Professional Documents
Culture Documents
Protection Relays Guide 2012-Schneider Electric
Protection Relays Guide 2012-Schneider Electric
2012
www.schneider-energy.pl
Function symbols in accordance with ANSI / IEEE Std C37.2 - 1996 Standards * - the symbol does not appear in the Standard
CONTENTS:
System Products. .............................................................................................................................4 Overcurrent Protections...............................................................................................................6 MV Bay Protections. ........................................................................................................................13 ...........................................................................................................................17 Motor Protections. Generator Protections...................................................................................................................21 Line Distance Protections. ............................................................................................................25 Line Differential Protections. .......................................................................................................30 Differential Protections for Transformers, Generators and Motors..............................33 Voltage Protections........................................................................................................................35 Busbar Protections.........................................................................................................................37 MV Changeover Automation.......................................................................................................39 Accessories........................................................................................................................................40 Services...............................................................................................................................................42 MV Network Automation / Easergy Range of Products. ....................................................43 ...........................................................45 Network Analysers / Metering and Control Devices. SEPAM Range of Protections. ......................................................................................................47 .................................................49 Product Catalogue (DVD) / MiCOM S1 Studio Software. Product Tables. .................................................................................................................................50 Contact Details / Service Info-Line
PACiS
Protection, Automation & Control integrated Solution CONTROL AND SUPERVISION SYSTEM FOR ELECTRICAL POWER SUBSTATIONS
Signalling and remote control Execution of substation schemes Measurement processing Distributed Architecture Flexible topology IEC61850 100MBit/s STP6 system bus or optical fibre, Client-Server relation, GOOSE events, integration of equipment produced by various manufacturers Conversion of data format between a digital device and SCADA Possibility to test equipment operations by means of software simulators Diverse interfaces of data transmissions Control and supervision over all types of substations
MODULAR SUBSTATION COMPUTER AND SYSTEM BAY MODULE, COMMUNICATION CONCENTRATOR, PROTOCOL CONVERTER Control and signalling circuits Possibility to count impulses on inputs Direct inputs for CTs and VTs Transducer measurements 0 - 20 mA Configurable schemes in accordance with IEC 61131-3 standard, switchgear interlocking Integrated schemes of synchro-check and transformer voltage regulator Record of up to 2000 events Routing of: Modbus, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, DNP 3.0, UCA-2, IEC 61850 protocols Electrical and optical interfaces Used as a stand-alone device or as a part of PACiS system Co-operation with external SCADA systems (WindEX, SYNDIS, DYSTER, PRINCE etc.) Capacity to perform basic protection functions Analogue outputs Application Bay unit with synchro-check Transformer voltage regulator Protocol concentrator (gateway) Back-up protection Modular substation computer - execution of control sequences, regulator schemes, interbay interlocks Mini HMI - visualisation of a substation layout on a LCD display Various combinations of the above
PACiS Gateway
ACCESS GATEWAY
Application Interface between PACiS system bus and a dispatching centre Protection and Logic Control Data acquisition, processing and transmission Self-diagnosis and monitoring of data transfers Communication in V.24 and 802.3 standards: Slave DNP3, Modbus RTU, IEC 60870-5-101, IEC 60870-5-104, GI74, OPC, Server/Client IEC61850
4 doubled communication ports Time synchronisation Possibility of parallel operations (redundancy) Supervision of modes: remote/local, maintenance Computer without rotating components, power supply within thresholds of safe voltage Windows Embedded software
Application Phase and earth fault overcurrent protections applicable in HV and MV substations and to protect MV and LV transformers Protections P120: Single-phase or earth fault overcurrent, 3-stage DT or IDMT, co-operation with core balanced CT or in Holmgreen arrangement P121: 3-phase overcurrent, phase-to-phase, 3-stage, DT or IDMT Earth fault, 3-stage DT or IDMT, co-operation with core balanced CT or in Holmgreen arrangement
Measurements Phase currents Earth current Other Functions 2 setting group Circuit breaker control CB status monitoring Protection blocking logic Output contact latching Programmable binary inputs, outputs relays and LEDs, 2 inputs / 4 outputs Communication in RS485/RS232 standard Transmission protocols: Courier, Modbus, IEC60870-5-103 and DNP 3.0 Recording of: Events - 250 Faults - 25 (1600 Hz, 3s window) Triggers - 25 Trips - 5 (display)
OVERCURRENT PROTECTION RELAY (3-phase) Functions: 50/51, 50N/51N, 37, 49, 46, 46BC, 50BF, 79, 74TCS, 50HS Application Phase and earth fault overcurrent protections applicable in HV and MV substations and to protect MV and LV transformers Protections 3-phase overcurrent, phase-to-phase, 3-stage, DT or IDMT Earth fault, 3-stage, DT or IDMT Thermal overload with 1 thermal time constant Undercurrent, single stage Negative phase sequence overcurrent, IDMT and DT Measurements Phase currents Earth current Thermal state Other Functions 2 setting group Circuit breaker control CB status monitoring Protection blocking logic Output contact latching Programmable binary inputs, outputs relays and LEDs: P122 3 inputs / 6 outputs P123 5 inputs / 8 outputs Communication in RS485/RS232 standard Transmission protocols: Courier, Modbus, IEC60870-5-103 and DNP 3.0 Recording of: Events - 250 Faults - 25 (1600 Hz, 3s window) Triggers - 25 Trips - 5 (display)
MiCOM P122C
COMPACT OVERCURRENT PROTECTION RELAY Functions: 50/51, 50N/51N, 37, 49, 46, 46BC, 50BF, 79, 74TCS, 50HS, CTS
Application Utilities Industrial electrical networks HV and MV substations MV and LV transformers Protection and Logic Control 3 independent non-directional phase and earth overcurrent thresholds DT and IDMT curves Thermal overload Unbalance / Loss of phase Loss of load Output contacts latching Broken conductor detection
Circuit breaker failure detection Blocking logic for reverse interlocking Circuit breaker status monitoring Trip circuit supervision Switch on to fault Cold load pick-up Output contacts testing mode
Measurements & Recording IA, IB, IC, IN, Is1, Is2, Is2/Is1, f, Rolling and peak phase current values Recording of events, disturbances and fault parameters Documents Catalogue card User manual
MiCOM P116
OVERCURRENT PROTECTION RELAY DUAL-POWERED WITH CTs / AUXILIARY SUPPLY VOLTAGE Functions: 50/51, 50N/51N, 37, 49, 46, 46BC, 50BF, 79, 74TCS Application Phase and earth fault dual-powered overcurrent protection applicable in HV and MV substations and to protect MV and LV transformers Applicable in systems where auxiliary supply voltage may be interrupted or lost Protections Overcurrent, against phase-to-phase faults, 3-stage, DT or IDMT Earth fault, 3-stage, DT or IDMT Thermal overload with 1 thermal time constant Undercurrent, single stage Negative phase sequence overcurrent, IDMT and DT Measurements Phase currents Earth current Other Functions Autonomous operation: dual-powered supply from current circuits or/and auxiliary voltage 4-pole multishot autoreclose 2 setting groups Circuit breaker diagnosing Circuit breaker control Circuit breaker state monitoring Circuit breaker failure detection with undercurrent criterion Broken conductor detection Cold load pick-up logic Protection blocking logic Auxiliary output latching 5 x electromagnetic flag indicator Tripping the circuit breaker at a loss of auxiliary supply voltage by means of: an internal energy tripping output, cooperating with the sensitive voltage coil of the circuit breaker (CB ordering option): 24VDC or 12VDC MiCOM E124 - an external microprocessor capacitor unit designed for cooperation with traditional CB trip coils Programmable digital inputs, output relays and LEDs, 6 inputs / 7 outputs Communication standards: USB, RS485 Transmission protocols: Modbus, IEC60870-5-103 Recording of: Events - 200 Faults 20 Disturbance dynamic (1600 Hz, 7 s)
MiCOM P115
AUTONOMOUS OVERCURRENT PROTECTION RELAY Functions: 50/51, 50N/51N, 37, 49, 46, 46BC, 50BF, 79, 74TCS Application Phase and earth fault dual-powered overcurrent protection applicable in MV substations Applicable in systems where auxiliary supply voltage may be interrupted or lost Auxiliary protection of HV/MV transformers Interaction with Circuit Breaker Tripping a CB when powered by current transformers only, achieved by: cooperation with a current coil of the circuit breaker, an optional piece of equipment for modern CBs, an energy output in P115 (24VDC 0,1J) to trigger a highly sensitive trip coil, an optional piece of equipment for modern CBs, cooperation with E124 capacitor trip unit, being a separate product by Schneider Electric (an application for CBs of older types), an energy output in P115 (12VDC 0,02mJ) to trigger an external striker coil (Striker K1 type - mechanical coupling with the CB), being a separate product by Schneider Electric (an application for CBs of older types). Protections Overcurrent, against phase-to-phase faults, 2-stage, DT or IDMT Earth fault, 2-stage, DT or IDMT Overcurrent, against asymmetry, IDMT Auxiliary (AUX1 and AUX2), IDMT Measurements Measurements accessible via communication link (no display): Phase currents Earth current Other Functions Autonomous operation: dual-powered supply from current circuits or/and Vx auxiliary voltage 2 setting groups Circuit breaker failure detection (undercurrent criterion) Circuit breaker control from P115 front panel or/and via RS485 Circuit breaker state monitoring Protection blocking logic from binary inputs (decentralised bus bar protection) Programmable digital inputs (2 inputs), output relays (up to 4 outputs) and LEDs (6 LCDs) Communication standards: USB (local), RS 485 (remote) Transmission protocols: Modbus, IEC60870-5-103 Special current output for CB tripping coil Recording of: Events - 200 with time stamping Faults - 20
