield ribbed tie-bars for use in tied joints where movement is to be restricted. Stainless steel dowels Supplied to order.
DOWEL BARS GROUP CGG07
Ref. R10 R12 R16 R20 R25

TIE BARS GROUP CGG07
Dia. mm 10 12 16 20 25
Ref. T10 T12 T16 T20 T25
Dia. mm 10 12 16 20 25
Dowel bar sleeves

Plastic debonding sleeves for use in dowelled movement joints.
DOWEL BAR SLEEVES - GROUP CMM01
DOWEL BAR SLEEVES - continued
Ref.
Bar Dia. mm DB12/450 12 DB16/200 16 DB16/450 16
Sleeve Length mm 450 200 450
Pack Qty. 100 100 100
Ref.
Bar Dia. mm DB20/300 20 DB25/300 25 DB25/375 25
Sleeve Length mm 300 300 375
Pack Qty. 100 100 100
Dowel bar debonder

A bituminous based compound to allow dowel bars to completely break bond with concrete. Complies with clause 1011 DOT specification for highways work. Coverage 1.8 - 3.6m2 per litre.
DOWEL BAR DEBONDER GROUP CCCB8
Ref. DB005 DB025
Pack Size 5L 25L
Expansion dowel caps

Rigid PVC caps with compressible filler (25mm) to allow for expansion.
EXPANSION DOWEL CAPS GROUP CGG05
Ref. D12 D16 D20 D25 D32 D40
Bar Dia. mm 12 16 20 25 32 40
Cap Length mm 100 100 100 100 100 100
Pack Qty. 100 100 100 100 100 100
Dowel bar cradles

Contraction joint cradles Height is to the underside of the dowel. Supplied by the half cage. Sleeves For use with contraction joint cradles. Usage: 5 sleeves per linear metre of joint. Expansion joint cradles Height is to the underside of the dowel. Supplied by the half cage.
CONTRACTION JOINT CRADLES GROUP CSS60
Ref.
Height mm CJC75 75 CJC95 95 CJC125 125 RCPS7 Sleeves
Slab Depth Range mm 150-180 190-230 240-300 Pack qty. 100
Length mm 2000 2000 2000
EXPANSION JOINT CRADLES GROUP CSS60
Ref.
Height mm EJC65 65 EJC90 90 EJC115 115
Slab Depth Range mm 150-180 190-230 240-300
Length mm 2000 2000 2000
Sales offices:
22
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Slab products
Crack inducers
Top crack inducer (two-part) Rigid PVC extrusions for use in induced joints. Total depth of crack inducer to be 1/4 to 1/3 of slab depth. Bottom crack inducer Rigid PVC extrusions for use in induced joints. Total depth of crack inducer to be 1/4 to 1/3 of slab depth.
TOP CRACK INDUCER GROUP CMM07
Ref.
BF10/50/25 BF10/75/25
Top Section Width/Depth mm 10/25 10/25
Bottom Section Section Depth Depth mm mm 25 50 50 75
BOTTOM CRACK INDUCER GROUP CMM05
Ref. CY40 CY50 CY75
Section Y Y Y
Depth mm 40 50 75
Miothene joint filler

Closed cell polyethylene foam strip 35kg/m3 Perforated for easy removal of top section. Standard range supplied in 2m strips. Also available in sheets or cut to size in 10mm, 12mm, 15mm, 20mm and 25mm thicknesses.
MIOTHENE JOINT FILLER GROUP CMM20
Ref.
Width mm 100 140 150 150 175 175 200 200
Thickness mm 10 10 12 20 12 20 12 20
S100/10/10 S140/10/10 S150/12/12 S150/20/20 S175/12/12 S175/20/20 S200/12/12 S200/20/20
Perforated mm from edge 10 10 12 20 12 20 12 20
Frost/curing blankets
Closed cell polyethylene blanket Effective as frost protection in winter and to aid curing during summer. Air bubble blankets and hessian blankets also available.
FROST/CURING BLANKET GROUP CMM10
Ref. FB75X2/10
Description 75 x 2m blanket, 10mm thick
Concrete screed rails

Concrete screed rail for accurate floor levels without the need to strike traditional road forms.
CONCRETE SCREED RAILS GROUP CPP11
Ref. BR50 BR100 BR125 BR150
Height mm 50 100 125 150
Length m Rails Per Bundle 3 104 3 48 3 33 3 27
Screed chairs
Plastic screed chairs are fully adjustable and ideal for lightweight applications. Use with a 50mm diameter tube. Shaft is supplied in 2m lengths to be cut on site. Metal screed chairs are fully adjustable and supplied in two parts. Height is adjusted using thread.
PLASTIC SCREED CHAIRS GROUP CGG01
Ref. SCS SCC SCB T22
Description Saddle Collar Base 22mm Tubing for Shaft
METAL SCREED CHAIRS GROUP CGG01
Ref. MSC115-150 MSC145-205 MSC195-310 MSC285-405
Height Range mm 115-150 145-205 195-310 285-405
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
23
Slab products
PermaSteel
PermaSteel is a low cost leavein-place, light duty application screed rail that takes the concept of leave-in-place formwork onto the next stage. Using Permabans experience in constructing floors and formwork design, other all steel formwork systems were examined in depth and in every case design or installation faults were evident in some way. Permaban addressed these shortcomings with the development of PermaSteel. In addition PermaSteel provides some arris support, accommodates dowel bars, acts as a crack inducer and can be supplied with a sealant void former. Permasteel rails are easy to handle and transport as the weight is low and they are delivered in bundles that can be stacked.
Type 1
PERMASTEEL ALL STEEL SCREED RAILS GROUP CPP99
Optional Sealant Void Former
Ref. Height mm Length m Type 1 MSR115mmx3m 115 3 MSR155mmx3m 155 3 PERMASTEEL/LFEET 115/155 extra feet *Type 1 comes with 3 feet. If a Bunyan striker is used then employ at least 4 feet per 115mm rail and 5 for the 155mm. Type 2 MSR40mmx3m 40 3 MSR70mmx3m 70 3 SSVF Void former 3 For heavy duty applications, please use the AlphaJoint range of products.
Type 2
BetaJoint
An easily installed, adjustable leave-in-place formwork system for light to medium duty applications with bolt-on leave-in-place feet, or use Permaban AlphaFix removable fixing system to provide Micrometer adjustment for superflat floors. BetaStrip 2mm wide or BetaTop 12mm wide screed rail for tied joints or BetaJoint for contraction joints. Available for 100mm to 225mm deep slabs and easily adjustable to level. Load transfer by 6mm Diamond Dowels, round or square dowel, or tie bar. Special Beta-products available for slab depths up to 400mm deep.
BETAJOINT GROUP CPP99
Ref. B-JT100 B-JT125 B-JT150 B-JT175 B-JT200

