Acron MC Microwavable Flask: GC Lab Technologies Inc
Acron MC Microwavable Flask: GC Lab Technologies Inc
Acron MC Microwavable Flask: GC Lab Technologies Inc
The Acron MC Microwavable Flask is constructed of fiber reinforced plastic which allows it to accept the strenuous pressure when packing a denture along with the heat associated while microwave curing.
4. 5.
6.
7.
8.
10. After curing, allow the flask to cool at room temperature for 20 to 30 minutes and then immerse in cold water for complete cooling before deflasking (about 20 minutes). 11. After the denture has cooled begin deflasking. Remove the uppermost section of the flask exposing the stone. With a hard plastic hammer or a wooden mallet, tap on the knock-out plate on the bottom of the flask to release the mold completely from the flask. Then tap the stone to free the middle section from the mold. Proceed to deflask denture using plaster-snips, a plaster knife, etc. 12. Finish and polish in the usual manner.
2460600