MiCOM P114D
AUTONOMOUS OVERCURRENT PROTECTION RELAY Functions: 50/51, 50N/51N Application Phase and earth fault dual-powered overcurrent protection applicable in MV substations Applicable in systems where auxiliary supply voltage may be interrupted or lost Auxiliary protection of HV/MV transformers Interaction with Circuit Breaker Tripping a CB when powered by current transformers only, achieved by: cooperation with a current coil of the circuit breaker, an optional piece of equipment for modern CBs, an energy output in P114D (24VDC 0,1J) to trigger a highly sensitive trip coil, an optional piece of equipment for modern CBs, cooperation with E124 capacitor trip unit, being a separate product by Schneider Electric (an application for CBs of older types), an energy output in P114D (12VDC 0,02mJ) to trigger an external striker coil (Striker K1 type - mechanical coupling with the CB), being a separate product by Schneider Electric (an application for CBs of older types). Protections Overcurrent, against phase-to-phase faults, 2-stage, DT or IDMT Earth fault, 2-stage, DT or IDMT Measurements Measurements accessible via communication link (no display): Phase currents Earth current Other Functions Autonomous operation: dual-powered supply from current circuits or/and Vx auxiliary voltage Protection criteria set with DIP-switches I/O configuration with DIP-switch or MiCOM S1 software Circuit breaker control via RS485 Circuit breaker state monitoring Protection blocking logic from binary inputs (decentralised bus bar protection) Programmable digital inputs (2 inputs) and output relays (up to 4 outputs) Communication standards: USB (local), RS 485 (remote) Transmission protocols: Modbus, IEC60870-5-103 Special current output to the CB tripping coil Recording of: Events - 200 with time stamping via USB Faults 20 via USB
10
MiCOM P125
DIRECTIONAL EARTH FAULT PROTECTION RELAY Functions: 50N/51N, 67N, 32N, 59N Application Phase and earth overcurrent protection applicable in MV and HV stations and to protect LV and MV transformers Protections Earth fault, 3-stage, DT or IDMT Earth fault, 2-stage (for Petersen coil earthed system) Residual overvoltage Measurements Earth current Residual voltage
Other Functions Circuit breaker control Protection blocking logic Auxiliary output latching Programmable digital inputs, output relays and LEDs, 4 inputs, 6 outputs Communication standards: RS232, RS485 Transmission protocols: Modbus, Courier, IEC60870-5-103, DNP 3.0
MULTIFUNCTION DIRECTIONAL LINE PROTECTION RELAY Functions: 50/51, 50N/51N, 67, 67N, 37, 49, 46, 46BC, 50BF, 79, 32N, 27, 59, 59N, 74TCS, 81, 81R, 32F, 51V, VTS Application Universal 3-phase directional overcurrent protection, applicable in MV substations for both incoming and outgoing feeders, as well as auxiliary protection for HV Protections Overcurrent, against phase-to-phase faults, 3-stage, DT or IDMT (P127 - directional) Earth fault, directional, 5-stage, DT or IDMT ( 3 measured and 2 derived ) Wattmetric earth fault, 2-stage (for Petersen coil earthed system) Undercurrent - single stage Residual overvoltage (P127) Negative phase sequence overcurrent, IDMT and DT Thermal overload with 1 thermal time constant Undervoltage, 2 thresholds (P127) Overvoltage, 2 thresholds (P127) Under- and overfrequency (P127) Power directional (P127) Frequency rate of chance (P127) Measurements Currents and voltages Current and voltage sequences Peak, average and rolling demand Thermal state in % THD i TDD for measure CTs Other Functions Four-shot autoreclose 8 setting groups Switchgear monitoring Remote and local CB control CB state monitoring CB failure protection Broken conductor detection Cold load pick-up logic Second harmonic blocking Protection blocking logic Selective logic Output relay testing Output contacts latching Programmable binary inputs and outputs: 7 x I / 8 x O extra 5 opto-insulated inputs - option Extensive logic equations: 8 equations with 16 operators each, of AND, OR, AN NOT, OR NOT types Measuring transformers, 0.5 class - option Another RS485 port with Modbus protocol option Time synchronisation via IRIG-B - option Communication standards RS232 (local) and RS485 (system) Transmission protocols: Modbus, IEC60870-5103 and DNP3.0 Recording of: Events - 250 Faults - 25 (1600 Hz, window 3 s) Triggers - 25
11
MiCOM P111
Application Thanks to its favourable price vs technical features ratio, P111 may be used both in medium voltage and in low voltage applications (specifically where communication facilities are required). Detailed technical specifications and setting procedures for P111 are included in the products user manual. The P111 series includes the following models: A, B, E, D, G, H, R. Their features are enumerated in the Table below.
Features Operation in 1, 2, or 3-phase arrangement in various types of networks True RMS phase current value measurement within a frequency range from 10Hz to 250Hz Protections (see the Table below) Possibility to configure protections: trip or signal RS485 communication facility via Modbus RTU protocol (option) Local or remote control of a contactor or circuit breaker Independent programmable output relays (2 in basic version + optionally 2 extra) Programmable NO output relays (P2, P3) Programmable binary inputs (S1-S2 and T1-T2 in basic version + optionally V1-C, V2-C, V3-C, V4-C LEDs to indicate protection triggering or tripping 4-digit LED display 5-button keypad to input settings and to configure protections 2 types of case: flush or 35 mm DIN rail mounted (R model is available in the flush version only)
12
MiCOM P111Enh Numerical three phase and earth fault overcurrent relays
MiCOM P111Enh relays provide features for easy adaptation to different applications and operation conditions. The P111Enh can be fully configured manually, without using setting software. Alternatively, MiCOM S1 Studio setting software allows configuration parameters to be modified for a specific application via the USB port. IEC 60870-5-103 and Modbus RTU integrated communication protocols are available for flexible integration into most substation control or DCS systems. Close and Trip commands can be executed via functional key on the front panel, default menu window, DCS/SCADA system (RS485) or configured binary input. Three level password gives proper rights for secure maintenance of the relay. As a device housed in a small sized flush-mountable case, the P111Enh can be easily installed in all modern, dimension-focused switchgear panels. The relay can be also considered as a costeffective answer to retrofit demands of older substations. Selectable measuring criteria: True RMS and/or fundamental frequency (Fourier) current measurements allow to increase selectivity and adapt to the application. tage electrical systems as an optimized and cost efficient solution tailored to users needs. The MiCOM P111Enh numerical overcurrent protection relays provide an optimized and cost efficient solution. Typical applications are: Utility and industrial substation fitted with costoptimized MV switchboards Retrofit relays of old technology, particularly during installation of DCS systems Transformers, incomers, bus couplers, capacitor banks, overhead lines and underground cables on MV systems Neutral system protection (insulated, solid and resistance earthed) LV substations
MiCOM P111Enh
Application The MiCOM P111Enh (Enhancement) relays are suitable for all the application where overcurrent and/or earth-fault protection are required. P111Enh can be applied to medium and low vol-
Main features The following functions are generally available in all devices (refer to Table 1 below): Operate in 1, 2, or 3-phase arrangement. Two setting groups, selected from the relay menu, binary input or SCADA/DCS. Flush mounted case. Fundamental (fn) and True RMS (within a frequency range from 10Hz to 1kHz) phase current value measurement. E arth current fundamental (fn) frequency measurement. 9 button keypad to input settings, configure the relay and close and trip command and display (2x16 LCD). F ault record for most recent trips.
13
MiCOM P132
TIME-OVERCURRENT PROTECTION RELAY Functions: 50/51, 50N/51N, 67, 67N, ADMIT, 37, 49, 46, 50BF, 79 (3), 32N, 27, 59, 47, 27D, 59N, 32R/32(F), 81O, 81U, 81R, 51V, 26/38 (R), 48, 50S/51LR, 66, 74TCS Application Phase and earth overcurrent protections applicable in MV and HV substations for both incoming and outgoing feeders and transformer applications Auxiliary earth fault directional protection for HV lines Protections Overcurrent protection: DT, three-stage, separate circuits for phase and residual currents, IDMT, separate circuits for phase and residual currents Thermal overload protection (thermal image) Motor protection Unbalance protection (negative sequence current) Under- and overvoltage Short-circuit direction determination Ground fault direction determination - wattmetric and admittance Frequency: f, df/dt, f/t Control Functions Control and supervision of 3 switches 6 configurable buttons Monitoring of extra signals and measurements Interlocking logic Over 80 pre-defined bay types Measurements Phase currents Earth current Phase and phase-to-phase voltages Power P, Q Energy: active, reactive Other Functions Auto-reclosing control Circuit breaker failure detection Switch on to fault protection Limit values monitoring Interlocking 4 setting groups Measuring circuit monitoring (voltage and current) Cold load pick-up logic Programmable scheme logic Freely configurable inputs / outputs / LEDs max 16 x I / 30 x O 3 communication ports (optional) Communication protocols: IEC60870-103 / -101 / Modbus / DNP 3.0 / IEC61850 (KEMA certified) Recording of: Faults 8x200 events Overload loads 8x200 events Ground faults 8x200 events Disturbances 8 waveforms (1kHz) Circuit breaker monitoring
Case 40TE
Case 24TE
REMARK: Voltage -dependent functions (U>, U<, f<, f>, directionality for I> and IN> ...) are available for a version with measuring voltage inputs
14
MiCOM P139
