Intel Desktop Board DN2800MT Product Guide

Order Number: G37706-002

Revision History
Revision -001 -002 Revision History First release of the Intel Desktop Board DN2800MT Product Guide Second release of the Intel Desktop Board DN2800MT Product Guide Date October 2011 June 2012

Disclaimer
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTELS TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel Desktop Board DN2800MT may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from Intel Corporation by going to the World Wide Web site at: http://www.intel.com/ or by calling 1-800-548-4725.

Intel, Intel Core, Xeon, Celeron, and Pentium are trademarks of Intel Corporation in the United States and/or other countries. * Other names and brands may be claimed as the property of others. Copyright 2011, 2012 Intel Corporation. All rights reserved.

Preface
This Product Guide gives information about board layout, component installation, BIOS updates, and regulatory requirements for Intel Desktop Board DN2800MT.

Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for general audiences.

Use Only for Intended Applications

All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization
The chapters in this Product Guide are arranged as follows: 1 2 3 A B Desktop Board Features: a summary of product features Installing and Replacing Desktop Board Components: instructions on how to install the Desktop Board and other hardware components Updating the BIOS: instructions on how to update the BIOS Error Messages and Indicators: information about BIOS error messages and beep codes Regulatory Compliance: describes the boards adherence to safety standards and EMC regulations and its product certifications

Conventions
The following conventions are used in this manual:

CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE
Notes call attention to important information.

iii

Intel Desktop Board DN2800MT Product Guide

Terminology
The table below gives descriptions of some common terms used in the product guide.
Term GB GHz KB MB Mb MHz Description Gigabyte (1,073,741,824 bytes) Gigahertz (one billion hertz) Kilobyte (1024 bytes) Megabyte (1,048,576 bytes) Megabit (1,048,576 bits) Megahertz (one million hertz)

iv

Contents
1 Desktop Board Features
Feature Summary ................................................................................................. 9 Supported Operating Systems .............................................................................. 11 Desktop Board Components.................................................................................. 12

2 Installing and Replacing Desktop Board Components

Before You Begin................................................................................................. 15 Installation Precautions ........................................................................................ 16 Prevent Power Supply Overload ..................................................................... 16 Observe Safety and Regulatory Requirements ................................................. 16 Installing the I/O Shield ....................................................................................... 17 Installing and Removing the Desktop Board ............................................................ 18 Installing System Memory .................................................................................... 19 Connecting to SATA Drives ................................................................................... 22 Installing a PCI Express Mini Card in the PCI Express Full-/Half-Mini Card Slot ............ 24 Installing a PCI Express Mini Card in the PCI Express Half-Mini Card Slot ................... 26 Installing an Intel Z-U130 USB Solid-State Drive or Compatible Device .................... 27 Connecting to the Internal Headers and Connectors................................................. 29 S/PDIF Header ............................................................................................ 30 Internal Stereo Speakers Connector ............................................................... 30 Serial Port Headers ...................................................................................... 30 Parallel Port Header ..................................................................................... 31 Front Panel Header ...................................................................................... 31 Front Panel Audio Header ............................................................................. 32 Front Panel USB 2.0 Header .......................................................................... 32 Front Panel USB 2.0 Header (with Flash Drive Support) .................................... 33 DMIC Header .............................................................................................. 33 Custom Solutions Header.............................................................................. 34 Connecting a System Fan ..................................................................................... 34 Connecting to a Power Supply............................................................................... 35 Setting the BIOS Configuration Jumper .................................................................. 37 Clearing Passwords.............................................................................................. 38 Replacing the Battery .......................................................................................... 39

3 Updating the BIOS

Updating the BIOS with the Intel Express BIOS Update Utility ................................. 45 Updating the BIOS Using the F7 Function Key ......................................................... 46 Updating the BIOS with the Intel Flash Memory Update Utility ................................ 46 Recovering the BIOS ........................................................................................... 47 Front-panel Power LED Blink and Speaker Beep Codes ............................................. 49 BIOS Error Messages ........................................................................................... 50

A Error Messages and Indicators

B Regulatory Compliance
Safety Standards ................................................................................................ 51 Battery Caution ........................................................................................... 51 European Union Declaration of Conformity Statement .............................................. 52

Intel Desktop Board DN2800MT Product Guide

Product Ecology Statements ................................................................................. 53 Recycling Considerations .............................................................................. 53 China RoHS ................................................................................................ 56 EMC Regulations ................................................................................................. 57 FCC Declaration of Conformity....................................................................... 57 Canadian Department of Communications Compliance Statement ...................... 58 Japan VCCI Statement ................................................................................. 58 Korea Class B Statement .............................................................................. 59 Ensure Electromagnetic Compatibility (EMC) Compliance .................................. 59 Product Certifications ........................................................................................... 60 Board-Level Certifications ............................................................................. 60 Chassis- and Component-Level Certifications .................................................. 61 ENERGY STAR*, e-Standby, and ErP Compliance ..................................................... 61

Figures
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Intel Desktop Board DN2800MT Components (Top) ............................................ 12 Intel Desktop Board DN2800MT Components (Bottom)....................................... 14 Installing an I/O Shield .................................................................................. 17 Intel Desktop Board DN2800MT Mounting Screw Hole Locations .......................... 18 Installing an SO-DIMM ................................................................................... 20 Removing an SO-DIMM .................................................................................. 21 Connecting the SATA Data and Power Cables .................................................... 23 Installing a PCI Express Mini Card in the Full-/Half-Mini Card Slot ........................ 25 Installing a PCI Express Mini Card in the Half-Mini Card Slot ............................... 26 Installing an Intel Z-U130 USB Solid-State Drive (or Compatible Device) .............. 28 Internal Headers and Connectors ..................................................................... 29 Location of the Chassis Fan Header .................................................................. 34 Power Supply Connections .............................................................................. 35 Location of the BIOS Configuration Jumper Block ............................................... 37 Removing and Replacing the Battery ................................................................ 44 Intel Desktop Board DN2800MT China RoHS Material Self Declaration Table.......... 56

vi

Contents

Tables
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Intel Desktop Board DN2800MT Features ............................................................ 9 Intel Desktop Board DN2800MT Components (Shown in Figure 1) ....................... 13 Intel Desktop Board DN2800MT Components (Bottom) (Shown in Figure 2) ......... 14 S/PDIF Header Signal Names .......................................................................... 30 Internal Stereo Speakers Connector Signal Names............................................. 30 Serial Port Header ......................................................................................... 30 Parallel Port Header ....................................................................................... 31 Front Panel Header Signal Names .................................................................... 31 Front Panel Audio Signal Names for Intel HD Audio ............................................ 32 Front Panel Audio Header Signal Names for AC 97 Audio.................................... 32 Front Panel Dual-Port USB 2.0 Header Signal Names.......................................... 32 Front Panel Dual-Port USB 2.0 Header (with Flash Drive Support) Signal Names ................................................................................................ 33 DMIC Header Signal Names ............................................................................ 33 Custom Solutions Header Signal Names ........................................................... 34 Jumper Settings for the BIOS Setup Program Modes .......................................... 38 BIOS Front-panel Power LED Blink Codes.......................................................... 49 BIOS Speaker Beep Codes .............................................................................. 50 BIOS Error Messages ..................................................................................... 50 Safety Standards ........................................................................................... 51 EMC Regulations ............................................................................................ 57 Regulatory Compliance Marks ......................................................................... 60

vii

Intel Desktop Board DN2800MT Product Guide

viii

1 Desktop Board Features

This chapter briefly describes the features of Intel Desktop Board DN2800MT. Table 1 summarizes the major features of the Desktop Board. For a detailed description of Intel Desktop Board DN2800MT, refer to the Technical Product Specification at http://www.intel.com/Products/Desktop/Motherboards/dbDN2800MT/DN2800MT-technicaldocuments.htm.

