Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 312 views

    Metcar Physical Properties PDF

    Uploaded by

    Javad Amnian
    The document describes various physical properties and test methods for Metcar graphite materials. It provides typical values for properties like apparent density, hardness, compressive strength, thermal conductivity, and corrosion resistance classification for different Metcar grades. The properties are determined through standardized tests to characterize materials' ability to withstand loads, transmit heat, and resist corrosion from various chemicals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Metcar Physical Properties PDF

    Uploaded by

    Javad Amnian
    312 views3 pages
    The document describes various physical properties and test methods for Metcar graphite materials. It provides typical values for properties like apparent density, hardness, compressive strength, thermal conductivity, and corrosion resistance classification for different Metcar grades. The properties are determined through standardized tests to characterize materials' ability to withstand loads, transmit heat, and resist corrosion from various chemicals.

    Original Description:

    properties

    Original Title

    Metcar-Physical-Properties.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes various physical properties and test methods for Metcar graphite materials. It provides typical values for properties like apparent density, hardness, compressive strength, thermal conductivity, and corrosion resistance classification for different Metcar grades. The properties are determined through standardized tests to characterize materials' ability to withstand loads, transmit heat, and resist corrosion from various chemicals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    312 views3 pages

    Metcar Physical Properties PDF

    Uploaded by

    Javad Amnian
    The document describes various physical properties and test methods for Metcar graphite materials. It provides typical values for properties like apparent density, hardness, compressive strength, thermal conductivity, and corrosion resistance classification for different Metcar grades. The properties are determined through standardized tests to characterize materials' ability to withstand loads, transmit heat, and resist corrosion from various chemicals.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Physical Properties

    Shown above (l to r): part-to-part quality repeatability; inspecting face condition on a mechanical seal primary ring; precision lapping of thrust washers; and, dimensional inspection and serialization with a DCC/CMM.

    Transverse Strength (ANSI/NEMA CB1) is a materials ability to withstand a transverse or flexural load. Values are obtained by loading to failure a rectangular beam suspended on two knife edges. Tensile Strength (ASTM C 749) is a materials ability to resist being pulled apart. Values are obtained from the uniaxial force at rupture per unit of cross section. Modulus of Elasticity (ASTM C 747) is a constant which expresses the ratio of stress per unit area to corresponding strain per unit length, the distortion or strain being within the elastic limit. Specimens are vibrated in the transverse mode, and values are calculated from the resonance frequency. Temperature Limit is the highest temperature that a material can tolerate without significant thermal decomposition or loss in strength; this varies with the amount of oxygen present. Metcar demonstrates an unusual ability to increase in strength with increase in temperature. Coefficient of Thermal Expansion (ASTM E 228) is the change in unit length per change in degree of temperature. Linear expansion is measured using a vitreous silica dilatometer which indicates dimensional changes of a specimen when subjected to heat. Metcars CTE increases as temperature increases; values listed represent an average from 50C to the respective temperature limit. Thermal Conductivity is a materials ability to transmit heat. Values are obtained from the cooling characteristics of a heated probe brought into contact with a specimen. Pressure Tight (a function of permeability) is a specification indicating the suitability of a given grade for use in seal ring applications. The internal cavity of a standard ring is pressurized with air. Its outside diameter is coated with a leak detecting fluid. An absence of bubbles (after 2 minutes at 100psi) defines acceptability.

    Physical Characteristics Test Methods


    On pages 7 to 9 of this brochure is a list of typical physical characteristics of the most popular Metcar grades. The following are definitions of terms and descriptions of methods used to obtain the physical characteristics of Metcar. Physical characteristics of carbon/graphite materials are sensitive to part size, shape and grain direction. To obtain the data presented here, specimens were tested with the length dimension oriented parallel to the grain direction. Apparent Density (ANSI/ASTM C 559) is the mass per unit volume including permeable and impermeable voids and pores. Values are calculated in grams per cubic centimeter at 25C. Hardness (ANSI/NEMA CB1) is a materials resistance to permanent deformation, particularly indentation or scratching. Shore Scleroscope hardness is determined by dropping a diamond pointed weight on a specimen from a standard height. The rebound up a graduated scale indicates hardness. Six readings taken on opposite sides of the specimen are averaged to obtain an accurate value. Compressive Strength (ANSI/ASTM C 695) is a materials ability to withstand a uniaxial crushing load. Values are obtained from the ultimate crushing force per unit of cross section. Ultimate strength and yield strength are identical.

    Metallized Carbon Corporation believes the information furnished in this publication is correct. However, it cannot assume responsibility for warranties express or implied with respect to its products, unless specifically included in written contract with the parties.