BETASTRIP GROUP CPP99
Height mm 100 125 150 175 200
Length m 3 3 3 3 3
BetaJoint
Ref. BDP-SP/SD-100 BDP-SP/SD-125 BDP-SP/SD-150 BDP-SP/SD-175 BDP-SP/SD-200

BETATOP GROUP CPP99
Height mm 100 125 150 175 200
Length m 3 3 3 3 3
Ref. BDP-TP/SD-100 BDP-TP/SD-125 BDP-TP/SD-150 BDP-TP/SD-175 BDP-TP/SD-200
Height mm 100 125 150 175 200
Length m 3 3 3 3 3
BetaStrip
BetaTop
Sales offices:
24
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Slab products
AlphaJoint
Permaban AlphaJoint gives concrete floors enhanced performance from free contraction joints. It incorporates patented systems of load transfer across joints, which enhance the loading value of the concrete floor. AlphaJoint satisfies the requirements in Concrete Society TR34 and BS82042: 1999 for load transfer and arris protection in heavy duty concrete floor slabs.
ALPHAJOINT GROUP CPP21
w/Alpha Dowel
w/Diamond Dowel
Ref. DD6-120/140/150/175 DD6-225 AD10-120/140/150/175 AD10-7-225 AD10-7-250/275
Height mm 150-200 201-250 150-200 201-250 251-300
Length m 3 3 3 3 3
w/AlphaFeet w/AlphaFix
Dowel systems
Permaban Dowel Systems provide superior load transfer across the joint compared to traditional round dowels. These innovations spread stress over the full width of the dowel. Permaban dowels allow sub base preparation right up to the slab edge. Permaban dowel systems eliminate vertical joint movement while allowing two-way lateral joint movement between adjacent bays of the concrete slab.
Tri-Plate Diamond Dowel Alpha Dowel DOWEL SYSTEMS GROUP CGG07
AD10-CS-NT DD6-CS-NT TR10 or 6

PermaSleeve PERMASLEEVE GROUP CGG07
Alpha Dowel Diamond Dowel Tri-Plate
Square dowel bar

GROUP CMM01
Sleeve for square dowel bar
Manhole surrounds
MANHOLE SURROUNDS GROUP CPP40
This new product allows virtually any manhole to be isolated and finished with far greater ease than before. It reduces the need to finish the awkward detailing around these objects during the middle of a large flood pour of concrete. Each surround has jacking studs to give accurate adjustment to height and level as well as effective load transfer features using Permaban Diamond Dowels.
Ref. MHS-150-1000 MHS-150-1500 MHS-150-2000 MHS-150-3000 MHS-175-1000 MHS-175-1500 MHS-175-2000 MHS-175-3000 MHS-200-1000 MHS-200-1500 MHS-200-2000 MHS-200-3000
Height mm 150 150 150 150 175 175 175 175 200 200 200 200
Length m 1x1 1.5 x 1.5 2x2 1.5 x 3 1x1 1.5 x 1.5 2x2 1.5 x 3 1x1 1.5 x 1.5 2x2 1.5 x 3
Other products
s Composite flooring systems s Pumpable flooring systems s Terrazzo styling techniques s Dry-Shake floor toppings s PermaSeal floor sealant systems s PermaFlex joint sealant systems
www.permaban.com
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
25
Slab products
Release
Mould release oil A high quality mould oil for general site and precast yard use that achieves a top quality concrete finish in most situations. BCA category 2. UKWFBS listed. Spray or brush applied. Coverage: 20-30m2 per litre. Chemical release agent Specially blended reactive oils which give a high quality finish with most formwork types. BCA category 5. UKWFBS listed. Spray applied. Coverage: 30-50m2 per litre.
MOULD RELEASE OIL GROUP CCCB1
Ref. MRO005 MRO025 MRO205
Size 5L 25L 210L
CHEMICAL RELEASE AGENT GROUP CCCB1
Ref. CRA25 CRA205
Size 25L 210L
Curing
Curing compound silicate based An aqueous solution of metalic silicates as a general curing aid. Also available tinted. UKWFBS listed. Spray applied. Coverage: 5.5-6m2 per litre. Curing compound resin based Formulated with inert hydrocarbon resins to give excellent film and moisture retention. 90% efficiency rating. UKWFBS listed. Spray applied. Coverage: 5.5-6m2 per litre. Curing and sealing compound A clear acrylic polymer resin solution for application to surfaces of freshly laid concrete to form a highly effective curing membrane and an in-depth sealer. 75% efficiency rating Spray applied. Coverage: 6m2 per litre.
CURING & SEALING COMPOUNDS GROUP CCCB5
Ref. SCA025 SCA205 CM025 CM205 CSC025 CSC205
Type Silicate Based Silicate Based Resin Based 90% Resin Based 90% Curing & Sealing Curing & Sealing
Size 25L 210L 25L 210L 25L 210L
Water-based curing products Water-based curing products are also available. Please contact your local BRC sales office for details.
Surface hardening and dustproofing

A surface hardener for new and old concrete floors to provide dustproofing and increase durability. Brush applied. Coverage: 6m2 per litre (dependent on floor porosity).
SURFACE HARDENING GROUP CCCB5
Ref. SH025 SH200
Size 25L 210L
Surface retarders
To provide an exposed aggregate finish for concrete or a key for subsequent pours. Mould face For application to mould face prior to placing of concrete. Brush applied. Coverage: 15-16m2 per litre. Top face For treatment to the top face of freshly cast concrete. Spray applied. Coverage: 5m2 per litre.
SURFACE RETARDERS GROUP CCCA4
Ref. AMFS005 AMFS025 ATFS005 ATFS025 ATFS205
Type Size Mould Face Retarder 5L Mould Face Retarder 25L Top Face Retarder 5L Top Face Retarder 25L Top Face Retarder 210L
Sprayers
Plastic and metal sprayer units
SPRAYERS GROUP CCCN7
Ref. PLT1 PLT125 LMS07 LMS11
Type Plastic Plastic Metal Metal
Size 7L 12.5L 9L 11L
Sales offices:
26
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Formwork
Threaded formwork tie bar system

