Catalog 2005: Industrial Controllers
Catalog 2005: Industrial Controllers
Industrial Controllers
Catalog 2005
Industrial Controllers
CRANE CONTROL UNIT KST 4 swivelling manual adjustment Catalog 2/040
CRANE CONTROL UNIT KST15 swivelling manual and/or motorized adjustment Catalog 2/102
Product Lines
2005
MULTI-AXIS CONTROLLER V10 Remote control and Electro-hydraulic applications Catalog 1/140
SINGLE-AXIS CONTROLLER S14 Remote control and hoisting applications Catalog 1/188
MULTI-AXIS CONTROLLER VV8 Electro-hydraulic applications Catalog 1/132 DOUBLE-HANDLE CONTROLLER D 8 Electro-hydraulic applications Catalog 1/162
SINGLE-AXIS CONTROLLER S21 Electro-hydraulic applications Catalog 1/202 SINGLE-AXIS CONTROLLER S 1 Remote control and Electrohydraulic applications Catalog 1/180
MULTI-AXIS CONTROLLER V14 Remote control and hoisting applications Catalog 1/142
SINGLE-AXIS CONTROLLER S23 Electro-hydraulic applications and Offshore Catalog 1/208 MULTI-AXIS CONTROLLER V20 Remote control and other applications Catalog 1/144
SINGLE-AXIS CONTROLLER S3 Nautical navigation applications Catalog 1/212 DOUBLE-HANDLE CONTROLLER D 3 Nautical navigation applications Catalog 1/164
B1
B2 B3
B4 B5 B6 B7
B8
B9 B10
CRANE CONTROL UNIT KST18 swivelling manual and/or motorized adjustment Catalog 2/108
CONTROL PEDESTAL FOR OFFSHORE U22/32 Catalog 2/160 PORTABLE CONTROL UNIT TS22 Catalog 2/152 SIGNAL CAM CONTROLLER NU1 Hv Systems Catalog 3/402 ELECTRONIC CONTROL UNIT ES/43 Serves for control of proportional valves Catalog 3/502
Industrial controllers
Program overview
Part No. Type V6 VV 6 V 6 Ex V 11 V5 VV 5 V8 VV 8 V 10 V 14 V 20 V3 V 18 D/DD 64 D8 D3 S1 S 14 S 2/SS 2 S 21/SS 21 S 22/SS 22 S 23 S3 S6 N6 B1 B2 B3 B4 B5 B6 B 7/8 B9 B 10
1/010
2005
Page 1/100 1/102 1/154 1/110 1/120 1/122 1/130 1/130 1/140 1/142 1/144 1/150 1/152 1/160 1/162 1/164 1/180 1/188 1/200 1/202 1/204 1/208 1/212 1/216 1/220 1/240 1/280 1/284 1/285 1/286 1/288 1/289 1/290 1/292 1/294 1/296 1/350 1/360 2/020 2/030 2/040 2/050 2/060 2/070 2/072 2/080 2/090 2/102 2/108 2/130 2/132 2/134 2/136 2/138 2/140 2/142 2/150 2/152 2/160 2/162 2/164 2/170 3/100 3/101 3/102 3/103 3/200 3/300 3/400 3/402 3/404 3/406 3/502 3/510 3/520 3/530 4/100 5/001 5/100 5/900
1
Double-handle controller
Single-axis controller
5100... 5102 5104 5110 5120 5122 5130 5132 5140 5142 5144 5150 5152 5160 5162 5164 5180 5214 5200 5202 5204 5208 5212 5216 5220 5284... 5285... 5286... 5288... 5289... 5290... 5292... 5294... 5296...
Housing Command and indicating devices 2 Crane control unit KST 2 KST 3 KST 4 KST 5 KST 6 KST 7 KST 75 KST 8 KST 9 KST 15 KST 18 KFS 2 KFS 4 KFS 6 KFS 7 KFS 8 KFS 9 KFS 10 TS 1 TS 2 U 22/32 U 23/23 U 25/32 HT 1/2 P 7/PP 7 P 8/PP 8 P 10/P 11 P 12 GE 1 KVS SO/SS NU 1 NU 2 NU 3 ES/43 EP 1 EP 2 EP 3
Drivers seat
Portable control unit Control pedestal for offshore Pedant control unit 3 Pedal-controller
Gear limit switch Copy-cam controller DC-contact Signal-cam controller Regulator electronic board Electronic (Amplifier) Electronic Profi-Bus Electronic CAN-Bus 4 5 Spare parts Description data Technical data Representatives / another thing
Industrial controllers
1/011
2005
Our supplies are made in accordance with the General Conditions of Supply and Delivery for products and services of the electrical and electronic industry of the German Electrical and Electronic Manufacturers Association (ZVEI). Please note additional: Our catalog prices do not include value added tax, which is added separately. The prices are ex-works in Leingarten excluding packaging. Packaging is charged at cost and cannot be returned. Our gross prices apply for orders below EURO 72,. There is a minimum charge of EURO 24,. Where possible, small orders should be combined. We are entitled to charge any handling and production costs resulting from modifications of the order caused by the customer (both technical modifications and noncompliance of dead lines). Payment may be made within 30 days without discount. These conditions of payment shall be deemed to apply on receipt of our written order confirmation. All delivery goods remain our sole and absolute property until paid for in full. The delivery period commences only when all technical details have been clarified. Unforeseen circumstances justify an appropriate extension of the delivery period. All documents such as drawings, dimensional drawings, circuit diagramms, etc., are non-binding. We reserve the right to make any changes necessary, in particular technical changes. Court venue will be exclusively 74072 Heilbronn, Federal Republic of Germany.
Warning
Hazardous voltages are present on specific parts in this electrical device during operation. Only qualified personal, paying attention to the relevant safety precautions, should install, maintain, modify or fit accessories to the controller. Non-observance of this warning can result in death, severe personal injury or substantial property damage.
Hausanschrift/office: W. Gessmann GmbH Eppinger Strae 221 D-74211 Leingarten UST.Id.Nr.: DE 145786508
Banken/banks: Baden-Wrttembergische Bank Heilbronn (BLZ 620 300 50) 70 49 52 9600 SWIFT-Code: BW BK DE 6S 620 IBAN-Code: DE 23 620 300 50 7049529600 Deutsche Bank Heilbronn (BLZ 620 700 81) 01 94 605 SWIFT-Code: DEUT DE SS 620 IBAN-Code: DE 14 620 700 81 0019460500 Kreissparkasse Heilbronn (BLZ 620 500 00) 4776 SWIFT-Code: HE IS DE 66 IBAN-Code: DE 22 620 500 000 00 0004776
Handelsregister/ commercial register: Heilbronn HRB 312 Geschftsfhrer/ manager: Gerhard Huermann
Industrial controllers
Multi-axis controller V 6
The multi-axis controller V 6 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The V 6 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Mechanical life 10 million (operating cycles) Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +80 C Climate resistance Damp heat constant DIN IEC 68 part 2-3 Damp heat cyclic DIN IEC 68 part 2-30 Degree of protection front IP 54 IEC 529 DIN 40050 Technical data look catalog 5/100 Description data look catalog 5/002 1 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1/100
2005
5 7
right
3
left
4 2
8 6
Pos. 1 1-2 2 3 4 5 9 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 40 41 42 43 50 51 52 60 61 62 70
V 61 1
V 61.1 1 1-2
V 62 1 3 2 3-4 4 3
V 64 1 4 2 3-4
V 64.1 1
Price EURO
2 1-2
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
(prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 200, 160 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 4-0-4 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 5-0-5 or 6-0-6 Micro changeover contact (MZT 1) positive opening Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Steel sheet housing B 200 masterswitch max. size 05 Steel sheet housing B 230 x 340 masterswitch max. size 07 More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360 No. of contacts 2 4 6 8 10 12 2
M T H D DV B1 B 1T
01 02 03 04 05 06
70
P (P) (P)
1300 1500
B B
Industrial controllers
Multi-axis controller V 6
1/101
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Type 01 02 03 04 05 06
No. of contacts 2 4 6 8 10 12
Potentiometer T 130
Hole pattern Example for type-sign Steel sheet housing Multi-axis controller Gate Dead mans button Masterswitch direction 1-2 B V 62 P T- 03 Z P + 04 R X Special please to describe Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
Industrial controllers
Multi-axis controller VV 6
The multi-axis controller VV 6 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The VV 6 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Mechanical life 20 million (operating cycles) Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +80 C Climate resistance Damp heat constant DIN IEC 68 part 2-3 Damp heat cyclic DIN IEC 68 part 2-30 Degree of protection front IP 54 IEC 529 DIN 40050 Technical data look catalog 5/100 1 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1/102
2005
5 7
right
3
left
4 2
8 6
Pos. 1 1-2 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40
VV 61 1
VV 61.1 1 1-2
VV 62 1 3 2 3-4 4 3
VV 64 1 4 2 3-4
VV 64.1 1
Price EURO
2 1-2
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
(prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 200, 160 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 4-0-4 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 5-0-5 or 6-0-6 Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Steel sheet housing B 200 masterswitch max. size 05 Steel sheet housing B 230 x 440 masterswitch max. size 07 More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360 No. of contacts 2 4 6 8 10 12
M T H D DV B1 B 1T
01 02 03 04 05 06
70
41 42 43 50 51 52 60 61 62 70
Industrial controllers
Multi-axis controller VV 6
1/103
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Type 01 02 03 04 05 06
No. of contacts 2 4 6 8 10 12
Hole pattern
Example for type-sign Steel sheet housing Multi-axis controller Gate Dead mans button Masterswitch direction 1-2
B VV 62 P T- 03 Z
P + 04 R - X Special please to describe Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
Multi-axis controller V 6
Industrial controllers Explosion protection EExdllCT 6
1/104
2005
The multi-axis controller V 6 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The V 6 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1 3
left
5 4 7
right
8 6
Pos. 1 2 1-2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40
V 61 1
V 61.1 1 1-2
V 62 1 3 2 3-4 (prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction) 4
Type V 61 V 61.1 V 62
Price EURO
2 1-2
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
60 60 110 30
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Microchange over contact Control-handle with dead mans button 1 NO explosion protection Control-handle with signal button 1 NO EExdllCT 6 Control-handle with push button 1 NO PTB No. Ex-91C 1083 X Control-handle with flat push button 1 NO sealed cable Control-handle with palm grip B 1 3 metre long Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 200, 160 mm Masterswitch switching sequence 4-0-4 Microchange over contact explosion protection Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 EExdllCT 6 PTB No. Ex-91C 1083 X or to your contact-arrangement sealed cable 3 metre long Switching sequence 5-0-5 or 6-0-6 Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 238, with centre tap linear Life 5 x 106 switching cycles resistance 2 x 5 kOhm, 1 Watt wiper current max. 10 mA in housing explosion protection EExdllCT 6 PTB-No. Ex-85/1131 sealed cable 3 metre long Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... No. of contacts 2 4 6 8 10 12
M T H D DV B1 B 1T
01 02 03 04 05 06
70
41 42 43 50 51 52 60 61 62 70
(P) (P)
Housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices on enquiry
7
Multi-axis controller V 6
Industrial controllers Explosion protection EExdllCT 6
1/105
2005
42 T = dead mans button H = signal button M = latch for mechanical zero interlock T
38
H
40
M
40
180
max. 4
D = push button 10
180
Cover plate
IP 54 IP 00
56 Potentiometer
12
(Einbautiefe)
120
Type 01 02 03 04 05 06 80
No. of contacts 2 4 6 8 10 12
46 B 96
1 80 3 2 4
30
72
80
V 62 P T- 03 Z
Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
180
Industrial controllers
Multi-axis controller V 11
1/110
2005
The multi-axis controller V 11 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The V 11 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1 3
left
5 4 7
right
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation left (right-hand side installation is mirror image).