Feature Summary
Table 1. Intel Desktop Board DN2800MT Features
Form Factor Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters [6.7 inches] x 170.18 millimeters [6.7 inches]) Fanlessly-cooled, soldered-down dual-core Intel Atom Processor N2800 with integrated graphics and memory controller Intel NM10 Express Chipset Two 204-pin Double Data Rate 3 (DDR3) Small Outline Dual Inline Memory Module (SO-DIMM) sockets Support for DDR3 800 MHz and DDR3 1066 MHz SO-DIMMs Note: Higher speed SO-DIMMs operate at 1066 MHz if supported by the memory module. Support for up to 4 GB of system memory on a single SO-DIMM (or two 2 GB SO-DIMMs) Graphics Integrated graphics: Digital displays (High Definition Multimedia Interface* (HDMI*)) Analog displays (VGA) Internal flat panel displays: LVDS Embedded DisplayPort* eDP* External graphics support via a PCI Express 1.0a x1 graphics add-in card connector continued

Processor
Chipset Memory

Intel Desktop Board DN2800MT Product Guide

Table 1. Feature Summary (continued)

Audio 2 + 2 Channel Intel High Definition Audio (Intel HD Audio) using a Realtek* ALC888S audio codec supporting: Analog stereo line-out (back panel jack) In-chassis stereo speakers support (3 W/3 via an internal header) S/PDIF digital audio output (internal header) DMIC digital microphone input (internal header) Analog line-in (back panel jack) Front panel Intel HD Audio/AC97 headphones/mic support (internal header)

8-channel (7.1) Intel HD Audio via the HDMI interface Expansion Capabilities Peripheral Interfaces One PCI Express 1.0a x1 add-in card connector One PCI Express Full-/Half-Mini Card slot One PCI Express Half-Mini Card slot Eight exposed USB 2.0 ports including: Four front panel ports (via two internal headers; one header supports an Intel Z-U130 USB Solid-State Drive (or compatible device)) Two ports are implemented with stacked back panel connectors (black) Two high-current/fast-charging ports implemented through stacked back panel connectors (yellow) One internal SATA 3.0 Gb/s port (Port 0, black) One internal SATA 3.0 Gb/s port (multiplexed with an mSATA port, routed to the PCI Express Full-/Half-Mini Card slot) (Port 1, gray)

Two SATA ports:

Legacy I/O

Legacy I/O Controller (Nuvoton* W83677DHG) that provides: Two serial ports via onboard headers One parallel port via an onboard header Hardware management support

LAN Support BIOS

Intel 82579L Gigabit (10/100/1000 Mb/s) Ethernet LAN controller including an RJ-45 back panel connector with integrated status LEDs Intel BIOS resident in a Serial Peripheral Interface (SPI) Flash device Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and System Management BIOS (SMBIOS)

Instantly Available PC Technology

Suspend to RAM support Wake on PCI Express, LAN, front panel, serial, and USB ports continued

10

Desktop Board Features

Table 1. Feature Summary (continued)

Hardware Management Nuvoton W83677DHG based subsystem, including: Voltage sense to detect out of range power supply voltages Thermal sense to detect out of range thermal values One 3-pin system fan header with speed control Support for Platform Environmental Control Interface (PECI)

Supported Operating Systems

For the latest information on operating system support refer to the Intel Desktop Board DN2800MT web page at http://www.intel.com/products/motherboard/index.htm.

11

Intel Desktop Board DN2800MT Product Guide

Desktop Board Components

Figure 1 shows the approximate location of the major components on the top side of Intel Desktop Board DN2800MT.

Figure 1. Intel Desktop Board DN2800MT Components (Top)

12

Desktop Board Features

Table 2. Intel Desktop Board DN2800MT Components (Shown in Figure 1)

Label A B C D E F G H I J K L M N O P Q R S T U V W X Y Z AA BB CC DD EE Description Battery Back panel connectors System fan header Internal DC power connector Intel NM10 Express Chipset BIOS configuration jumper block SATA 3.0 Gb/s Port 1 connector SATA power connector PCI Express Half-Mini Card slot SATA 3.0 Gb/s Port 0 connector Intel Atom processor with fanless heat sink LVDS connector FPD brightness connector Flat Panel voltage selection header Backlight inverter voltage selection header DDR3 SO-DIMM 0 socket DDR3 SO-DIMM 1 socket Front panel header Front panel audio header Front panel USB 2.0 header Front panel USB 2.0 header (with flash drive support) Standby power indicator LED Serial port header (COM1) Serial port header (COM2) Parallel port header DMIC header PCI Express Full-/Half-Mini Card slot Custom solutions header PCI Express 1.0a x1 add-in card connector S/PDIF header Internal stereo speakers connector

13

Intel Desktop Board DN2800MT Product Guide

Figure 2. Intel Desktop Board DN2800MT Components (Bottom) Table 3. Intel Desktop Board DN2800MT Components (Bottom) (Shown in Figure 2)
Label A Description eDP connector

Online Support For more information on Intel Desktop Board DN2800MT, consult the following online resources:
Intel Desktop Board DN2800MT Desktop Board Support Available configurations for Intel Desktop Board DN2800MT Compatible processors Processor specifications Chipset information BIOS and driver updates http://www.intel.com/products/desktop/motherboard/ index.htm http://www.intel.com/p/en_US/support?iid=hdr+supp ort http://ark.intel.com http://processormatch.intel.com http://www.intel.com/products/desktop/processors/in dex.htm http://www.intel.com/products/desktop/chipsets/inde x.htm http://downloadcenter.intel.com/

14

2 Installing and Replacing Desktop Board Components

This chapter tells you how to: Install the I/O shield Install and remove the Desktop Board Install and remove a processor Install and remove system memory Connect to SATA drives Install a PCI Express Mini Card Install an Intel Z-U130 USB Solid-State Drive or Compatible Device Connect to the internal headers and connectors Connect a system fan Connect a power supply Set the BIOS configuration jumper Clear passwords Replace the battery

Before You Begin

CAUTION
The procedures in this chapter assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment. Disconnect the computer from its power source and from any telecommunications links, networks, or modems before performing any of the procedures described in this chapter. Failure to disconnect power, telecommunications links, networks, or modems before you open the computer or perform any procedures can result in personal injury or equipment damage. Some circuitry on the board can continue to operate even though the front panel power button is off. Follow these guidelines before you begin: Always follow the steps in each procedure in the correct order. Set up a log to record information about your computer, such as model, serial numbers, installed options, and configuration information. Electrostatic discharge (ESD) can damage components. Perform the procedures described in this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam pad. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis.