Tie rod For securing formwork. Coarse self-cleaning threaded bar with a core diameter of 15mm and an overall diameter of 17mm. Available in 6m, 3m, 2m, 1.5m and 1.2m lengths. The ultimate fail load is 180KN. Also available in 20mm. Wing nut To suit a 15mm tie rod. Also available for 20mm tie rod. Waler plates, hexagon nuts, connectors, water barriers, rock anchors All items are compatible with the 15mm tie rod system. Also available for 20mm tie rod.
THREADED TIE BAR SYSTEM GROUP CTT08
Ref. TTR TTR20 TWN TWN20 TPH TPH20
Description 15mm Rod (6m Length) 20mm Rod (6m Length) 15mm Wing Nut 20mm Wing Nut Waler plate 120 x 120 x 12mm Waler plate 120 x 120 x 12mm
PLASTIC SLEEVE GROUP CTT01
Plastic sleeve To allow the tie rod to be retrieved. To suit a 15mm tie rod system the sleeve has a 22mm internal diameter. 26mm also available to suit 20mm tie rod. Plastic cones A 22mm diameter plastic cone to fit inside a 22mm plastic sleeve. 26mm also available to suit 20mm tie rod.
Ref. T22 T26
Internal Dia. mm 22 26
PLASTIC CONES GROUP CTT02
Ref. K22 K26
Tube I.D. mm 22 26
Rubber stopper For sealing sleeve after a concrete pour. 26mm diameters also available to suit 20mm tie rod.
RUBBER STOPPER GROUP CTT08
Ref. F22 F26
Tube I.D. mm 22 26
Formwork accessories
Chamfer corner profile A triangular plastic strip in 2.5m lengths. To form a chamfer in concrete columns. Available with or without a nailing flange. H
CHAMFER CORNER PROFILE GROUP CTT08
Ref. CF10 CF15 CF20 CF25 CFF10 CFF15 CFF20 CFF25
Type Plain Plain Plain Plain with Flange with Flange with Flange with Flange
H mm 10 15 20 25 10 15 20 25
Formwork joint tape A multi-purpose PVC adhesive tape in roll size 50mm x 33m. To assist in joint applications.
FORMWORK TAPE GROUP CCCN1
Ref. FWT
Roll size 50mm x 33m
Grout check foam tape Closed cell tape for sealing formwork in roll sizes 12mm x 6mm and 24mm x 12mm. Helps to reduce grout loss.
GROUT CHECK FOAM TAPE GROUP CCCB9
Ref. SF1210 SF2405
Roll size 12mm x 6mm x 10m 24mm x 12mm x 5m
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
27
Formwork
Column corner guards

Materials: Mild steel plate - hot dip galvanised, powder or nylon coated (colour to order). Stainless steel - standard mill finish or satin/mirror polished. Sizes: Fixings: Standard 50 x 50 x 3mm x 1200mm long. Formed to various radii, lengths as required. Cast-in applications - anchors and threaded fixing points. Surface fix applications - countersunk holes.
COLUMN CORNER GUARDS GROUP CTT04
Please contact your local BRC sales office for details
Rapidobat
Round columns made easy!
Rapidobat is a purpose made spirally wound rigid paper tube of extremely high quality. The tube is internally lined with a smooth faced plastic release sheet which provides the ultimate in concrete surface finish and appearance. Rapidobat is the fast and economical solution to the problems of forming round columns which is complicated with timber formwork and expensive with GRP or steel formwork. Rapidobat incorporates a unique and patented tear off strip which means that stripping is achieved in a matter of seconds - without any risk of damage to the concrete face. Importantly, after column inspection, the stripped Rapidobat tube then provides physical protection from potential site damage to the attractive newly cast column.
Rapidobat
RAPIDOBAT GROUP CTT99
Tube Internal Diameter (mm) 150 200 240 250 300 350 360 400 435 450 500 560 600 650 700 750 800 900 1000
Tube Wall Thickness (mm) 4.5 4.5 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.5 7.0 7.0 8.0 8.5 9.5 10.0 10.5 12.0 13.5
Maximum Pour Height (m)* 12.30 10.25 10.25 10.25 10.25 8.79 8.79 7.69 7.00 6.50 7.30 6.80 6.15 6.00 7.03 7.03 7.69 7.70 7.65
* The maximum recommended pour height of concrete in consideration of the internal pour pressure related to tube diameter and wall thickness.
Sales offices:
28
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Formwork
Shuttering Strips
I Use to form openings in concrete slabs. I Shuttering strips are perforated
SHUTTERING STRIPS GROUP CPP50
crosswise every 50mm.

I The surface profile ensures proper bond
to the concrete.
Type SF15 SF17 SF18 SF22 SF25 SF27 SF30
Height 150 mm 175 mm 180 mm 225 mm 250 mm 275 mm 300 mm
Roll size 10 m 10 m 10 m 10 m 10 m 10 m 10 m
Locking Steel Kickers

I Eliminates the need for costly set-up of
kicker shutttering.
I Ready to use. I Fast and easy adjustment. I Long body giving solid fixing. I No tools required.
W E D G E L O C K
LOCKING STEEL KICKERS GROUP CTT09
Type Wall width mm LSK150 150 LSK175 175 LSK200 200 LSK225 225 LSK250 250 Other sizes are available on request
Speed Edge Formwork

I Leave in place formwork for ground
supported slabs or bases.

I Self-supporting. I Fast installation. I Standard 2.25m long units.
SPEED EDGE FORMWORK GROUP CPP60
Type R150 R175 R200 R250 R300
B (mm) 120 120 120 155 180
H (mm) 150 175 200 250 300
Length (m) 2.25 m 2.25 m 2.25 m 2.25 m 2.25 m
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
29
Weldmesh and gabions
Heavy Weldmesh range

Galvanised after manufacture and self colour finish
4.8mm 4.0mm 3.1mm 2.5mm
Light Weldmesh range

Galvanised after manufacture
0.7mm
1 /4
1.0mm
1 /2 1 /2
1.6mm
1 /2 1 /2
2x2 3x3 3x6 75mm x 25mm x 4.80/3.00mm
1x1 2x1 2x2 3 x 1/2 3x3
1x1 11/2 x 11/2 2x1 2x2 3 x 1/2 3x1 3x3 4x4
1x1 11/2 x 11/2 2x1 2x2 3 x 1/2 3x1
x 1/4
x 1/2** x 1** 1 x 1**
x 1/2 x 1* 3/4 x 3/4** 1 x 1** 2x2
* Also available pre-galvanised ** Also available self colour
Stainless steel Weldmesh 304 spec.

3.0mm 2.5mm 1.6mm
1 /2
Pre-galvanised Weldmesh
2.5mm 3.0mm
3 x 1/2 1x1 2x2
3 x 1/2 1x1 2x2
x 1/2 1x1
2x2 50mm x 50mm
2x2 50mm x 50mm
Weldmesh size range weight guide.