8 6
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40
V 11.1 1 3 2
V 11 1 4 2
Type V 11.1
Price EURO
500
V 11
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
(prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
60 60 25 20
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 4-0-4 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement No. of contacts 2 4 6
M T H D DV B1 B 1T
70 130 190
01 02 03
Potentiometer e.t.c. each masterswitch with mounted Conductive-plastic potentiometer T 365, with centre tap linear Life 107 switching cycles resistance 2 x 5 kOhm, 0,5 Watt wiper current max. 1 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Plastic housing I 160 x 240, masterswitch max. size 03 More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
70
41 42 43 50 51 52 60 61 62 70
Industrial controllers
Multi-axis controller V 11
Knob solid Palm grip B 1 38 42
1/111
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
36
36
M 120 120
max. 3
D = push button
Cover plate
IP 54 IP 00 55 71 57
Potentiometer T 365
Potentiometer T 130
75 B B
B 78 B
86
75
70 5 Type 01 02
70
B B
58
03 Hole pattern Example for type-sign Plastic housing Multi-axis controller Gate Dead mans button Masterswitch direction 1-2
I V 11 P T- 02 Z
P + 03 R - X Special please to describe Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
10
78
135
170
Industrial controllers
Multi-axis controller V 5
The multi-axis controller V 5 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The V 5 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/120
2005
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 40
V 51 1 3 2
V5 1 4 2
Type V 51
Price EURO
500
V5
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
(prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
50 50 25 30
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 5 Control-handle with palm grip B 5 with push button top 1 NO Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 3-0-3 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 4-0-4 Micro changeover contact (MZT 1) positive opening (additional price) Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Plastic housing I 120 x 160, masterswitch max. size 6 More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360 No. of contacts 1 2 3 4 5 6 1
50 50 50 60 60 40 60
M T H D DV B5 B 5T
1 2 3 4 5 6
70
41 42 43 50 51 52 60 61 62 70
11
Industrial controllers
Multi-axis controller V 5
35
1/121
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Type 1 2 3 4 5 6
Plastic housing
Hole pattern
Example for type-sign Plastic housing Multi-axis controller Gate Dead mans button Masterswitch direction 1-2
I V5 P T- 3
P+ 4 R-X Special please to describe Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
12
145
Industrial controllers
Multi-axis controller VV 5
The multi-axis controller VV 5 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications. The modular design enables the switching device to be used universally. The VV 5 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/122
2005
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40
VV 51 1 3 2
VV 5 1 4 2
Type VV 51
Price EURO
600
VV 5
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
(prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
60 60 25 30
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 3-0-3 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 4-0-4 Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Plastic housing I 120 x 160, masterswitch max. size 4 More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360 No. of contacts 1 2 3 4 5 6
M T H D DV B1 B 1T
1 2 3 4 5 6
70
41 42 43 50 51 52 60 61 62 70
13
Industrial controllers
Multi-axis controller VV 5
1/123
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Cover plate
D = push button
Plastic housing
Example for type-sign Plastic housing Multi-axis controller left Gate Dead mans button Masterswitch direction 1-2
I VV 5 P T - 3
P+ 4 R-X Special please to describe Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
14
Industrial controllers
Multi-axis controller V 8 / VV 8
1/130
2005
The multi-axis controller V 8 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications.The modular design enables the switching device to be used universally. The V 8 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Mechanical life V 8 10 million (operating cycles) Mechanical life VV 8 12 million (operating cycles) Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +80 C Climate resistance Damp heat constant DIN IEC 68 part 2-3 Damp heat cyclic DIN IEC 68 part 2-30 Degree of protection front IP 54 IEC 529 DIN 40050 Technical data look catalog 5/100 1 5 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
3
left
7
right
8 6 Price EURO
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40
V 81 1 3 2
V8 1 4 2
Type V 81 VV 81 V8 VV 8
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
(prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
60 60 30 30
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 180, 140 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence -0Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 3-0-3 Potentiometer e.t.c. each masterswitch with mounted Conductive-plastic potentiometer T 301, with centre tap linear Life 107 switching cycles resistance 2 x 5 kOhm, 0,5 Watt wiper current max. 1 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 120 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Electronic (Amplifier, Profi-Bus, CAN-Bus) look catalog 3/510/ Cover housing Filter plug M 20 for air-condition Cable entry M 20 with anti-kink protection and strain relief Plug in socket 14-pole female insert CPC 17 unwired Connector 14-pole male insert CPC 17 unwired Wiring plug in socket or connector each wired-connection Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters No. of contacts 1 2 3
M T H D DV B1 B 1T
20 40 60
1 2 3
70
41 42 43 45 50 51 52 53 54 55 60 61
(P) (P)
15
Industrial controllers
Multi-axis controller V 8 / VV 8
1/131
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
injustable
Cover plate
Cover housing
(View turned 90) Palm grip B 3 look catalog 1/286 for the 3. direction 11-12 for the 4. direction 13-14
Expanse for impedance-converter and board with solder-, plug-, or screw terminal
76
Lifting 13 mm
View X Example for type-sign Cover housing Multi-axis controller Gate Dead mans button Masterswitch direction 1-2 Spring return direction 1-2
16
Special please to describe Potentiometer e.t.c. direction 3-4 Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2
45
215
Industrial controllers
Multi-axis controller V 10
1/140
2005
The multi-axis controller V 10 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for remote control and electro-hydraulic applications. The V 10 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 6 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1 3
left
5 4 7
right
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
8 6
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40
V 10.1 1 3 2
V 10 1 4 2
Type V 10.1
Price EURO
250
V 10
(prohibits diagonal shifting) (for e. H-gate) (include in the spindle block) (for each direction)
20 20
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO
50 80
M T
Control-handle with palm grip B 5 Control-handle with palm grip B 5 with push button top 1 NO More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch without switching sequence Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 4-0-4 Potentiometer e.t.c. each masterswitch with mounted Conductive-plastic potentiometer T 320, with centre tap linear Life 107 switching cycles resistance 2 x 5 kOhm, 0,5 Watt wiper current max. 1 mA No. of contacts 2 4 6
40 60
B5 B 5D
20 40 60
01 02 03
20
41 42 43 45 50 51 52 60 61 62 70
more Potentiometer e.t.c. look catalog 1/240... Electronic (Amplifier, Profi-Bus, CAN-Bus) look catalog 3/510/ Plastic housing I 122 x 120 More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
17
350
Industrial controllers
Multi-axis controller V 10
1/141
2005
Ball grip
Palm grip B 5 35
Cover plate
B 5D = push button
Plastic housing
Hole pattern
Example for type-sign Plastic housing Multi-axis controller Gate Dead mans button Masterswitch direction 1-2
I V 10 P
T - 01 Z
P + 03 Z - X Special please to describe Spring return direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
18
145
Industrial controllers
Multi-axis controller V 14
The multi-axis controller V 14 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for remote control and hoisting applications. The V 14 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
1/142
2005
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
V 14.1 1 3 2 Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake
V 14 1 4 2 (prohibits diagonal shifting) (for e. H-gate) (include in the spindle block) (for each direction)
Type V 14.1 V 14
Price EURO
20 20
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO
50 80 80
M T H
Control-handle long 80 mm Masterswitch switching sequence 4-0-4 adjustable (with encoder 6-0-6) Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement No. of contacts 2 4 6 70 130 190 01 02 03
44
Mechanical encoder with mounted direction 1-2 and 3-4 each 1 encoder life 5 x 106 switching cycles, 0,5 Watt wiper current max. 1 mA Mechanical encoder MEC 1-2 male connector EA/02-10 contact-arrangement MS 26-0 look catalog 5/001 Conductive-plastic potentiometer with centre tap linear resistance 2 x 10 kOhm Mechanical encoder MEC 1-7 male connector EA / 10-10 contact-arrangement MS 26-0-1 look catalog 5/001 Conductive-plastic potentiometer with centre tap linear resistance 2 x 5 kOhm Mechanical encoder MEC 1-6 male connector EA / 09-10, 6 Bit Gray-Code Mechanical encoder MEC 1-6-5 male connector ER / 36-10 Power supply 24 V DC, output power impressed 4-20 mA Mechanical encoder MEC 1-6-8 male connector ER / 36-10 Power supply 24 V DC, output power impressed 0-20 mA Housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
C 61
30
45
C 62
20
46 47 48 52 60 61 70
C 63 C 64 C 65
30 30 30
C C C
19
Industrial controllers 25 T = dead mans button H = signal button M = latch for mechanical zero interlock
Multi-axis controller V 14
1/143
2005
T H M
40
40
Cover plate
IP 65 IP 00 8 56
max. 4
60
1
Type 70 No. of contacts 2 4 6 Dimen. B 36 45 54
3
50 54
4
B
01 02 03
3,5
51
40
Hole pattern Example for type-sign Multi-axis controller Gate Dead mans button Masterswitch direction 1-2 Spring return direction 1-2 V 14 P T - 01 Z C + 01 Z C X Special please to describe Mechanical encoder MEC direction 3-4 Spring return direction 3-4 Masterswitch direction 3-4 Mechanical encoder MEC direction 1-2
20
52
Industrial controllers
Multi-axis controller V 20
The multi-axis controller V 20 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for remote control and other applications. The V 20 is resistant to oil, maritime climate, ozone and UV radiation. Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 3 million (operating cycles) Operation -30 C to +70 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
1/144
2005
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 9 10 11 12 13 14 20 21 22 23 24 25 30 34 35 36
V 20.1 1 3 2
V 20 1 4 2
Weight gramm 80
Type V 20.1
Price EURO
90
V 20
for open shifting switching sequence 1-0-1 to 3-0-3 (prohibits diagonal shifting) (for e. H-gate) (include in the spindle block)
P P Z
switching sequence 4-0-4 Mechanical encoder with mounted direction 1-2 and 3-4 each 1 encoder life 3 x 106 switching cycles 0,5 Watt wiper current max. 1 mA
44
Mechanical encoder MEC 2-1 male connector EA/15-10 contact-arrangement MS 224-0 look catalog 5/001 Conductive-plastic potentiometer with centre tap linear resistance 2 x 5 kOhm Mechanical encoder MEC 2-2 male connector EA / 11-10 contact-arrangement MS 24-0 look catalog 5/001 Conductive-plastic potentiometer with centre tap linear resistance 2 x 5 kOhm Housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
C 70
15
45
C 71
15
52 60 61 70
21
Industrial controllers
Multi-axis controller V 20
1/145
2005
32
32
11
32
32
Cover plate
IP 65
IP 00 27 32,5
5,5
55
2,5
25,8 47
2,5
55
3,5
51
40
55
Hole pattern
Example for type-sign Multi-axis controller Gate Spring return direction 1-2 Mechanical encoder direction 1-2
V 20
P - Z
C - X Special please to describe Mechanical encoder direction 3-4 Spring return direction 3-4
22
Industrial controllers
Multi-axis controller V 3
The multi-axis controller V 3 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The V 3 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 4 A 250 V AC 15 res. 1 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/150
2005
1 3
left
5 4 7
right
8 6
Pos. 1 2 1-2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40
V 31 1 1-2
V3 1 3 2 3-4 (prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction) 4
Type V 31
Price EURO
1000
V3
Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
P P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 200, 160 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 4-0-4 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 5-0-5 Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Steel sheet housing B 200 masterswitch max. size 04 Steel sheet housing B 230 masterswitch max. size 06 More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360 No. of contacts 2 4 6 8 10 12
M T H D DV B1 B 1T
01 02 03 04 05 06
70
41 42 43 50 51 52 60 61 62 70
23
Industrial controllers
Multi-axis controller V 3
1/151
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Potentiometer T 130
Type 01 02 03 04 05 06
Hole pattern
Example for type-sign Steel sheet housing Multi-axis controller Gate Dead mans button Masterswitch direction 1-2
B V3 P
T - 03 Z
P + 04 R - X Special please to describe Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2 Spring return direction 1-2
24
Industrial controllers
Multi-axis controller V 18
1/152
2005
The multi-axis controller V 18 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The V 18 is resistant to oil, maritime climate, ozone and UV radiation. The modular micro changeover contacts are positive opening to VDE 0113. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 20 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 40
V 181 1 3 2
V 18 1 4 2
Type V 181
Price EURO
3500
V 18
110 30
Z R
Masterswitch switching sequence 2-0-2 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement
No. of contacts 2 4 6
01 02 03
Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240...
70
41 42 43 50 51 52 60 61 62 70
300 300
(P) (P)
25
Industrial controllers
Multi-axis controller V 18
1/153
2005
Type 01 02 03
No. of contacts 2 4 6
Hole pattern
Example for type-sign Multi-axis controller Masterswitch direction 1-2 Spring return direction 1-2 Potentiometer e.t.c. direction 1-2
V 18 - 02 Z
P+ 02 R C - X Special please to describe Encoder direction 3-4 Friction brake direction 3-4 Masterswitch direction 3-4
26
Industrial controllers
Double-handle controller D 64 / DD 64
1/160
2005
The double-handle controller is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The D 64 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Mechanical life D 64 Mechanical life DD 64 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 10 million (operating cycles) 20 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050 1 3 5 7
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
left
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40 2 1
D 64 3 1
DD 64 3
Weight gramm
Type
Price EURO
D 64 DD64
(for each direction) (for each direction) (for each direction for Pos. 20-28)
110 30
Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with T-grip Control-handle with T-grip and push button side 1 NO Control-handle long or short 160, 200 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 4-0-4 Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 5-0-5 or 6-0-6 Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240...
