Study of Working Mechanisms of Important Components of Automobile Engine

MSc-I
Roll No.12
Study Of Working Mechanisms Of Important Components Of Automobile Engine

An Engine is an apparatus that converts fuel to mechanical energy to power a car. The purpose of a petroleum car engine is to convert petroleum into motion so that your car can move. Currently the easiest way to create motion from petroleum is to burn the petroleum inside an engine. Therefore, a car engine is an internal combustion engine - combustion takes place internally. Two things to note: There are different kinds of internal combustion engines. Diesel engines are one form and gas turbine engines are another. There is such a thing as an external combustion engine. A steam e ngine in old-fashioned trains and steam boats is the best example of an external combustion engine. The fuel (coal, wood, oil, whatever) in a steam engine burns outside the engine to create steam, and the steam creates motion inside the engine. Internal combustion is a lot more efficient (takes less fuel per kilometre) than external combustion, plus an internal combustion engine is a lot smaller than an equivalent external combustion engine. This explains why we don't see any cars from Ford and GM using steam engines. The potato cannon uses the basic principle behind any reciprocating internal combustion engine: If you put a tiny amount of high-energy fuel (like gasoline) in a small, enclosed space and ignite it, an incredible amount of energy is released in the form of expanding gas. You can use that energy to propel a potato 150 metres. In this case, the energy is translated into potato motion. You can also use it for more interesting purposes. For example, if you can create a cycle that allows you to set off explosions like this hundreds of times per minute, and if you can harness that energy in a useful way, what you have is the core of a car engine! Almost all cars currently use what is called a four-stroke combustion cycle to convert petroleum into motion. The four-stroke approach is also known as the Otto cycle, in honour of Nikolaus Otto, who invented it in 1867. The four strokes are:
Starting Position
Niranjana Karandikar
Intake stroke
Compression stroke
Page 1
MSc-I
Roll No.12
Ignition of fuel
power stroke
exhaust stroke
You can see in Figure 2 that a device called a piston replaces the potato in the potato cannon. The piston is connected to the crankshaft by a connecting rod. As the crankshaft revolves, it has the effect of "resetting the cannon." Here's what happens as the engine goes through its cycle: The piston starts at the top, the intake valve opens, and the piston moves down to let the engine take in a cylinder-full of air and petroleum. This is the intake stroke. Only the tiniest drop of petroleum needs to be mixed into the air for this to work; Then the piston moves back up to compress this fuel/air mixture. Compression makes the explosion more powerful; and When the piston reaches the top of its stroke, the spark plug emits a spark to ignite the petroleum. The petroleum charge in the cylinder explodes, driving the piston down. Once the piston hits the bottom of its stroke, the exhaust valve opens and the exhaust leaves the cylinder to go out the tailpipe. Now the engine is ready for the next cycle, so it intakes another charge of air and gas. The motion that comes out of an internal combustion engine is rotational, while the motion produced by a potato cannon is linear (straight line). In an engine the linear motion of the pistons is converted into rotational motion by the crankshaft. The rotational motion is nice because we plan to turn (rotate) the car's wheels with it anyway.
Page 2
MSc-I
Roll No.12
BASIC ENGINE PARTS: 1. Cylinder The core of the engine is the cylinder, with the piston moving up and down inside the cylinder. The engine described above has one cylinder. That is typical of most lawn mowers, but most cars have more than one cylinder (four, six and eight cylinders are common). In a multi-cylinder engine, the cylinders usually are arranged in one of three ways: inline, V or flat (also known as horizontally opposed or boxer), as shown in the following figures.
Inline - The cylinders are arranged in a line in a single bank.
Flat - The cylinders are arranged in two banks on opposite sides of the engine
V - The cylinders are arranged in two banks set at an angle to one another
2. Spark plug The spark plug supplies the spark that ignites the air/fuel mixture so that combustion can occur. The spark must happen at just the right moment for things to work properly. A spark plug has a metal threaded shell, electrically isolated from a central electrode by a porcelain insulator.
Niranjana Karandikar Page 3
MSc-I
Roll No.12
3. Valves The intake and exhaust valves open at the proper time to let in air and fuel and to let out exhaust. Note that both valves are closed during compression and combustion so that the combustion chamber is sealed.
4. Piston A piston is a cylindrical piece of metal that moves up and down inside the cylinder. The piston is moved up and down inside the cylinder by the crankshaft, which is connected to it via the connecting rod. A vacuum is formed as it takes its upward stroke, drawing air and fuel down through the reed valve. When the piston reaches the top, the spark plug then lights the air/fuel mixture, burning it and sending the piston back down. On the downward stroke, the reed valve gets closed because of the increased pressure of the fuel and air mixture within, which is being compressed. New fuel and air travel via the intake port into the cylinder, ready to be burnt. The exhaust is expelled through the exhaust port, and an unpleasant side effect is that it usually takes some of the unburned fuel mixture with it. 5. Piston Pins In internal combustion engines, the gudgeon pin (UK, wrist pin US) connects the piston to the connecting rod and provides a bearing for the connecting rod to pivot upon as the piston moves. In very early engine designs (including those driven by steam and also many very large stationary or marine engines), the gudgeon pin is located in a sliding crosshead that connects to the piston via a rod. 6. Piston rings Piston rings provide a sliding seal between the outer edge of the piston and the inner edge of the cylinder. The rings serve two purposes: They prevent the fuel/air mixture and exhaust in the combustion chamber from leaking into the sump during compression and combustion. They keep oil in the sump from leaking into the combustion area, where it would be burned and lost. Most cars that "burn oil" and have to have a quart added every 1,000 miles are burning it because the engine is old and the rings no longer seal things properly. 7. Connecting rod The connecting rod connects the piston to the crankshaft. It can rotate at both ends so that its angle can change as the piston moves and the crankshaft rotates. The connecting rod is connected to the crankshaft at one end, and to the piston at the other. It translates the movement of the crankshaft so that the piston is moved up and down.
Page 4
MSc-I
Roll No.12
8. Crankshaft The crankshaft turns the piston's up and down motion into circular motion just like a crank on a jack-in-the-box does. 9. Crank case In an internal combustion engine of the reciprocating type, the crankcase is the housing for the crankshaft. The enclosure forms the largest cavity in the engine and is located below the cylinder(s), which in a multi cylinder engine are usually integrated into one or several cylinder blocks. Crankcases have often been discrete parts, but more often they are integral with the cylinder bank(s), forming an engine block. Nevertheless, the area around the crankshaft is still usually called the crankcase. Crankcases and other basic engine structural components (e.g., cylinders, cylinder blocks, cylinder heads, and integrated combinations thereof) are typically made of cast iron or cast aluminium via sand casting. 10. Sump The sump surrounds the crankshaft. It contains some amount of oil, which collects in the bottom of the sump (the oil pan). References:
http://www.infovisual.info/05/007_en.html
Automotive industry training retail, service and repair aur05

http://auto.howstuffworks.com/car-parts-roundup.htm
Page 5

Study of Working Mechanisms of Important Components of Automobile Engine

Uploaded by

Copyright:

Available Formats

Study of Working Mechanisms of Important Components of Automobile Engine

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Study of Working Mechanisms of Important Components of Automobile Engine

Uploaded by

Copyright:

Available Formats

MSc-I

Study Of Working Mechanisms Of Important Components Of Automobile Engine

Inline - The cylinders are arranged in a line in a single bank.

Automotive industry training retail, service and repair aur05

You might also like