To convert the panel weight into Kg/m multiply the Kg/ft value by 10.76
SPECIFICATION APPROX. WEIGHT KG/FT2 SELF COLOUR GALVANISED SPECIFICATION APPROX. WEIGHT KG/FT2 SELF COLOUR GALVANISED
2 2
Weldmesh gauges guide

APPROX. SIZE mm SELF COLOUR GALVANISED
2 x 2 x 4.80mm 3 x 3 x 4.80mm 3 x 6 x 4.80mm 75mm x 25mm x 4.80mm/3.10mm 1 x 1 x 4.00mm 2 x 1 x 4.00mm 2 x 2 x 4.00mm 3 x 1/2 x 4.00mm 3 x 3 x 4.00mm 1 x 1 x 3.10mm 11/2 x 11/2 x 3.10mm
0.51 0.34 0.26 0.38 0.71 0.52 0.35 0.80 0.23 0.41 0.28
0.52 0.35 0.27 0.40 0.74 0.54 0.36 0.83 0.24 0.43 0.29
2 x 1 x 3.10mm 2 x 2 x 3.10mm 3 x 1/2 x 3.10mm 3 x 1 x 3.10mm 3 x 3 x 3.10mm 4 x 4 x 3.10mm 1 x 1 x 2.50mm 11/2 x 11/2 x 2.50mm 2 x 1 x 2.50mm 2 x 2 x 2.50mm 3 x 1/2 x 2.50mm 3 x 1 x 2.50mm
0.31 0.21 0.48 0.28 0.14 0.11 0.27 0.18 0.20 0.14 0.32 0.18
0.33 0.22 0.50 0.29 0.15 0.12 0.29 0.19 0.22 0.15 0.34 0.19
22g 19g 16g 14g 12g 10g 8g 6g
0.66 0.91 1.52 1.93 2.44 3.00 3.88 4.69
0.70 1.00 1.60 2.00 2.50 3.10 4.00 4.80
Weldmesh flat
Self colour finish
FLAT ON EDGE EDGE ON EDGE SPECIFICATION MESH x WIRE SIZES PANEL WEIGHT (Kg)
Quality standards
Gauge sizes
Dimensions shown are for galvanised wire. Weldmesh self-colour specifications will vary between 0.04mm and 0.12mm below the galvanised wire dimension as shown in the Weldmesh Gauges Guide.
Panel size: 1200mm x 2400mm Finish: Self Colour (bright wire)
50 x 50 x 4/2mm 25 x 25 x 4/2mm 50 x 50 x 5/2.50mm 25 x 25 x 5/2.50mm 50 x 50 x 6/3mm 25 x 25 x 6/3mm
7.24 14.25 11.31 22.27 16.28 32.07
Galvanised Weldmesh
Through our unique smooth inline galvanised process, Weldmesh is hot dip galvanised to the highest standards and conforms to BS EN 10244-2 Class A. Should a thicker coat be necessary, i.e. BS EN ISO 1461 (replaces BS729), this can be obtained on request. Pre-galvanised Weldmesh (mesh made from galvanised wire) can also be produced on request.
Sales offices:
30
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
Weldmesh and gabions
Weldmesh Concertainer Gabions and Mattresses