M T H D DV Q QD
No. of contacts 2 4 6 8 10 12
01 02 03 04 05 06
70
41 42 43 50 51 52 60 61 62 70
(P) (P)
More housing look catalog 1/350 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
27
Industrial controllers
Double-handle controller D 64 / DD 64
1/161
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
58
Cover plate
Type 01 02 03 04 05 06
No. of contacts 2 4 6 8 10 12
Potentiometer T 130
Hole pattern
Example for type-sign Double-handle controller T-grip with push button direction 1-2 T-grip direction 3-4 Masterswitch direction 1-2 Spring return direction 1-2
D 64 QD Q - 03 Z + 02 R
P-X
Special please to describe Potentiometer e.t.c. direction 3-4 Spring return direction 3-4 Masterswitch direction 3-4
28
Industrial controllers
Double-handle controller D 8
1/162
2005
The double-handle controller D 8 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications. The modular design enables the switching device to be used universally. The D 8 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Mechanical life 8 million (operating cycles) Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +80 C Climate resistance Damp heat constant DIN IEC 68 part 2-3 Damp heat cyclic DIN IEC 68 part 2-30 Degree of protection front IP 54 IEC 529 DIN 40050 Technical data look catalog 5/100 1 3 5 7 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
left
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40 41 42 43 45 50 51 52 53 54 55 60 61 2 1
D8 3
Weight gramm
Type
Price EURO
1000 4
D8
(for each direction) (for each direction) (for each direction for Pos. 20-28)
30 30
Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with T-grip Control-handle with T-grip and push button side 1 NO Control-handle long or short 180, 140 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence -0Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 3-0-3 Potentiometer e.t.c. each masterswitch with mounted Conductive-plastic potentiometer T 301, with centre tap linear Life 107 switching cycles resistance 2 x 5 kOhm, 0,5 Watt wiper current max. 1 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 120 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Electronic (Amplifier, Profi-Bus, CAN-Bus) look catalog 3/510/ Cover housing Filter plug M 20 for air-condition Cable entry M 20 with anti-kink protection and strain relief Plug in socket 14-pole female insert CPC 17 unwired Connector 14-pole male insert CPC 17 unwired Wiring plug in socket or connector each wired-connection Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
M T H D DV Q QD
No. of contacts 1 2 3
20 40 60
1 2 3
70
P (P) (P)
29
Industrial controllers
Double-handle controller D 8
1/163
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Cover plate
Hole pattern
View x
Example for type-sign Cover housing Double-handle controller T-grip with push button direction 1-2 T-grip direction 3-4 Masterswitch direction 1-2 Spring return direction 1-2
30
B D 8 QD Q - 2
P+3
P-X
Special please to describe Potentiometer e.t.c. direction 3-4 Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2
Industrial controllers
Double-handle controller D 3
1/164
2005
The double-handle controller D 3 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for nautical navigation applications. The modular design enables the switching device to be used universally. The D 3 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Mechanical life 12 million (operating cycles) Permissible ambient temperature Operation -40 C to +60 C Storage -50 C to +80 C Climate resistance Damp heat constant DIN IEC 68 part 2-3 Damp heat cyclic DIN IEC 68 part 2-30 Degree of protection front IP 66 IEC 529 DIN 40050 Technical data look catalog 5/100 1 3 5 7 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
left
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40 2 1
D3 3
Weight gramm
Type
Price EURO
4000 4
D3
Spring return in 0-position Friction brake adjustable Control-handle with knob solid
30 30
Z R
1 NO
110 40 60
D Q QD
Control-handle with T-grip Control-handle with T-grip and push button side 1 NO Control-handle long or short 180, 140 mm Masterswitch switching sequence -0Direction 1-2 and 3-4 each 1 masterswitch Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence special Potentiometer e.t.c. each masterswitch with mounted Conductive-plastic potentiometer T 246, with centre tap linear Life 107 switching cycles resistance 2 x 5 kOhm, 0,5 Watt wiper current max. 1 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 75 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Cover housing Filter plug M 20 for air-condition Cable entry M 32 with anti-kink protection No. of contacts 1 2 3
20 40 60
1 2 3
70
41 42 43 50 51 52 53 54 55 56 60 61
Indicating label eloxal aluminium plate silvery (include in the spindle block) Engraved each 10 characters
31
Industrial controllers
Double-handle controller D 3
1/165
2005
Direction 1-2
Direction 3-4
Cover plate
Adjustment screw for friction brake Cover housing Screw terminal Filter plug M 20 Cable entry M 32 D Knob solid D = push button
Hole pattern
Example for type-sign Cover housing Double-handle controller T-grip with push button direction 1-2 T-grip direction 3-4 Masterswitch direction 1-2 Friction brake direction 1-2
32
B D 3 QD Q - 2
P+2
P-X
Special please to describe Potentiometer e.t.c. direction 3-4 Friction brake direction 3-4 Masterswitch direction 3-4 Potentiometer e.t.c. direction 1-2
Industrial controllers
Single-axis controller S 1
1/180
2005
The single-axis controller S 1 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for remote control and electro-hydraulic applications. The S 1 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement dead mans button Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 2 A 250 V AC 15 res. 1 A 24 V DC 13 6 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29
S1 1
Type S1
Price EURO
Z R
Control-handle with knob solid GK 4 Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO
50 80
M T
GS 8
GS 8
44
Potentiometer e.t.c. each masterswitch with mounted Conductive-plastic potentiometer T 375, with centre tap linear life 107 switching cycles resistance 2 x 5 kOhm 0,5 Watt wiper current max. 1 mA Conductive-plastic potentiometer T 430 with centre tap linear life 107 switching cycles resistance 2 x 5 kOhm 2 conductive-plastic-contact way arrangement MSP 21 (catalog 5/001) 0,5 Watt wiper current max. 1 mA
20
45
25
52 60 61 70
Housing look catalog 1/350 Indicating labels not engraved with 2 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
33
Industrial controllers
Single-axis controller S 1
1/181
2005
Cover plate
S 1 with knob GS 8
Cover plate
1 2
Hole pattern
S1 T
34
Industrial controllers
Single-axis controller S 14
1/188
2005
The single-axis controller S 14 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for remote control and hoisting applications. The S 14 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
S 14 1
Type S 14
Price EURO
Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO
50 80 80
M T H
Control-handle long 80 mm Masterswitch switching sequence 4-0-4 adjustable (with encoder 6-0-6) Direction 1-2 or 3-4 Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement No. of contacts 2 4 6 70 130 190 01 02 03
44
45
46 47 48 52 60 61 70
Mechanical encoder with mounted direction 1-2 or 3-4 life 5 x 106 switching cycles, 0,5 Watt wiper current max. 1 mA Mechanical encoder MEC 1-2 male connector EA/02-10 contact-arrangement MS 26-0 look catalog 5/001 Conductive-plastic potentiometer with centre tap linear resistance 2 x 10 kOhm Mechanical encoder MEC 1-7 male connector EA / 10-10 contact-arrangement MS 26-0-1 look catalog 5/001 Conductive-plastic potentiometer with centre tap linear resistance 2 x 5 kOhm Mechanical encoder MEC 1-6 male connector EA / 09-10, 6 Bit Gray-Code Mechanical encoder MEC 1-6-5 male connector ER / 36-10 Power supply 24 V DC, output power impressed 4-20 mA Mechanical encoder MEC 1-6-8 male connector ER / 36-10 Power supply 24 V DC, output power impressed 0-20 mA Housing look catalog 1/350 Indicating labels not engraved with 2 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
C 61
30
C 62
20
C 63 C 64 C 65
30 30 30
C C C
35
Industrial controllers
Single-axis controller S 14
1/189
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
25 T
40 40
max. 4 Cover plate IP 65 IP 00 8 Mechanical encoder B Cage clamp connection max. 1,5 mm2 26 28
56
60
Type 01 02 03
65
52
40
3,5
16
38
20 Hole pattern Example for type-sign Single-axis controller Dead mans button Masterswitch direction 1-2 S 14 T - 01 Z C-X Special please to describe Mechanical encoder MEC direction 1-2 Spring return direction 1-2
36
40
50
54
Industrial controllers
Single-axis controller S 2 / SS 2
The single-axis controller S 2 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications. The modular design enables the switching device to be used universally. The S 2 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life S 2 Mechanical life SS 2 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/200
2005
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 40 1-2
S2 1
Type S2 SS 2
Price EURO
60 20 20
P Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 5 Control-handle with palm grip B 5 with push button top 1 NO Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 5-0-5 No. of contacts 3 5 7 9
50 50 50 60 60 40 60
M T H D DV B5 B 5T
Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement
02 03 04 05
Micro change over contact (MZT1) positive opening (additional price) Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Steel sheet housing B 200 masterswitch Gr. 05 More housing look catalog 1/350 Indicating labels not engraved with 2 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
1 70 P
41 42 43 50 51 52 60 61 62 70
37
Industrial controllers
Single-axis controller S 2 / SS 2
1/201
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Knob solid
D = -push button
Cover plate
Type 02 03 04 05
Potentiometer T 130
Palm grip B 5 35
36,7 145 B 5T = dead mans button Hole pattern Example for type-sign Single-axis controller Dead mans button Masterswitch direction 1-2 S 2 T - 02 Z P-X Special please to describe Potentiometer e.t.c. Spring return
38
Industrial controllers
Single-axis controller S 21 / SS 21
The single-axis controller S 21 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications. The modular design enables the switching device to be used universally. The S 21 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life S 21 Mechanical life SS 21 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/202
2005
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40 1-2
S 21 1
Type S 21 SS 21
Price EURO
Spring return in 0-position Friction brake adjustable Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence 5-0-5 No. of contacts 3 5 7 9
20 20
Z R
M T H D DV B1 B 1T
Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement
02 03 04 05
Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Steel sheet housing B 200 masterswitch Gr. 05 More housing look catalog 1/350 Indicating labels not engraved with 2 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
70
41 42 43 50 51 52 60 61 62 70
39
Industrial controllers
Single-axis controller S 21 / SS 21
1/203
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Cover plate
Palm grip B 1
Potentiometer T 130
Example for type-sign Single-axis controller Dead mans button Masterswitch direction 1-2
S 21 T - 02 Z
40
Industrial controllers
Single-axis controller S 22 / SS 22
The single-axis controller S 22 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications. The modular design enables the switching device to be used universally. The S 21 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life S 22 Mechanical life SS 22 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/204
2005
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40 1-2
S 22 1
Type S 22 SS 22
Price EURO
Spring return in 0-position Friction brake adjustable Control-handle with knob solid Control-handle with latch for mechanical zero interlock Control-handle with dead mans button 1 NO Control-handle with signal button 1 NO Control-handle with push button 1 NO Control-handle with flat push button 1 NO Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/280... Masterswitch switching sequence -0No. of contacts 1 2 3 4
20 20
Z R
50 50 50 60 60 40 60
M T H D DV B5 B 5T
Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 2-0-2 Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycle resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Steel sheet housing B 200 masterswitch Gr. 4 More housing look catalog 1/350 Indicating labels not engraved with 2 arrows Engraved each 10 characters Command and indicating devices look catalog 1/360
1 2 3 4
70
41 42 43 50 51 52 60 61 62 70
41
Industrial controllers
Single-axis controller S 22 / SS 22
1/205
2005
T = dead mans button H = signal button M = latch for mechanical zero interlock
Knob solid
D = push button
Cover plate
Type 1 2 3 4 Hole pattern Example for type-sign Single-axis controller Dead mans button Masterswitch direction 1-2 S 22 T - 2 Z P-X Special please to describe Potentiometer e.t.c. Spring return
42
145
Industrial controllers
Single-axis controller S 23
1/208
2005
The single-axis controller S 23 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications and offshore. The modular design enables the switching device to be used universally. The S 23 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 6 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 1-2
S 23 1
Type S 23
Price EURO
20 20
Z R
Control-handle with knob solid Control-handle with latch for mechanical zero interlock 50 M
40
No. of contacts 1 2 3
1 2 3 4
Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 2-0-2 Potentiometer e.t.c. each masterswitch with mounted
40 41 42 43 50 51 52 60 61 62 70
Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Steel sheet housing B 200 masterswitch Gr. 4 More housing look catalog 1/350 Indicating labels not engraved with 2 arrows Engraved each 10 characters
70
P (P) (P)
1300
Industrial controllers
Single-axis controller S 23
1/209
2005
Cover plate
Potentiometer T 130
5,5 or M 5
Type 1 2 3 4
direction
Hole pattern
Example for type-sign Single-axis controller Mechanical zero interlock Masterswitch direction 1-2
S 23 M - 2
44
Industrial controllers
Single-axis controller S 3
1/212
2005
The single-axis controller S 3 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for nautical navigation applications. The modular design enables the switching device to be used universally. The S 3 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 12 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 66 IEC 529 DIN 40050
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 40 2 1
S3
Type S3
Spring return in 0-position Friction brake adjustable Control-handle with knob solid
30 30
Z R
22,22,-
1 NO
110 40 60
D Q QD
52,19,63,11,32,44,56,-
Control-handle with T-grip Control-handle with T-grip and push button side 1 NO Control-handle long or short 180, 140 mm Masterswitch switching sequence -0Direction 1-2 or 3-4 Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence special Potentiometer e.t.c. each masterswitch with mounted Conductive-plastic potentiometer T 246, with centre tap linear Life 107 switching cycles resistance 2 x 5 kOhm, 0,5 Watt wiper current max. 1 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 75 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Cover housing Filter plug M 20 for air-condition Cable entry M 32 with anti-kink protection No. of contacts 1 2 3
20 40 60
1 2 3
29,70 P 118,-
41 42 43 50 51 52 53 54 55 56 60 61
49,113,39,11,13,-
Indicating label eloxal aluminium plate silvery (include in the spindle block) Engraved each 10 characters
7,45
Industrial controllers
Single-axis controller S 3
1/213
2005
60
60
D 28
Cover plate
25 IP 66 IP 00 60
85
70 120
100 82 6
Hole pattern
Example for type-sign Cover housing Single-axis controller T-grip with push button Masterswitch direction 1-2 Friction brake direction 1-2
84
B S 3 QD- 2
P-X
46
145
Industrial controllers
Single-axis controller S 6
The single-axis controller S 6 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting applications. The modular design enables the switching device to be used universally. The S 6 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/216
2005
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
S6 1
Type S6
Price EURO
110 30
Z R
110 40 60
D B1 B 1D
Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top 1 NO Control-handle long or short 265, 225 mm
Masterswitch switching sequence 4-0-4 Direction 1-2 or 3-4 Switching program according contact-arrangement MS... look catalog 5/001 or to your contact-arrangement Switching sequence 5-0-5 or 6-0-6 Potentiometer e.t.c. each masterswitch with mounted Wire-wound potentiometer T 130, with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm, 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240...
