Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 339 views

    ACI 02 - Spread Footing Design r2

    Uploaded by

    Omar Rubio
    This document contains the design calculations for a spread footing with the following parameters: - Pedestal width and depth of 1.5 ft each - Footing width and length of 8 ft each - Thickness of 2 ft and pedestal height of 1 ft The calculations include bearing capacity checks, moment design, reinforcing requirements, and shear checks that confirm the design satisfies code requirements. Load combinations of 463 kips and 100 psf uniform load are analyzed.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd

    ACI 02 - Spread Footing Design r2

    Uploaded by

    Omar Rubio
    339 views9 pages
    This document contains the design calculations for a spread footing with the following parameters: - Pedestal width and depth of 1.5 ft each - Footing width and length of 8 ft each - Thickness of 2 ft and pedestal height of 1 ft The calculations include bearing capacity checks, moment design, reinforcing requirements, and shear checks that confirm the design satisfies code requirements. Load combinations of 463 kips and 100 psf uniform load are analyzed.

    Original Description:

    footing design

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the design calculations for a spread footing with the following parameters: - Pedestal width and depth of 1.5 ft each - Footing width and length of 8 ft each - Thickness of 2 ft and pedestal height of 1 ft The calculations include bearing capacity checks, moment design, reinforcing requirements, and shear checks that confirm the design satisfies code requirements. Load combinations of 463 kips and 100 psf uniform load are analyzed.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    339 views9 pages

    ACI 02 - Spread Footing Design r2

    Uploaded by

    Omar Rubio
    This document contains the design calculations for a spread footing with the following parameters: - Pedestal width and depth of 1.5 ft each - Footing width and length of 8 ft each - Thickness of 2 ft and pedestal height of 1 ft The calculations include bearing capacity checks, moment design, reinforcing requirements, and shear checks that confirm the design satisfies code requirements. Load combinations of 463 kips and 100 psf uniform load are analyzed.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 9

    Job #: By: Sheet:

    20005 EAN

    DESIGN OF SPREAD FOOTINGS - BEARING


    Program written by Erik Nelson (9/27/00)

    Date:

    5/25/2013

    Description Pedestal Width, x Pedestal Depth, y Width , W Length, L Thickness of footing, t Height of Pedestal, h Height of Soil above top of Footing, hs Unit Weight Concrete Unit Weight Soil Allowable Bearing Capacity, Fall

    B.1 1.50 1.50 8.00 8.00 2.00 1.00 1.00 145 115 16 ft ft ft ft ft ft ft pcf pcf ksf

    L = 8 ft
    x y x

    W = 8 ft

    Column Load, P (k) = Shear, Vx (k) = Shear, Vy (k) = Moment , Mx (k-ft) = Moment, My (k-ft) = Surcharge and/or Uniform Load (psf) =

    Load Combo 1 Load Combo 2 463.00 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100 100

    z x h
    hs

    BEARING CHECK
    Load Combo 1 Load Combo 2 18.56 18.56 0.33 0.33 7.10 7.10 6.18 6.18 495.16 132.16 64.00 64.00 7.74 2.07 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

    SW of Footing = Pf = SW of Pedestal = Pp = SW of Soil = Ps = Load from Surcharge/Uniform, Pl = Total Load, Pt = P + Pf + Pp + Ps + Pl = Area of Footing, Af = Axial Stress, fa = Pt/Af = Add'l Moment, Mx' = -Vy(t + h) = Add'l Moment, My' = Vx(t + h) = Total Moment, Mxt = Mx + Mx' = Total Moment, Myt = My + My' = Bending Stress, fbx = 6*Mx/(L^2*W) = Bending Stress, fby = 6*My/(L*W^2) = eW = My/P eL = Mx/P STRESS AT CORNERS f1 = fa + fbx - fby = f2 = fa - fbx - fby = f3 = fa - fbx + fby = f4 = fa + fbx + fby = Is there separation between foundation and soil? fmax w fmax L fmax Is f1,f2,f3,f4, and f5 < Fall? Is e > B/2? Is e > L/2?

    k k k k k ft^2 ksf

    7.7ksf
    f2

    7.7ksf
    f3

    7.74 7.74 7.74 7.74 no 7.74 OK OK OK

    2.07 2.07 2.07 2.07 no 2.07 OK OK OK

    ksf ksf ksf ksf

    f1

    f4

    7.7ksf ksf ksf ksf

    7.7ksf

    Job #: By: Sheet:

    20005 EAN

    DESIGN OF SPREAD FOOTINGS - BEARING


    Program written by Erik Nelson (9/27/00)

    Date:

    5/25/2013

    Description

    B.1

    MOMENT DESIGN ACI-02


    Factored Max Soil Pressure, qs Fy f'c Concrete Cover BOTTOM BARS No. of Bars Bar # SPACING OF BARS Actual Spacing of Bars Min Spacing of Bars Spacing Satisfies Code? 10.8 60 4 3.5 X -Bars 8 9 11.43 18.00 OK 3.25 8 1.61 1.13 8.00 0.65 2.18% 1.63% 0.18% 0.43% OK 1.471 671 458 OK 1.00 ksf ksi ksi in Y - Bars 8 9 W = 8 ft 11.43 18.00 OK 3.25 8 1.61 1.13 8.00 0.65 2.18% 1.63% 0.18% 0.43% OK 1.471 671 458 OK in in

    Y - Bars

    L = 8 ft
    X - Bars

    REINFORCING Trib for Moment, t "Wide Beam" Width Depth Steel Diameter Steel Area ACI 10.2.7.3 Beta ACI 10.3.2 Rho Balanced ACI 10.3.3 Max Rho = 0.75(Rho bal) ACI 10.5.1, ACI 7.12.2.1 Shrinkage/Temp Min Rho Actual Steel Ratio, Rho Reinforcing Satisfies Code? STRENGTH ACI 10.2.7 a phi Mn Mu Strength Satisfies Code? REINFORCING BANDWIDTH ACI 15.4.4.2 2/(beta+1) ft ft ft in^2 in^2
    ty

    Critical Section for Moment

    tx

    k-ft k-ft

    (for distribution of reinforcing in rectangular footings)

    WIDE BEAM SHEAR


    ACI 11.12.1 Trib for One Way Shear, t "Wide Beam" phi Vc Vu One Way Shear Check 1.64 1062 142 OK 1.64 1062 142 OK ft k k
    ty d Critical Section for One Way Shear
    tx

    PUNCHING SHEAR
    ACI 11.12.2 Perimeter, bo Beta Loaded Area "Punching Shear" phi Vc Vu Two Way Shear Check 12 1.00 54.30 3308 588 OK ft ft^2 k k
    d/2

    Critical Section for Two Way Shear

    Job #: By: Sheet:

    20005 EAN

    DESIGN OF SPREAD FOOTINGS - BEARING


    Program written by Erik Nelson (9/27/00)

    Date:

    5/25/2013

    Description

    B.1

    CONCRETE BEARING
    Concrete Bearing Strength, qc Factored Column Load Bearing Satisfies Code? 1542.24 693.23 OK k k VERIFY 02

    DESIGN OF SPREAD FOOTINGS


    Program written by Erik Nelson (9/27/00)

    Description / Location Pedestal Width, x Pedestal Depth, y Width , W Length, L Thickness of footing, t Height of Pedestal, h Height of Soil above top of Footing, hs Unit Weight Concrete Unit Weight Soil Allowable Bearing Capacity, Fall 2.00 2.00 8.00 8.00 2.00 3.00 1.00 145 115 5 Load Combo 1 100.00 0.00 0.00 0.00 0.00 100 ft ft ft ft ft ft ft pcf pcf ksf Load Combo 2 100.00 0.00 10.00 0.00 0.00 100

    L = 8 ft
    x y x

    W = 8 ft

    Column Load, P (k) = Shear, Vx (k) = Shear, Vy (k) = Moment , Mx (k-ft) = Moment, My (k-ft) = Surcharge and/or Uniform Load (psf) = BEARING CHECK

    z
    x h hs

    SW of Footing = Pf = SW of Pedestal = Pp = SW of Soil = Ps = Load from Surcharge/Uniform, Pl = Total Load, Pt = P + Pf + Pp + Ps + Pl = Area of Footing, Af = Axial Stress, fa = Pt/Af = Add'l Moment, Mx' = -Vy(t + h) = Add'l Moment, My' = Vx(t + h) = Total Moment, Mxt = Mx + Mx' = Total Moment, Myt = My + My' = Bending Stress, fbx = 6*Mx/(L^2*W) = Bending Stress, fby = 6*My/(L*W^2) = eW = My/P eL = Mx/P STRESS AT CORNERS f1 = fa + fbx - fby = f2 = fa - fbx - fby = f3 = fa - fbx + fby = f4 = fa + fbx + fby = Is there separation between foundation and soil? fmax w fmax L fmax Is f1,f2,f3,f4, and f5 < Fall? Is e > B/2? Is e > L/2?