The use of gabions as an effective solution to combat erosion and to stabilise and strengthen embankments has been in evidence for several centuries. Rivers, coasts roads and railways can all be subject to continuous or fluctuating erosion, demanding planned defences that counteract the forces involved. Concertainer gabions are used in many modern civil engineering schemes to provide economic and effective solutions. In recent years Betafence Ltd have concentrated on quality of materials, manufacture and installation techniques resulting in extensive use for civil engineering and architectural applications where quality and aesthetics are paramount. All Concertainer gabions and mattresses are BBA certified for Roads & Bridges and General Building Regulations.
GABIONS GROUP LRH75
Corrosion Protection Zincalu Super (95% Zn / 5% Al) Mesh Size 76.2mm x 76.2mm Ref: Gabion Dimensions Wire diameter 75300GC1 1m x 1m x 0.5m 3mm 75300GC2 1m x 1m x 1m 3mm 75300GC17 1.5m x 1m x 0.5m 3mm 75300GC9 1.5m x 1m x 1m 3mm 75300GC3 2m x 1m x 0.5m 3mm 75300GC4 2m x 1m x 1m 3mm 75300GC5 3m x 1m x 0.5m 3mm 75300GC6 3m x 1m x 1m 3mm 75300GC7 4m x 1m x 0.5m 3mm 75300GC8 4m x 1m x 1m 3mm Also available in 4.5mm wire and PVC coated on galvanised wire
MATTRESSES GROUP LRH75
Corrosion Protection Zincalu Super (95% Zn / 5% Al) Mesh Size 76.2mm x 76.2mm Ref: Mattress Dimensions Wire diameter 75300MC1 3m x 2m x 0.150m 3mm 75300MC2 3m x 2m x 0.225m 3mm 75300MC7 3m x 2m x 0.300m 3mm 75300MC4 6m x 2m x 0.150m 3mm 75300MC5 6m x 2m x 0.225m 3mm 75300MC3 6m x 2m x 0.300m 3mm Also available in 4.5mm wire and PVC coated on galvanised wire
Sales offices:
01623 555111 01226 730330 01325 381166
0161 620 1001 01794 521158 020 7474 1800
31
Other BRC companies
ISO9001:2000
34
BRC A division of BRC Limited CONDITIONS OF SUPPLY 1. Interpretation 1.1 In these Conditions: "Buyer" means the party which accepts a quotation given to it by the Seller for the sale of the Goods. "Conditions" means the standard terms and conditions of supply set out in this document and (unless the context otherwise requires) includes any special terms and conditions agreed in Writing between the Buyer and the Seller. "Contract" means the contract for the sale and purchase of the Goods. "Goods" means the goods set out in the Quotation (including any instalment of the goods or any part of them) which the Seller is to supply in accordance with these Conditions. "Order Confirmation" means confirmation given by the Seller to the Buyer that the Seller agrees to supply an order of the Buyer on these Conditions. "Price" means the price of the Goods. "Quotation" means a quotation given by the Seller to the Buyer on the basis of these Conditions. "Seller" means BRC Limited of Edstone Hall, Wootton Wawen, Solihull, B95 6DD. Registered in England No. 3721267. "Specification" includes any plans, drawing, data, formulae, instructions or other information relating to the Goods. "Writing" includes facsimile transmission and comparable means of communication. 1.2 Any reference in the Conditions to a statute or a provision of a statute shall be construed as a reference to that statute or provision as amended, re-enacted or extended at the relevant time. 1.2 The headings in these Conditions are for convenience only and shall not affect their interpretation. 2. Basis of Purchase 2.1 The Quotation shall constitute an invitation to treat by the Seller. 2.2 An order submitted by the Buyer shall constitute an offer by the Buyer to purchase the Goods subject to these Conditions. 2.3 No order shall be accepted or deemed to be accepted by the Seller unless and until confirmed in Writing by the Sellers authorised representative by way of Order Confirmation. 2.4 All quotations made by the Seller in respect of material ex-stock are subject to the material being in stock at the time the Buyers order is received and the Seller accepts no liability should such material be sold before the Buyers order is received. 2.5 The Seller shall supply and the Buyer shall acquire the Goods in accordance with the Sellers Order Confirmation subject to these Conditions, which shall govern the Contract to the exclusion of any other terms and conditions subject to which any such quotation is accepted or purported to be accepted, or any such order is made or purported to be made, by the Buyer. 2.6 No variation to these Conditions shall be binding unless agreed in Writing between the authorised representatives of the Buyer and the Seller. 2.7 The Sellers employees or agents are not authorised to make any representations concerning the Goods unless confirmed by the Seller in Writing. In entering into the Contract the Buyer acknowledges and agrees that it does not rely on any such representations which are not so confirmed. 2.8 Any advice or recommendation given by the Seller or its employees or agents to the Buyer or its employees or agents as to the storage, application or use of the Goods which is not confirmed in Writing by the Seller is followed or acted upon entirely at the Buyers own risk, and accordingly the Seller shall not be liable for any such advice or recommendation which is not so confirmed. 2.9 Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer, Order Confirmation, invoice or other documentation or information issued by the Seller shall be subject to correction without any liability on the part of the Seller. 2.10 The Buyer shall be responsible for the efficacy or otherwise of any information, advice or instructions regarding the Goods given by the Buyer or attached to the Goods and the Buyer shall be liable for and shall indemnify the Seller against all losses, damages, costs and expenses incurred by the Seller or awarded against the Seller in connection with or arising from such information, advice or instructions. 2.11 Where the Contact provides for testing and inspection of the goods before delivery, the Buyer may carry out testing and/or inspection of the Goods at its own expense and at the Sellers producing works within 7 days of notification by the Seller to the Buyer that the Goods are ready for delivery. The Buyer shall pay for all test pieces which comply with the Specification. 2.12 At the expiry of 7 days from the notification referred to in 2.11, the Seller shall be entitled to deliver the Goods to the Buyer as provided in these Conditions whether or not the Buyer has carried out any testing or inspection. 3. Orders and Specifications 3.1 No order submitted by the Buyer shall be deemed to be accepted by the Seller unless and until confirmed in Writing by the Sellers authorised representative by way of Order Confirmation. 3.2 The Buyer shall be responsible to the Seller for ensuring the accuracy of the terms of any order (including any applicable specification) submitted by the Buyer, and for giving the Seller any necessary information relating to the Goods within a sufficient time to enable the Seller to perform the Contract in accordance with its terms. 3.3 The quantity, quality and description of the Goods shall, subject as provided in these Conditions, be as specified in the Quotation and/or in any applicable Specification supplied by the Buyer to the Seller or agreed in Writing by the Buyer. 3.4 The Seller reserves the right to make any changes in the specification of the Goods and the substances, chemicals and materials used to manufacture the Goods but any such changes shall not materially affect the quality or performance of the Goods. 3.5 The Goods shall be supplied subject to the tolerances set out in the Sellers catalogue and sales literature when the Contract is made. 3.6 If the Goods are to be manufactured or any process is to be applied to the Goods by the Seller in accordance with a specification submitted by the Buyer, the Buyer shall indemnify the Seller against all loss, damages, costs and expenses awarded against or incurred by the Seller in connection with or paid or agreed to be paid by the Seller in settlement of any claim for infringement of any patent, copyright, design, trade mark or other industrial or intellectual property rights of any other person which results from the Sellers use of the Buyers specification.
3.7 No order which has been accepted by the Seller may be cancelled by the Buyer except with the agreement in Writing of the Seller and on the terms that the Buyer shall indemnify the Seller in full against all loss (including loss of profit), costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Seller as a result of cancellation. 4. Price 4.1 Subject to 4.2, the Price shall be the Sellers ruling price as at the date of delivery of the Goods. Payment shall be made in sterling unless otherwise agreed. 4.2 The Seller reserves the right, by giving notice to the Buyer at any time before delivery, to increase the Price beyond the ruling price referred to in clause 4.1 to reflect any increase in the cost to the Seller which is due to any factor beyond the control of the Seller (such as, without limitation, any foreign exchange fluctuation, introduction of the Euro. currency regulation, alteration of duties, significant increase in the costs of labour, materials and other costs of manufacture), any change in delivery dates, quantities or specifications for the Goods which is requested by the Buyer, or any delay caused by any instruction of the Buyer or failure of the Buyer to give the Seller adequate information or instructions. 4.3 Except as otherwise stated under the terms of any quotation and unless otherwise agreed in Writing between the Buyer and the Seller, the Price shall be on an ex works basis, and where the Seller agrees to deliver the Goods otherwise than at the Sellers premises, the Buyer shall be liable to pay the Sellers additional charges for transport, packaging and insurance. 4.4 The Price and any additional charges payable hereunder shall be exclusive of any applicable value added tax or other tax or duty relating to the sale or delivery of the Goods, which the Buyer shall be additionally liable to pay to the Seller. 4.5 The cost of pallets and containers unless otherwise agreed in writing between the Buyer and the Seller will be charged to the Buyer in addition to the Price. 5. Terms of Payment 5.1 Subject to any special terms agreed in Writing between the Buyer and the Seller, the Seller shall be entitled to invoice the Buyer for the Price on or at any time after delivery of the Goods, unless the Goods are to be collected by the Buyer or the Buyer wrongfully fails to take delivery of the Goods, in which event the Seller shall be entitled to invoice the Buyer for the price at any time after the Seller has notified the Buyer that the Goods are ready for collection or (as the case may be) the Seller has tendered delivery of the Goods. 5.2 The Buyer shall pay the Price by the last day of the calendar month following delivery and the Seller shall be entitled to recover the Price, notwithstanding that delivery might not have taken place and the property in the Goods has not passed to the Buyer. The time of payment of the Price shall be of the essence of the Contract. Receipt for payment will be issued only upon request. 5.3 All amounts due under these Conditions shall be paid in full without any deduction or withholding and the Buyer shall not be entitled to assert any credit set-off or counterclaim against the Seller in order to justify withholding payment of any such amount in whole or in part. 5.4 If the Buyer fails to make any payment on the due date then, without prejudice to any other right or remedy available to the Seller, the Seller shall be entitled to: 5.4.1 cancel the Contract or suspend any further deliveries to the Buyer; 5.4.2 appropriate any payment made by the Buyer to such of the Goods or the Services (or the goods or services supplied under any other contract between the Buyer and the Seller) as the Seller may think fit (notwithstanding any purported appropriation by the Buyer); and 5.4.3 charge the Buyer interest from the due date up to the date of actual payment in full (both before and after any judgement) on the amount unpaid, at the rate of 4 per cent per annum above Barclays Bank base rate from time to time. Such interest shall accrue on a daily basis and be compounded quarterly. 6. Delivery 6.1 Delivery of the Goods shall be made by the Buyer collecting the Goods at the Sellers premises at any time after the Seller has notified the Buyer that the Goods are ready for collection on payment of the collection charge then specified in the Sellers price list or, if some other place for delivery is agreed by the Seller, the Seller delivery the Goods to that place. 6.2 In the event that the Seller is to deliver the Goods other than by making the same available for collection at its producing works, the method of carriage shall, unless otherwise agreed in Writing, be at the discretion of the Seller. Any transport or freight arranged or undertaken by the Seller shall be arranged or undertaken as agent for the Buyer and the Seller shall have no liability for any loss or damage to the Goods after the same have left the Sellers premises. The Seller may supply the Goods from any of its producing works. 6.3 The Seller shall only be obliged to deliver the Goods to a safe and suitable site at the place of delivery such as an area of hard standing. The Seller shall decide in its absolute discretion upon the safeness and suitability of any such site. 6.4 The Seller reserves the right to charge to the Buyer any costs, charges or expenses incurred by the Seller as a result of vehicle detention or demurrage of ships in consequence of any act or omission of the Buyer, its employees or agents, or as a result of special requirements or stipulations of the Buyer not provided for in the Contract. 6.5 Any dates quoted for delivery of the Goods are approximate only and the Seller shall not be liable for any delay in delivery of the Goods howsoever caused. Time for delivery shall not be of the essence of the Contract. The Goods may be delivered by the Seller in advance of the quoted delivery date upon giving reasonable notice to the Buyer. 6.6 Where the Goods are to be delivered in instalment, each delivery shall constitute a separate contract and failure by the Seller to deliver any one or more of the instalments in accordance with these Conditions or any claim by the Buyer in respect of any one or more instalments shall not entitle the Buyer to treat the Contract as a whole as repudiated. 6.7 If the seller fails to deliver the Goods (or any instalment) for any reason other than any cause beyond the Sellers reasonable control or the Buyers fault, and the Seller is accordingly liable to the Buyer, the Sellers liability shall be limited to the excess (if any) of the cost to the Buyer (in the cheapest available market) of similar goods to replace those not delivered over the Price. 6.8 If the Buyer fails to take delivery of the Goods within 7 days of notification that the Goods are ready for collection or fails to give the Seller adequate delivery instructions at the time stated for delivery (otherwise than by reason of any cause beyond the Buyers reasonable control or by reason of the Sellers fault) then, without prejudice to any other right or remedy available to the Seller, the Seller may: 6.8.1 deliver the Goods to the Buyers address on the Buyers order; or 6.8.2 store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of storage: or 6.8.3 sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) charge the Buyer for any shortfall below the price under the Contract.