FEEDER MANAGEMENT AND BAY CONTROL Functions: 50/51, 50N/51N, 50BF, 67, 67N, ADMIT, 37, 49, 79 (3), 32N, 27, 59, 47, 27D, 59N, 32R/32F (F), 81O, 81U, 81R, 51V, 26/38 (R), 48, 50S/51LR, 66, 25, 74TCS Application One-box solution in MV and HV systems - a main element of dissipated change-over automatics Protections Short-circuit directional against phase-to-phase faults, overcurrent, 3-stage DT and 1-stage IDMT Earth fault, directional Under- and overfrequency f, df/dt, f/t Directional power motor protection with true RMS value measurement Unbalance, checking of negative sequence current Thermal overload with 1 thermal time constant Motor protection features (excessive start time, limitation of number of starts etc.) Admittance earth fault Under- and overvoltage Switch onto fault protection Synchro-check (option) Control Functions Control of 6 switches Monitoring of 10 switches Monitoring of extra signals and measurements Mimic diagram Interlocking logic More than 290 pre-defined bay types Measurements Phase currents Earth current Voltages Power P, Q, S Energy: active, reactive Thermal load Other Functions Autoreclose scheme 4 setting groups CB failure scheme Programmable inputs/outputs /LEDs max. 70 x I / 23 x O or 3 communication ports (option) Communication protocols: IEC 60870-103 / -101 / Modbus / DNP 3.0 / IEC 61850 (KEMA certified) Recording of: Faults 8 x 200 events Overload faults 8 x 200 events Ground faults 8 x 200 events Disturbances 8 waveforms (1kHz) Circuit breaker monitoring
REMARK: Voltage -dependent functions (U>, U<, f<, f>, directionality for I> and IN> ...) are available for a version with measuring voltage inputs
15
FEEDER MANAGEMENT RELAY Functions: 50/51, 50N/51N, 67, 67N, ADMIT, 49, 46, 46BC, 50BF, 79, 32N, 27, 59, 47, 81O, 81U, 81R, 51V, 64N/87N, 25, 60/VTS
Application Phase and earth overcurrent protections applicable in MV and HV substations for both incoming and outgoing feeders and transformer applications Protections Overcurrent, directional against phase-to-phase faults, 4-stage, DT or IDMT Earth fault, two directional overcurrent characteristics, DT or IDMT Admittance earth fault Restricted earth fault (co-operation with transformer) Wattmetric earth fault (for Petersen Coil earthed system) Residual overvoltage Negative sequence overvoltage Unbalance, directional; check of negative sequence current Thermal overload with 1 or 2 thermal time constants Two stage under- and overvoltage Two stage under- and overfrequency Measurements Phase currents Earth current Voltages Power P, Q, S Energy: active, reactive Thermal load
Other Functions Three-shot autoreclose P142 i P143 Synchro-check P143 4 setting groups Switchgear monitoring Trip statistics CB control CB failure protection Broken conductor detection Current and voltage circuits supervision Cold load pick-up logic Programmable inputs (256 AND/OR gates and timers), outputs and LEDs P141 and P142 8 x I / 7 x O P143 16 x I / 14 x O Communication standards: RS232, RS485 Transmission protocols: Courier, Modbus, IEC60870-5-103, DNP 3.0, IEC 61850 (KEMA certified) Recording of: Events 512 Faults 20 (window 10.5 s) Quick access HOTKEY key
16
MiCOM P145
FEEDER MANAGEMENT RELAY WITH CONTROL FUNCTIONS Functions: 50/51/67, 50N/51N/67N, YN/ADMIT, 49, 46, 46BC, 50BF, 32N, 27, 59, 59N, 74CTS, 81U/O, 81R, 32F, 51V, 64N/87N, VTS/CTS, 79, 25 Application MV overhead or cable lines Auxiliary earth fault directional protection for HV lines HV / MV transformer overcurrent protection Protections Overcurrent, directional against phase-to-phase faults, 4-stage, DT or IDMT Earth fault, directional, 4-stages, DT or IDMT Sensitive earth fault in co-operation with core balanced CT, 4-stage Restricted earth fault (differential characteristic) Wattmetric earth fault (for Petersen coil earthed system) Residual overvoltage Negative sequence overvoltage Directional negative sequence overcurrent, 4-stage (Is2) Thermal overload Under- and overvoltage Under- and overfrequency Rate of change of frequency df/dt Admittance Yo/Go/Bo Other Functions Autoreclose scheme Two measuring inputs for Io Synchro-check, 2 stages 4 setting groups Switchgear monitoring CB control CB failure protection Broken conductor detection Cold load pick-up logic Testing functions (DDB signals) Measurement circuits supervision Quick access HOTKEY keys Tricolour LEDs Communication standards: RS232 and RS485 (standard), F/O (option) Second port for remote communication Optional protocols: Courier, Modbus,IEC60870-5-103, DNP3.0, IEC61850 (KEMA certified) Programmable operating scheme logic through PSL Editor: P145 - max 24 x I / 32 x O Recording of: Fault locator Events - 512 Faults - 15 Disturbances 20 (max window 10.5 s, COMTRADE format)
17
MiCOM P211
THREE-PHASE LV MOTOR PROTECTION RELAY Functions: 50/51, 50N/51N, 37, 49, 46, 26/38 (P), 48, 50S/51LR Application Comprehensive protection of LV motors. Replacement for RIz, RIzc, RIzx relays. Available models: A, B, C, U - see details in the catalogue card Protections Overload - thermal image: measurement of true RMS from 10 to 250Hz nominal motor current setting from 0.37 do 80A (direct wiring) time constants specified through tripping time setting at 6xIn current value Unbalance, loss of supply and loss-of-phase condition Excessive starting time Locked rotor Over temperature (with PTC sensors) Underload with time delay setting Short circuit Earth fault protection Self motor restart after a voltage loss on a substation busbar Limitation of the number of start-ups Measurements Phase currents Thermal load Earth current Other Functions Easy connection of motor feeders Pre-fault indication of overload Up to 4 programmable output relays Up to 4 programmable binary inputs RS 485 with Modbus RTU protocol
18
MiCOM P220
INTEGRATED PROTECTION & CONTROL SOLUTION FOR MOTOR MANAGEMENT Functions: 50/51, 50N/51N, 37, 49, 46, 26/38 (RP), 48, 50S/51LR, 66 Application Comprehensive protection of LV/MV motors Protections Thermal overload with thermal image (logarithmic characteristic). Configuration of 3 thermal time constants (starting, overload, cooling), 3 stages of thermal loading: alarm, trip and inhibition of CB closing. Three-phase overcurrent against phase-to-phase faults; 1-stage Earth fault, 2-stage. Co-operation with core balanced CT or three-phase CTs (Holmgreen arrangement). Excessive starting time. Overcurrent criteria. Detection of the motors starting on the basis of the starting current value or of a change in CB status Locked rotor while running or starting. Overcurrent criteria Unbalance, loss of phase and single phasing. 2-stage protection based on the negative sequence component of the current Loss of load. 1-stage. Undercurrent criteria. Deactivated during start-up Temperature supervision. Co-operation with 6 RTD sensors (Pt, Ni, Cu) or 2 thermistors. 2-stage settings for each channel. Limitation of the number of successive start-ups. Inhibition of CB closing after last unsuccessful start-up. Separate settings for cold and hot startups. Measurements Phase currents (up to 10th harmonic) Earth current Thermal load Temperature Other Functions 2 setting groups Switchgear monitoring Trip statistics Analogue output Emergency start-up CB control Programmable binary inputs, output relays and LEDs Communication standards: RS232, RS485 Transmission protocols: Courier, Modbus, IEC60870-5-103 Recording of: Events 75 Faults 5 (1600 Hz, window 3s) Starting current (40s)
19
MiCOM 225
INTEGRATED PROTECTION & CONTROL SOLUTION FOR MOTOR MANAGEMENT Functions: 50/51, 50N/51N, 37, 49, 46, 50BF, 27, 59, 26/38 (P), 48, 50S/51LR, 66, ABS, 74TCS Application Comprehensive MV motors protection with power and energy measurement Protections Thermal overload with thermal image. Configuration of 3 thermal time constants (starting, overload, cooling), 3 stages of thermal loading: alarm, trip and inhibition of CB closing Three-phase overcurrent against phase-to-phase faults, 1-stage Earth fault, 2-stage Excessive starting time. Overcurrent criteria Locked rotor while running or starting. Overcurrent criteria Unbalance, loss of phase and single phasing. 2-stage protection based on negative sequence component of the current Loss of load. 1-stage. Undercurrent criteria Temperature supervision. Co-operation with 10 RTD sensors (Pt, Ni, Cu) or 3 thermistors. 2-stage setting for each channel. Limitation of the number of successive start-ups. Separate settings for cold and hot start-ups. Inhibition of CB closing after last unsuccessful start-up. Separate settings for cold and hot start-ups Undervoltage Anti-backspin protection Measurements Phase currents (up to 10th harmonic) Earth current Voltages Power P, Q, S Energy: active, reactive Thermal load Temperature Other Functions CB failure 2 setting groups Switchgear monitoring Trip statistics 2 analogue output Emergency starting CB control Programmable inputs, outputs and LEDs Communication standards: RS232, RS485 Transmission protocols: Courier, Modbus, IEC60870-5-103 Recording of: Events 250 Fault 25 Disturbance 5 (1600 Hz, window 2.5s) Starting current (200s) Starting voltage (200s)
20
MiCOM P241 / MiCOM P242 / MiCOM P243 (with differential motor protection)
ASYNCHRONOUS & SYNCHRONOUS MOTOR MANAGEMENT RELAY Functions: 50/51, 50N/51N, 67N, 37, 49, 46, 50BF, 32N, 27 59, 59N, 32R/32F, 81U, 26/38, 48, 50S/51LR, 66, 55, 60/VTS, 87M, 40 Protections Motor differential (P243) Thermal overload with thermal image. 3 thermal time constants (starting, overload, cooling) Three-phase overcurrent against phase-to-phase faults, 2-stage Earth fault, directional, 2-stage, overcurrent, DT or IDMT Residual overvoltage Wattmetric earth fault (for Petersen coil earthed system) Excessive starting time. Overcurrent criteria Locked rotor while running or starting. Overcurrent criteria Unbalance, loss of phase and single phasing, 2-stage protection based on negative sequence component of the current Loss of load; 2-stage, underload criteria Temperature supervision. Co-operation with 10 RTD sensors (Pt, Ni, Cu); 2-stage setting for each channel Limitation of the number of successive start-ups. Separate settings for cold and hot start-ups. Inhibition of CB closing after last unsuccessful start-up. Separate settings for cold and hot start-ups Under- / overvoltage Anti-Backspin protection Out of step (monitoring of cos ) Reverse power Underfrequency Loss of field Measurements Phase currents (up to 10th harmonic) Earth current, voltages Power P, Q, S Energy: active, reactive Thermal load Temperature Other Functions 2 setting groups Switchgear monitoring Trip statistics Emergency starting CB control Programmable inputs (256 AND/OR gates and timers), output relays and LEDs 8 x I / 7 x O (P241) 16 x I / 14 x O (P242, P243) Communication standards: RS232/RS485 Transmission protocols: Courier, Modbus, IEC 60870-5-103, DNP3.0, IEC61850 (KEMA certified) Dual redundant Ethernet: RSTP, DHP, SHP Recording of: Events 512 Faults 20 (1200Hz, window 10.5s)