No. of contacts 2 4 6 8 10 12
01 02 03 04 05 06
40
70
41 42 43 50 51 52 60 61 62 70
(P) (P)
More housing look catalog 1/350 Indicating labels not engraved with 2 arrows Engraved each 10 characters
Industrial controllers
Single-axis controller S 6
1/217
2005
Potentiometer T 130
D = push button
B 1D = push button
Example for type-sign Single-axis controller Push button Masterswitch direction 1-2
S 6 D - 03 Z
48
Industrial controllers
Control-switch N 6
The control-switch N 6 is a rugged switching device according IEC 947-5-1 EN 60947 DIN VDE 0660-200 for hoisting and electro-hydraulic applications. The modular design enables the switching device to be used universally. The N 6 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Mechanical life Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100 Description data look catalog 5/002 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
1/220
2005
Pos. 1 2 3 4 5 6 7 8 10 11 12 15 16 17 Drive 20 21 22 23 24 Potentiometer e.t.c. with mounted 25 Wire-wound potentiometer T 130 with centre tap linear Life 107 switching cycles resistance 2 x 0,5/1/2/5/10 kOhm 1,5 Watt wiper current max. 10 mA 26 27 28 30 40 41 50 Prepared for mounting potentiometer shaft 6 mm adjusting-angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. more Potentiometer e.t.c. look catalog 1/240... Housing look catalog 1/350 Indicating labels not engraved Engraved each 10 characters Command and indicating devices look catalog 1/360 Knob Ball-handle Rotary mechanism Switching sequence 5-0-5 or 6-0-6 or 0-18 Micro changeover contact (MZT1) positive opening (additional price) Spring return in 0-position Friction brake adjustable max. 100 Grad (2 x 70) max. 260 Grad (2 x 130) 2 Control-switch insert with free shaft end Switching sequence 4-0-4 Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement No. of contacts 2 4 6 8 10 12
Type 01 02 03 04 05 06
Price EURO
110 30
Z R
Degree of protection, front IP 65 by seal ring Plastic-front plate 88 x 88 mm with indicating label 20 E
30 50 30
KN HG DG
70
(P) (P)
49
Industrial controllers
Control switch N 6
1/221
2005
Ball-handle
Cover plate
Rotary mechanism
Potentiometer
Indicating labels
Quadrangle 8
88
Type 01 02 03 04 05 06
No. of contacts 2 4 6 8 10 12
Spring return
+25
Hole pattern
Example for type-sign Control-switch Control-switch insert Friction brake Potentiometer e.t.c.
N 6 -02 R
P - E KN - X
50
58
Industrial controllers
1/240
2005
^ =
1 2 3 4 5
2 2 2 2 2
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
for mounting on: V 6 / D 64 / V 5 / V 3 / S 2 / S 6 / N 6 / P 7 / P 8 Wire-wound potentiometer linear life 107 switching cycles 1,5 Watt max. wiper current 10 mA Wire-wound potentiometer linear with centre tap life 107 switching cycles 1,5 Watt max. wiper current 10 mA Wire-wound potentiometer linear life 107 switching cycles 2,5 Watt max. wiper current 10 mA like T 131 but with oil-filling protection for corrossion Wire-wound potentiometer linear with centre tap life 107 switching cycles 2,5 Watt max. wiper current 10 mA like T 132 but with oil-filling protection for corrossion Wire-wound potentiometer characteristic progressive with centre tap life 107 switching cycles 1,5 Watt max. wiper current 10 mA Wire-wound potentiometer linear with centre tap life 5 x 106 switching cycles 1Watt max. wiper current 10 mA Wire-wound potentiometer linear life 5 x 106 switching cycles 1 Watt max. wiper current 10 mA Wire-wound potentiometer linear with centre tap life 106 switching cycles 60 Watt Wire-wound potentiometer linear life 106 switching cycles 60 Watt Conductive-plastic potentiometer linear life 107 switching cycles 0,5 Watt max. wiper current 1 mA Conductive-plastic potentiometer linear with centre tap life 107 switching cycles 0,5 Watt max. wiper current 1 mA
Type T 129 T 130 T 131 T 131-Oel T 132 T 132-Oel T 178 T 238 T 237 T 133 T 134 T 374 T 396
Part No. 5240... ...00100 ...00200 ...00300 ...00400 ...00500 ...00600 ...00700 ...00800 ...00900 ...01000 ...01100 ...01200 ...01300
Type P01 P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13
Price EURO
for mounting on: V 8 / D 8 / P 10 / P 12 17 18 19 Wire-wound potentiometer linear with centre tap life 5 x 106 switching cycles 1 Watt max. wiper current 10 mA Conductive-plastic potentiometer linear with centre tap life 107 switching cycles 0,5 Watt max. wiper current 1 mA Conductive-plastic potentiometer linear with centre tap life 107 switching cycles; 3 conductive-plastic contact way arrangement MSP 21-0 (catalog 5/001) 0,5 Watt max.wiper current 1 mA Conductive-plastic potentiometer double linear with centre tap life 107 switching cycles; 0,5 Watt max. wiper current 1 mA T 239 T 301 T 426 20 20 25 ...01700 ...01800 ...01900 P17 P18 P19
20 21 22 23
T 432
25
...02000
P20
for mounting on: V 10 24 25 26 27 Wire-wound potentiometer linear with centre tap life 5 x 106 switching cycles 1 Watt max. wiper current 10 mA Conductive-plastic potentiometer linear with centre tap life 107 switching cycles 0,5 Watt max. wiper current 1 mA Conductive-plastic potentiometer linear life 107 switching cycles 0,5 Watt max. wiper current 1 mA Conductive-plastic potentiometer linear with centre tap life 107 switching cycles; 2 conductive-plastic contact way arrangement MSP 21 (catalog 5/001) 0,5 Watt max. wiper current 1 mA T 321 T 320 T 337 T 430 20 20 20 25 ...02400 ...02500 ...02600 ...02700 P24 P25 P26 P27
28 29 30 for mounting on: V 11 31 32 36 41 42 Wire-wound potentiometer linear with centre tap life 5 x 106 switching cycles 1 Watt max. wiper current 10 mA Conductive-plastic potentiometer linear with centre tap life 107 switching cycles 0,5 Watt max. wiper current 1 mA Special potentiometer ^ potentiometer Prepared for mounting potentiometer adjusting-angle switching device = Prepared for mounting potentiometer adjusting-angle variable ...04100 ...04200
51
T 316 T 365
20 20
...03100 ...03200
Industrial controllers
Opto-electronic encoder Output digital OEC 2 with attach to our switching device
Type OEC 2-1-1 OEC 2-2-1 OEC 2-3- OEC 2-4- OEC 2-5- OEC 2-6- Weight gramm 410 410 410 410 410 410 Part No. 52410...
1/241
2005 Price EURO
Pos. 10 11 12 13 14 15 16 17 18 19
for mounting on: V 6 / D 64 / V 11 / S 2 / S 6 / N 6 Opto-electronic encoder 8 Bit Gray-Code T 359 8 Bit Binary-Code T 359 6 Bit Gray-Code T 359 6 Bit Binary-Code T 359 9 Bit Gray-Code T 384 9 Bit Binary-Code T 384
1 2 3 4 5
= Output characteristic = Linear = Quadratic = Progressive = Linear one sided right turn = Linear one sided left turn
Technical data Power supply 18-30 V DC Output PNP 24 V DC 10 mA Scanning Gray-Code Rotation angle max. 150 (360)
9 Bit direction-signal
0 21 12 3 3 6 h9 4,2 90 35 35
360
Cable Liy(c) 14 x 0,25 mm2 2000 mm long wired on connector DA 15 with end splice Prepared for mounting encoder adjusting-angle switching-gear ^ = encoder Prepared for mounting encoder adjusting-angle variable. Additional price per metre cable Liy(c) 14 x 0,25 mm2 (C) (C)
42
36 26 30,5 49,5 80
20 h11
Industrial controllers
Opto-electronic encoder Output analog OEC 2 with attach to our switching device
Type OEC 2-3--1 Weight gramm 410 Part No. 52410...
1/242
2005 Price EURO
Pos. 1 2 3 4
for mounting on: V 6 / D 64 / V 11 / S 2 / S 6 / N 6 Opto-electronic encoder T 366 Output voltage impressed 0 10 Volt
Type C11
1 2 3
Technical data Power supply 18-30 V DC Output 0 10 V (+ 5 mA) Scanning 6 bit Gray-Code Rotation angle max. 150 direction-signal right
+10 Volt
+10 Volt
direction-signal left
zero adjustment with LED 5 6 7 8 1 2 3 = Output characteristic = Linear = Quadratic = Progressive Technical data Power supply 18-30 V DC Output 10 V ( 5 mA) Scanning 6 bit Gray-Code Rotation angle max. 150 Opto-electronic encoder T 367 Output voltage impressed 10 Volt OEC 2-3--2 410 C15
direction-signal right
+10 Volt
-10 Volt
direction-signal left
40 41 42 43
Cable Liy(c) 14 x 0,25 mm2 2000 mm long wired on connector DA 15 with end splice Prepared for mounting encoder adjusting-angle switching-gear ^ = encoder Prepared for mounting encoder adjusting-angle variable Additional price per metre cable Liy(c) 14 x 0,25 mm2
53
(C) (C)
Industrial controllers
Opto-electronic encoder Output analog OEC 2 with attach to our switching device
Type OEC 2-3--5 OEC 2-3--8 Weight gramm 410 410 Part No. 52410...
1/243
2005 Price EURO
Pos. 1 2 3 4
for mounting on: V 6 / D 64 / V 11 / S 2 / S 6 / N 6 Opto-electronic encoder Output power impressed 4 20 mA T 368 Opto-electronic encoder Output power impressed 0 20 mA T 368
1 2 3
Technical data Power supply 18-30 V DC Output 4/0 20 mA Scanning 6 bit Gray-Code Rotation angle max. 150 direction-signal right
+20mA
+20mA
direction-signal left
+4mA 0 mA
alternative
zero adjustment with LED 5 6 7 8 1 2 3 = Output characteristic = Linear = Quadratic = Progressive Technical data Power supply 18-30 V DC Output 20 mA Scanning 6 bit Gray-Code Rotation angle max. 150
+20 mA
OEC 2-3--6
410
C23
direction-signal right
-20 mA
direction-signal left
40 41 42 43
54
Cable Liy(c) 14 x 0,25 mm2 2000 mm long wired on connector DA 15 with end splice Prepared for mounting encoder adjusting-angle switching-gear ^ = encoder Prepared for mounting encoder adjusting-angle variable. Additional price per metre cable Liy(c) 14 x 0,25 mm
2
(C) (C)
Industrial controllers
Opto-electronic encoder Output digital OEC 4 with Profi-Bus System DP with attach to our switching device
Type OEC 4-1-1-2 OEC 4-2-1-2 OEC 4-3--2 OEC 4-4--2 OEC 4-5--2 OEC 4-6--2 Weight gramm 820 820 820 820 820 820 Part No. 52410...
