Vatech SB6-2Y

Transmission & Distribution
SB6-2Y - 245-420 kV - SF6 circuit-breaker
SB6-2Y
SF6 circuit breaker with gas-dynamic and closed cycle operating mechanism and twin breaking chambers
Simplicity
c Easy coupling at site between twin interrupting chambers assembly and column without opening or mechanical adjustments. c Only electric plug-in connectors from operating mechanisms.
Reliability
c Protected operating mechanism. c Only static SF6-air seals. c 40 years experience since the installation of the first puffer-type circuit breaker.
Safety
c All moving parts housed.
A design combining simplicity, reliability and safety

c Only one technic provides insulation, contact interruption and current interruption. c The breaking chambers and the operating mechanism are totally enclosed, assembled and factory tested, for an optimised maintenance. c Static interfaces between SF6 and atmosphere : no dynamic revolving and sliding joints. Routine maintenance is unnecessary and environment is protected. c Safety is improved as there are no accessible moving parts. c No mechanical assembly on site related to the operating mechanism ( no pipes, no ganging, no setting).
Application
c Step-up and transmission AIS substations c Line, power transformer, reactor and capacitor switch. c Standards: IEC 62271-100 and CEI 17-1.
Gas dynamic operating mechanism

The energy for actuating the main contacts is provided by SF6 pressure gas differential between: the volume formed by the interrupting chamber and the insulation column, the volume of the operating mechanism enclosure. Opening Figure 1 : The interrupting mechanism (1) is under rated SF6 gas pressure for insulation and interruption. The mechanism (2) is low pressure rated. Figure 2 : On control signal, the valve group (3) directs the gas in front of the piston (4) to open the contact. At the end of the operation the driving gas inside the cylinder is released to expansion volume.
1
Closing Figure 3 : A sealed compressor (5) situated in the expansion enclosure (2) restores the pressure in the upper chamber. Figure 4 : On control signal, the valve group (3) directs the gas behind the piston (4) which closes the contact. At the end of the operation the driving gas inside the cylinder is released to expansion volume. Figure 5 : The sealed compressor (5) restores the pressure in the upper chamber.
4 4 3 3
19 18 17 1 2 Legenda 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. HV terminal plate Fixed arcing contact Nozzle Moving main contact Upper porcelain insulator Insulating rod Opening valve group Closing valve group Auxiliary contacts SF6 gas filling valve Plug-in auxiliary connector Compressor Leaf-spring toggle device Double effect piston Lower porcelain insulator Gas filter Moving arcing contact Fixed main contact 9 12 10 11 8 13 14 7 6 15 16 3 4 5
19. Molecular sieve Note : The pole is normally provided with a grading capacitor in parallel to each chamber.
Main characteristics
Rated voltage Interrupting chamber (each pole) Type Insulation level kV rms power frequency - 1 min kV p 1,2/50 s kV p 250/2500 s Rated frequency Rated current Symmetrical breaking capacity Making capacity Short time current Rated duty cycle Rated break time Rated closing time Minimum creepage distance to earth Service conditions C - 25 to + 55 ms ms mm/kV (A) kA rms kA p kA rms/s 245 SB6-2Y 460 1050 300 SB6-2Y 380 1050 850 50 - 60 Hz 2000 - 3150 up to 50 up to 125 (50 Hz) - 130 (60 Hz) up to 50/up to 3 O-0,3 s-CO-3 min-CO or O-0,3 s-CO-1 min-CO or CO-15 s-CO <50 70 according to pollution level of IEC 60815 362 SB6-2Y 450 1175 950 420 SB6-2Y 520 1425 1175 kV rms 245 2 300 2 362 2 420 2
Other characteristics
D L
Type Operating mechanism : Gas dynamic
245 300 362 420
Approximate dimensions (mm) H (height) L (width) (3 poles) D (depth) Approximate weight (kg) for 3-poles complete CB 3500 3500 4000 5000 6500 6500 7600 8300 9000 9000 13000 14000 3100 3100 3700 4200
H
Installation and set-up

c Extremely simple civil works. c Easy erection: plug and bolt together the transport unit, pole by pole (twin chambers assembly and column + mechanism assembly). c No adjustments or dismantling or reassembling required. c After completing the SF6 filling, the only function to perform is the connection of the prefabricated electrical cables between each pole and the local control cubicle. c Time to complete the installation is about a day.
What to check during the service life of the circuit-breaker

c Only routine visual inspections. c No greasing needed. c Internal inspection on the pole after: v 20 years of service or, v minimum 2000 interruptions at rated current or, v cumulative 800 kA at full breaking capacity. c mechanical endurance 10 000 CO.
Industrial process - Quality

c The factory is certified to ISO 9001 standards. c FMECA method is used for design and choice of industrial process. c On line tests are integrated throughout the circuit-breaker manufacturing process according to the established Quality Control Plan. c At the end of the manufacturing process, each pole undergoes complete routine test according to standards and/or customers requirement.
Operator and environmental safety

c There are no accessible moving mechanical parts. c The main contacts position indicator is connected directly to the insulating drive rod in each pole. c Impact of site works reduced to the minimum. c Control panel with IP20 protection degree (open door).
QU
AL I TY
c Very low noise during switching operations. c Leakage rate far less than 0.5% per year due to static seals only.
N
RT
I F I C AT I
RT
I F I C AT I
Design, data, dimensions are indicative and subject to change without notice
SHVED101109EN ART. 14822
VA TECH Transmission & Distribution GmbH & Co KEG Penzinger Strae 76, A-1141 Vienna Tel.: ++43/1/89 100, Fax: ++43/1/89 100-196 E-Mail: contact@vatech-td.at, www.vatech-td.com
VA TECH T&D Spain Calle Consejo de Ciento 304 2 2 08007 Barcelona Telf. +34 93 2724250 Fax + 34 93 2724251 E-mail: td@td.vatech.es
N
O
9001
NV
IRO NMEN
14001
CE
CE

Vatech SB6-2Y

Uploaded by

Copyright:

Available Formats

Vatech SB6-2Y

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Vatech SB6-2Y

Uploaded by

Copyright:

Available Formats

Transmission & Distribution

SB6-2Y - 245-420 kV - SF6 circuit-breaker

A design combining simplicity, reliability and safety

Gas dynamic operating mechanism

Type Operating mechanism : Gas dynamic

245 300 362 420

Installation and set-up

What to check during the service life of the circuit-breaker

Industrial process - Quality

Operator and environmental safety

SHVED101109EN ART. 14822

You might also like