21
MiCOM P341
INTERCONNECTION PROTECTION FOR EMBEDDED GENERATOR Functions: 50/51, 50N/51N, 67, 67N, 49, 46, 50BF, 27, 59, 59N, 32R/32F, 32O, 32L, 81O, 81U, 81R, VVS, 64N/87N, 60/VTS, 25, DLR Application Small generators for LV and MV systems. Backup protection for bigger units Interconnection line Protections Rate of frequency change (df/dt) ROCOF Voltage vector shift monitoring Directional / non-directional phase overcurrent Directional / non-directional earth fault Sensitive directional / non-directional earth fault Neutral displacement / residual overvoltage Restricted earth fault Under- / overvoltage Under- / overfrequency Reverse load, overload, low forward load Check synchronism DLR Dynamic Line Rating Measurements Phase currents Phase and line voltage Sequence current and voltage, neutral current and voltage Power P, Q, S; energy Ec, Eb Peak, mean and rolling demand Single and three-phase power factor Other Functions 4 alternative setting groups Supervision of voltage and current transformer circuits Optional IRIG-B input for time stamp synchronisation Diagnostics and continuous self-monitoring CB status and condition monitoring Communication standards: RS232, RS485 Optional transmission protocols: Courier, Modbus, IEC60870-5-103, DNP3.0 IEC61850 (KEMA certified) Optional dual redundant Ethernet: RSTP, DHP, SHP Programmable scheme logic through PSL Editor (MiCOM S1) Programmable inputs (logic 256 AND/OR gates and timers, output relays and LEDs), 8 inputs / 7 outputs (standard) CLIO module Extra I/O cards option Recording of: Events 250 Faults 5 Disturbance waveforms 20 (window 10.5s each)
22
INTEGRATED NUMERICAL GENERATOR PROTECTION Functions: 50/51, 50N/51N, 67N, 49, 46, 50BF, 27, 59, 59N, 27TN/59TN, 87 (G/T), 32R/32F, 32O, 32L, 81O, 81U, 40, 24, 51V, 21, 64N/87N, 50/27, 78, 26/38, 60/VTS, 47, 81AB, 64S (100% - Gen), CLIO, 64R, 81R, 25 Application Medium and high power generators Unit protections for high-power turbine generators Protections for pumped-storage water power plants Protections Generator/Transformer differential - only P343/4/5 models Rotor earth fault protection (P391 auxiliary unit) Interturn protection 100% stator earth fault, 3 harmonic analysis only P343/4/5 models and 20Hz generator (P345) Non-directional phase overcurrent Non-directional earth fault Neutral displacement Sensitive directional earth fault Restricted earth fault Voltage dependent overcurrent or underimpedance Under- / overvoltage Under- / overfrequency Reverse power, low forward load and overload Loss of field Unbalance load Overfuxing Accidental energisation at standstill - only P343/4/5 models Resistance temperature devices 10 RTDs option CLIO analogue measurements Frequency rate of change Check synchronism Measurements Phase currents and voltages Sequence current and voltage, neutral current and voltage Differential and bias currents 3rd harmonic neutral voltage Power: P, Q, S; energies: Ec, Eb Temperature in C Other Functions Frequency tracking: from 5 Hz to 70 Hz Supervision of voltage and current transformer circuits Diagnostics and continuous self-monitoring Communication standards: RS232, RS485 Optional transmission protocols: Courier, Modbus, IEC60870-5-103, DNP 3.0, IEC61850 (KEMA certified) Dual redundant Ethernet: RSTP, DHP, SHP Programmable inputs (logic - 256 AND/OR gates and timers), output relays and LEDs P342 - 8 x I / 7 x O P343 - 16 x I / 14 x O P344 - 16 x I / 14 x O P345 - 24 x I / 24 x O Extra I/O card - option Recording of: Events 512 Faults 5 Disturbance waveforms 20 (max. window 10.5 s)
23
MX3EG1A
Application Frequency and voltage regulation of a generator, permit for execution of automatic paralleling with a live or dead busbar Transmitting control signal on turbine and generator operation (monitoring of paralleling conditions) CB circuit monitoring Configuring binary inputs to operate on receiving: synchronisation signals, paralleling requests (with live-bus Start_LB or Deadbus Start_DB), pause control, circuit breaker status, or other discrepancies Application of generator and busbar phaseto-phase voltage to 2 inputs Measurements Voltage and frequency on busbar side Voltage and frequency on generator side Phase displacement Primary voltage values
Other Functions 2 setting groups Testing functions: LEDs, output relays 5 binary inputs, 6 output relays (5 freely configurable to the device functions, 1 for relay diagnostics) 12 LEDs (8 freely configurable to perform protection functions) Countes for each tripping threshold Local communication via PC to the front serial port (with a EOC12 fibre-optic cable) Enclosure protection: IP52 for front panel (optional IP66) Remote communication to network: via rear serial port, with Lonwork (1.25 Mb/s) or MODBUS (RS485) Recording of: Events 32 status changes Faults 8 Disturbance waveforms: 1 (600 Hz, window 2.5s)
24
MX3PG2A
INTEGRATED NUMERICAL GENERATOR PROTECTION (ROTOR PROTECTION) Functions: 64R, 27DC, 59DC, 50/51 Application Rotor earth fault protection Protections Rotor earth fault detection based on injection of AC low voltage (50Hz) between rotor windings of the protected synchronous machine and ground Monitoring of the injected voltage 2 independent time thresholds to monitor the resistance of the earth fault Independent time overcurrent protections 2 independent time delayed DC undervoltage protections 2 independent time delayed DC overvoltage protections Measurements Injected voltage Circulating current Earth fault resistance DC voltage Other Functions Dedicated input for a wide range of DC voltage measurements Instantaneous or delayed signalling output (alarm) 2 setting groups to be selected from HMI, via digital input or communication port 3 binary inputs, 6 output relays 12 LEDs (8 freely configurable to perform protection functions) Remote communication to network: via rear serial port, with Lonwork (1.25 Mb/s) Alternative MODBUS protocol (RS485) Recording of: Events 32 status changes Faults 8 Disturbance waveforms - 1 Counters and LEDs
25
UNIVERSAL DISTANCE PROTECTION AND CONTROL UNIT (110 KV) Functions: 50/51, 50N/51N, 67N, 49, 50BF, 79, 27, 59, 59N, 32R/32F (F), 81O, 81U, 81R, 21, 78, 26/38 (R), 25, 74TCS Application HV line protection Protections Distance protection: circular or polygonal curve 6 distance stages 7 direction stages 8 timer stages start-ups: overcurrent, undervoltage and underimpedance directional voltage memory Time-overcurrent protection: backup (active when measuring circuit failure is detected) DT, 4-stage, separate for phase and residual currents IDMT, separate for phase and residual currents Under- / overvoltage protection Earth fault, wattmetric protections Frequency protection: f /df/dt / f/t Power-directional protection Thermal overload protection Directional earth fault PSB Power Swing Blocking Control Functions 6 configurable buttons Measurements Phase currents Earth current Phase and phase-to-phase voltages Power: P, Q Energy: active, reactive Other Functions Auto-reclosing control: (3-phase) P433 (1/3-phase) P435 Circuit breaker failure protection Switch on to fault protection Limit values monitoring Interlocking 4 setting groups Measuring circuit monitoring (voltage and current) Programmable scheme logic Programmable inputs / outputs / LEDs max 16 x I / 30 x O (P433/P435-40TE) max 28 x I / 46 x O (P435-84TE) Analogue I/O module (option) 3 communication ports (option) Communication protocols: IEC 60870-103 / -101 / Modbus / DNP3.0 / IEC61850 (KEMA certified) Recording of: Faults 8x200 signals Overload faults 8x200 signals Earth faults 8x200 signals Disturbances 8 waveforms (1kHz) Circuit breaker monitoring Synchro-check (option) Power swing blocking
26
MiCOM P437
NUMERICAL DISTANCE PROTECTION Functions: 50/51, 50N/51N, 67N, 49 ,50BF, 79, 27, 59, 59N, 32R/32F (F), 81O, 81U, 81R, 21, 78, 26/38 (R), 25, 74TCS Application Line protection for HV systems Protections Distance protection: circular or polygonal curve 6 distance stages 7 direction stages 8 timer stages start-ups: overcurrent, undervoltage and underimpedance directional voltage memory Time-overcurrent protections: backup (active when measuring circuit failure is detected) DT, 4-stage, separate for phase and residual currents IDMT, separate for phase and residual currents Under- / overvoltage Frequency protection: f, df/dt, f/t Thermal overload protection Earth fault protection Control Functions 6 configurable buttons Measurements Phase currents Earth current Phase and phase-to-phase voltages
Power: P, Q
Other Functions Auto-reclosing control (1/3-phase) Synchro-check (option) Power swing blocking Mutual compensation (option) Circuit breaker failure Switch on to fault protection Limit values monitoring Intertripping for distance protection Intertripping for earth fault protection 4 setting groups Measuring circuit monitoring (voltage and current) Programmable scheme logic Programmable inputs / outputs / LEDs max 28 x I / 46 x O Analogue I/O module (option) 3 communication ports (option) Communication protocols: IEC60870103 / -101 / Modbus / DNP 3.0 / IEC61850 (KEMA certified) Recording of: Faults 8x200 signals Overload faults 8x200 signals Earth faults 8x200 signals Disturbances 8 waveforms (1kHz) CB monitoring
27
MiCOM P432
DISTANCE PROTECTION AND BAY CONTROL Functions: 21P, 50/51, 50N/51N, 67, 67N, 46, 46BC, 50BF, 79 (3) (1), 27, 59, 51V, 78, 25, 60/VTS Application HV line protection Protections Distance protection: circular or polygonal curve 6 distance stages 7 direction stages 8 timer stages start-ups: overcurrent, undervoltage and underimpedance directional voltage memory Time-overcurrent protections: backup (active when measuring circuit failure is detected) DT, 4-stage, separate for phase and residual currents IDMT, separate for phase and residual currents Under- / overvoltage Frequency protection: f, df/dt, f/t Thermal overload protection Earth fault protection Control Functions Control of 6 switches Monitoring of 10 switches Monitoring of extra signals and measurements Mimic diagram Interlocking logic More than 290 configurable bay types Measurements Phase currents Earth current Phase and phase-to-phase voltages Power P, Q Other Functions Auto-reclosing control (1/3-phase) Synchro-check (option) Power swing blocking Mutual compensation (option) Circuit breaker failure Switch on to fault protection Limit values monitoring Intertripping for distance protection ntertripping for earth fault protection 4 setting groups Measuring circuit monitoring (voltage and current) Programmable scheme logic Programmable inputs / outputs / LEDs max 28 x I / 46 x O Analogue I/O module (option) 3 communication ports (option) Communication protocols: IEC60870-103 / -101 / Modbus / DNP 3.0 Recording of: Faults 8x200 signals (1 kHz) Overload faults 8x200 signals Earth faults 8x200 signals Disturbances 8 waveforms (1kHz) Circuit breaker monitoring