1/244
2005 Price EURO
Pos. 1 2 3 4 5 6 7 8
for mounting on: V 6 / D 64 / V 11 / S 2 / S 6 / N 6 Opto-electronic encoder 8 Bit Gray-Code T 496 8 Bit Binary-Code T 496 6 Bit Gray-Code T 496 6 Bit Binary-Code T 496 9 Bit Gray-Code T 497 9 Bit Binary-Code T 497
1 2 3 4 5
= Output characteristic = Linear = Quadratic = Progressive = Linear one sided right turn = Linear one sided left turn direction-signal left
Technical data Power supply 18-30 V DC, Output 6, 8 or 9 Bit, Scanning Gray-Code Communication Profibus DP (DIN 19245 Part 3) Ident.-No. 045 CH address 123 D (7 BH), other address by enquiry Rotation angle max. 150 (360), with connection for OEC 2 look catalog 1/241 direction-signal right
9 Bit direction-signal
0 42 3 12 35 3 80 35
360
6 h9
20 h11
DA 15 DA 9
16 39 40 41 42 43
Connector DE 9 without wiring for Profibus-connection Cable Liy(c) 14 x 0,25 mm2 450 mm long wired on 2 connectors DA 15 for OEC 4 / OEC 2 ^ encoder Prepared for mounting encoder adjusting-angle switching-gear = Prepared for mounting encoder adjusting-angle variable Additional price per metre cable Liy(c) 14 x 0,25 mm2
R5
(C) (C)
55
Industrial controllers
1/246
2005 Price EURO
Pos. 2
for mounting on: V 6 / V 11 / D 64 / S 2 / S 6 / N 6 Inductive transducer IG 1 1 4 110 V / 50 Hz 5 2 Technical data 7 Mechanical life 2x10 switching cycles 74 V / 50 Hz Input voltage AC 110 V, 50 Hz Output voltage AC 74 V, 50 Hz 6 Transfer power max. 3 VA Rotation angle, max. 90 80 60 40 20 RA = RA = 5 K RA = 3 K RA = 1 K
Type I
RA = RA = 5 K RA = 3 K RA = 1 K
90 3
60
40
20
20
40
60
90 T 434 I
Inductive transducer IG 1 with matching electronic Ey / 55 10 V DC 1 1 110 V / 50 Hz 5 2 + 10 V DC (15 V DC) 6 4 3 3 4 1 2 Matching electronic Ey / 55 RA = 5 K 5 UA 10 V DC 6
20 90 60 40 20 0
40
60
90
- 10 V DC (15 V DC)
20 41 42
56
Transformer with capacitor 4 mF for connection 220 V 50 Hz Prepared for mounting transducer adjusting-angle switching-gear ^ = transducer Prepared for mounting transducer adjusting-angle variable.
Industrial controllers
1/280
2005 Price EURO
Pos.
Type
Knob solid 42 mm
KBAD 66
35
GK1
KHS/177
25
GK2
Knob 42 mm with push button operated by twisting the upper knob half
KBAD/230
170
GK3
Knob 25 mm with M 6
KBAD 271
10
GK4
Knob 27 mm with M 8
KBAD 302
15
GK5
Knob solid 29 mm
KBAD/141
70
GS6
KBAD/210
60
GS7
T-grip solid 28 mm x 58 mm
KBAD 148
50
Q8
KBAD 147
60
Q9
10
T-grip solid 28 mm x 80 mm
KBAD 355
50
Q10
11
KBAD 329
60
Q11
12
21
Cable 4 x 0,25 mm2 x 450 mm long, wired included Pos. 1 12 Additional price per metre cable 4-pole
57
Industrial controllers
1/281
2005
Type
operator handles
Q8
Q9
Q10 Q11
B1
B2
B3
B4
B5
B6
B7/8
B9
B10
V6
VV 6
V 11
V5
VV 5
V8
VV 8
V 10
V 14
V3 D/ DD 64 D8
D3
S2
S 21
S 22
SS 22
S 23
S3
S 14
S6
58
X = DESIGN PRACTICABLE
Industrial controllers
Palm grip B 1
1/284
2005
The palm grip B 1 is an actuating element for our multi-axis and single-axis controller. It can also be used as an actuating element with hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. These devices have micro changeover contacts. The palm grip has a highly flexible cable 4 (8) x 0,25 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole M 8 or M 10 (standard = M 10).
116
The palm grip B 1 is made of PPO plastic and is black in colour. Contact complement 2 A 250 V AC 15 / 3 A 24 V DC 13 or 0,5 A 250 V AC 15 / 1,5 A 24 V DC 13 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Operating Storage -40C to +60C -50C to +80C
8 with M 8 or 10 with M 10
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos.
Contactcomplement
Weight gramm
Type
Price EURO
Without built in
KBAD / 22
100
B1
2 3 4
Rocker switch top tast-0-tast Rocker switch top tast-0-rest Rocker switch top rest-0-rest
KBAD / 46
120
B1W
T-0-T KBAD / 49
2 change over contacts 2 A 250 V AC 15 1 change over contact 0,5 A 250 V AC 15 2 change over contacts 2 A 250 V AC 15 2 change over contacts 0,5 A 250 V AC 15
130
B 1 WD
T-0-T KBAD / 67
140
B 1 WDD
7 8
Push button top with mechanical operation KBAD / 27 Push button top KBAD / 25
1 change over contact 0,5 A 250 V AC 15 2 change over contacts 0,5 A 250 V AC 15 3 change over contacts 0,5 A 250 V AC 15
120 100
B1T B1D
9 10
Push button top with 1 push button side Push button top with 2 push button side
120 130
B 1 DD B 1 DDD
KBAD / 47
11 12 13
KBAD / 50
B1D B 1 DD B 1 DDD
14
Push button top with Rocker switch side tast-0-tast (protection IP 41) T-0-T
KBAD / 75
1 change over contact 0,5 A 250 V AC 15 2 change over contacts 0,5A 250V AC 15
120
B 1 DW
15 16 17
Lever switch side 0-tast mechanical operation KBAD / 126 Lever switch side 0-tast 1 contact KBAD / 54 change over contacts Lever switch side 0-tast 2 contacts 2 A 250 V AC 15 Cable 4 res. 8 x 0,25 mm2 x 450 mm long wired included Pos. 1-17 Additional price per metre cable 4-pole Additional price per metre cable 8-pole
B 1 KT B1K B 1 KK
21 22
59
Industrial controllers
Palm grip B 2
1/285
2005
The palm grip B 2 is an actuating element for our multi-axis controller V 8. It can also be used as an actuating element for hydraulic drives. With each of the two push button one direction-contact (micro change over contact) also one potentiometer pushed. These palm grip realised the 3. direction 9-10 (3. axis) on our multi-axis controller V 8. The palm grip has a highly flexible cable 8 x 0,25 mm2 x 450 mm long.
Direction of view
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos.
Weight gramm Palm grip with mounting piece for control-handle 200
Type
Price EURO
B2
30
2 direction-contacts
30
4 5 6 10
2 wire-wound potentiometer T 239 linear life 5 x 106 switching cycles resistance 1,2,5 kOhm 1 Watt wiper current max. 10 mA 2 conductive-plastic potentiometer T 301 linear life 107 switching cycles resistance 1,2,5 kOhm 0,5 Watt wiper current max. 1 mA more potentiometer e.t.c. look catalog 1/240 Impedance converter Input 15 Volt, Output 10 V /5 mA Cable 8 x 0,25 mm2 x 450 mm long wired included Pos. 1-10 Additional price per metre cable 8-pole
60 50
PP PP
50
22
60
Industrial controllers
Palm grip B 3
1/286
2005
The palm grip B 3 is an actuating element for our multi-axis controller V 8, VV 8, V 6, VV 6, VV 5. It can also be used as an actuating element for hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. The drives with potentiometer PA 11/12 and PA 13 realised the direction 11-12 resp. 13-14 (3. resp. 4 axis) on our multi-axis controllers. The palm grip has a highly flexible single wire 0,1 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole 12 or 10 mm (standard = 12 mm). The palm grip B 3 is made of PPO plastic and is black in colour. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Operating Storage -40C to +60C -50C to +80C
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 Drive with potentiometer PA 11 actuating by rocker wheel installed Pos. left or right with spring return in the centre position 1 conductive-plastic potentiometer T 375 with centre tap Linear 107 switching cycles resistance 2 x 5 kOhm 0,5 Watt wiper-current max. 1 mA 2 direction-contacts Drive with potentiometer PA 12 actuating installed Pos. 11 + 12 by push button (details exactly PA 11) Drive with potentiometer PA 13 actuating by rotating palm grip left resp. right with spring return in the centre position 1 conductive-plastic potentiometer T 375 with centre tap Linear 107 switching cycles resistance 2 x 5 kOhm 0,5 Watt wiper current max. 1 mA, 2 direction-contacts Drive with potentiometer PA 15 actuating by lever switch with spring return in 0-position, 1 conductive-plastic potentiometer T 375 Linear 107 switching cycles resistance 5 kOhm 0,5 Watt wiper current max. 1 mA, 1 direction-contact Vibrator button actuating through solenoid 24 V DC impulse signal 100% duty cycle factor (e.g. indication of cable movement) Sensor button and res. or annexed with a regulator electronic board EY/ 42-10 or -11 24 V DC (separate) Palm grip with mounting piece for control-handle Push button Rocker switch tast-0-tast Rocker switch tast-0-rest Rocker switch rest-0-rest Lever switch Sliding switch tast-0-tast Sliding switch rest-0-rest 1 NO T-0-T 2 NO T-0-R 2 NO R-0-R 2 NO 1 NO T-0-T 2 NO R-0-R 2 NO installed Pos. 13 + 14 installed Pos. 13 + 14 installed Pos. 1, 2, 3, 4, 5, 6 installed Pos. 1 + 2 installed Pos. 1 + 2 installed Pos. 1 + 2
Type B3 D W W W K ST SR ZD
Price EURO
Push button with 2 steps Latch for mechanical installed Pos. 11 + 12 zero interlock 4 contacts arrangement MS 212 look catalog 5/001
90
PA 11
12 13
90 90
PA 12 PA 13
15
90
PA 15
20 21 22 23
60 20
V SE
30 31
Bellow for palm grip B 3 drawing No. KMD 109 required for multi-axis controller V 8, VV 8 Bellow for palm grip B 3 drawing No. KMD 190 and front plate with 4 screws M5 x 15 (for mounting the bellow) drawing No. KBF 905 required for multi-axis controller V 6, VV 6, VV 5
32 33
61
Industrial controllers X
Palm grip B 3
1/287
2005
76 Drive with potentiometer PA 11 Direction 11-12 Left or right available 25 degree Vibration button 3
45
6 32
Sensor button function on each or both sides Lever switch or drive with potentiometer PA 15 Drive with potentiometer PA 13 Direction 13-14 actuating by rotating 25 degree
10
Screw M6 x 10
12 View X 70
2 1
Edition: Vibrator button only one Drive with potentiometer PA 13 version Drive with potentiometer PA 15 possible
2 1
Edition: Sliding switch installed Pos. 13, 14 installed Pos. 1, 2, 4, 6 inapplicable Drive with potentiometer PA 12 direction 11 - 12 installed Pos. 11, 12 PA 11 inapplicable Push button with 2 steps ZD installed Pos. 11 - 12 PA 11, 12 inapplicable B3 D W K SE PA 11 PA 13 X Special please to describe Drive with potentiometer PA 13 Drive with potentiometer PA 11 Sensor button
13
Example for type-sign Palm grip Push button Rocker switch Lever switch
62
11
14
12
152
Industrial controllers
Palm grip B 4
1/288
2005
The palm grip B 4 is an actuating element for our multi-axis controller V 10, V 11, V 14. It can also be used as an actuating element for hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. The drive with potentiometer PA 11 realised the direction 11-12 (3. axis) on our multi-axis controllers. The palm grip has a highly flexible single wire 0,1 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole 8 mm. The palm grip B 4 is made of PPO plastic and is black in colour. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Operating Storage -40C to +60C -50C to +80C
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
Pos. 1 2 3 5 6 10 11 Drive with potentiometer PA 11 actuating by rocker wheel with spring return in the centre position 1 conductive-plastic potentiometer T 394 with centre tap Linear 107 switching cycles resistance 2 x 5 kOhm 0,5 Watt wiper current max. 1 mA 2 direction-contacts Palm grip with mounting piece for control-handle Push button 1 NO 100 mA 24 V DC 13
Type B4 D
Price EURO
90
PA 11
30 31 32 33
63
Industrial controllers 35
Palm grip B 5
1/289
2005
The palm grip B 5 is an actuating element for our multi-axis and single-axis controller. It can also be used as an actuating element for hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. The palm grip has a highly flexible cable 4 (8) x 0,25 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole M 8 or M 10 (standard = M 10). The palm grip B 5 is made of PPO plastic and is black in colour.
91
Contact complement 2 A 250 V AC 15 / 3 A 24 V DC 13 or 0,5 A 250 V AC 15 / 1,5 A 24 V DC 13 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Operating Storage -40C to +60C -50C to +80C
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Contactcomplement
Weight gramm
Type
Price EURO
without built in
KBAD / 254
100
B5
2 3 4 5
Rocker switch top tast-0-tast Rocker switch top tast-0-rest Rocker switch top rest-0-rest Rocker switch top tast-0-tast with push button side
KBAD / 248
120
B5W
KBAD / 294
130
B 5 WD
7 8
120 100
B5T B5D
KBAD / 252
120
B 5 DD
11 12
KBAD / 246
110 120
B5D B 5 DD
21 22
64
Cable 4 res. 8 x 0,25 mm 2 x 450 mm long wired included in Pos. 1-12 Additional price per metre cable 4-pole Additional price per metre cable 8-pole
Industrial controllers
Palm grip B 6
1/290
2005
38
The palm grip B 6 is an actuating element for our multi-axis and single-axis controller. It can also be used as an actuating element with hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. These devices have micro changeover contacts. The palm grip has a highly flexible cable 4 (8) x 0,25 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole M 8 or M 10 (standard = M 10).
