Bd-L- PLASTERING AND POINTING

Sr. No. & Item Code 1 Bd-L 1 DESCRIPTION OF ITEMS Providing internal cement plaster 6 mm thick in a single coats in ______________ without neeru finish to concrete surface in all positions including scaffolding and curing complete. Spec. No.: Bd.L. 1 Page No. 367 a) cement mortar 1:4 b) cement mortar 1:3 Providing internal cement plaster 12 mm thick in a single coats in ______________ without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No.: Bd.L.2 Page No. 368 a) cement mortar 1:5 b) cement mortar 1:4 c) cement mortar 1:3 Providing internal cement plaster 20 mm. thick in two coats in ------------------------ without neeru finish, to concrete brick surface, in all positions including scaffolding and curing complete. Spec. No.: Bd.L.4 Page No. 368 a) cement mortar 1:5 b) cement mortar 1:4 c) cement mortar 1:3 Providing internal cement plaster 25 mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick or stone surfaces, in positions including scaffolding and curing complete. Spec. No.: Bd.L.5 Page No. 368 Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. Spec. No.: Bd.L.7 Page No. 369 Unit Rate for 2012-2013 (in Rs.) Completed Labour

Sq.Mt. Sq.Mt.

92.00 95.00

63.00 63.00

2 Bd-L 2

Sq.Mt. Sq.Mt. Sq.Mt.

125.00 135.00 142.00

73.00 73.00 73.00

3 Bd-L 4

Sq.Mt. Sq.Mt. Sq.Mt. Sq.Mt.

225.00 235.00 255.00 280.00

140.00 140.00 140.00 160.00

4 Bd-L 5

5 Bd-L 7

Sq.Mt.

340.00

210.00

37

Sr. No. & Item Code 6 Bd-L 8

DESCRIPTION OF ITEMS Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonary surfaces in all positions with base coat of 12 to 15 mm thick in cement mortar 1:4 and rough cast treatment 12 mm thick in portion 1:1 1/2:3 including scaffolding and fourteen days curing complete. Spec. No.: Bd.L.8 Page No. 370 Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/brick/ stone masonry surfaces in all positions with base coat 12 to 15 mm thick in cement mortar 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:11/2:3 using colour pigment including scaffolding and fourteen days curing etc. completed. Spec. No.: Bd.L.9 Page No. 370 Providing neeru finish to plastered surfaces in a all positions including scaffolding and curing complete. Spec. No.: Bd.L. 10 Page No. 370 Providing flush grooved pointing with cement mortar 1:3 for _____________ including scaffolding and curing complete. Spec. No.: Bd.L.15 Page No. 372 a) brick work b) stone masonry work Providing tuck pointing with cement mortar 1:3 for stone masonry including scaffolding and curing complete. Spec. No.: Bd.L.16 Page No. 373 Providing weathered pointing with cement mortar 1:3 for stone masonry including scaffolding and curing complete. Spec. No.: Bd. L. 17 Page No. 373 Providing vee pointing with cement mortar 1:3 for stone masonry including scaffolding and curing complete. Spec. No.: Bd. L. 18 Page No. 373

Unit Sq.Mt.

Rate for 2012-2013 (in Rs.) Completed Labour 320.00 180.00

7 Bd-L 9

Sq.Mt.

330.00

180.00

8 Bd-L 10

Sq.Mt.

23.00

19.00

9 Bd-L 15A

Sq.Mt. Sq.Mt. Sq.Mt.

78.00 85.00 85.00

60.00 60.00 60.00

10 Bd-L 16

11 Bd-L 17

Sq.Mt.

82.00

59.00

12 Bd-L 18

Sq.Mt.

77.00

60.00

38

Sr. No. & Item Code 13 Bd-L

DESCRIPTION OF ITEMS Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. Spec. No.: As directed by Engineer in charge. Labour charges for providing groove in external plaster having width of 2.5 c.m. and spaced at a distance of 45 c.m. etc. complete. Spec. No.: As directed by Engineer in charge. Providing patti on plastered surface 12 mm to 15 mm thick in c.m. 1:3 line and level including neet finishing scaffolding curing etc. complete. a) 75 mm b) 100 mm c) 150 mm Spec. No.: As directed by Engineer in charge. Providing and fixing chicken mesh jali (24 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete. Spec. No.: As directed by Engineer in charge. Providing and applying plaster with plaster of paris in 6 mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. Spec. No.: As directed by Engineer in charge. Providing and applying spray plaster made with finely graded marble and quartz in 2 mm thickness in two coats using putty knife or trowel to newly plaster fairly even surface after minimum 30 days gap in all position including finishing the surface using zero number sand paper or fine emry paper gently level the area by moving paper in round circles removing the dust and clean the surface with dry cloth and scaffolding including all materials and labour etc. complete. Spec. No.: As directed by Engineer in charge.

Unit Sq.Mt.

Rate for 2012-2013 (in Rs.) Completed Labour 46.00 30.00

14 Bd-L

R.Mt.

19.00

19.00

15 Bd-L

R.Mt. R.Mt. R.Mt.

17.00 25.00 36.00

11.00 17.00 23.00

16 Bd-L

Sq.Mt.

61.00

18.00

17 Bd-L

Sq.Mt.

53.00

29.00

18 Bd-L

Sq.Mt.

159.00

23.00

39

Sr. No. & Item Code 19 Bd-L

DESCRIPTION OF ITEMS Providing and applying laying Aggregate plaster in granite/marble stones, as decorative finish to give granite/marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12 milimeter thick with cement mortar 1:3 with 2% integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement of slurry mixing one part of white cement and two parts of course calcite powder, applying the mortar with steel foat on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish the applying a coat of white cement and lime to get a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete. Spec. No.: As directed by Engineer in charge. Providing and applying plaster / wall punning with plaster of paris (with plaster of paris material of Ambuja / Mor Chap or equivalant make) in 10 to 13 milimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. Spec. No.: As directed by Engineer in charge. Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalant make ) with finishing with gypsum material in 10 to 13 milimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. Spec. No.: As directed by Engineer in charge.

Unit Sq.Mt.

Rate for 2012-2013 (in Rs.) Completed Labour 1,001.00 234.00

20 Bd-L

Sq.Mt.

305.00

155.00

21 Bd-L

Sq.Mt.

345.00

155.00

40

Sr. No. & Item Code 22 Bd-L

DESCRIPTION OF ITEMS Providing and applying Texture plaster with finishing with With Purlina / Rustic texture material (with texture material of Asian / Renava/Nitco/Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface ,including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface scaffolding etc.complete. (Excluding Texture Paint and Texture Paint Finishing) Spec. No.: As directed by Engineer in charge. Note : For Item No. 18 to 22 prior approval of Superintending Engineer will be necesary.

Unit Sq.Mt.

Rate for 2012-2013 (in Rs.) Completed Labour 450.00 180.00

41