28
FAST MULTIFUNCTION DISTANCE PROTECTION Functions: 21P/21N, 50/27, I/V, 68, 78, 85, 50/51/67, 79, 25, 46, 46BC, 50N/51N/67N, 67SEF, 49, 27, 59, 59N, 50BF, CTS/VTS, 81U/O/R, FL
Application Fast distance protection for HV / LV overhead or cable lines Protections Single- (P443) and/or 3-phase tripping logic Single- and/or 3-phase autorecloser with optional synchro-check 5 zones of protection Delta directional comparison I/U Mho or quadrilateral (polygon) characteristics Loss of load protection Power swing alarm or blocking Directional / non-directional phase overcurrent Directional / non-directional earth fault Directional / non-directional negative sequence overcurrent Residual voltage protection Under- / overvoltage Switch on to fault and zone-selectable trip on reclose protection Out of step Measurements Comprehensive measurements Instantaneous, I, U, P, Q, ... Time integrated, demands Diagnostics of connections for teleprotections
Other Functions Broken conductor detection Measuring circuit monitoring (voltage and current) Parallel line compensation Zone 1 extension Load blinder characteristics Stub bus protection Thermal overload Circuit breaker failure Breaker condition monitoring 4 setting groups High break contacts (10A/220V DC) as option (max 8) InterMiCOM64 teleprotection - option Direct transmission of binary signals (max 8 per channel) Support for 3-terminal applications 1 or 2 FO channels (ST standard) Quick access HOTKEY keys Optional transmission protocols: Courier, IEC60870-5-103, DNP 3.0, IEC61850 + RS485 (Courier / IEC-103) Dual redundant Ethernet: RSTP, DHP, SHP 2nd port for remote communication Programmable scheme logic through PSL Editor (MiCOM S1) P443 A: 16 x I / 24 x O - A P443 B: 24 x I / 32 x O - B Extra I/O cards - option Recording of: Fault location Events - 512 Faults - 15 Disturbance waveforms - 20 (max window 10.5 s)
29
HIGH PERFORMANCE DISTANCE PROTECTION Functions: 21P/21N, 50/27, I/V, 68, 78, 85, 50/51/67, 79, 25, 46, 46BC, 50N/51N/67N, 67SEF, 49, 27, 59, 59N, 50BF, CTS/ VTS, 81U/O/R, FL Application Fast distance protection for HV / LV overhead or cable lines interacting with2 circuit breakers 1.5- and 2-CB systems Protections Single- (P443) and/or 3-phase tripping logic Single- and/or 3-phase autorecloser 5 zones of protection Delta directional comparison I/U Mho or quadrilateral (polygon) characteristics Loss of load protection Power swing alarm or blocking Directional / non-directional phase overcurrent Directional / non-directional earth fault Directional / non-directional negative sequence overcurrent Residual voltage protection Under- / overvoltage Switch on to fault and zone-selectable trip on reclose protection Out of step Measurements Comprehensive measurements Instantaneous, I, U, P, Q, ... Time integrated, demands Diagnostics of connections for teleprotections Other Functions Broken conductor detection Measuring circuit monitoring (voltage and current) Parallel line compensation Zone 1 extension Load blinder characteristics Stub bus protection Thermal overload Circuit breaker failure Breaker condition monitoring 4 setting groups High break contacts (10A/220V DC) as option (max 8) InterMiCOM64 teleprotection - option Direct transmission of binary signals (max 8 per channel) Support for 3-terminal applications 1 or 2 FO channels (ST standard) Quick access HOTKEY keys Optional transmission protocols: Courier, IEC60870-5-103, DNP 3.0, IEC61850 + RS485 (Courier / IEC-103) Dual redundant Ethernet: RSTP, DHP, SHP 2nd port for remote communication Programmable scheme logic through PSL Editor (MiCOM S1) P446 - 32 x I / 32 x O Recording of: Fault location Events - 512 Faults - 15 Disturbance waveforms - 20 (max window 10.5 s)
30
MiCOM P521
CURRENT DIFFERENTIAL PROTECTION Functions: 87L, 87T, 50/51, 50N/51N, 46, 46BC, 50BF, 37, 74TCS Application Current differential protection for MV/HV overhead or cable lines Line - transformer application Protections Biased Differential Protection Low impedance 3-phase tripping Intertripping both Direct and Permissive Immune to line charging inrush currents Selectable inrush restrain Time delayed overcurrent protection 4-stage phase overcurrent 4-stage earth fault Thermal overload Broken conductor detection Negative sequence overcurrent Undercurrent Measurements True RMS measured values Phase currents Neutral currents Sequence currents Bias and differential currents Remote currents Peak and rolling demand values Communication statistics Other Functions Direct optical fibre links 850nm Multi-mode 1300nm Multi-mode 1300nm Multi-mode Suitable for interface to multiplexed systems Adjustment to electrical standard with P590 modules EAI232 modems Standard telephone lines EAI485 / EAI422 / EAI 530 modems TD32 type - leased lines mDSL type Wire connection with fast Campus Baseband modems (56/64kbit/s max up to 18 km) CB failure Trip circuit supervision CB condition monitoring Optional remote transmission protocols: Modbus, IEC60870-5-103 Local communication: RS232 Commissioning tests Recording of: Events 250 Faults 25 Disturbance waveforms 5 (1600Hz, window 3s, COMTRADE record format)
31
HIGH-SPEED CURRENT DIFFERENTIAL UNIT PROTECTION Functions: 87L, 50, 51, 50N, 51N, 46, 46BC, 49, 50BF Application Differential protection of HV / LV overhead or cable lines Protection of 2- or 3-terminal overhead or cable lines Line - transformer application Binary signal transfers for intertripping of distance protections Protections Current differential: phase current compensation, CT ratio correction, vector compensation, transformer inrush restraint (2nd harmonic) Directional / non-directional phase and earth fault overcurrent Thermal overload Broken conductor detection Measurements Local and remote currents Sequence currents Bias and differential currents Thermal state Propagation delay Other Functions Dual redundant communications Propagation delay compensation Setting of a transformer connection group Direct and permissive intertripping via a communication channel Circuit breaker failure Autoreclose function for P542 4 setting groups Communication with optical fibre (point - point) or with multiplexed systems InterMiCOM64 teleprotections Binary signal transfers - max 8 signals per channel (max 16 signals per 2 channels) Optional transmission protocols: Courier, Modbus, IEC60870-5-103, DNP 3.0 Programmable scheme logic through PSL Editor (MiCOM S1) P541 - 8 x I / 7 x O P542 - 16 x I / 14 x O Recording of: Fault location CB diagnostics Error statistics for active channels Events 512 Trips 5 Disturbance waveforms 20 max window 10.5s, COMTRADE record format
MiCOM P541_J
MiCOM P542_J
32
HIGH-SPEED CURRENT DIFFERENTIAL UNIT PROTECTION Functions: 50/51, 50N/51N, 67, 67N, 49, 46BC, 50BF, 79, 87L, 21P/21N, 27, 68, 78, 85, 59, 59N, CTS/VTS, 25, 81O/U, 81R, FL Application Differential protection of HV / LV overhead or cable lines with optional distance protection functions Protection of 2- or 3-terminal overhead or cable lines Line - transformer application Applicable in SDH/SONET synchronous networks Protections Two CBs configuration (P544, P546) Current differential: phase current compensation, CT ratio correction, vector compensation, transformer inrush restraint (2nd harmonic) Directional / non-directional phase and earth fault overcurrent Directional wattmetric earth fault Thermal overload Sensitive earth fault 5-zone distance protection - option Power swing blocking Out of step protection Broken conductor detection Measurements Local and remote currents Sequence currents Power and energy Bias and differential currents Thermal state Propagation delay Other Functions Dual redundant communications Propagation delay compensation Capacitive current compensation Setting of a transformer connection group Direct and permissive intertripping via a communication channel Circuit breaker failure Autoreclose with synchro-check Teleprotection functions - 2 groups Supervision of current and voltage measuring circuits 4 setting groups High break outputs (10A / 220V DC) as option (max 8 otputs) - P543/4/5/6 Communication with optical fibre (point - point) or with multiplexed systems InterMiCOM64 teleprotections Binary signal transfers - max 8 signals per channel (max 16 signals per 2 channels) Optional transmission protocols: Courier, Modbus, IEC60870-5-103, DNP 3.0, IEC 61850 + RS485 (KEMA certified) Dual redundant Ethernet: RSTP, DHP, SHP Programmable scheme logic through PSL Editor (MiCOM S1) P543/4/5/6 - min. 16 x I / 14 x O Extra I/O modules Recording of: Fault location Error statistics for active channels Events 512 Faults 15 Disturbance waveforms 20 max window 10.5s, COMTRADE record format
MiCOM P543/4/5/6_K
[ Protection Relays Guide ] Differential Protections for Transformers, Generators and Motors
33
MiCOM P532
LINE DIFFERENTIAL PROTECTION AND CONTROL DEVICE Functions: 87L, 50/51, 50N/51N, 50BF, 67, 67N, ADMIT, 49, 79 (3), 32N, 27, 59, 47, 27D, 59N, 32R/32F (F), 51V, 26/38 (R), 46, 25, 74TCS, CTS/VTS, FL Application Selective and sensitive protection of overhead and cable lines One-box solution with optional bay controller in MV systems Protections Line current differential Directional phase-phase overcurrent, 3-stage IDMT and 1-stage DT Directional earth fault Directional, active and reactive power Unbalance, check of the negative sequence current Thermal overload with 1 thermal time constant Admittance earth fault Under- / overvoltage Switch onto fault protection Synchro-check (option) Control Functions (IED with graphic HMI) Control of 6 switches (IED with graphic HMI) Monitoring of 10 switches (IED with graphic HMI) Control and monitoring of 3 switches (IED with text HMI 6I6O module required) More than 290 pre-defined bay types Check of extra signals and measurements Mimic diagram Interlocking logic Measurements Differential and restraining current Angles between local and remote currents (separate for each of the 3 phases) Local and remote phase currents Earth current Voltages Power P, Q, S Energy: active, reactive Thermal state Other Functions Autoreclose function 4 setting groups CB failure scheme Circuit breaker monitoring Programmable inputs / outputs / LEDs Max of 46 x I / 30 x O 3 communication ports (option) Communication ports: IEC 60870-103 / -101/ Modbus / DNP 3.0 / IEC 61850 (KEMA certified) Recording of: Faults 8x200 events Overload faults 8x200 events Ground faults 8x200 events Disturbances 8 waveforms (1kHz)