15

Intel Desktop Board DN2800MT Product Guide

Installation Precautions
When you install and test the Intel Desktop Board, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: Sharp pins on connectors Sharp pins on printed circuit assemblies Rough edges and sharp corners on the chassis Hot components (such as processors, voltage regulators, and heat sinks) Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure that the calculated total current loads of all the modules within the computer is less than the output current rating of each of the power supplies output circuits plus enough headroom for desktop board power consumption. Refer to Section 2.5.1, Power Supply Considerations, of the Intel Desktop Board DN2800MT Technical Product Specification for power budget analysis guidance.

Observe Safety and Regulatory Requirements

Read and follow the instructions in this section and the instructions supplied with the chassis and associated modules. If you do not follow these instructions and the instructions provided by the chassis and module suppliers, you increase your safety risk and the possibility of noncompliance with regional laws and regulations. If the instructions for the chassis are inconsistent with these instructions or the instructions for associated modules, contact the supplier to find out how you can ensure that your computer meets safety and regulatory requirements. For information about the Desktop Boards regulatory compliance, refer to Appendix B.

16

Installing and Replacing Desktop Board Components

Installing the I/O Shield

This Desktop Board comes with I/O shields. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Select the proper I/O shield for the chassis you have chosen to use. Install the I/O shield before installing the Desktop Board in the chassis. Place the shield inside the chassis as shown in Figure 3. Press the shield into place so that it fits tightly and securely. If the shield does not fit, obtain a properly sized shield from the chassis supplier.

Figure 3. Installing an I/O Shield

17

Intel Desktop Board DN2800MT Product Guide

Installing and Removing the Desktop Board

CAUTION
Only qualified technical personnel should perform this procedure. Disconnect the computer from its power source before performing the procedures described here. Failure to disconnect the power before you open the computer can result in personal injury or equipment damage. Refer to your chassis manual for instructions on installing and removing the Desktop Board. Figure 4 shows the location of the mounting screw holes for Intel Desktop Board DN2800MT.

Figure 4. Intel Desktop Board DN2800MT Mounting Screw Hole Locations

18

Installing and Replacing Desktop Board Components

Installing System Memory

NOTE
To be fully compliant with all applicable Intel SDRAM memory specifications, the board requires SO-DIMMs that support the Serial Presence Detect (SPD) data structure. The desktop board has two 204-pin DDR3 SO-DIMM sockets supporting two memory modules on a single channel. To install an SO-DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 15. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computers cover and locate the DIMM sockets (see Figure 5). 4. Install the bottom SO-DIMM (Figure 5, A) first. Hold the SO-DIMM with the back edge tilted slightly upwards, insert it into the socket, aligning the notch in the SODIMM with the tab (Figure 5, B) in the socket. Gently push the back edge of the SO-DIMM down until it snaps into the retention arms (Figure 5, C). 5. If you are installing a second SO-DIMM, repeat Step 4 for the second SO-DIMM (Figure 5, D). 6. Replace the computers cover and reconnect the AC power cord.

NOTE
If you are installing only one SO-DIMM, it must be installed in the bottom socket (SO-DIMM 1) (see Figure 5, A).

19

Intel Desktop Board DN2800MT Product Guide

Figure 5. Installing an SO-DIMM

20

Installing and Replacing Desktop Board Components

To remove an SO-DIMM from the socket, gently spread the sockets retention arms as shown in Figure 6 to disengage them from the SO-DIMM.

Figure 6. Removing an SO-DIMM

21

Intel Desktop Board DN2800MT Product Guide

Connecting to SATA Drives

Intel Desktop Board DN2800MT supports two SATA drives with two data connectors and one power connector. To enable low-profile connectivity, the board ships with two SATA data cables with right-angled connectors and an in-line power cable that provides: a right-angled female-gender 15-pin SATA power connector for low-profile board connectivity a female-gender 1 x 4 Molex-type power connector for system component power flexibility a 15-pin female-gender SATA power connector for SATA drive power a vertical 15-pin female-gender SATA power connector for SATA drive power

NOTE
If you install an mSATA drive in the boards PCI Express Full-/Half-Mini Card slot, SATA port 1 (gray) will be disabled. To connect a SATA drive to the Desktop Board: 1. Observe the precautions in "Before You Begin" on page 15. 2. Attach the right angled connector on the SATA data cable to one of the SATA connectors on the board (Figure 7, A). 3. Attach the other end of the SATA data cable to the SATA drive (Figure 7, B). 4. Attach the right-angled 15-pin SATA power connector on the power cable to the 15-pin SATA power connector on the Desktop Board (Figure 7, C). 5. Attach the 15-pin SATA power connector (Figure 7, D) on the end of the power cable to the mating connector on a SATA drive.

22

Installing and Replacing Desktop Board Components

Figure 7. Connecting the SATA Data and Power Cables

23

Intel Desktop Board DN2800MT Product Guide

Installing a PCI Express Mini Card in the PCI Express Full-/Half-Mini Card Slot
A PCI Express Full-Mini or Half-Mini Card can be installed in the Desktop Boards PCI Express Full-/Half-Mini Card slot. To install a PCI Express Full-Mini Card in this slot, see Figure 8 and follow these steps: 1. Observe the precautions in "Before You Begin" on page 15. 2. Locate the PCI Express Full-/Half-Mini Card slot (Figure 1, AA). 3. Insert the card into the PCI Express Mini Card connector (Figure 8, A) at a slightly upward angle. 4. Align the mounting holes and secure the card in place (Figure 8, B). To install a PCI Express Half-Mini Card in this slot, see Figure 8 and follow these steps: 1. 2. 3. 4. Observe the precautions in "Before You Begin" on page 15. Locate the PCI Express Full-/Half-Mini Card slot (Figure 1, AA). If necessary, move the mounting standoffs to the location shown in Figure 8, C. Insert the card into the PCI Express Mini Card connector (Figure 8, D) at a slightly upward angle. 5. Align the mounting holes and secure the card in place (Figure 8, E).