7. Risk and Property 7.1 Risk of damage to or loss of the Goods shall pass to the Buyer:7.1.1 in the case of the Goods to be delivered at the Sellers premises, at the time when the Seller notifies the Buyer that the goods are available for collection; or 7.1.2 in the case of Goods to be delivered otherwise than at the Sellers premises, after the time the Goods have left the Sellers premises. 7.2 Notwithstanding delivery and the passing of risk in the Goods, or any other provision of these Conditions, the property in the Goods shall not pass to the Buyer until the Seller has received in cash or cleared funds payment in full of the Price and the price of all other goods and services agreed to be supplied by the Seller to the Buyer for which payment is then due. 7.3 Until such time as the property in the Goods passes to the Buyer, the Buyer shall hold the Goods as the Sellers fiduciary agent and bailee, and shall keep the Goods separate from those of the Buyer and third parties and properly stored and protected and insured and identified as the Sellers property, but shall be entitled to resell or use the Goods in the ordinary course of its business. 7.4 Until such time as the Property in the Goods passes to the Buyer (and provided the Goods are still in existence and have not been resold), the Seller shall be entitled at any time to require the Buyer to deliver up the Goods to the Seller and, if the Buyer fails to do so forthwith, to enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods. 7.5 The Buyer shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the Goods which remain the property of the Seller, but if the Buyer does so all moneys owing by the Buyer to the Seller shall (without prejudice to any other right or remedy of the Seller) forthwith become due and payable. 7.6 The Seller shall have a first and paramount lien over any goods or property of the Buyer in its possession for all sums due and payable to the Seller. 7.7 Risk of damage to or loss of any free issue material supplied by the Buyer to the Seller shall remain at all time with the Seller who shall bear full responsibility for insuring or otherwise safeguarding such material. 8. Warranties and Liability 8.1 Subject to the conditions set out below the Seller warrants that the Goods will correspond with the Specification at the time of delivery. 8.2 The above warranty is given by the Seller subject to the following conditions: 8.2.1 the Seller shall be under no liability in respect of any defect in the Goods arising from any Specification supplied by the Buyer; 8.2.2 the Seller shall be under no liability in respect of any defect arising from fair wear and tear, wilful damage, negligence, improper or unsuitable storage conditions, abnormal working conditions, failure to follow the Sellers instructions (whether oral or in writing), misuse or alteration of the Goods without the Sellers approval; 8.2.3 the Seller shall be under no liability under the above warranty (or any other warranty, condition or guarantee) if the total Price has not been paid by the due date for payment; 8.2.4 the above warranty does not extend to goods or materials not manufactured by the Seller, in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Seller. 8.3 Subject as expressly provided in these Conditions all warranties, conditions or other terms implied by statute or common law are excluded to the fullest extent permitted by law. 8.4 Any claim by the Buyer which is based on any failure of the Goods to correspond with the Specification shall (whether or not delivery is refused by the Buyer) be notified to the Seller within 7 days from the date of delivery or (where the defect or failure was not apparent on reasonable inspection) within a reasonable time after discovery of the defect or failure and in any event within 30 days of delivery. If delivery is not refused, and the Buyer does not notify the Seller accordingly, the Buyer shall not be entitled to reject the Goods and the Seller shall have no liability for such defect or failure, and the Buyer shall be bound to pay the Price as if the Goods had been delivered in accordance with the Contract. 8.5 Where any valid claim in respect of any of the Goods which is based on any defect in quality or condition thereof or their failure to meet the Specification is notified to the Seller in accordance with these conditions the Buyer shall give the Seller a reasonable opportunity to inspect the Goods prior to use or processing. The Seller shall be entitled to replace the Goods (or the part in question) free of charge or, at the Sellers sole discretion, refund to the Buyer the Price (or a proportionate part of the price), but the Seller shall have no further liability to the Buyer. 8.6 Except in respect of death or personal injury caused by the Sellers negligence, the Seller shall not be liable to the Buyer by reason of any implied warranty, condition or other term, or any duty at common law, or under the express terms of the contract, for any indirect, special or consequential loss or damage (whether for loss of profit or otherwise), cost, expenses or other claims for compensation whatsoever (whether caused by the negligence of the Seller, its employees or agents or otherwise) which arise out or in connection with the supply of the Goods or their use or resale by the Buyer, and the entire liability of the Seller under or in connection with the contract shall not exceed the Price, except as expressly provided in these Conditions. 8.7 The Buyer acknowledges and accepts that it does not rely on, and shall have no remedy in respect of, any statement, representation, warranty or understanding (whether negligently or innocently made) of any person (whether party to the Contract or not) other than as expressly set out in these Conditions as a warranty. Nothing in this clause shall, however, operate to limit or exclude any liability for fraud. 8.8 The Seller shall not be liable to the Buyer or be deemed to be in breach of the Contract by reason of any delay in performing, or any failure to perform, any of the Sellers obligations in relation to the Goods, if the delay or failure was due to any cause beyond the Sellers reasonable control. Without prejudice to the generality of the foregoing, the following shall be regarded as causes beyond the Sellers reasonable control: 8.8.1 Act of God, explosion, flood, tempest, fire or accident;
8.8.7 power failure or breakdown in machinery or computer equipment; 8.8.8 failure of sub-contractors.
8.9 In the event that any of the circumstances referred to in 8.8 continue for a continuous period of 30 days and is continuing at the end of that time to such an extent that substantial performance of the contract is prevented then either the Buyer or the Seller shall be entitled to give written notice terminating the contract with immediate effect. In the event that the contract is so terminated, the Seller shall be entitled to be paid in full for all work completed to the date of termination and a fair proportion for any work partially completed. 8.10 The Seller shall endeavour to ensure that its business systems are year 2000 compliant but does not make any representations nor give any warranties in respect of such compliance. The Seller shall not be liable to the Buyer or be deemed to be in breach of the Contract by reason of any delay in performing or any failure to perform any of the Sellers obligations in relation to the delivery of the Goods, if the delay or failure arises from or is connected to the changes arising before, during or after the year 2000 9. Insolvency of Buyer 9.1 This clause applies if: 9.1.1 the Buyer makes any voluntary arrangement with its creditors or (being an individual or firm) becomes bankrupt or (being a company) becomes subject to an administration order or goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction); or 9.1.2 an encumbrancer takes possession, or a receiver is appointed, of any of the property or assets of the Buyer: or 9.1.3 the Buyer ceases, or threatens to cease, to carry on business or (being a company) is wound up or dissolved (and no such step shall be taken by or on behalf of the Buyer without the Seller being given at least 5 business days prior written notice thereof); or 9.1.4 steps are taken, proposed or threatened in respect of any of the events mentioned above or the Seller reasonably apprehends that any of the events mentioned above is about to occur in relation to the Buyer and notifies the Buyer accordingly. 9.2 If this clause applies then, without prejudice to any other right or remedy available to the Seller, the Seller shall be entitled to cancel the Contract or suspend any further deliveries under the Contact without liability to the Buyer, and if the Goods have been delivered but not paid for the Prices shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary. 10. Export Terms 10.1 Where the Goods are supplied for export from the United Kingdom, the provisions of this clause 11 shall (subject to any special terms agreed in writing between the Buyer and the Seller) apply notwithstanding any other provision of these Conditions. 10.2 The Buyer shall be responsible for complying with any legislation or regulations governing the importation of the Goods into the country of destination and for the payment of any duties on them. 10.3 The Buyer shall be responsible for arranging for testing and inspection of the Goods at the Sellers premises before shipment. The Seller shall have no liability for any claim in respect of any defect in the Goods which would be apparent on inspection and which is made after shipment, or in respect of any damage during transit. 10.4 Unless otherwise agreed in Writing between the Buyer and the Seller, the Goods shall be delivered FOB the air or sea port of shipment and the Seller shall be under no obligation to give notice under section 32(3) of the Sale of Goods Act 1979. 10.5 Any marine insurance required to be effect by the Seller under the Contract shall, unless otherwise agreed in writing, be 10% over the invoice price and shall cover the interest from the commencement of transit to the destination named in the Contract as provided and contained in the Institute of London Underwriters ("the Institute") Cargo Clauses, the Institutes War Clauses and the Institutes Strikes, Riots and Civil Commotion Clauses, current at the time of shipment. 11. ECSC 11.1 The Order must show the final destination of the Goods and this destination may not be altered without the prior written consent of the Seller. 11.2 The goods are sold on the condition that they will not be re-sold by the Buyer or its buyers or sub-buyers for delivery in an unprocessed state outside the Territory of the ECSC. The Buyer shall be responsible for any breach of this condition and the Buyer shall also be responsible for ensuring that no goods sold to him by the Seller for delivery outside the ECSC shall be re-imported in an unprocessed state into the ECSC either by the Buyer or any of its buyers or sub-buyers. On receipt of a written demand from the Seller, the Buyer shall produce evidence of the ultimate destination of the Goods. 11.3 If the Buyer re-sells in an unprocessed state any goods bought from the Seller then, unless such resale is made from stock, the Buyer shall comply in respect of such resale with the requirement of High Authority Decision NO. 30/53 (as amended from time to time) and also comply, as appropriate, with High Authority Decision No. 31/53 (as amended from time to time) or High Authority Decision No. 37/54 (as amended from time to time) and also comply with all other applicable requirements from time to time of the High Authority or of the European commission. The references in this Condition of the High Authority are to the High Authority of the ECSC constituted by the Treaty of Paris of 18 April 1951. 12. General 12.1 Any notice required or permitted to be given by either party to the other under these Conditions shall be in Writing addressed to that other party at its registered office or principal place of business or such other address as may at the relevant time have been notified pursuant to this provision to the party giving notice. 12.2 No waiver by the Seller of any breach of the Contract by the Buyer shall be considered as a waiver of any subsequent breach of the same or any other provision. 12.3 If any provision of these Conditions is held by any competent authority to be invalid or unenforceable in whole or in part the validity of the other provisions of these conditions and the remainder of the provision in question shall not be affected. 12.4 The Contract shall be governed by the laws of England, and the Buyer agrees to submit to the exclusive jurisdiction of the English courts.
8.8.2 war or threat or war, sabotage, insurrection, civil disturbance or requisition; 8.8.3 acts, restrictions, regulations, bye-laws, prohibitions or measures of any kind on the part of any governmental, parliamentary or local authority; 8.8.4 import or export regulations or embargoes;
8.8.5 strikes, lock-outs or other industrial actions or trade disputes (whether involving employees of the Seller or of a third party); 8.8.6 difficulties in obtaining raw material, labour, fuel, parts or machinery
www.brc.ltd.uk
Scotland
BRC Newhouse Block 14, Newhouse Industrial Estate, Newhouse, Motherwell ML1 5SE Tel: 01698 732343 Fax: 01698 833894 Email: sales@scotland.brc.ltd.uk
North East
BRC Darlington Skerne Works, Dodsworth Street, Albert Hill, Darlington, County Durham DL1 2NG Tel: 01325 381166 Fax: 01325 284124 Email: sales@northeast.brc.ltd.uk
North West
BRC Oldham Gould Street, Oldham, Lancashire OL1 3LZ Tel: 0161 620 1001 Fax: 0161 620 1660 Email: sales@northwest.brc.ltd.uk
North
BRC Barnsley Whaley Road, Barugh, Barnsley, South Yorkshire S75 1HT Tel: 01226 730330 Fax: 01226 771797 Email: sales@north.brc.ltd.uk
Midlands
BRC Mansfield 79 Station Road, Sutton in Ashfield, Mansfield, Nottinghamshire NG17 5FR Tel: 01623 555111 Fax: 01623 440932 Email: sales@midlands.brc.ltd.uk
Wales & West