[ Protection Relays Guide ] Differential Protections for Transformers, Generators and Motors
34
UNIVERSAL DIFFERENTIAL RELAY Functions: 50/51, 50N/51N, 49, 87 (T), 81O, 81U, 81R, 24, 64N/87N, 26/38 (R), 74TCS, 50BF
Application Differential protection with supplementary functions for transformers, motors and generators Protections Differential: amplitude and vector group matching zero-sequence current filtering for user-selected winding(s) inrush restraint (2nd harmonic) overfluxing restraint (5th harmonic) saturation discriminator MiCOM P631: 2 ends MiCOM P632: 2 ends MiCOM P633: 3 ends MiCOM P634: 4 ends Restricted earth-fault, separate for each end of the protected unit (P632/3/4) Overcurrent: DT or IDMT, 3-stage, separate for phase and residual currents Io calculated or measured (P632/3/4) Thermal overload (for 2 ends) Frequency: f, df/dt, f/t (P632/3/4) Overfluxing U/f Control Functions Control and monitoring of 3 switches 6 configurable function keys Check of extra signals and measurements Interlocking logic More than 80 pre-defined bay types
Measurements Differential and restraining currents Phase currents (separate for each phase and each end of the protected unit) Earth current (separate for each end of the protected unit) Phase shifts between phases Phase shifts between the same phases of different ends in the protected unit Voltages (P632/3/4) Other Functions Limit values monitoring 4 setting groups Programmable scheme logic Programmable inputs / outputs / LEDs Analogue I/O module (option) 3 communication ports Communication protocols: IEC60870-103 / -101 / Modbus / Courier / DNP 3.0 / IEC61850 (KEMA certified) Recording of: Disturbances 8 waveforms (1kHz) Overload faults 8x200 signals Faults 8 x 200 signals
35
MiCOM P132
VOLTAGE PROTECTION WITH LOAD SHEDDING SCHEME Functions: 27, 59, 47, 27D, 59, 59N, 81O, 81U, 81R Application Voltage and frequency protection for applications in voltage measurement bays of a MV substation Protections Phase under- / overvoltage Under- / overvoltage for positive sequence (U1) Under- / overvoltage for negative sequence voltage (U2) Overvoltage for zero-sequence (Uo) Monitoring of phase-to-phase and/or phase voltages Frequency (4-stage) with change of frequency rate df/dt with supervision of mean rate of frequency change (f/t) Measurements Phase voltages Phase-to-phase voltages Positive, negative and zero-sequence voltages Other Functions Limit values monitoring 4 setting groups Measuring circuit supervision Programmable scheme logic Programmable inputs / outputs / LEDs (4 x I / 8 x O) or (4 x I / 14 x O) or (10 x I / 11 x O) 3 communication ports (option) Communication protocols: IEC 60870-5-103 / -101 / Modbus / DNP 3.0 / IEC 61850 (KEMA certified) Recording of: Disturbances - 8 waveforms (1kHZ)
MiCOM P921
VOLTAGE PROTECTION RELAY Functions: 27, 59, 59N Application Comprehensive voltage protection Protections Undervoltage, 3-stage, IDMT and DT Overvoltage, 3-stage, IDMT and DT Residual overvoltage, 3-stage, IDMT and DT Measurements Voltages Frequencies Other Functions Available configurations: 3 (phase-neutral) 2 (phase-phase + residual) 2 (phase-neutral + residual) 1 (phase-phase + residual) 1 setting group CB state monitoring Blocking logic Programmable 2 binary inputs, 4 output relays and LED diodes Output contact latching Communication standards: RS232, RS485 Transmission protocols: Courier, Modbus, IEC60870-5-103 Documents Catalogue card User manual
36
VOLTAGE PROTECTION WITH LOAD SHEDDING SCHEME Functions: 27, 59, 47, 27D, 59, 59N, 81O, 81U, 81R, U/t Application Comprehensive voltage protection with Load Shedding Scheme Protections Undervoltage, 3-stage, DT and IDMT Overvoltage, 3-stage, DT and IDMT Zero-sequence overvoltage, 3-stage, DT and IDMT Negative sequence overvoltage, 2-stage, DT and IDMT Positive sequence undervoltage, 2-stage, DT and IDMT Under- / overfrequency, 6-stage 6-stage df/dt (P923 only) U/t (P923 only) Measurements Voltages basic harmonic average values peak values Frequencies Documents Catalogue card User manual Other Functions Available configurations: 3 (phase-neutral) 2 (phase-phase + residual) 2 (phase-neutral + residual) 1 (phase-phase + residual) 2 setting groups CB state monitoring CB supervision Blocking logic Programmable 5 binary inputs, 8 output relays and LED diodes Output contact latching Communication standards: RS232, RS485 Transmission protocols: Courier, Modbus, IEC60870-5-103 Recording of: Events 250 Faults 250 (1600 Hz, window 2.5s)
VOLTAGE & FREQUENCY PROTECTION RELAY Functions: 27, 59, 81O, 81U, 81R, 60/VTS, 81AB Application All application where accurate frequency monitoring is required for system stability Load shedding scheme and autoreclose functionality afterwards Protections Under- / overfrequency 6-stage, 4 measuring criteria: check of frequency, time-delayed change of frequency rate df/dt, time-delayed frequency supervision vs. change of frequency rate f+df/dt, instantaneous frequency supervision vs. mean rate of frequency change f+f/t, instantaneous Abnormal operation of a generator; check of frequency changes within a timeframe, in 4 bands Under- / overvoltage, 2-stage. IDMT and DT. Documents Catalogue card User manual Measurements Voltages Frequencies Other Functions 4 setting groups Load shedding scheme, 6-stage Trip statistics Programmable inputs (logic 250 AND/OR gates and timers), output relays and LED diodes P941: 8 x I / 7 x O P943: 16 x I / 14 x O Communication standards: RS232, RS485 Another RS232/RS485 port as an option Transmission protocols: Courier, Modbus, IEC60870-5-103, DNP 3.0 Recording of: Events 512 Faults 20 (1200Hz, window 10.5s) Extra I/O modules 6-stage autoreclose after load shedding scheme
[ Protection Relays Guide ] Busbar Protections MiCOM P741 (CU) / MiCOM P742 (PU) / MiCOM P743 (PU)
37
NUMERICAL BUSBAR PROTECTION RELAYS WITH CB FAILURE PROTECTION - DISSIPATED Functions: 87BB/P, 87BB/N, 87CZ, 50/51, 50N/51N, CTS, 50BF Application Busbar and CB failure protections applicable in 110/220/400 kV power transmission and distribution network substations Suitable for industrial network and power plant substations (including reversible generators) Substation topologies: 1 and 2 CBs, mesh corner Protections Busbar bias differential - P741 (CU) Check zone protection - P741 (CZ) Circuit breaker failure protection (general 3-pole trip) - P741 (CU) Dead zone protection (a short zone between CB and CT) Non-directional overcurrent protection: P742/P743 phase fault (2-stage) earth fault (2-stage) Circuit breaker failure protection (single- and 3-pole retrip) - P742/3 Measurements Central Unit (P741) differential current: Idiff/phase/zone bias current: Ibias/phase/zone zone check: Idiff/zone Peripheral Units (P742/P743) phase currents: IL1, IL2, IL3 earth current: Io frequency Other Functions Possibility to configure up to 8 zones and 28 Peripheral Units per a single Central Unit (P741) Distributed and centralised architecture in cubicles Fast fault clearance (a typical tripping time of 13 ms) Dynamic adjustments to changes in substation topology Innovative algorithms for CT saturation detection Possibility to accommodate different CT classes, with CT differentiating up to 40 times Available testing functions Optional transmission protocols: Courier, IEC 608705-103, IEC 61850 (P741, P743) Dual redundant Ethernet: RSTP , DHP , SHP Another RS232/RS485 port (Courier only) for P741, P743 Programmable scheme logic through PSL Editor (MiCOM S1) P741 - 8 x I / 8 x O P742 - 16 x I / 8 x O P743 - 24 x I / 21 x O Recording of: Events 512 Faults 5 Disturbance waveforms 20 10.5s for P742/P743 1.2s for P741
38
NUMERICAL BUSBAR PROTECTION RELAYS WITH CB FAILURE PROTECTION - CENTRALISED Functions: 87BB/P, 87BB/N, 87CZ, 50/51, 50N/51N, CTS, VTS, 50BF Application Busbar and CB failure protections applicable in 110/220/400 kV power transmission and distribution network substations Suitable for industrial and railway networks as well as for power stations H3 - H5 substations (110kV) Protections Busbar bias differential Check zone protection (CZ) Circuit breaker failure protection (general 3-pole trip) Dead zone protection (a short zone between CB and CT) Non-directional overcurrent protection: phase fault (2-stage) and earth fault (2-stage) Unbalance load (2-stage) Supervision of voltage and current circuits
3-box mode (one per phase)
1-box mode
Measurements Differential and bias current per phase and per zone/system Differential current per phase for check zone Phase currents: L1, L2, L3 Sequence current Voltages Frequency
Other Functions Possibility to configure up to 2 systems P746 in 1-box mode solution can accommodate up to 6 CTs, 6 breakers, 12 isolators P746 in 3-box mode solution can accommodate up to 18 CTs, 18 breakers, 36 isolators Fast fault clearance (a typical tripping time of 12 ms HBC or 17 ms SC) Dynamic adjustments to changes in substation topology Innovative algorithms for CT saturation detection Optional voltage criteria Tricolour LED diodes, function keys x 10 and HOT KEY x 2 Available testing functions Software for switch status monitoring and realtime measurements (Remote HMI) Optional transmission protocols: Courier, IEC60870-5-103, DNP 3.0, IEC 61850 (KEMA certified) Dual redundant Ethernet: RSTP, DHP, SHP Cyber Security on the NERC norm Another independent RS232/RS485 port (Courier only) Programmable scheme logic through PSL Editor (MiCOM S1) P746 - max 40 x I / 32 x O Recording of: Events - 512 Faults - 5 Disturbance waveforms - max 10.5s, single disturbance (min. 50 records, 1.5s - memory of 75s)
39
On the basis of the state of a bus coupler CB, the P13x selects a type of back-up supply configuration. Accordingly, a changeover scheme mode and a sequence of control operations are chosen automatically. The device may be programmed to operate both in 1-shot changeover scheme and in return changeover scheme. The scheme can be blocked by: external signals, sent to binary inputs from other controllers or functional relays, located in other bays internal signals, sent from an integrated facility which monitors the switching state, or after a successfully completed scheme a system of higher level. If no protection relay is required in a bus coupler bay, the P13x utilises its binary inputs and output relays only, whereas its protection facilities are disabled. There are 2 MiCOM P13x devices installed in parallel in 2 feeder bays. In such a case the relays perform several protection functions for feeder lines, apart from the changeover scheme features described above.