24

Installing and Replacing Desktop Board Components

Figure 8. Installing a PCI Express Mini Card in the Full-/Half-Mini Card Slot

25

Intel Desktop Board DN2800MT Product Guide

Installing a PCI Express Mini Card in the PCI Express Half-Mini Card Slot
A PCI Express Half-Mini Card can be installed in the Desktop Boards PCI Express Half-Mini Card slot. To install a PCI Express card in this slot, see Figure 9 and follow these steps: 1. Observe the precautions in "Before You Begin" on page 15. 2. Locate the PCI Express Half-Mini Card slot (Figure 1, I). 3. Insert the card into the PCI Express Mini Card connector (Figure 9, A) at a slightly upward angle. 4. Align the mounting holes and secure the card in place (Figure 9, B).

Figure 9. Installing a PCI Express Mini Card in the Half-Mini Card Slot

26

Installing and Replacing Desktop Board Components

Installing an Intel Z-U130 USB Solid-State Drive or Compatible Device

An Intel Z-U130 USB Solid-State Drive or compatible device can be installed on the Desktop Board by using the onboard USB 2.0 header shown in Figure 1, U. This header provides support for the solid-state drive. To install an Intel Z-U130 USB Solid-State Drive or compatible device on the Desktop Board, follow these steps: 1. Observe the precautions in "Before You Begin" on page 15. 2. Align the connector (Figure 10, A) on the bottom of the solid state drive with the USB 2.0 header on the Desktop Board. The connectors are keyed and will mate correctly when the solid state drive is oriented as shown in Figure 10. 3. Secure the solid state drive to the Desktop Board with the provided screw (Figure 10, B).

27

Intel Desktop Board DN2800MT Product Guide

Figure 10. Installing an Intel Z-U130 USB Solid-State Drive (or Compatible Device)

28

Installing and Replacing Desktop Board Components

Connecting to the Internal Headers and Connectors

Before connecting cables to any of the internal headers and connectors, observe the precautions in Before You Begin on page 15. Figure 11 shows the location of the internal headers and connectors on Intel Desktop Board DN2800MT.

Figure 11. Internal Headers and Connectors

29

Intel Desktop Board DN2800MT Product Guide

S/PDIF Header
Figure 11, A shows the location of the S/PDIF output header. Table 13 shows the pin assignments and signal names for the S/PDIF output header. Table 4. S/PDIF Header Signal Names
Pin 1 2 3 4 Description Ground S/PDIF Out Key (no pin) +5 VDC

Internal Stereo Speakers Connector

Figure 11, B shows the location of the internal stereo speakers connector and Table 5 shows the pin assignments and signal names. Table 5. Internal Stereo Speakers Connector Signal Names
Pin 1 2 3 4 Signal Name Front_L Front_L+ Front_R+ Front_R

Serial Port Headers

Figure 11, C shows the location of the serial port headers. Table 6 shows the pin assignments and signal names for each serial port header. Table 6. Serial Port Header
Pin 1 3 5 7 9 Signal Name DCD (Data Carrier Detect) TXD# (Transmit Data) Ground RTS (Request To Send) RI (Ring Indicator) Pin 2 4 6 8 10 Signal Name RXD# (Receive Data) DTR (Data Terminal Ready) DSR (Data Set Ready) CTS (Clear To Send) Key (no pin)

30

Installing and Replacing Desktop Board Components

Parallel Port Header

Figure 11, D shows the location of the parallel port header. Table 7 shows the pin assignments and signal names for the parallel port header. Table 7. Parallel Port Header
Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 Signal Name STROBE# PD0 PD1 PD2 PD3 PD4 PD5 PD6 PD7 ACK# BUSY FAULT# SELECT Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 Signal Name AUTOFD# PERROR INT# SLCTIN# Ground Ground Ground Ground Ground Ground Ground Ground Key (no pin)

Front Panel Header

Figure 11, E shows the location of the front panel header. Table 8 shows the pin assignments and signal names for the front panel header. Table 8. Front Panel Header Signal Names
Pin 1 3 5 7 9 Description Hard Drive Activity LED Hard disk LED pull-up to +5 V Out Hard disk active LED Reset Switch Ground Reset switch Power Power (+5 V DC) Out 10 No pin In 6 8 Ground Not Connected Out 2 4 In/Out Pin Description Power LED Front panel LED+ Front panel LEDOn/Off Switch Power switch In Out Out In/Out

NOTE
When connecting individual wires from your chassis front panel to the front panel header, be sure to observe the connection polarity. Positive wires are usually solid color and negative wires are usually white or striped.

31

Intel Desktop Board DN2800MT Product Guide

Front Panel Audio Header

The front panel audio header shown in Figure 11, F supports both Intel HD Audio and AC 97 Audio. Table 9 shows the pin assignments and signal names for Intel HD Audio and Table 10 shows the pin assignments and signal names for AC 97 Audio. Table 9. Front Panel Audio Signal Names for Intel HD Audio
Pin 1 3 5 7 9 Signal Name PORT 1L (Microphone) PORT 1R (Microphone) PORT 2R (Headphone) SENSE_SEND PORT 2L (Headphone) Pin 2 4 6 8 10 Signal Name GND PRESENCE# SENSE1_RETURN KEY (no pin) SENSE2_RETURN

Table 10. Front Panel Audio Header Signal Names for AC 97 Audio
Pin 1 3 5 7 9 Signal Name MIC MIC_BIAS FP_OUT_R No Connection FP_OUT_L Pin 2 4 6 8 10 Signal Name AUD_GND PRESENCE# AUD_GND KEY (no pin) AUD_GND

Front Panel USB 2.0 Header

Figure 11, G shows the location of the standard front panel dual-port USB 2.0 header and Table 11 shows the pin assignments and signal names. Table 11. Front Panel Dual-Port USB 2.0 Header Signal Names
Pin 1 3 5 7 9 Signal Name Power (+5 V) DD+ Ground Key (no pin) Pin 2 4 6 8 10 Signal Name Power (+5 V) DD+ Ground No Connection

32

Installing and Replacing Desktop Board Components

Front Panel USB 2.0 Header (with Flash Drive Support)

Figure 11, H shows the location of the standard front panel dual-port USB 2.0 header and Table 12 shows the pin assignments and signal names. Table 12. Front Panel Dual-Port USB 2.0 Header (with Flash Drive Support) Signal Names
Pin 1 3 5 7 9 Signal Name Power (+5 V) DD+ Ground Key (no pin) Pin 2 4 6 8 10 Signal Name Power (+5 V) DD+ Ground LED#

NOTE
Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low-speed USB device is attached to the cable. Use a shielded cable that meets the requirements for a full-speed USB device.