    Load Combo 1 18.56 1.74 6.90 6.00 133.20 64.00 2.08 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

    Load Combo 2 18.56 1.74 6.90 6.00 133.20 64.00 2.08 -50.00 0.00 -50.00 0.00 -0.59 0.00 0.00 -0.38

    k k k k k ft^2 ksf

    2.7ksf 2.1ksf
    f2

    2.7ksf 2.1ksf
    f3

    2.08 2.08 2.08 2.08 no 2.08 OK OK OK

    1.50 2.67 2.67 1.50 no 2.67 OK OK OK

    ksf ksf ksf ksf

    f1 2.1ksf 1.5ksf

    f4 2.1ksf 1.5ksf

    ksf ksf ksf

    DESIGN OF SPREAD FOOTINGS


    Program written by Erik Nelson (9/27/00)

    Description / Location MOMENT DESIGN ACI-02 Factored Max Soil Pressure, qs Fy f'c Concrete Cover BOTTOM BARS No. of Bars Bar # SPACING OF BARS Actual Spacing of Bars Min Spacing of Bars Spacing Satisfies Code? Trib for Moment, t "Wide Beam" Width Depth Steel Diameter Steel Area Beta Rho Balanced Max Rho = 0.75(Rho bal) Shrinkage/Temp Min Rho Actual Steel Ratio, Rho Reinforcing Satisfies Code? a phi Mn Mu Strength Satisfies Code? 2/(beta+1) 3.7 60 4 3.5 X -Bars 8 9 11.43 18.00 OK 3 8 1.61 1.13 8.00 0.65 2.18% 1.63% 0.18% 0.43% OK 1.471 671 134 OK 1.00 ksf ksi ksi in Y - Bars 8 9 11.43 18.00 OK 3 8 1.61 1.13 8.00 0.65 2.18% 1.63% 0.18% 0.43% OK 1.471 671 134 OK in in

    L = 8 ft

    Y - Bars X - Bars

    W = 8 ft

    REINFORCING ft ft ft in^2 in^2


    ty

    ACI 10.2.7.3 ACI 10.3.2 ACI 10.3.3 ACI 10.5.1, ACI 7.12.2.1

    STRENGTH ACI 10.2.7

    Critical Section for Moment

    tx

    k-ft k-ft

    REINFORCING BANDWIDTH ACI 15.4.4.2 WIDE BEAM SHEAR

    (for distribution of reinforcing in rectangular footings)

    ACI 11.12.1

    Trib for One Way Shear, t "Wide Beam" phi Vc Vu One Way Shear Check

    1.39 1062 41 OK

    1.39 1062 41 OK

    ft k k
    d Critical Section for One Way Shear

    ty

    tx

    PUNCHING SHEAR ACI 11.12.2 Perimeter, bo Beta Loaded Area "Punching Shear" phi Vc Vu Two Way Shear Check 14 1.00 50.94 3839 190 OK ft ft^2 k k

    d/2

    Critical Section for Two Way Shear

    bar 0 3 4 5 6 7 8 9 10 11 14 LCE TABLE bar 3 4 5 6 7 8 9 10 11 LCS TABLE bar 3 4 5 6 7 8 9 10 11 LTE TABLE bar 3 4 5 6 7 8 9 10 11 LTS TABLE

    db 0 0.375 0.5 0.625 0.75 0.875 1 1.128 1.27 1.41 1.693

    area 0.00 0.11 0.20 0.31 0.44 0.60 0.79 1.00 1.27 1.56 2.25

    bar 0 3 4 5 6 7 8 9 10 11 14

    8 11 14 17 19 22 25 28 31

    12 15 19 23 26 30 34 38 42 Top CAT 1 14 19 24 28 30 36 45 57 70 Top CAT Top CAT 2 14 19 24 33 38 50 63 80 98 Top CAT Top CAT 3 14 20 31 44 55 71 90 114 139 Top CAT LTE TABLE bar 3 4 5 6 7 8 9 10 11 LTS TABLE

    fy 40 50 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

    rho 0.002 0.0018 0.0018 0.00177 0.001742 0.001714 0.001688 0.001662 0.001636 0.001612 0.001588 0.001565 0.001543 0.001521 0.0015 0.001479 0.001459 0.00144 0.001421 0.001403 0.001385 0.001367 0.00135 0.001333 0.001317 0.001301 0.001286 0.001271 0.001256 0.001241 0.001227 0.001213 0.0012

    Other CAT 1 12 15 18 22 23 27 35 45 54 Other CAT

    Other CAT 2 12 15 18 24 29 38 49 62 75 Other CAT

    bar 3 4 5 6 7 8 9 10 11

    1 19 25 32 37 39 46 59 76 92

    2 19 26 32 43 50 65 81 104 126

    3 19 26 41 57 71 92 117 148 183

    bar 3 4 5 6 7 8 9 10 11

    1 16 20 24 29 30 36 45 58 71

    2 16 20 24 32 38 50 64 81 98

    Other CAT 3 12 16 24 34 42 54 69 88 108 Other CAT

    3 16 21 32 44 54 71 90 114 141

    You might also like