MULTIFUNCTION LV LINE TERMINAL PROTECTION AND CONTROL IED Functions: 79, 25, 50/51/67, 50N/51N/67N, 51N/67N/SEF, 67/46, 46BC, 49, 27, 59, 59N, 50BF, CTS/VTS, 81U/O/R, FL Other Functions Broken phase conductor detection Voltage and current transformer supervision Thermal overload Circuit breaker failure protection Breaker condition monitoring 4 setting groups High speed, high break contacts (10A/220V DC) available as an option (max 8) InterMiCOM64 teleprotection - option Direct transmission of binary signals Support for 3-terminal applications 1 or 2 FO channels (ST standard) Quick access HOTKEY keys Optional transmission protocols: Courier, IEC60870-5-103, DNP 3.0, IEC61850 + RS485 (Courier / IEC-103) Dual redundant Ethernet: RSTP, DHP, SHP 2nd port for remote communication Programmable scheme logic through PSL Editor (MiCOM S1) P841 - 24 x I / 32 x O Recording of: Fault location Events - 512 Faults - 15 Disturbance waveforms - 20 (max window 10.5s)
40
Application Suitable for interaction with automatic relays of P115 and P124 types Back-up for auxiliary supply voltage for digital protection relays in case of a short-term loss of voltage supply Applicable for trip coils in 110kV bays (e.g. 110/MV transformer bays) Key Features The cumulated energy (max 300V / 118J) remains over 8 days without recharge Possibility to energize 2 different tripping circuits (max 2 x 59 J) Load status indicators
Other Features Internal monitoring of current Possibility to operate with trip coils at 24V, 110V and 230V levels Test button switches allow discharge of each of capacitor banks Case of 10TE Midos type Flush mounting, available adapters for wall mounting Operating temperature range: -25C to +55C
MiCOM P891
CIRCUIT BREAKER TRIP / CLOSE MODULE Application Direct control of CB tripping and closing Co-operation with MiCOM relays and P991 test blocks Key Features Pushbutton switches LED indicators for device open and close indication Universal power supply for LED indication circuit Dedicated output contacts per pushbutton, direct wiring with tripping, controlling and indicating circuits Documents Catalogue card Other Features Suitable for synchro-check modules and autoreclosing facility Available for ring- and pin-terminals Pushbutton covers are provided to prevent inadvertent operation of pushbutton switches Case of 10TE Midos type
[ Protection Relays Guide ] Accessories MiCOM P991 / MiCOM P992 / MiCOM P993
TEST BLOCKS
41
Application Direct access to protective automation equipment and measuring relays Breaking of measuring and tripping circuits Key Features Factory configurable to the customers requirements (available 14 circuits) Sequential shorting / breaking of circuits Automatic shorting of current circuits One test plug applicable for all possible configurations of the socket Available single-finger (P993) or multi-finger (P992) test plugs
Other Features Customers configuration defined at the ordering stage Screw terminals (pod M4) Mechanical polarisation of the plug Case of 10TE Midos type Flush mounting, available adapters for wall mounting Operating temperature range: -25C to +55C
P991
P992
P993
42
GPS SYNCHRONIZING UNIT Application Real time synchronisation in IRIG-B standard (in modulated or un-modulated mode) for protections, recorders or RTUs within a whole substation / switchyard Real time synchronisation for protections, recorders or RTUs within a whole substation / switchyard through opto input (e.g. Px20 Phase2 V11, Px30, Px40 series) Sampling synchronisation for current-differential protection relays of P543/4/5/6 type installed in synchronous optical networks SDH/SONET (fibre-optic link) Sampling synchronisation for CVCOM Merging Units linked with non-conventional instrument transformers (NCITs) via IEC61850-9-2 protocol. Sampling synchronisation for Phasor Measurement Units Other Functions Parameter settings input by means of LCD front panel Available 8 LED indicator diodes Available 2 watchdog contacts 4 fibre-optic outputs (for P543/4/5/6 ) 1 IRIG-B input (modulated), BNC type 1 IRIG-B input (non-modulated), RS422 type 4 output relays (configurable) Pulse-per-minute (PPM) or Pulse-per-hour (PPH) functionality Module supplied with antenna and cable (25m or 50m) Universal auxiliary voltage supply Vx AC/DC Flush unit casing in MiCOM 20TE standard
Services
The services offered constitute a substantial part of business activities run by Schneider Electric Energy Poland Sp. z o.o. in the area of Protections and Systems. Being a global player in the sectors of energy generation, transmission and distribution for power industry and industrial power plants, we are offering a servicing scheme customised to meet individual customers requirements.
Repairs Equipment reparations Lending of replacement products for the repair period Efficient troubleshooting Modernisation of legacy solutions Installation Retrofit Maximum efficiency at minimum costs Maintenance and Technical Support Technical aid and assistance on a customers site Spare parts stock Maintenance of equipment Spare Parts Offer of supplies of necessary parts and components Training Sessions Related to products Related to commissioning operations As per customers requests
Consulting and Expertise Technical support Application counselling Assistance in selection, input and modification of settings Installation and Commissioning A team of professionals trained in handling our products installed on sites
43
Easergy T200I
MV AND MV/LV SUBSTATION CONTROL UNIT WITH TELECONTROL INTERFACE TO SCADA SYSTEMS
Application 4 to 36kV cable networks MV network management Collaboration with standard MV switchgears (e.g. RM6 etc. ) Remote monitoring of network parameters Monitoring of external IEDs via Modbus protocol Cooperation with external, directional fault passage indicators Supervision and control over the equipment installed in a substation Power supply switchover automation (internal logic schemes) Functions & Measurements Measurements of work currents on cable lines Measurements and indication of fault currents on cable lines Measurements and control of voltages on MV or LV side Communication Available 3 communication ports: 2 remote as per options and 1 of Ethernet type Remote network: radio, PSTN, GSM/GPRS, Ethernet Local network: RS485 Modbus. Communication protocols: IEC870-5-101 and IEC870-5-104, DNP3. The angles between local and remote currents (separately for each of the 3 phases) Local and remote phase currents Earth current Voltages Power P, Q, S Energy: active, reactive Thermal load
Other Functions Remote control and parameter setting with a built-in Web server Remote access to data in parallel to the control system by means of GSM, GPRS, Ethernet, PSTN transmission links Cooperation with L500 system for Easergy equipment Monitoring of battery availability Power supply self-check Transmission of alarms to SCADA system Selection of local and remote mode of operation 6 binary inputs for general utilisation 1 binary input for internal FPI reset 1 output relay for external FPI reset 1 output relay for launching an external flashing indicator (visibility 50m, a flash every 1s ) Automatic selectioniser Automatic changeover switch with generator start-up function Paralleling Archives of events and measurements 5 types of counters In-built fault current detector Control of 4, 8 or 16 switches at a substation Dedicated CTs Unified connector for measuring circuit connections
44
Flair200C
DIRECTIONAL INDICATOR OF FAULT PASSAGE WITH RTU FUNCTIONALITY AND REMOTE COMMUNICATION FOR CABLE NETWORKS Application Detection of earth fault current passages in networks with resistor-earthed, directly earthed or isolated neutral and compensated system Remote monitoring of MV substation status Remote monitoring of network parameters: load, current, power Recordings Monitoring of external IEDs via Modbus protocol Monitoring of substation conditions: temperature, smokiness, door opening, fuse tripping etc. Functions Directional functionality to detect earth faults selectively in a standard and emergency mode of substation operations (optional ICC algorithm to detect faults, with Insensitive to Capacitive Currents, a patented solution ) Possibility to monitor external IEDs via Modbus protocol (substation RTU) Communication IP standards: IEC870-5-101 and -103 DNP3 level 3, serial and TCP/IP Modbus , serial and TCP/IP Interfaces: GSM/GPRS, radio (FSK/FFSK), PSTN V32, Ethernet RS232/RS485 (external modem) Ethernet (extra port) Other Functions Resetting of fault indications in MV networks: automatic after time delay, automatic upon voltage return and manual by a push button Suitable for connection to power supply wiring from LV switchgear Suitable for connection with external indicator terminals, wall-mounted on a transformer station 1 or 2 measuring channels Inrush filtering function Time synchronisation through SCADA, local PC, Ethernet Available 6 binary inputs and 3 output relays Memory capacity to store: - 10000 events - 2000 alarms - 6000 system - 30000 measurements Variable recording and time-stamping Local and remote operations and maintenance performed via a built-in Web server Password-protected access to data 3 access levels can be defined: Administrator, Operator, Monitoring. Cooperation with L500 supervision and control system for Easergy range