DMIC Header
Figure 11, I shows the location of the DMIC header. Table 13 shows the pin assignments and signal names for the DMIC header. Table 13. DMIC Header Signal Names
Pin 1 2 3 4 5 Description 3.3 V DMIC_DATA Ground DMIC_CLK Key (no pin)

33

Intel Desktop Board DN2800MT Product Guide

Custom Solutions Header

Figure 11, J shows the location of the Custom Solutions header and Table 14 shows the pin assignments and signal names. Table 14. Custom Solutions Header Signal Names
Pin 1 3 5 7 Signal Name WDTO# No Connection +3.3 V PWRBT# Pin 2 4 6 8 Signal Name Ground SMB_CLK_RESUME SMB_DATA_RESUME CEC

Connecting a System Fan

You can connect a 3-wire system fan cable to the system fan header on the Desktop Board as shown in Figure 12.

Figure 12. Location of the Chassis Fan Header

34

Installing and Replacing Desktop Board Components

Connecting to a Power Supply

The board supports a wide range of input voltages from either of the following power supply types: External Power Supply the board can be powered with an 8-19 V DC external power supply though the DC jack on the back panel (Figure 13, A). This connector accepts dual-barrel plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +8 V DC (10 %) through +19 V DC (10 %) and the shell is Ground. The maximum current rating for this connector is 8 A. Internal Power Supply the board can alternatively be powered through the internal 1 x 2 power connector (Figure 13, B), where pin 1 is Ground and pin 2 is +8 V DC (10 %) through +19 V DC (10 %). The maximum current rating for this connector is 10 A.

Use of an external power supply is preferred. Total power consumption depends on the system configuration selected by the integrator. Refer to the Intel Desktop Board DN2800MT Technical Product Specification for further guidance.

Figure 13. Power Supply Connections

35

Intel Desktop Board DN2800MT Product Guide

CAUTION
The external power jack is the primary power input connector of Intel Desktop Board DN2800MT. However, the Desktop Board also provides an internal 1 x 2 power connector that can used be with a target system that already has an internal power supply. There is no isolation circuitry between the external power jack and the internal 1 x 2 power connector. It is the system integrators responsibility to ensure that no more than one power supply unit is or can be attached to the board at any time and to ensure that the external power jack is covered if the internal 1 x 2 power connector is to be used. A plastic cover is shipped with the Desktop Board for this purpose. Simultaneous connection of both external and internal power supply units may result in damage to the desktop board, power supplies, or other hardware.

36

Installing and Replacing Desktop Board Components

Setting the BIOS Configuration Jumper

NOTE
Always turn off the power and unplug the power cord from the computer before moving the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 14 shows the location of the Desktop Boards BIOS configuration jumper block.

Figure 14. Location of the BIOS Configuration Jumper Block

37

Intel Desktop Board DN2800MT Product Guide

The three-pin BIOS jumper block enables board configuration to be done in the BIOS Setup program. Table 15 shows the jumper settings for the BIOS Setup program modes. Table 15. Jumper Settings for the BIOS Setup Program Modes
Jumper Setting 1-2 2-3 Mode Normal (default) Configure Description The BIOS uses the current configuration and passwords for booting. After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. The BIOS recovers data in the event of a failed BIOS update.

None

Recovery

Clearing Passwords
This procedure assumes that the board is installed in the computer and the configuration jumper block is set to normal mode. 1. Observe the precautions in "Before You Begin" on page 15. 2. Turn off all peripheral devices connected to the computer. Turn off the computer. Disconnect the computers power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Find the configuration jumper block (see Figure 14). 5. Place the jumper on pins 2-3. 6. Replace the cover, plug in the computer, turn on the computer, and allow it to boot. 7. The computer starts the Setup program. Setup displays the Maintenance menu. 8. Use the arrow keys to select Clear Passwords. Press the Enter key and Setup displays a pop-up screen requesting that you confirm clearing the password. Select Yes and press the Enter key. Setup displays the maintenance menu again. 9. Press the F10 key to save the current values and exit Setup. 10. Turn off the computer. Disconnect the computers power cord from the AC power source. 11. Remove the computer cover. 12. To restore normal operation, place the jumper on pins 1-2. 13. Replace the cover, plug in the computer, and turn on the computer.

38

Installing and Replacing Desktop Board Components

Replacing the Battery

A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to 13 minutes/year at 25 C with 3.3 VSB applied. When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and time) might not be accurate. Replace the battery with an equivalent one. Figure 15 on page 44 shows the location of the battery.

CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.

PRCAUTION
Risque d'explosion si la pile usage est remplace par une pile de type incorrect. Les piles usages doivent tre recycles dans la mesure du possible. La mise au rebut des piles usages doit respecter les rglementations locales en vigueur en matire de protection de l'environnement.

FORHOLDSREGEL
Eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. Batterier br om muligt genbruges. Bortskaffelse af brugte batterier br foreg i overensstemmelse med gldende miljlovgivning.

OBS!
Det kan oppst eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier br kastes i henhold til gjeldende miljlovgivning.

VIKTIGT!
Risk fr explosion om batteriet erstts med felaktig batterityp. Batterier ska kasseras enligt de lokala miljvrdsbestmmelserna.

VARO
Rjhdysvaara, jos pariston tyyppi on vr. Paristot on kierrtettv, jos se on mahdollista. Kytetyt paristot on hvitettv paikallisten ympristmrysten mukaisesti.

39

Intel Desktop Board DN2800MT Product Guide

VORSICHT
Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend.

AVVERTIMENTO
Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per disfarsi delle pile usate, seguire le istruzioni del produttore.

PRECAUCIN
Existe peligro de explosin si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante.

WAARSCHUWING
Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled. Houd u bij het weggooien van gebruikte batterijen aan de plaatselijke milieuwetgeving.

ATENO
Haver risco de exploso se a bateria for substituda por um tipo de bateria incorreto. As baterias devem ser recicladas nos locais apropriados. A eliminao de baterias usadas deve ser feita de acordo com as regulamentaes ambientais da regio.

ACIAROZNA
, . , , . .

UPOZORNN
V ppad vmny baterie za nesprvn druh me dojt k vbuchu. Je-li to mon, baterie by mly bt recyklovny. Baterie je teba zlikvidovat v souladu s mstnmi pedpisy o ivotnm prosted.

40

Installing and Replacing Desktop Board Components

. . .

VIGYZAT
Ha a telepet nem a megfelel tpus telepre cserli, az felrobbanhat. A telepeket lehetsg szerint jra kell hasznostani. A hasznlt telepeket a helyi krnyezetvdelmi elrsoknak megfelelen kell kiselejtezni.

AWAS
Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan.

OSTRZEENIE
Istnieje niebezpieczestwo wybuchu w przypadku zastosowania niewaciwego typu baterii. Zuyte baterie naley w miar moliwoci utylizowa zgodnie z odpowiednimi przepisami ochrony rodowiska.

PRECAUIE
Risc de explozie, dac bateria este nlocuit cu un tip de baterie necorespunztor. Bateriile trebuie reciclate, dac este posibil. Depozitarea bateriilor uzate trebuie s respecte reglementrile locale privind protecia mediului.

. . , .

