Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 456 views

    Ross-Tech VAG-COM USB Cable Instructions (For Audi Auto Computers)

    Uploaded by

    urcanfleur
    This document provides information about a USB cable that is compatible with VAG-COM diagnostic software for Volkswagen, Audi, SEAT, and Skoda vehicles. It discusses compatible vehicle models, software, driver installation instructions, determining the correct COM port setting, testing the connection, and troubleshooting tips.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Ross-Tech VAG-COM USB Cable Instructions (For Audi Auto Computers)

    Uploaded by

    urcanfleur
    456 views3 pages
    This document provides information about a USB cable that is compatible with VAG-COM diagnostic software for Volkswagen, Audi, SEAT, and Skoda vehicles. It discusses compatible vehicle models, software, driver installation instructions, determining the correct COM port setting, testing the connection, and troubleshooting tips.

    Original Description:

    Ross-Tech VAG-COM USB Cable Instructions (for Audi auto computers)

    Original Title

    Ross-Tech VAG-COM USB Cable Instructions (for Audi auto computers)

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about a USB cable that is compatible with VAG-COM diagnostic software for Volkswagen, Audi, SEAT, and Skoda vehicles. It discusses compatible vehicle models, software, driver installation instructions, determining the correct COM port setting, testing the connection, and troubleshooting tips.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    456 views3 pages

    Ross-Tech VAG-COM USB Cable Instructions (For Audi Auto Computers)

    Uploaded by

    urcanfleur
    This document provides information about a USB cable that is compatible with VAG-COM diagnostic software for Volkswagen, Audi, SEAT, and Skoda vehicles. It discusses compatible vehicle models, software, driver installation instructions, determining the correct COM port setting, testing the connection, and troubleshooting tips.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3
    At a glance
    Powered by AI
    The document discusses VAG-COM compatible cables and software that can be used for diagnostic and tuning of Volkswagen, Audi, Skoda and SEAT vehicles.

    VAG-COM software is used for diagnostic and tuning of Volkswagen, Audi, Skoda and SEAT vehicles. It connects to the vehicle's onboard computer through an OBD-II port and cable to retrieve fault codes, live data and allows reprogramming of control modules.

    The steps outlined are to download and extract the driver files, determine the correct COM port, install the driver by running the install.exe file and going through the installation wizard, and testing the connection in the VAG-COM software.

    alpha-bid.com www.stores.ebay.com/alpha-bid sales@alpha-bid.

    com

    USB Vag-Com Compatible Cable


    Compatible Vehicles
    Works on OBD2 VW, Audi, Seat and Skoda vehicles. Does not work on CAN-BUS vehicles. Email sales@alpha-bid.com for information on CAN-BUS compatible cables. Some US model VW/Audi Application Charts: www.ross-tech.com/vag-com/cars/applications/index.html

    Compatible Software
    uVag-Com from www.ross-tech.com (*See installation instructions below). uRevo Technik (www.revotechnik.com). u"VW-Tools" from Euroscan (www.euroscan.hu/vwt_demo.html) u"Vehikel Erkunder. (www.obd-2.de/downve.html) uGIAC Mobile Tuner". (Www.giacusa.com)

    Vag-Com Software Installation


    Free Vag-Com Software: http://www.ross-tech.com/vag-com/download/archives.html uSelect Release 409.1, For the Twin-USB Interface. uDo not use USB driver instructions on that page. Install our driver below. uNote: the Vag-Com User Manual is at the bottom of the web page. Optional Full Featured Version: http://www.rosstech.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=VSWR&Category_Code=VAGCOM uThis is available to purchase direct from www.ross-tech.com for $99.

