Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 328 views

    Cut Point 7 4P

    Uploaded by

    sunil
    1. The document provides an erection schedule for a 11KV 4P tapping point on a main 11KV line using a 140kg 8m long PCC pole. 2. It lists 16 items needed for the pole erection including the pole, insulators, cross arms, stays, hardware, earthing, and concrete work. 3. Unit rates and quantities are provided for each item for costing purposes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd

    Cut Point 7 4P

    Uploaded by

    sunil
    328 views4 pages
    1. The document provides an erection schedule for a 11KV 4P tapping point on a main 11KV line using a 140kg 8m long PCC pole. 2. It lists 16 items needed for the pole erection including the pole, insulators, cross arms, stays, hardware, earthing, and concrete work. 3. Unit rates and quantities are provided for each item for costing purposes.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides an erection schedule for a 11KV 4P tapping point on a main 11KV line using a 140kg 8m long PCC pole. 2. It lists 16 items needed for the pole erection including the pole, insulators, cross arms, stays, hardware, earthing, and concrete work. 3. Unit rates and quantities are provided for each item for costing purposes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    328 views4 pages

    Cut Point 7 4P

    Uploaded by

    sunil
    1. The document provides an erection schedule for a 11KV 4P tapping point on a main 11KV line using a 140kg 8m long PCC pole. 2. It lists 16 items needed for the pole erection including the pole, insulators, cross arms, stays, hardware, earthing, and concrete work. 3. Unit rates and quantities are provided for each item for costing purposes.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    Erection Schedule 26-A

    11 KV 4P for Tapping point on main 11 KV line on 140 Kg 8 Mtr long PCC pole

    S. No
    1 1

    Description
    2
    Pit digging, transportation of pole from dump location to pole pit & complete pole erection with earthing for PCC pole 140 Kg 8.0 M long

    BOQ UOM qty (per PO Rate 4P)


    3
    Nos

    4 4

    5 700

    Fixing of DC cross arm 4 feet centre 2a galvanized channel 100x50x6 mm 2.2 M (53.4 kg) 2b
    Alternate DC Channel 8 ft Centre (2.8 mtr) and 56.3 kg

    Set

    50 50 10

    Set Nos

    3 Fixing of 11KV pin insulator with GI Pin Fixing of Horizontal and cross bracing set 4 feet centre with 4 back clamps made out 4 of horizontal and cross bracing galvanized angle 50x50x6 mm (45 Kg) 5 Installation of 11KV disc insulator 6 Installation of 11KV strain hardware Pit digging & erection of stay set 16mm 7 complete with turn buckle, stay insulator and anchor plate. Fixing of Stay clamp of galvanized flat 8 50x6mm (1.35 Kg) Fixing of Stay wire 7/3.15 mm. (5.5 kg per 9 stay) maximum 10 11KV Danger Board 11 Anti-climbing devices 12

    Set

    50

    Nos Nos Set

    9 9 4 4 22
    1 4 6 4

    15

    Set Kg Nos Nos Kg Set

    250

    10 10
    -

    Galvanized nuts & bolts with washer. (assorted size)

    13 Earthing of pole (coil earth) Concreting for pole and base padding @ 0.5 & 0.05 cmt per pole respectively 14 (Concrete mixture 1:3:6) with civil materials

    350
    2,300

    Cmt.

    Concreting of stay @ 0.3 cmt. per stay


    15 (Concrete mixture 1:3:6) with civil
    Cmt. Nos Nos 1.2 1 6

    2,300 10 5

    materials
    16 Numbering of four Pole 17 Fixing of PG clamp
    Additional Items 1 2 ABC XYZ

    Page 1 of 4

    Page 2 of 4

    Erection Schedule 27-A


    Single Pole Cut Point

    S. No

    Description

    BOQ UOM qty (per PO Rate CP)


    3
    Nos Nos Nos Set

    1 2 1 140 Kg., 8.0 Mtrs. long PCC poles 2 11 KV Pin insulator with GI pin 3 11KV Disc Insulator with Hardware 4 5 Galvanised Stay set 16 mm. complete with turn buckle , stay insulator and anchor plate Stay Clamp galvanised 50x6 mm flat(1.35Kg)

    4 1 3 6 2 2 11 1 1 6 1 4 0 1 0.5 0.6 3 1

    5 700 10 15

    Set Kg Nos Nos Nos Set

    250

    6 Stay wire 7/3.15mm (5.5Kg) per stay set 7 11KV Danger board 8 Anticlimbing device 9 Fixing of PG clamp 10a Horizontal Cross arm DC Channel 1.2 mtr with strain plates (24kg) (1set = 2Nos)

    10 10 5 50 -

    10b Fish Plate 11 Back Clamp Galvanised MS Flat 50x6 (1.1 kg) 12 Pole Top Bracket

    Nos Nos Nos Cmt.

    20
    2,300 2,300 350

    Cement concreting for Pole and base 13 padding @0.5 & 0.05cmt per pole respectively (Concrete mixture (1:3:6)
    14
    Cement concreting for Stay @0.3 cmt per stay (Concrete mixture (1:3:6)

    Cmt. Kg Set

    15 Galvanised nuts & Bolts with washers 16 Earthing Set (Coil earth)
    Additional Items 1 2 ABC XYZ

    Page 3 of 4

    Page 4 of 4

    You might also like