41

Intel Desktop Board DN2800MT Product Guide

UPOZORNENIE
Ak batriu vymente za nesprvny typ, hroz nebezpeenstvo jej vbuchu. Batrie by sa mali poda monosti vdy recyklova. Likvidcia pouitch batri sa mus vykonva v slade s miestnymi predpismi na ochranu ivotnho prostredia.

POZOR
Zamenjava baterije z baterijo druganega tipa lahko povzroi eksplozijo. e je mogoe, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi okoljevarstvenimi predpisi.

UYARI
Yanl trde pil takldnda patlama riski vardr. Piller mmkn olduunda geri dntrlmelidir. Kullanlm piller, yerel evre yasalarna uygun olarak atlmaldr.

O
, . , . , .

42

Installing and Replacing Desktop Board Components

To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 15). 2. Turn off all peripheral devices connected to the computer. Disconnect the computers power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 15). 5. Disconnect the battery cable from the Desktop Board battery connector (Figure 15, A). 6. Lift up on the battery (Figure 15, B) and carefully remove it from the board. It is attached to the board by a non-permanent adhesive pad. 7. To install a new battery, connect the battery cable to the Desktop Board battery connector (Figure 15, E), remove the protective covering (Figure 15, C) from the adhesive pad on the back of the new battery, and reattach the battery to the board (Figure 15, D) or the inside of the system chassis. 8. Replace the computer cover.

43

Intel Desktop Board DN2800MT Product Guide

Figure 15. Removing and Replacing the Battery

44

3 Updating the BIOS

The BIOS Setup program can be used to view and change the BIOS settings for the computer. You can access the BIOS Setup program by pressing the F2 key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. This chapter tells you how to update the BIOS by either using the Intel Express BIOS Update utility or the Intel Flash Memory Update Utility, and how to recover the BIOS if an update fails.

Updating the BIOS with the Intel Express BIOS Update Utility
With the Intel Express BIOS Update utility you can update the system BIOS while in the Windows environment. The BIOS file is included in an automated update utility that combines the functionality of the Intel Flash Memory Update Utility and the ease of use of Windows-based installation wizards. To update the BIOS with the Intel Express BIOS Update utility: 1. Go to the Intel World Wide Web site Download Center at http://downloadcenter.intel.com/ 2. Navigate to the DN2800MT page. Click on the BIOS Update link and then select the Express BIOS Update file. 3. Download the file to your hard drive. (You can also save this file to a removable USB device. This is useful if you are updating the BIOS for multiple identical systems.) 4. Close all other applications. This step is required. Your system will be rebooted at the last Express BIOS Update window. 5. Double-click the executable file from the location on your hard drive where it was saved. This runs the update program. 6. Follow the instructions provided in the dialog boxes to complete the BIOS update.

45

Intel Desktop Board DN2800MT Product Guide

Updating the BIOS Using the F7 Function Key

To use this BIOS update method: Download and save the Recovery BIOS (.BIO) file to a temporary directory. Copy the .BIO file to a USB thumb drive. Plug the thumb drive into a USB port of the target computer. Shut down the target computer. Enable the F7 prompt display: a. Power the computer on. b. Enter the BIOS Setup by pressing the F2 key during boot. c. Go to the Advanced > Boot Configuration menu. d. Enable Display F7 to Update BIOS e. Press the F10 key to save and exit. 6. During boot, when the F7 prompt is displayed, press the F7 key to enter the BIOS Flash Update tool. 7. Select the USB thumb drive and press Enter. 8. Select the .BIO file and press Enter 9. Confirm you want to update the BIOS by pressing Enter. 10. Wait 2-5 minutes for the update to complete. 11. Remove the thumb drive. 12. Restart the computer. 1. 2. 3. 4. 5.

Updating the BIOS with the Intel Flash Memory Update Utility
You can use the information in this section to update the BIOS using the Intel Flash Memory Update Utility. With the Intel Flash Memory Update Utility you can update the system BIOS from a bootable CD-ROM, bootable USB flash drive, or other bootable USB media. You can update to a new version of the BIOS by using the Intel Flash Memory BIOS update file. The Intel Flash Memory BIOS update file is a compressed file that contains the files you need to update the BIOS. The BIOS update file contains: New BIOS file (including the Intel Management Engine (Intel ME) Firmware Image) Intel Integrator Toolkit Configuration File (optional) Intel Flash Memory Update Utility

You can obtain this file through your computer supplier or by navigating to the Intel Desktop Board DN2800MT page on the Intel World Wide Web site Download Center at http://downloadcenter.intel.com. On the DN2800MT page, click on the BIOS Update link and then select the Iflash BIOS Update file.

46

Updating the BIOS

NOTE
Review the instructions distributed with the update utility before attempting a BIOS update.

CAUTION
Do not interrupt the process or the system may not function properly. 1. Uncompress the BIOS update file and copy the .BIO file, IFLASH2.EXE, and .ITK file (optional) to a bootable USB flash drive or other bootable USB media. 2. Configure the BIOS or use the F10 key option during POST to boot to the USB device. 3. Manually run the IFLASH2.EXE file from the USB device and manually update the BIOS.

CAUTION
DO NOT POWER DOWN YOUR COMPUTER before the update is complete. The update may take up to 5 minutes.

Recovering the BIOS

It is unlikely that anything will interrupt the BIOS update; however, if an interruption occurs, the BIOS could be damaged. Due to BIOS size and recovery requirements, a CD-R with the .BIO file in the root directory will be required. You can obtain the Recovery BIOS Update file through your computer supplier or by navigating to the Intel Desktop Board DN2800MT page on the Intel World Wide Web site Download Center at http://downloadcenter.intel.com. On the DN2800MT page, click on the BIOS Update link and then select the Recovery BIOS Update file.

NOTE
For more information about updating the Intel Desktop Board BIOS or recovering from a BIOS update failure, go to http://support.intel.com/support/motherboards/desktop/sb/CS-022312.htm.

47

Intel Desktop Board DN2800MT Product Guide

48

A Error Messages and Indicators

This appendix describes error messages generated by the Desktop Boards BIOS. The BIOS indicates these error messages with LED blink codes, speaker beep codes, and by text displayed on the PC monitor.

Front-panel Power LED Blink and Speaker Beep Codes

Whenever a recoverable error occurs during POST, the BIOS provides basic status and error messages through front-panel power LED blink codes (Table 16) as well as through audible beep codes (Table 17). Table 16. BIOS Front-panel Power LED Blink Codes
Type BIOS update in progress Video error Pattern Off when the update begins, then on for 0.5 second, then off for 0.5 second. The pattern repeats until the BIOS update is complete. On-off (0.5 second each) two times, then a 3.0-second pause (off), the entire pattern repeats (blink and pause) until the system is powered off. On-off (0.5 second each) three times, then a 3.0-second pause (off), the entire pattern repeats (blinks and pause) until the system is powered off. Each beep will be accompanied by the following blink pattern: .25 seconds on, .25 seconds off, .25 seconds on, .25 seconds off. This results in a total of 32 blinks.