    Driver Installation
    Note: These instructions are for Windows XP (recommended). Installation under Windows 98/ME/2000/Vista/Windows 7 is similar, but not necessarily identical. Windows Vista & Windows 7. Use these suggestions: uSet the vag-com shortcut to run in win xp compatability mode. uRight click the VAG-COM icon and click properties, then the shortcut tab. Select 'advanced' then select 'Run as administrator Download the Driver Files here: http://www.alpha-bid.com/media/Product-Pics/VAG-USB/UsbVagComDriver.rar uIf your version of windows does not unzip the driver, it does not support the .rar format. Enable the .rar format by clicking here: http://www.alpha-bid.com/media/Shared-Pics/Winrar3.5.exe uIt is recommended that you save it in its own folder on your computer for future use. uRun the file called Install.exe in the USB Vag-com folder. uWhen prompted, plug the cable into a USB port on your computer. uThe Found New Hardware Wizard will start and ask Can Windows connect to Windows Update to search for the software?. Select Yes. uThen select Install the software automatically. uAfter the install, select Finish uThe Found New Hardware Wizard will start once again as there are 2 drivers for this cable. uGo through the same steps as above to install this driver. *Alternate Driver: If you have trouble, try these drivers: www.ftdichip.com/FTDrivers.htm

    Determine the correct Port setting


    Open the Device Manager and determine which COM Port number the cable is using. This is the COM Port number you will use when you perform the Test in the Vag-Com software: uPlug the Vag-Com Cable into an available USB port on your computer. uNow open the Device Manager by opening the Control Panel, click the System icon, click the Hardware tab, click Device Manager. uIn the Console Tree, double click Ports (COM & LPT) uVerify that the device USB Serial Port has its own COM Number and that this number is not in use by another device. If you need to change it, double click the device, click the Port Settings tab, click Advanced, then change the COM Port Number. uMake a note of the COM Port number which you will use when you perform the Test in the Vag-Com software.

    Test the COM Port with the Vag-Com Software


    uPlug the cable into the computer and into your vehicles socket. Turn the ignition on. uStart the VAG-COM software. uClick the Options button. uIn the Select COM Port box, select the COM Port number that the device uses as displayed in the Device Manager. *The USB option is only available for Ross-Tech made USB Cables. uClick the Test button. It should display Interface Status: Found!. If this test is not successful check the following: uOther software or devices using USB ports or the that same COM Port could be conflicting. To troubleshoot, uninstall the suspected software or device. uIt will not work on vehicles running on the CAN-BUS System. uThe cable must be plugged into the vehicle with the ignition on. uTry testing the cable with each COM Port from 1-4 in Windows Device Manager. uCheck that the driver is installed and configured as outlined above.

    Troubleshooting *Solutions to the most common problems.


    uFirst, make sure all directions above for installing driver files and configuring the COM Port where performed. uMake sure your using software Version 311.2 or 409.1 from http://www.ross-tech.com/vagcom/download/archives.html. Install For the Twin-USB Interface uMake sure your using the item on a VW, Audi, Skoda or Seat vehicle. uService Pack 1 for Windows 2000 adversely affects VAG-COM's ability to do real-time and makes communications with some controllers unreliable. If using Windows 2000 with Service Pack 1, you should apply Service Pack 2 or Service Pack 3. uIf when you try to connect to a control module, it won't connect or you get the error message Can't Synch Baud Rate, go to the Options Screen and try setting the Start Baud to 9600. If 9600 doesn't work, also try 4800 and 1200. Turn the car's ignition OFF and back ON after each failed attempt to connect! Also verify that the controller exists on the vehicle. uIf you have installed the Vag-Com Software more than once or installed a different version without uninstalling the previous, it could conflict. The best way to eliminate this is to uninstall all Vag-Com Software, preferably with an uninstall program such as Norton. Then re-install the software. uAs a last resort, this solution has been known to get it working; remove and uninstall all unnecessary devices and hardware from the PC. Eg-modems, printers or other USB devices. Uninstall all Vag-Com software as well. Re-install the Vag-Com software and cable drivers. This will determine if there is a device that is conflicting with the Vag-Com software. uRoss-tech has further info and troubleshooting: Common Diagnostic Procedures: http://www.ross-tech.com/vag-com/cars/index.html Other known issues: http://www.ross-tech.com/vag-com/issues.html

    You might also like