104
The palm grip B 6 is made of PPO plastic and is black in colour. Contact complement 2 A 250 V AC 15 / 3 A 24 V DC 13 or 0,5 A 250 V AC 15 / 1,5 A 24 V DC 13 Permissible ambient temperature Operating Storage -40C to +60C -50C to +80C
Climate resistance Damp heat constant Damp heat cyclic Degree of protection front
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Weight gramm
Type
Price EURO
KBAD/
120
B6K
2 3 4 5
Lever switch side 0-tast with rocker switch top tast-0-tast with rocker switch top tast-0-rest with rocker switch top rest-0-rest Lever switch side 0-tast with push button top
KBAD/
130
B 6 KW
KBAD/
130
B 6 KD
21 22
Cable 4 res. 8 x 0,25 mm2 x 450 mm long wired included Pos. 1-5 Additional price per metre cable 4-pole Additional price per metre cable 8-pole
65
Industrial controllers
Notice
66
Industrial controllers
Palm grip B 7 / B 8
1/292
2005
The palm grip B 7 is an actuating element for our multi-axis controller V 8, VV 8, V 6, VV 6, VV 5 design left, B 8 for design right. It can also be used as an actuating element for hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. The palm grip has a highly flexible single wire 0,1 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole 12 or 10 mm (standard = 12 mm). The palm grip B 7/8 is made of PPO plastic and is black in colour. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Operating Storage -40C to +60C -50C to +80C
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 20 21 22 23 Palm grip with mounting piece for control-handle design left Palm grip with mounting piece for control-handle design right Push button Rocker switch tast-0-tast Rocker switch tast-0-rest Rocker switch rest-0-rest Lever switch T-0-T T-0-R 1 NO 2 NO 2 NO installed Pos. 1, 2, 3, 4, 5, 6, 7, 8 installed Pos. 2, 3, 4 installed Pos. 2, 3, 4 installed Pos. 2, 3, 4
Type B7 B8 D W W W K V SE
Price EURO
R-0-R 2 NO 1 NO
Vibrator button actuating through solenoid 24 V DC impulse signal 100% duty cycle factor Sensor button and res. or annexed with a regulator electronic board EY / 42-10 or -11 24 V DC (separate)
30 31
Bellow for palm grip B 7/8 drawing No. KMD 109 required for multi-axis controller V 8, VV 8 Bellow for palm grip B 7/8 drawing No. KMD 190 and front plate with 4 screws M5 x 15 (for mounting the bellow) drawing No. KBF 905 required for multi-axis controller V 6, VV 6, VV 5
32 33
67
Industrial controllers
Palm grip B 7 / B 8
1/293
2005
B7
63
54
2 1 6 5
Lever switch
Sensor button
B8
63
54
3 4
142 12 80 B7 D K V SE X 10
Vibrator button
Lever switch
Sensor button
Screw M 6 x 10
68
Industrial controllers
Palm grip B 9
1/294
2005
The palm grip B 9 is an actuating element for our multi-axis controller V 8, VV 8, V 6, VV 6, VV 5. It can also be used as an actuating element for hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. The drives with potentiometer PA 11 and PA 13 realised the direction 11-12 resp. 13-14 (3. resp. 4 axis) on our multi-axis controllers. The palm grip has a highly flexible single wire 0,1 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole 12 or 10 mm (standard = 12 mm). The palm grip B 9 is made of PA plastic and is grey in colour. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Operating Storage -40C to +60C -50C to +80C
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
Pos. 1 2 3 5 6 10 11 Drive with potentiometer PA 11 actuating by rocker wheel with spring return in the centre position 1 conductive-plastic potentiometer T 394 with centre tap Linear 107 switching cycles resistance 2 x 5 kOhm 0,5 Watt wiper current max. 1 mA, 2 direction-contacts Drive with potentiometer PA 13 actuating by rotating palm grip left resp. right with spring return in the centre position 1 conductive-plastic potentiometer T 375 with centre tap Linear 107 switching cycles resistance 2 x 5 kOhm 0,5 Watt wiper current max. 1 mA, 2 direction-contacts Palm grip with mounting piece for control-handle Push button Cross switch tast-0-tast Cross switch rest-0-rest 1 NO T-0-T / T-0-T 4 NO R-0-R / R-0-R 4 NO installed Pos. 1, 2, 3, 4, 5, 6
Type B9 D KT KR
Price EURO
90
PA 11
13
90
PA 13
30 31
Bellow for palm grip B 9 drawing No. KMD 109 required for multi-axis controller V 8, VV 8 Bellow for palm grip B 9 drawing No. KMD 190 and front plate with 4 screws M5 x 15 (for mounting the bellow) drawing No. KBF 905 required for multi-axis controller V 6, VV 6, VV 5
32 33
69
Industrial controllers
Palm grip B 9
1/295
2005
4 5 6
Screw M 6 x 10
10
12 80 85
B 9 D KT PA 11 PA 13 X
70
174
Industrial controllers
1/296
2005
The palm grip B 10-1 is an actuating element for double-handle controller D 64, DD 64, D8. Control-handle left, B10-2 for control-handle right. It can also be used as an actuating element for hydraulic drives. Push buttons, rocker switches, e.t.c., can also be fitted to suit appropriate requirements. The palm grip has a highly flexible single wire 0,1 mm2 x 450 mm long. The mounting piece for the drive rod can be supplied with a tapped hole 10 mm. The palm grip B 10 is made of PPO plastic and is black in colour. Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Operating Storage -40C to +60C -50C to +80C
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 20 Palm grip with mounting piece for control-handle left Palm grip with mounting piece for control-handle left with annex component Palm grip with mounting piece for control-handle right Palm grip with mounting piece for control-handle right with annex component Push button 1 NO B 10-1 installed Pos. 1, 2, 3 T-0-T T-0-R R-0-R 2 NO 2 NO 2 NO B 10-2 installed Pos. 4, 5, 6
Price EURO
Vibrator button actuating through solenoid 24 V DC impulse signal 100% duty cycle factor
71
Industrial controllers
1/297
2005
B 10-1
37 100 Vibrator button
1 79,5
B 10-2
65 Vibrator button
Rocker switch
B 10-1
D W V
72
1/350
2005 Price EURO
Pos.
Steel sheet housing material thickness 1/1,5 mm Protection IP 54 painting RAL 7032 pebble-grey 1 2 3 4 5 6 7 8 9 10 11 12 150 x 400 x 105 150 x 500 x 105 150 x 600 x 105 260 x 500 x 105 260 x 600 x 105 Dimensions special Plastic housing polycarbonat Protection IP 65 colour RAL 7035 fair-grey 13 14 15 16 17 18 19 20 21 22 Plastic housing polyester Protection IP 65 colour RAL 7000 grey 23 24 25 26 27 28 29 30 31 32 Accessory parts 33 34 35 36 37 38 39 40 41 42 43 44 45
73
200 x 200 x 92 230 x 230 x 105 230 x 340 x 105 230 x 440 x 105 250 x 250 x 150
166 x 166 x 90 196 x 196 x 102 196 x 306 x 102 196 x 406 x 102 216 x 216 x 147 116 x 366 x 102 116 x 466 x 102 116 x 566 x 102 226 x 466 x 102 226 x 566 x 102 on enquiry
1,30 1,40 1,50 1,60 1,60 3,20 3,50 3,80 3,80 4,20
B 200 B 230 B 230 x 340 B 230 x 440 B 250 x 250 B 150 x 400 B 150 x 500 B 150 x 600 B 260 x 500 B 260 x 600
120 x 122 x 105 120 x 160 x 140 160 x 240 x 120 160 x 360 x 100 230 x 300 x 110
113 x 115 x 98 113 x 134 x 133 153 x 215 x 114 153 x 352 x 94 223 x 293 x 103
I 120 x 122 I 120 x 160 I 160 x 240 I 160 x 360 I 230 x 300
220 x 335 x 115 220 x 465 x 115 250 x 255 x 120 250 x 400 x 120 250 x 600 x 120
200 x 292 x 108 200 x 432 x 108 236 x 243 x 110 236 x 386 x 110 236 x 586 x 110
colour alternative RAL 9011 black colour alternative RAL 9011 black
I 220 x 335 I 220 x 465 I 250 x 255 I 250 x 400 I 250 x 600
Hinges each housing (2 pcs.) Armrest with clamp adjustable straps Chest panel and straps Base bracket each housing (2 pcs.) Filter plug M 20 Cable entry M 20 cable 713 mm Cable entry M 32 cable 1121 mm Cable entry M 40 cable 1928 mm Pillar with flange 100 x 100 x 535 mm high Indicating labels not engraved Engraved each 10 characters for air-condition with anti-kink protection and strain relief with anti-kink protection and strain relief with anti-kink protection and strain relief flange 150 x 150 mm
Industrial controllers
Notice
74
Industrial controllers
Command and indicating devices for 22 mm mounting diameter to install in our housing
1/360
2005
Manufacture Siemens 3 SB 22 mm Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Command devices Push button Selector switch 0-1 Selector switch 1-0-2 1 NO + 1 NC 1 NO + 1 NC 2 NO + 2 NC Weight gramm 2 positions 3 positions 40 50 60 Part No. Type D W W Price EURO
2 positions 3 positions
1 NO + 1 NC 2 NO + 2 NC
130 140
S S
1 NO + 1 NC 1 NC
80 60
PS PV
1 NO + 1 NC
10
16 17 18 19 20
Illuminated push button lamp 24 V AC Illuminated push button lamp 110 V operating voltage 220 V AC Illuminated push button lamp 24 V with transformer 220/24 V AC Contact block additional (max. 3 pcs.) Indicating devices
1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC
40 40 50 10
LD LD LD
21 22 23 24 25
Indicator light lamp 24 V AC Indicator light lamp 110 V operating voltage 220 V AC Indicator light lamp 24 V with transformer 220/24 V AC
40 40 50
L L L
Push button with 2 steps RTTG22KLK../MHR3/MT97/MTO Push button with 2 steps XB 2 - BA 243
2 NO + 1 NC 2 NO + 1 NC
200 250
75
Industrial controllers
Command and indicating devices for 30 mm mounting diameter to install in our housing
1/361
2005
Manufacture Siemens 3 SB 30 mm Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Command devices Push button Selector switch 0-1 Selector switch 1-0-2 1 NO + 1 NC 1 NO + 1 NC 2 NO + 2 NC Weight gramm 2 positions 3 positions 50 60 70 Part No. Type D W W Price EURO
2 positions 3 positions
1 NO + 1 NC 2 NO + 2 NC
140 150
S S
1 NO + 1 NC 1 NC
90 70
PS PV
1 NO + 1 NC
10
16 17 18 19 20
Illuminated push button lamp 24 V AC Illuminated push button lamp 110 V operating voltage 220 V AC Illuminated push button lamp 24 V with transformer 220/24 V AC Contact block additional (max. 2 pcs.) Indicating devices
1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC
50 50 60 10
LD LD LD
21 22 23 24 25
Indicator light lamp 24 V AC Indicator light lamp 110 V operating voltage 220 V AC Indicator light lamp 24 V with transformer 220/24 V AC
50 50 60
L L L
Special devices 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Drilling diameter 30 mm Blind plug 30 Push button with 2 steps SES 2 Push button with 2 steps ST 1-3-2 Push button with 3 steps ST 1-4-3 Push button with 4 steps ST 1-5-4 Push button with potentiometer PT 1-2-P Wire-wound potentiometer T 237 linear Life 106 switching cycles resistance 0,5/1,0/2,0/5,0 kOhm 1 Watt wiper current max. 10 mA Drive for potentiometer KEQ/418 with friction brake (potentiometer look 1/240) Summer EKS 24 V DC / 48 V AC / 220 V AC Knee button FAK-S/KC/I Foot button 3SE 3902- OAB20 2 NO + 1 NC 2 NO + 1 NC 3 NO + 1 NC 4 NO + 1 NC 1 NO + 1 NC 300 300 350 400 350
1 NO + 1 NC 1 NO + 1 NC
76
Industrial controllers
2/020
2005
The crane control unit KST 2 combines in its design the crane drivers seat and the control and monitoring devices. Ready wired, it can be easily and quickly installed in the crane cabin.
Equipment boxes: Sheet steel. The equipment boxes with the devices fitted have hinged tops that can be locked in position. They contain the termination and connection facilities and a lockable plug-in cover on the inside. Seat KFS 2: The seat backrest can be tipped forwards and further tipped together with the cushion. The cushion and seat backrest are padded. Adjusting possibilities: Cushion horizontally and vertically. Height adjustment via a gas-loaded spring in the seat base. Seat backrest horizontally and vertically to the cushion. Armrests padded and adjustable in height. Fixed to the equipment boxes. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pebble-grey. All non-painted metal parts are electrogalvanized and chromed.
Pos. 1 2 3 4 5 10 11 12 13 14 15 20 21 22 23 24 25 30 31 32 33 34 35 40 41 42 43 Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm with wiring wire 1,5 mm each terminal
2 2
Weight kg Crane control unit with drivers seat Crane control unit with drivers seat Crane control unit without drivers seat Crane control unit without drivers seat KFS 2 KFS 2 KFS 2 KFS 2 with base plate without base plate with base plate without base plate 38 33 23 18
Part No.