Memory error

Thermal trip warning

49

Intel Desktop Board DN2800MT Product Guide

Table 17. BIOS Speaker Beep Codes

Type Video error Pattern On-off (1.0 second each) two times, then a 2.5-second pause (off), the entire pattern repeats (beeps and pause) once and the BIOS will continue to boot. Frequency/Comments 932 Hz

Memory error

On-off (1.0 second each) three times, then 932 Hz a 2.5-second pause (off), the entire pattern repeats (beeps and pause) until the system is powered off. Alternate high and low beeps (1.0 second each) for eight beeps followed by system shut down. High beep 2000 Hz Low beep 1500 Hz

Thermal trip warning

BIOS Error Messages

The BIOS may also display an error message on the PC monitor when certain recoverable error occurs during POST. Table 18 gives an explanation of the BIOS error messages. Table 18. BIOS Error Messages
Error Message CMOS Battery Low CMOS Checksum Bad Memory Size Decreased No Boot Device Available Explanation The battery may be losing power. Replace the battery soon. The CMOS checksum is incorrect. CMOS memory may have been corrupted. Run Setup to reset values. Memory size has decreased since the last boot. If no memory was removed, then memory may be bad. System did not find a device to boot.

50

B Regulatory Compliance
This appendix contains the following regulatory compliance information for Intel Desktop Board DN2800MT: Safety standards European Union Declaration of Conformity statement Product Ecology statements Electromagnetic Compatibility (EMC) regulations Product certifications

Safety Standards
Intel Desktop Board DN2800MT complies with the safety standards stated in Table 19 when correctly installed in a compatible host system. Table 19. Safety Standards
Regulation CSA/UL 60950-1 EN 60950-1 IEC 60950-1 Title Information Technology Equipment Safety - Part 1: General Requirements (USA and Canada) Information Technology Equipment Safety - Part 1: General Requirements (European Union) Information Technology Equipment Safety - Part 1: General Requirements (International)

Battery Caution
There is insufficient space on this Desktop Board to provide instructions for replacing and disposing of the Lithium ion coin cell battery. For system safety certification, the statement below or an equivalent statement is required to be permanently and legibly marked on the chassis near the battery. A suitable caution label is included with Intel Desktop Board DN2800MT.

CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. For information about replacing the battery, go to page 39.

51

Intel Desktop Board DN2800MT Product Guide

European Union Declaration of Conformity Statement

We, Intel Corporation, declare under our sole responsibility that the product Intel Desktop Board DN2800MT is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directives 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC (ROHS Directive). The product is properly CE marked demonstrating this conformity and is for distribution within all member states of the EU with no restrictions.

This product follows the provisions of the European Directives 2004/108/EC, 2006/95/EC and 2002/95/EC. etina Tento vrobek odpovd poadavkm evropskch smrnic 2004/108/EC, 2006/95/EC a 2002/95/EC. Dansk Dette produkt er i overensstemmelse med det europiske direktiv 2004/108/EC, 2006/95/EC & 2002/95/EC. Dutch Dit product is in navolging van de bepalingen van Europees Directief 2004/108/EC, 2006/95/EC & 2002/95/EC. Eesti Antud toode vastab Euroopa direktiivides 2004/108/EC, ja 2006/95/EC ja 2002/95/EC kehtestatud nuetele. Suomi Tm tuote noudattaa EU-direktiivin 2004/108/EC, 2006/95/EC & 2002/95/EC mryksi. Franais Ce produit est conforme aux exigences de la Directive Europenne 2004/108/EC, 2006/95/EC & 2002/95/EC. Deutsch Dieses Produkt entspricht den Bestimmungen der Europischen Richtlinie 2004/108/EC, 2006/95/EC & 2002/95/EC. 2004/108/EC, 2006/95/EC 2002/95/EC. Magyar E termk megfelel a 2004/108/EC, 2006/95/EC s 2002/95/EC Eurpai Irnyelv elrsainak. Icelandic essi vara stenst regluger Evrpska Efnahags Bandalagsins nmer 2004/108/EC, 2006/95/EC, & 2002/95/EC. Italiano Questo prodotto conforme alla Direttiva Europea 2004/108/EC, 2006/95/EC & 2002/95/EC. Latvieu is produkts atbilst Eiropas Direktvu 2004/108/EC, 2006/95/EC un 2002/95/EC noteikumiem. Lietuvi is produktas atitinka Europos direktyv 2004/108/EC, 2006/95/EC, ir 2002/95/EC nuostatas. Malti Dan il-prodott hu konformi mal-provvedimenti tad-Direttivi Ewropej 2004/108/EC, 2006/95/EC u 2002/95/EC. Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2004/108/EC, 2006/95/EC & 2002/95/EC.

52

Regulatory Compliance

Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 2004/108/EC, 206/95/EC i 2002/95/EC. Portuguese Este produto cumpre com as normas da Diretiva Europia 2004/108/EC, 2006/95/EC & 2002/95/EC. Espaol Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v slade s ustanoveniami eurpskych direktv 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenina Izdelek je skladen z dolobami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC. Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC, 2006/95/EC & 2002/95/EC. Trke Bu rn, Avrupa Birliinin 2004/108/EC, 2006/95/EC ve 2002/95/EC ynergelerine uyar.

Product Ecology Statements

The following information is provided to address worldwide product ecology concerns and regulations.

Recycling Considerations
As part of its commitment to environmental responsibility, Intel has implemented the Intel Product Recycling Program to allow retail consumers of Intels branded products to return used products to selected locations for proper recycling. Please consult http://intel.com/intel/other/ehs/product_ecology for the details of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc. Intel Product Recycling Program http://intel.com/intel/other/ehs/product_ecology

53

Intel Desktop Board DN2800MT Product Guide

Deutsch Als Teil von Intels Engagement fr den Umweltschutz hat das Unternehmen das Intel Produkt-Recyclingprogramm implementiert, das Einzelhandelskunden von Intel Markenprodukten ermglicht, gebrauchte Produkte an ausgewhlte Standorte fr ordnungsgemes Recycling zurckzugeben. Details zu diesem Programm, einschlielich der darin eingeschlossenen Produkte, verfgbaren Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der http://intel.com/intel/other/ehs/product_ecology Espaol Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://intel.com/intel/other/ehs/product_ecology para ver los detalles del programa, que incluye los productos que abarca, los lugares disponibles, instrucciones de envo, trminos y condiciones, etc. Franais Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis en uvre le programme Intel Product Recycling Program (Programme de recyclage des produits Intel) pour permettre aux consommateurs de produits Intel de recycler les produits uss en les retournant des adresses spcifies. Visitez la page Web http://intel.com/intel/other/ehs/product_ecology pour en savoir plus sur ce programme, savoir les produits concerns, les adresses disponibles, les instructions d'expdition, les conditions gnrales, etc. http://intel.com/intel/other/ehs/product_ecology Malay Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran, Intel telah melaksanakan Program Kitar Semula Produk untuk membenarkan pengguna-pengguna runcit produk jenama Intel memulangkan produk terguna ke lokasi-lokasi terpilih untuk dikitarkan semula dengan betul. Sila rujuk http://intel.com/intel/other/ehs/product_ecology untuk mendapatkan butirbutir program ini, termasuklah skop produk yang dirangkumi, lokasi-lokasi tersedia, arahan penghantaran, terma & syarat, dsb.