BRC Newport Corporation Road, Newport, Gwent NP19 4RD Tel: 01633 280816 Fax: 01633 283469 Email: sales@walesandwest.brc.ltd.uk
South East
BRC London Unit 13, Kierbeck Business Complex, North Woolwich Road, Silvertown, London E16 2BG Tel: 020 7474 1800 Fax: 020 7474 8686 Email: sales@southeast.brc.ltd.uk
South
BRC Southampton Belbins Business Park, Cupernham Lane, Romsey, Hampshire SO51 7JF Tel: 01794 521158 Fax: 01794 521154 Email: sales@south.brc.ltd.uk
South West
BRC Plymouth Unit C, Kingsley Close, East Way, Lee Mill Trading Estate, Ivybridge, Plymouth, Devon PL21 9LL Tel: 01752 894660 Fax: 01752 896761 Email: sales@southwest.brc.ltd.uk
Finance office
BRC Wokingham 11 Mulberry Business Park, Fishponds Road, Wokingham, Berkshire RG41 2FH Tel: 0118 977 3822 Fax: 0118 977 3913 Email: enquiries@wokingham.brc.ltd.uk
Other BRC companies

BRC Special Products Carver Road, Astonfields Industrial Estate, Stafford ST16 3BP Tel: 01785 222288 Fax: 01785 240029 Email: stafford.enquiries@brc-special-products.co.uk Website: www.brc-special-products.co.uk Weldgrip Geotechnical Unit 19, Redbrook Business Park, Wilthorpe Road, Barnsley, South Yorkshire S75 1JN Tel: 01226 280567 Fax: 01226 731563 Email: tech@weldrip.com Website: www.weldgrip.com
VIRCO-03.06