Price EURO
Drivers seat
KFS 2
Drivers seat
KFS 4
KFS 9
KL KL
External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre
77
Industrial controllers
2/021
2005
Protection IP 54
Direction of view
Cutting
View X
Cutting 105 x 240 Version shown for left-hand installation (right-hand side installation is mirror image)
78
Industrial controllers
2/030
2005
The crane control unit KST 3 combines in its design the crane drivers seat and the control and monitoring devices. Ready wired, it can be easily and quickly installed in the crane cabin.
Equipment boxes: Plastic polyester. The equipment boxes with the devices fitted have hinged tops that can be locked in position. They contain the termination and connection facilities and a lockable plug-in cover on the inside. Seat KFS 2: The seat backrest can be tipped forwards and further tipped together with the cushion. The cushion and seat backrest are padded. Adjusting possibilities: Cushion horizontally and vertically. Height adjustment via a gas-loaded spring in the seat base. Seat backrest horizontally and vertically to the cushion. Armrests padded and adjustable in height. Fixed to the equipment boxes. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pebble-grey. All non-painted metal parts are electrogalvanized and chromed.
Pos. 1 2 3 4 5 10 11 12 13 14 15 20 21 22 23 24 25 30 31 32 33 34 35 40 41 42 43 Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm with wiring wire 1,5 mm each terminal
2 2
Weight kg Crane control unit with drivers seat Crane control unit with drivers seat Crane control unit without drivers seat Crane control unit without drivers seat KFS 2 KFS 2 KFS 2 KFS 2 with base plate without base plate with base plate without base plate 36 31 21 16
Part No.
Price EURO
Drivers seat
KFS 2
Drivers seat
KFS 4
KFS 9
KL KL
External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre
79
Industrial controllers
2/031
2005
Protection IP 54
Direction of view
Cutting
Cutting 105 x 240 View X Version shown for left-hand installation (right-hand side installation is mirror image)
80
Industrial controllers
2/040
2005
The swivelling crane control unit KST 4 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment boxes: Sheet steel. The equipment boxes with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through aduct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 9, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension, right equipment box turnable. Cross-member: Steel selection, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 180 right, 90 left, stopped by friction brake. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. All non-painted metal parts are electrogalvanized and chromed.
Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection
Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 30 31 32 33 40 41 42 Crane control unit standard design Crane control unit standard design Equipment boxes 160 x 420 mm Equipment boxes 200 x 420 mm
Weight kg 58 60
Part No.
Price EURO
KST 4x
Headrest for drivers seat KFS 9 additional variations for drivers seat KFS 9 look catalog 2/140
Heating 2 x 2 kW with ventilator 230 V 50 Hz airvolume ca. 300 m3/h mounted on the swivel base sidewise Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360 KL KL
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
81
Industrial controllers
2/041
2005
B 560 Protection IP 54
490 32
82
610 32
1000 32
200
470 25 Horizontal adjustment of seat 90 90 Horizontal adjustment of equipment boxes 25 25 left box
Direction of view
Seat
right box
View X
82
Industrial controllers
2/050
2005
The swivelling crane control unit KST 5 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment boxes: Sheet steel. The top panel of the equipment boxes with the devices can be raised and locked in position. The terminal strip is easily accessible via an opening on the inside that can be closed with a lockable cover. Seat: Comfortable spring mounted seat KFS 9, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 180 right, 90 left, stopped by friction brake. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey. All non-painted metal parts are electrogalvanized and chromed.
Description data look catalog 5/003/004 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 30 31 32 33 40 41 42 Crane control unit standard design Crane control unit standard design Crane control unit standard design Crane control unit standard design Equipment boxes 200 x 580 mm Equipment boxes 270 x 580 mm Equipment boxes 320 x 580 mm Equipment boxes special dimensions
Weight kg 84 88 92
Part No.
Price EURO
Headrest for drivers seat KFS 9 additional variations for drivers seat KFS 9 look catalog 2/140 Drivers seat KFS 10 look catalog 2/142 Monitor mounting support left or right T 478 Footrest mounted onto swivel base adjustable 15 mm Manual adjustment of equipment boxes horizontal adjustable 75 mm Plate for horizontal manual adjustment of control unit adjustable 250 mm Manual adjustment of control unit vertical (gas loaded spring) adjustable 80 mm 10 8
KFS 10
95 25
Motorized adjustment of control unit swivelling (drive 24 V DC seat height + 30 mm) Heating 2 x 2 kW with ventilator 230 V 50 Hz airvolume ca. 300 m3/h mounted on the swivel base sidewise Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
KL KL
83
Industrial controllers
2/051
2005
B A 600 A Protection IP 54
500 32
= 28 7x4 20,5
82
562
1012 32
360
weight loaded Dimension Dimension A B 200 270 320 1000 1140 1240
75
90
180
Direction of view
View X
left box
100
300
15
84
240
Industrial controllers
2/060
2005
The swivelling crane control unit KST 6 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment boxes: plastic PU foam The equipment boxes with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through aduct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 9, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 180 right, 90 left, stopped by friction brake. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. All non-painted metal parts are electrogalvanized and chromed.
Description data look catalog 5/003/004 Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 30 31 32 33 40 41 42 Crane control unit standard design Crane control unit standard design Crane control unit standard design
Part No.
Price EURO
Headrest for drivers seat KFS 9 additional variations for drivers seat KFS 9 look catalog 2/140
95
Heating 2 x 2 kW with ventilator 230 V 50 Hz airvolume ca. 300 m3/h mounted on the swivel base sidewise Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360 KL KL
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
85
Industrial controllers
2/061
2005
Protection IP 54
490 32
1000 32
left box
Rotation radius ,C - bei minimal adjusting = 520 mm Rotation radius ,C - bei maximal adjusting = 620 mm
Floor mounting
86
Industrial controllers
2/070
2005
The crane control unit KST 7 combines in its design the crane drivers seat and the control and monitoring devices. Ready wired, it can be easily and quickly installed in the crane cabin.
Equipment boxes: Sheet steel. The equipment boxes with the devices fitted have hinged tops that can be locked in position. They contain the termination and connection facilities and a lockable plug-in cover on the inside. Seat KFS 2: The seat backrest can be tipped forwards and further tipped together with the cushion. The cushion and seat backrest are padded. Adjusting possibilities: Cushion horizontally and vertically. Height adjustment via a gas-loaded spring in the seat base. Seat backrest horizontally and vertically to the cushion. Armrests padded and adjustable in height. Fixed to the equipment boxes. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pebble-grey. All non-painted metal parts are electrogalvanized and chromed.
Pos. 1 2 3 4 5 10 11 12 13 14 15 20 21 22 23 24 25 30 31 32 33 34 35 40 41 42 43 Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 caracters Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm with wiring wire 1,5 mm each terminal
2 2
Weight kg Crane control unit with drivers seat Crane control unit with drivers seat Crane control unit without drivers seat Crane control unit without drivers seat KFS 2 KFS 2 KFS 2 KFS 2 with base plate without base plate with base plate without base plate 51 46 36 31
Part No.
Price EURO
Drivers seat
KFS 2
Drivers seat
KFS 4
Drivers seat Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices
look catalog 2/140 look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360
KFS 9
KL KL
External wiring single wire highly flexible 1,5 mm2 x 5 metre long Additional or subtract price each metre
87
Industrial controllers
2/071
2005
Protection IP 54
Direction of view
Cutting
View X
Version shown for left-hand installation (right-hand side installation is mirror image)
88
Industrial controllers
2/072
2005
The crane control unit KST 75 combines in its design the crane drivers seat and the control and monitoring devices. Ready wired, it can be easily and quickly installed in the crane cabin.
Equipment boxes: Sheet steel. The equipment boxes with the devices fitted have hinged tops that can be locked in position. They contain the termination and connection facilities and a lockable plug-in cover on the inside. Seat KFS 2: The seat backrest can be tipped forwards and further tipped together with the cushion. The cushion and seat backrest are padded. Adjusting possibilities: Cushion horizontally and vertically. Height adjustment via a gas-loaded spring in the seat base. Seat backrest horizontally and vertically to the cushion. Armrests padded and adjustable in height. Fixed to the equipment boxes. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pebble-grey. All non-painted metal parts are electrogalvanized and chromed.
Pos. 1 2 3 4 5 10 11 12 13 14 15 20 21 22 23 24 25 30 31 32 33 34 35 40 41 42 43 Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm with wiring wire 1,5 mm each terminal
2 2
Weight kg Crane control unit with drivers seat Crane control unit with drivers seat Crane control unit without drivers seat Crane control unit without drivers seat KFS 2 KFS 2 KFS 2 KFS 2 with base plate without base plate with base plate without base plate 51 46 36 31
Part No.
Price EURO
Drivers seat
KFS 2
Drivers seat
KFS 4
Drivers seat Multi-axis controller Single-axis controller Double-handle Control-switch Command and indicating devices
look catalog 2/140 look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360
KFS 9
KL KL
External wiring single wire highly flexible 1,5 mm2 x 5 metre long Additional or subtract price each metre
89
Industrial controllers
2/073
2005
210 75
450 (610) 75
210 Protection IP 54
KFS 2 180
X 570
80
30
750
180
220 180
Cutting 62
250 300 18
Base plate for KFS 4, 9 (according to 2/132...141) 320 500 320 610 - 780 View X without base plate 20 30 300 320 Cutting 62 250 375 1030 9 250 375
220
340 340
25 45 Version shown for left-hand installation (right-hand side installation is mirror image)
90
Industrial controllers
2/080
2005
The swivelling crane control unit KST 8 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment boxes: plastic PU foam The equipment boxes with the devices can be vertically and horizontally adjusted together with the armrests. Cabling is run through aduct in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 9, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Right equipment box turnable. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 180 right, 90 left, stopped by friction brake. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. All non-painted metal parts are electrogalvanized and chromed.
Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection
Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 30 31 32 33 40 41 42 Crane control unit standard design Crane control unit standard design Crane control unit standard design
Part No.
Price EURO
Headrest for drivers seat KFS 9 additional variations for drivers seat KFS 9 look catalog 2/140
95
Heating 2 x 2 kW with ventilator 230 V 50 Hz airvolume ca. 300 m3/h mounted on the swivel base sidewise Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360 KL KL
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
91
Industrial controllers
2/081
2005
Protection IP 54
490 32
470 25
left box
1000 32
Seat
right box
Floor mounting
830 25
92
Industrial controllers
2/082
2005
The crane control unit KST 85 is ergonomically designed and provides a high degree of comfort. The standard design includes following. Equipment boxes: plastic PU foam The equipment boxes with the devices can be vertically and horizontally adjusted together with the armrest. Cabling is run through aduct on the terminal block. (The terminal block housing is mounting behind the seat) Seat: Comfortable static mounted seat KFS 8, covered with air-permeable artificial leather or with textil material and with roller-bearing swivel system. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Seat with the equipment boxes swivelled 90 one sided. Endpoints to look. Right equipment box turnable. Console: Heating 2 steps 2 x 2 kW 380 V AC Ventilator 380 V AC air volume ca 1000 m3/h air circulation (opening in the rear side of the console) fresh air circulation (opening in the underside of the console). Selector switch for heating/ventilator are in the box. The seat can be tilted forward to reach the terminal block of the heating / ventilator. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. All non-painted metal parts are electrogalvanized and chromed.
Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection
Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 30 31 32 33 40 41 42 Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360 Crane control unit standard design with heating/ventilator Crane control unit standard design without heating/ventilator
Weight kg 48 45
Part No.
Price EURO
Headrest for drivers seat KFS 8 additional variations of drivers seat KFS 8 look catalog 2/138
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
KL KL
93
Industrial controllers
2/083
2005
Protection IP 54
568 32
1078 32
470 25
left box
Seat
right box
View X
Direction of view
Middlepoint Seat
94
Industrial controllers
2/090
2005
The swivelling crane control unit KST 9 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment boxes: Top panel made of plastic PU foam, bottom made of sheet steel. The top panel box with the devices can be raised and locked in front position. The terminal strip is easily accessible via an opening on the outside of the bottom, that can be closed with a lockable cover. The front edge of the top panel is angled and is therefore visuably better for the crane driver. This surface is for important current alarm, indicators, operation indicator and instruments. The recessed built-in armrests are in the height adjustment. Seat: Comfortable spring mounted seat KFS 9, with an oilhydraulic vibration absorption system, weight adjustment and air-permeable artificial leather or textil material. Adjusting possibilities: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Cross-member: Steel section, top of which can be raised to lay cabling. The seat can be tilted backwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 180 right, 90 left, stopped by friction brake. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 9011 black. All non-painted metal parts are electrogalvanized and chromed.
Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection
Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Weight kg 90
Part No.