54

Regulatory Compliance

Portuguese Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o Programa de Reciclagem de Produtos para que os consumidores finais possam enviar produtos Intel usados para locais selecionados, onde esses produtos so reciclados de maneira adequada. Consulte o site http://intel.com/intel/other/ehs/product_ecology (em Ingls) para obter os detalhes sobre este programa, inclusive o escopo dos produtos cobertos, os locais disponveis, as instrues de envio, os termos e condies, etc. Russian , Intel Intel (Product Recycling Program) Intel . , - http://intel.com/intel/other/ehs/product_ecology , , , , .. Trke Intel, evre sorumluluuna bamllnn bir paras olarak, perakende tketicilerin Intel markal kullanlm rnlerini belirlenmi merkezlere iade edip uygun ekilde geri dntrmesini amalayan Intel rnleri Geri Dnm Programn uygulamaya koymutur. Bu programn rn kapsam, rn iade merkezleri, nakliye talimatlar, kaytlar ve artlar v.s dahil btn ayrntlarn grenmek iin ltfen http://intel.com/intel/other/ehs/product_ecology web sayfasna gidin.

55

Intel Desktop Board DN2800MT Product Guide

China RoHS
Intel Desktop Board DN2800MT is a China RoHS-compliant product. The China Ministry of Information Industry (MII) stipulates that a material Self Declaration Table (SDT) must be included in a products user documentation. The SDT for Intel Desktop Board DN2800MT is shown in Figure 16.

Figure 16. Intel Desktop Board DN2800MT China RoHS Material Self Declaration Table

56

Regulatory Compliance

EMC Regulations
Intel Desktop Board DN2800MT complies with the EMC regulations stated in Table 20 when correctly installed in a compatible host system. Table 20. EMC Regulations
Regulation FCC 47 CFR Part 15, Subpart B ICES-003 EN55022 Title Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (USA) Interference-Causing Equipment Standard, Digital Apparatus. (Canada) Limits and methods of measurement of Radio Interference Characteristics of Information Technology Equipment. (European Union) Information Technology Equipment Immunity Characteristics Limits and methods of measurement. (European Union) Australian Communications Authority, Standard for Electromagnetic Compatibility. (Australia and New Zealand) Limits and methods of measurement of Radio Disturbance Characteristics of Information Technology Equipment. (International) Information Technology Equipment Immunity Characteristics Limits and Methods of Measurement. (International) Voluntary Control for Interference by Information Technology Equipment. (Japan) Korean Communications Commission Framework Act on Telecommunications and Radio Waves Act. (South Korea) Bureau of Standards, Metrology and Inspection. (Taiwan)

EN55024 EN55022 CISPR 22

CISPR 24 VCCI V-3, V-4 KN-22, KN-24 CNS 13438

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124 1-800-628-8686 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

57

Intel Desktop Board DN2800MT Product Guide

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the users authority to operate the equipment. Tested to comply with FCC standards for home or office use.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le prsent appareil numerique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le broullage radiolectrique dict par le ministre des Communications du Canada.

Japan VCCI Statement

Japan Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

58

Regulatory Compliance

Korea Class B Statement

Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration, so it can be used not only in residential areas, but also other areas.

Ensure Electromagnetic Compatibility (EMC) Compliance

Before computer integration, make sure that the power supply and other modules or peripherals, as applicable, have passed Class B EMC testing and are marked accordingly. Pay close attention to the following when reading the installation instructions for the host chassis, power supply, and other modules: Product certifications or lack of certifications External I/O cable shielding and filtering Mounting, grounding, and bonding requirements Keying connectors when mating the wrong connectors could be hazardous

If the power supply and other modules or peripherals, as applicable, are not Class B EMC compliant before integration, then EMC testing may be required on a representative sample of the newly completed computer.

59

Intel Desktop Board DN2800MT Product Guide

Product Certifications
Board-Level Certifications
Intel Desktop Board DN2800MT has the regulatory compliance marks shown in Table 21. Table 21. Regulatory Compliance Marks
Description UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. Mark

CE mark. Declaring compliance to European Union (EU) EMC directive, Low Voltage directive, and RoHS directive.

Australian Communications Authority (ACA) and New Zealand Radio Spectrum Management (NZ RSM) C-tick mark. Includes adjacent Intel supplier code number, N-232. Japan VCCI (Voluntary Control Council for Interference) mark.

Korea Certification mark. Includes an adjacent KCC (Korean Communications Commission) certification number: KCC-REM-CPU-DN2800MT. Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark. Includes adjacent Intel company number, D33025. Printed wiring board manufacturers recognition mark. Consists of a unique UL recognized manufacturers logo, along with a flammability rating (solder side). China RoHS/Environmentally Friendly Use Period Logo: This is an example of the symbol used on Intel Desktop Boards and associated collateral. The color of the mark may vary depending upon the application. The Environmental Friendly Usage Period (EFUP) for Intel Desktop Boards has been determined to be 10 years. V-0

60

Regulatory Compliance

Chassis- and Component-Level Certifications

Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used. Agency certification marks on the product are proof of certification. Typical product certifications include: In Europe The CE mark indicates compliance with all applicable European requirements. If the chassis and other components are not properly CE marked, a suppliers Declaration of Conformity statement to the European EMC directive, Low Voltage directive (as applicable), and ROHS directive, should be obtained. Additionally, other directives, such as the Radio and Telecommunications Terminal Equipment (R&TTE) directive may also apply depending on product features. In the United States A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL, CSA, or ETL signifies compliance with safety requirements. Wiring and cables must also be UL listed or recognized and suitable for the intended use. The FCC Class B logo for home or office use signifies compliance with electromagnetic interference (EMI) requirements. In Canada A nationally recognized certification mark such as CSA or cUL signifies compliance with safety requirements. The Industry Canada statement at the front of this product guide demonstrates compliance with Canadian EMC regulations.

ENERGY STAR*, e-Standby, and ErP Compliance

The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of the new requirements. This Desktop Board meets the ENERGY STAR Program for Computers: Version 5.0 Category A requirements. For information about ENERGY STAR requirements and recommended configurations, go to http://www.intel.com/go/energystar. The Desktop Board also meets the following international requirements: Republic of Korea e-Standby program European Union Energy using Products (ErP) Lot 6 directive

61

Intel Desktop Board DN2800MT Product Guide

62