45
Other Parameters Power and energy metering in accordance with PN-EN 62053-22 Class 0.2S Parameters of electrical energy quality recording compliant with PN-EN 610004-30 Class A (confirmed by KEMA and PSL laboratories) Metering of voltage and current harmonics and interharmonics in accordance with PN-EN 61000-4-7 Individual analysis of voltage and current harmonics (ION7650 for H511 and ION8800A for H63) Assessment of quality of supply voltage in accordance with PN-EN 50160 Voltage sagging and swelling detection, accuracy of cycle (10ms) Capture of ultra-fast transients (up to 20 s) Oscillograph recorder function resolution of 1024 samples per a cycle (51kHz) GPS time synchronisation Internal memory of up to 10MB for data and alarms Built-in LCD display - access to realtime measurements, spectral analysis of harmonics, vector diagram of voltages and currents and user-defined screens
46
NETWORK PARAMETER ANALYSER WITH FAULT DETECTION AND OSCILLOGRAPH RECORDING Application Sub-billing, cost allocation, and utility bill verification Remote monitoring of electrical installations Mid-range power quality and energy management analysis Utility contract optimisation and load preservation Features Measurement of parameters up to 63rd harmonic (PM850/870 ) Binary inputs: 1/8 - option Binary outputs: 1/4 - option Analogue inputs: 0/4 - option Analogue outputs: 0/4 - option Communication 16 binary inputs 4 output relays 8 analogue outputs - option Communication Modbus RTU / RS485 Optional Ethernet communication port provides communication via Modbus TCP/IP protocol, -mail on alarm, web server and Ethernet-to-serial gateway. Transparent Ready - compliant with Level 1 Other Functions Direct connect voltage inputs. No need for potential transformers (PTs) up to 600 VAC Intuitive navigation with self-guided, languageselectable menus Large, anti-glare display with white back-light provides summary screens with multiple values Custom alarming with time-stamping Individual harmonic magnitudes and angles and waveform capture (PM850 and PM870) Voltage and current disturbance (sag and swells) detection and configurable waveform capture (PM870) ANSI C12.20 and IEC 62053-22 Class 0.5S for active energy. Accurate energy measurements for sub-billing and cost allocation Trend curves and short-term forecasting (PM850 i PM870) 5 channels to calculate the consumption of water, air, gas, electricity and steam in all models. Each channel can gather impulses from several inputs. Optional remote display unit (distance of up to 10m from the analyser)
47
SEPAM
SEPAM Range of Protections Series 10: Simple applications for MV lines and distribution transformers Series 10 incorporates 3 types of SEPAM relays: series 10 N with phase or earth fault overcurrent protection series 10 B with overload, 3f short-circuit and earth fault protection series 10 A has the same functions as SEPAM series 10 B, with opto-insulated inputs and extra output relays i
Series 10
Series 20: Overcurrent or voltage protections for typical configurations Series 20 incorporates 7 types of SEPAM relays. Features: 3 types of UMI display types 4 current inputs OR 4 voltage inputs 10 opto-insulated binary inputs 8 output relays 1 Modbus communication port 1 analogue output (MST module) 8 RTD temperature measurement inputs (MSA module)
Series 20
Series 40: Overcurrent or voltage protections for complex configurations Series 40 incorporates 13 types of SEPAM protections dedicated for various types of MV bays. Features: 3 types of UMI display types 4 current inputs 3 voltage inputs 10 binary inputs 8 output relays Connection to Ethernet TCP/IP network with Web Server Logical equation editor 1 Modbus communication port 16 RTD temperature measurement inputs (MET module)
Series 40
48
SEPAM
SEPAM Range of Protections Series 60: Advanced overcurrent and voltage protections Series 60 incorporates 8 types of SEPAM protections dedicated for various types of MV bays. Features: 3 types of UMI display types 4 4 current inputs 3 voltage inputs 28 opto-insulated binary inputs 16 output relays Logical equation editor Integrated IEC 61850 and Modbus TCP/IP via RSTP Available protocols: Modbus, Modbus TCP/IP, IEC60870-5-103, DNP3 (RS485 or FO) 4 communication ports plus 1 local 16 RTD temperature measurement inputs (MET module) 1 analogue output (MSA module) External cartridge memory to save settings and configuration
Series 60
Series 80
Series 80: Multifunctional overcurrent and voltage protections Series 80 incorporates 16 types of SEPAM protections dedicated for various types of MV bays. Features: 3 types of UMI display types 12 analogue inputs: - 8 current inputs and 4 voltage inputs - 4 current inputs and 8 voltage inputs 42 opto-insulated binary inputs 23 output relays 4 communication ports plus 2 local Modbus Integrated IEC 61850 and Modbus TCP/IP via RSTP Available protocols: Modbus, Modbus TCP/IP, IEC60870-5-103, DNP3 (RS485 or FO) 16 RTD temperature measurement inputs (MET module) External cartridge memory to save settings and configuration Logipam - software to program specific logical functions
49
Page No.
11
10
10
10
17
18
29
34
35
35
MiCOM P114
MiCOM P115
MiCOM P116
MiCOM P124S
MiCOM P122C
MiCOM P124D
MiCOM P120_1p
MiCOM P125_1p
MiCOM P211
MiCOM P121
MiCOM P122
MiCOM P123
MiCOM P126
MiCOM P127
MiCOM P220
MiCOM P225
MiCOM P521
MiCOM P821
MiCOM P921
MiCOM P922
MiCOM P923
ANSI Code
50/51
50N/51N
67
67N
67YN
37
Thermal overload
49/51
46
46BC
50BF
Circuit breaker failure Multi-shot autoreclose (3 3 phase trip, 1 - 1 & 3 phase trip) Wattmetric earth fault
79
32N // 67W
Phase undervoltage
27
Phase overvoltage
59
47
27D
59N
27TN // 59TN
87
32R // 32F
32O
32L
Overfrequency
81O
Underfrequency
81U
81R
51V
64N // 87N
26 / 38
48
51LR // 50S
Start number
66
Out of step
55
ABS *
Check synchronising
25
74TCS
Fault locator
FL*
Switch On To Fault
50HS
VTS / CTS
50
Page No. MiCOM P132 MiCOM P139 MiCOM P433 MiCOM P435 MiCOM P437 MiCOM P439 MiCOM P532 MiCOM P631 MiCOM P632 MiCOM P633 MiCOM P634 MiCOM P130C MiCOM P430C MiCOM P530C MiCOM P630C
Revision A_2011 Function symbols in accordance with ANSI / IEEE Std C37.2 - 1996 Standards * - the symbol does not appear in the Standard
ANSI Code
P30
50/51
50N/51N
67
67N
67YN
37
Thermal overload
49
46
46BC
50BF
79
32N // 67W
Phase undervoltage
27
Phase overvoltage
59
47
27D
59N
27TN // 59TN L F F F F F F L F T T T T T
87
32R // 32F
Overpower
32O
32L
Overfrequency
81O
Underfrequency
81U
81R
Overfuxing_U/Hz
24
51V
21
64 // 87N
64R P R R R R P R R R R R
78 / 68
26 / 38
48
51LR // 50S
Start number
66
Out of step
55
ABS*
Check synchronising
25
74TCS
Fault locator
FL*
51
Switch On To Fault
50HS
VTS / CTS
Page No. MiCOM P741/2/3 MiCOM P443Mho MiCOM P142 MiCOM P143 MiCOM P145 MiCOM P241 MiCOM P242 MiCOM P243 MiCOM P341 MiCOM P342 MiCOM P343 MiCOM P344 MiCOM P345 MiCOM P441 MiCOM P442 MiCOM P444 MiCOM P446 MiCOM P445 MiCOM P541 MiCOM P542 MiCOM P543 MiCOM P544 MiCOM P545 MiCOM P546 MiCOM P547 MiCOM P746 MiCOM P841 MiCOM P941 MiCOM P943
14
14
14
15
19
19
19
20
21
21
22
21
27
28
30
30
31
31
31
31
36
37
38
35
35
MiCOM P141
Revision A_2011 Function symbols in accordance with ANSI / IEEE Std C37.2 - 1996 Standards * - the symbol does not appear in the Standard P40
ANSI Code
50/51
50N/51N
67
67N
67YN
37
49
Thermal overload Negative phase sequence thermal_I2 / Unbalance load Broken conductor detection 3 3 3 1 1 1 1 3
46
46BC 1
50BF
Circuit breaker failure Multi-shot autoreclose (3 3 phase trip, 1 - 1 & 3 phase trip) Wattmetric earth fault
79
32N // 67W
Phase undervoltage
27
Phase overvoltage
59
47
27D
59N
Residual overvoltage / Neutral displacement _ Uo 100% stator earth fault (3 harm.)_neutral // terminal 100% stator earth fault (20 Hz generator) M G G G L L
27TN // 59TN L L L L L SZ SZ
64S
87
32R
32O
32L
Overfrequency
81O
Underfrequency
81U
81R
81AB
VVS *
Loss of field
40
Overfuxing_U/Hz
24
51V
21
64 // 87N
50DT
64R
Rotor earth fault Unintentional energisation at standstill // Dead machine Pole slipping_Power swings
50 / 27
78 / 68
Temperature detectors
26 / 38
48
51LR // 50S
Start number
66
Out of step
55
25
Check synchronising
74CTS
FL*
Fault locator
50HS
52
Switch On To Fault
VTS/CTS
53
NOTES
54
NOTES
55
NOTES
Schneider Electric Energy Poland Sp. z o.o. REFA Zakad Automatyki i Systemw Elektroenergetycznych 58-160 wiebodzice ul. Strzegomska 23/27 tel. 74 854 84 10 fax 74 854 86 98 ref.swiebodzice@schneider-electric.com www.schneider-energy.pl
As standards, specyfications and designs change from time to time, please ask for confirmation of the information give in this publication. Publishing: Schneider Electric Energy Poland Sp. z o.o. Design: Schneider Electric Energy Poland Sp. z o.o. Printing: Schneider Electric Energy Poland Sp. z o.o.