Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
373 views

Mikrobus Specification

MikroElektronika engineers have come up with a simple but brilliant pinout with lines that most of today's accessory boards require. MikroBUS(tm) host connector consists of two 1x8 female headers containing pins that are most likely to be used in the target accessory board. There are also single pins for PWM, Interrupt, Analog input, Reset and Chip Select.

Uploaded by

eeindustrial
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
373 views

Mikrobus Specification

MikroElektronika engineers have come up with a simple but brilliant pinout with lines that most of today's accessory boards require. MikroBUS(tm) host connector consists of two 1x8 female headers containing pins that are most likely to be used in the target accessory board. There are also single pins for PWM, Interrupt, Analog input, Reset and Chip Select.

Uploaded by

eeindustrial
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

mikroBUS pinout

standard specification
1100mil 900mil

What is mikroBUS?
As we in mikroElektronika see it, plug-and-play devices with minimum settings are the future in embedded world. This is why our engineers have come up with a simple but brilliant pinout with lines that most of todays accessory boards require, which almost completely eliminates the need of additional hardware settings. We called this new standard the mikroBUS.

mikroBUS host connector


Each mikroBUS host connector consists of two 1x8 female headers containing pins that are most likely to be used in the target accessory board. There are three groups of communication pins: SPI, UART and I2C communication. There are also single pins for PWM, Interrupt, Analog input, Reset and Chip Select. Pinout contains two power groups: +5V and GND on one header and +3.3V and GND on the other 1x8 header. mikroBUS host connector perfecty fits into standard breadboards.

1125mil

800mil

100mil 100mil 50mil 100mil 50mil

AN CS

- Analog pin - SPI Chip Select line

PWM - PWM output line INT RX TX SCL - Hardware Interrupt line - UART Receive line - UART Transmit line - I2C Clock line

RST - Reset pin SCK - SPI Clock line MISO - SPI Slave Output line MOSI - SPI Slave Input line +3.3V - VCC-3.3V power line GND - Reference Ground

SDA - I2C Data line +5V - VCC-5V power line GND - Reference Ground

Integration in your designs


mikroBUS is not made to be only a part of our development boards. You can freely place mikroBUS host connectors in your final PCB designs, as long as you clearly mark them on the silkscreen with mikroBUS footprint specifications which can be downloaded from the following link: http://www.mikroe.com/ download/mikrobus_specs.zip

Click boards are plug-n-play


mikroElektronikas portfolio of almost 200 accessory boards is now enriched by an additional set of mikroBUS compatible Click boards. It is our intention to provide the community with as much of these boards as possible, so you will be able to expand your designs with additional functionality and minimim hardware configuration. Just plug and play.

Can I make mikroBUS boards?


You are allowed to produce and sell your own mikroBUS compatible boards, as long as you place mikroBUS logo on the board silkscreen. It would be nice to hear about it, so send us an E-mail to office@mikroe.com. You are not allowed to call it Click board though, because Click is the trademark of mikroElektronika.

Copyright mikroElektronika, November 2012. All rights reserved.

for more information, please visit

www.mikroe.com

You might also like