BRC Catalogue

Uploaded by

Copyright:

Available Formats

BRC Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BRC Catalogue

Uploaded by

Copyright:

Available Formats

the essential guide to reinforcing concrete

the essential guide to reinforcing concrete

Customer service, quality systems, technical support, competitive prices

Midlands North North East

01623 555111 01226 730330 01325 381166

North West South South East

0161 620 1001 01794 521158 020 7474 1800

Bar & fabric products

Cut and bent reinforcement

solutions are available to suit site skill levels.

details are available.

in packages for ease of planning.

detailed to suit lifting equipment.

Bases and pile caps

units for speed of placing.

can be converted to mats for faster construction cycles.

be detailed to suit specific applications.

Midlands North North East

01623 555111 01226 730330 01325 381166

North West South South East

0161 620 1001 01794 521158 020 7474 1800

Bar & fabric products

Reinforcement shape codes to BS8666:2005

L=A + (B) 0.5r d

L=A + (B) 0.43R 1.2d

L=A + 0.57B + (C) 1.6d

L=A + B + C + (D) 1.5r 3d

L=A + B + (C) 0.5r d

L=A + B + (C) 0.5r d

L=A + B + C + (D) 1.5r 3d

L=A + B + C + (D) 1.5r 3d

L=2A + 1.7B + 2(C) 4d

L=A + B + C + (E) 0.5r d

L=A + B + C + (E) 0.5r d

L=2A + B + 2(C) + 1.5r 3d

L=2(A + B + (C)) 2.5r 5d

L=A + B + C + D + 2(E) - 2.5r - 5d

L=A + B + C + 2D+E + (F) 3r 6d

B (D) Isometric sketch

(B) B is the overlap

Table of minimum dimensions

Minimum radius for scheduling

Minimum diameter for bending former

12 16 20 24 32 70 87 112 140 175

24 32 40 48 64 140 175 224 280 350

*6mm and 50mm are non-preferred sizes available to special order

Bar & fabric products

Reinforcing bar technical data

*6mm and 50mm are non-preferred sizes available to special order

*6mm and 50mm are non-preferred sizes available to special order

*6mm and 50mm are non-preferred sizes available to special order

(incl. reinforcement for subsequent bending) +25 -25

Midlands North North East

01623 555111 01226 730330 01325 381166

North West South South East

0161 620 1001 01794 521158 020 7474 1800

Bar & fabric products

BS8666:2005 FABRIC BRC REF.

MESH SIZE NOMINAL PITCH OF WIRES

CROSS SECTION AREA PER METRE WIDTH