    Metcar Average Physical Characteristics


    Strength Temp. Limit

    n itio pos Com nce ista ion Res icat ion ssif ros Cla Cor ize oS le t dab Mo t Tigh re ssu Pre y ivit uct /ft) ond /F al C /ft2 rm /hr al The (Btu rm -6 The 10 ) t of x ian /F ffic in/in ) Coe ion ( (F ans ere Exp sph o Atm ng ) (F dizi Oxi ere sph tmo of al A us 6 utr dul 0 ) Ne Mo i x 1 (ps ity stic i) Ela (ps sile Ten ) psi e( ers nsv Tra i) (ps ve ssi pre re Com Sho 2 ss- e C dne cop Har eros Scl sity Den c) nt m/c are (g App

    o o o o o o o o o o o o o o o o o o o o o o o o

    e# rad rG tca Me

    t res nte Of I

    M-10 M-11 M-19 M-45 M-100 M-105 M-106 M-110 M-130 M-133 M-161 M-162 M-199 M-201 M-234 M-271 M-272 M-310 M-312 M-400 M-444 M-444B M-595 M-712

    1.70 1.75 1.80 2.10 1.85 1.85 1.85 1.85 1.85 1.85 2.55 2.40 2.35 2.50 2.50 2.45 2.55 2.40 2.40 1.85 2.30 2.30 1.85 1.85

    85 65 75 85 80 85 95 90 95 95 50 65 75 55 95 90 55 55 95 85 90 90 70 95

    30000 20000 20000 30000 27000 22000 41000 28000 42000 42000 20000 26000 35000 24000 45000 50000 25000 23000 55000 30000 40000 40000 20000 42000

    9000 7500 8000 12000 9000 8500 12500 9000 12000 12000 7000 10000 13000 8500

    6000 4500 5500 9000 6000 6000 8500 6500 9000 9000 5500 7500 8000 6500

    2.5 2.3 1.6 2.7 3.1 2 3.3 2.2 3.0 3.6 2.9 3.7 3.8 2.8 4.1 4.2 3.1 2.8 4.4 3.2 4.2 3.8 2.2 3.6

    1700 1700 6000 1500 500 500 500 500 500 500 400 400 1700 1700 1500 1700 1700 1700 1700 500 1100 1100 1500 500

    700 700 900 900 500 500 500 500 500 500 400 400 700 700 700 700 700 700 700 500 700 700 1000 500

    2.1 2.0 1.9 2.4 2.9 1.9 3.2 2.6 2.6 2.8 1.9 3.0 2.9 1.8 3.1 3.8 2.1 1.4 2.5 2.9 2.3 2.3 2.4 2.8

    6 8 40 45 8 40 6 40 6 6 15 9 10 20 9 8 19 18 8 8 8 8 40 6

    No No No Yes No Yes Yes Yes Yes Yes No No No No No No No No No Yes Yes No No Yes

    Yes Yes No No Yes No Yes No No No No Yes No No No No No No No No Yes No No No

    C1 C1 C1 C4 C2 C2 C2 C3 C3 C3 C5 C5 C6 C6 C7 C8 C8 C9 C9 C2 C10 C10 C9 C3

    CG CG G GF CGR GR CGR GR CGR CGR CGB CGB CGCU CGCU CGAG CGBR CGBR CGNICR CGNICR CGR CGSB CGSB GH CGR

    14000 10500 15000 8500 7500 9500 6500 5500

    16000 10000 9500 12000 12000 10000 12000 6500 9000 9000 7500 9000

    Composition Key CG = Carbon Graphite G = Graphite R = Resin Impregnation

    F = Proprietary Impregnation B = Babbitt Impregnation BR = Bronze Impregnation Cu= Copper Impregnation

    Sb= Antimony Impregnation Ag = Silver Impregnation N = Nickel Impregnation H = Oxidation Inhibitor Impregnation

    Chemical Properties
    Corrosion Resistance Classifications
    Resistant Not Resistant Conditionally Resistant*

    *Conditionally Resistant rating indicates that factors such as temperature, concentration, and exposure time prohibit unconditionable approval of certain grades in a particular chemical group. Consult Metcar engineering.

    Metcar Corrosion Resistance by Chemical Category


    Refer to the Physical Properties Table for the Corrosion Resistance Classification of each Metcar Grade.
    C1 Inorganic Neutral Salts Acid Forming Salts Alkali Forming Salts Non-Oxodizing Mineral Acids Oxidizing Mineral Acids Non-Oxodizing Mineral Alkalis Oxidizing Mineral Alkalis C1 Organic Neutral (Solvents,Oils,etc.) Acid Forming Salts Weak Acids Strong Acids Weak Alkalis Strong Alkalis C1 Melts Neutral Salts Acid Salts Alkaline Salts Oxidizing Salts Metals (Listed) C1 Gases Inert Acid Alkaline Oxidizing Reducing C2 C2 C2 C2 C3 C3 C3 C3 C4 C4 C4 C4 C5 C5 C5 C5 C6 C6 C6 C6 C7 C7 C7 C7 C8 C8 C8 C8 C9 C9 C9 C9 C10 C10 C10 C10

    You might also like