Type KST 9
Price EURO
Headrest for drivers seat KFS 9 additional variations for drivers seat KFS 9 look catalog 2/140 Drivers seat KFS 10 look catalog 2/142 Monitor mounting support left or right T 478 Footrest mounted onto swivel base adjustable 15 mm 10 8
KFS 10
Plate for horizontal manual adjustment of control unit adjustable 250 mm Manual adjustment of control unit vertical (gas loaded spring) adjustable 80 mm
95 25
Motorized adjustment of control unit swivelling (drive 24 V DC, seat height + 30 mm) Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
KL KL
95
Industrial controllers
2/091
2005
X 500 32
28 x4=
weight loaded
1012 32
90
180
20,5
7,5
90
90
1 3 2 left box
Direction of view
5 4 7 6 right box Seat 8
View X
66 0
14
600 763
300
96
Industrial controllers
2/102
2005
The swivelling crane control unit KST 15 is ergonomically designed and provides a high degree of comfort. The standard design includes following: Equipment boxes: Sheet steel. The top panel of the equipment box with the devices can be raised and locked in position. The terminal strip is easily accessible via an opening on the inside that can be closed with a lockable cover. The external wiring is run through aduct from the equipment boxes in the cross-member. Seat: Comfortable spring mounted seat KFS 10, with a pneumatic vibration absorption system by compressor 24 V DC, weight adjustment and airpermeable artificial leather or textil material. Manual adjustments: Seat horizontally and vertically. lnclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Motorized adjustments: Seat with equipment boxes vertical (inclinations adjustments forward/backward). Seat with equipment boxes horizontal. Selector switches for motorized-drives are in the equipment box. Motor 24 V DC ca. 15 ampere. Cross-member: Steel section, top of which can be raised to lay cabling. The seat with the boxes can be tilted forwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 180 right, 90 left, stopped by friction brake. Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050 Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey. All non-painted metal parts are electrogalvanized and chromed. Description data look catalog 5/003/004
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 30 31 32 33 40 41 42 Crane control unit standard design Crane control unit standard design Crane control unit standard design Crane control unit standard design Equipment boxes 200 x 580 mm Equipment boxes 270 x 580 mm Equipment boxes 320 x 580 mm Equipment boxes special dimensions
Part No.
Price EURO
Headrest for drivers seat KFS 10 additional variations for drivers seat KFS 10 look catalog 2/142 Drivers seat KFS 9 look catalog 2/140 Monitor mounting support left or right Footrest mounted onto swivel base adjustable 15 mm 10 8
KFS 9
Plate for horizontal manual adjustment of control unit adjustable 250 mm Motorized adjustment of equipment boxes vertical adjustable 25 mm 24 V DC Motorized adjustment of equipment boxes horizontal adjustable 40 mm 24 V DC Motorized adjustment of control unit swivelling (drive 24 V DC, seat height + 30 mm) Heating 2 x 2 kW with ventilator 230 V 50 Hz airvolume ca. 300 m3/h mounted on the swivel base sidewise Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360
95
18
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
KL KL
97
2/103
2005
Protection IP 54
X weight loaded Dimension Dimension A B 200 270 320 1000 1140 1240 1320 60 720 50 790
ss eple
740 50
st 90
82
260
75
20 160 Motorized horizontal adjustment of seat with equipment boxes 90 90 Manual horizontal adjustment of seat Motorized horizontal adjustment of equipment boxes
40 40
Direction of view
View X 60 80 25 25 Motorized 25 vertical adjustment of seat 25 with equipment boxes (inclinations adjustments forward/ backward) + 170 350 60 580 240 570 300 80 80 Horizontal adjustment seat with suspension system 240 Vertical adjustment of seat +60 manual -80 pneumatic Motorized vertical adjustment of equipment boxes
left box right box
Seat
15 15
95
Floor mounting
98
Industrial controllers
2/108
2005
The swivelling crane control unit KST 18 is ergonomically designed and provides a high grade of comfort. The standard design includes following: Equipment boxes: Sheet steel. The top panel of the equipment box with the devices can be raised and locked in position. Cabling is run through aduct from the equipment boxes in the cross-member. (Terminal block). Seat: Comfortable spring mounted seat KFS 9, with an oilhydraulic vibration absorption system, weight adjustment and airpermeable artificial leather or textil material. Manual adjustments: Seat horizontally and vertically. Inclination of cushion, backrest and armrest also adjustable. Weight setting for optimum spring suspension. Equipment boxes horizontally and vertically. Motorized adjustments: Seat with equipment boxes vertical (inclinations adjustments forward/backward). Seat with equipment boxes horizontal. Selector switches for motorized-drives are in the equipment box. Motor 24 V DC ca. 15 ampere. Cross-member: Steel section, top of which can be raised to lay cabling. The seat with the boxes can be tilted forwards so that the cable duct in the cross-member is accessible. Swivel base: Zero-end-float spring-loaded bearing. Rotational movement 180 right, 90 left, stopped by friction brake. Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050 Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey. All non-painted metal parts are electrogalvanized and chromed. Description data look catalog 5/003/004
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 30 31 32 33 40 41 42 Crane control unit standard design Crane control unit standard design Equipment boxes 160 x 420 mm Equipment boxes 200 x 420 mm
Part No.
Price EURO
KST 18x
Headrest for drivers seat KFS 9 additional variations for drivers seat KFS 9
95
Motorized adjustment of control unit swivelling (drive 24 V DC, seat height + 30 mm) Heating 2 x 2 kW with ventilator 230 V 50 Hz airvolume ca. 300 m3/h mounted on the swivel base sidewise Multi-axis controller Single-axis controller Double-handle controller Control-switch Command and indicating devices look catalog 1/100 look catalog 1/200 look catalog 1/160 look catalog 1/220 look catalog 1/360
16
Terminal block 4 mm2 without wiring each terminal Terminal block 4 mm2 with wiring wire 1,5 mm2 each terminal External wiring single wire highly flexible 1,5 mm2 5 metre long Additional or subtract price each metre Special painted Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
KL KL
99
Industrial controllers
2/109
2005
B A 560 A Protection IP 54
200
680 57
7x4 20,5
= 28
7,5
20 160
Motorized horizontal adjustment of seat with equipment boxes Manual horizontal adjustment of seat with equipment boxes 25 25 Manual horizontal adjustment of equipment boxes
90 90
82
90
180
420 32
3
Direction of view
1 4 2 left box 7 6 right box 5 8
10 View X 32 Motorized vertical adjustment 25 of seat with equipment boxes (inclinations adjustments forward/ 25 backward) 5
Seat
Manual inclination adjustment of equipment boxes 14 15 Manual vertical adjustment of footrest 15 + 235 306 - 95 685 25 Floor mounting Cable inlet 100
300
100
240
95
Industrial controllers
2/130
2005
The crane drivers seat KFS 2 has stepless high adjustment by means of a gas-loaded spring. The backrest can be tilted, forwards onto the cushion, which in turn can then be tilted 90 sideways. All these functions are performed easily via levers. The metal parts are protected against corrosion and painted black.
Technical details: Horizontal adjustment Backrest adjustment, fine control inclination backwards Height adjustment 100 mm
max. 10 120 mm
Floor mounting
Pos. 1 2 3 4 5 6 7 8 9 10 Drivers seat with air-permeable artificial leather cover black Drivers seat with textil cover grey / black
Weight kg 15 14
Part No.
Price EURO
101
Industrial controllers
2/132
2005
The crane drivers seat KFS 4 has stepless high adjustment by means of a gas-loaded spring and an oilhydraulic vibration absorption system with weight adjustment. The backrest can be tilted, forwards onto the cushion, which in turn can then be tilted 90 sideways. All these functions are performed easily via levers. The metal parts are protected against corrosion and painted black.
Technical details: Suspension stoke Weight adjustment Horizontal adjustment Backrest adjustment, fine control inclination backwards Height adjustment 80 mm 50-130 kg 150 mm
max. 20 100 mm
Floor mounting Pos. 1 2 3 4 5 6 7 8 9 10 Armrest fully adjustable (2 pieces) 50 mm wide Armrest fully adjustable (2 pieces) 100 mm wide Drivers seat with air-permeable artificial leather cover black Drivers seat with textil cover grey / black Weight kg 24 24 Part No. Type KFS 41 KFS 42 Price EURO
102
Industrial controllers
2/134
2005
The crane drivers seat KFS 6 is ergonomically designed and provides a high grade of comfort. The drivers seat is a low level mechanical suspension seat with an oilhydraulic vibration absorption system with weight adjustment. All adjustment controls are positioned ergonomically within easy access. For this comfort drivers seat KFS 6 a lot of efficient accessories are available look Pos. 5-25. The metal parts are protected against corrosion and painted black.
Technical detail: Suspension stoke Weight adjustment Horizontal adjustment Backrest adjustment, fine control inclination backwards Height and slope adjustment 95 mm 40-130 kg 180 mm
28 (90) 65 mm
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Drivers seat standard design with air-permeable artificial leather cover black Drivers seat standard design with textil cover grey / yellow
Weight kg 25 25
Part No.
Price EURO
Headrest raint Armrest fully adjustable (2 pieces) 50 mm wide Armrest fully adjustable (2 pieces) 100 mm wide Backrest high + 100 mm inclination backwards max. 90 Backrest standard with lumbar support manual adjustment Seat cushion deep adjustment mechnical 60 mm Seat contact 1 NO 1,5 A 24 V DC Seat cushion and backrest standard with heating element 24 V DC 42 Watt Safety belt 2 point fixing Safety belt 4 point fixing (trouser braces belt)
Console
10
103
Industrial controllers
2/135
2005
Horizontal adjustment
Backrest high
104
weight loaded
weight loaded
s les ep st
Industrial controllers
2/136
2005
The crane drivers seat KFS 7 is ergonomically designed and provides a high grade of comfort. The drivers seat is a low level mechanical suspension seat with an oilhydraulic vibration absorption system with weight adjustment. All adjustment controls are positioned ergonomically within easy access. For this comfort drivers seat KFS 7 a lot of efficient accessories are available look Pos. 5-25. The metal parts are protected against corrosion and painted black.
Technical detail: Suspension stoke Weight adjustment Horizontal adjustment Backrest adjustment, fine control inclination backwards Height and slope adjustment 60 mm 40-130 kg 180 mm, dual 300 mm
28 (90) 65 mm
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Drivers seat standard design with air-permeable artificial leather cover black Drivers seat standard design with textil cover grey / yellow
Weight kg 25 25
Part No.
Price EURO
Headrest raint Armrest fully adjustable (2 pieces) 50 mm wide Armrest fully adjustable (2 pieces) 100 mm wide Backrest high + 100 mm inclination backwards max. 90 Backrest standard with lumbar support manual adjustment Seat cushion deep adjustment mechnical 60 mm Seat cushion V-cut (free sight to down) Seat contact 1 NO 1,5 A 24 V DC Seat cushion and backrest standard with heating element 24 V DC 42 Watt Safety belt 2 point fixing Safety belt 4 point fixing (trouser braces belt) Horizontal adjustment dual 180 + 120 mm (total 300 mm)
Console
10
105
Industrial controllers
2/137
2005
Horizontal adjustment
V-cut
Armrest 100 mm wide
106
Backrest high
weight loaded
s les ep st
Industrial controllers
2/138
2005
The crane drivers seat KFS 8 is a static seat with ergonomically designed and provides a high grade of comfort. The drivers seat KFS 8 is equipped with roller-bearing swivel system. All adjustment controls are positioned ergonomically within easy access. For this comfort drivers seat KFS 8 a lot of efficient accessories are available look Pos. 5-25. The console are available to build in the heating 2-steps 2 x 2 kW 380 V AC, ventilator 380 V AC, airvolume ca. 1000 m3/h, air circulation (opening in the underside of the console), selector switch for heating / ventilator. The metal parts are protected against corrosion and painted black.
Technical detail: Horizontal adjustment Backrest adjustment, fine control inclination backwards Height and slope adjustment 150 mm
28 65 mm
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Drivers seat standard design with air-permeable artificial leather cover black Drivers seat standard design with textil cover grey / black
Weight kg 25 25
Part No.
Price EURO
Headrest raint Armrest fully adjustable (2 pieces) 50 mm wide Armrest fully adjustable (2 pieces) 100 mm wide Backrest high + 100 mm inclination backwards max. 90 Backrest with lumbar support manual adjustment Seat cushion deep adjustment mechnical 60 mm
Seat cushion and backrest standard with heating element 24 V DC 42 Watt Safety belt 2 point fixing Safety belt 4 point fixing (trouser braces belt)
Roller-bearing swivel system for seat (included in Pos. 1, 2) Console Heating 2 steps 2 x 2 kW 380 V AC with ventilator 380 V AC airvolume ca. 1000 m3/h with selector switch for heating / ventilator mounting into the console
10 10
107
Industrial controllers
2/139
2005
Horizontal adjustment
Floor mounting
Middlepoint seat
108
565 33
1080 33
Industrial controllers
2/140
2005
The crane drivers seat KFS 9 is ergonomically designed and provides a high grade of comfort. The drivers seat is a low level mechanical suspension seat with an oilhydraulic vibration absorption system with weight adjustment. All adjustment controls are positioned ergonomically within easy access. For this comfort drivers seat KFS 9 a lot of efficient accessories are available look Pos. 5-25. The metal parts are protected against corrosion and painted black.
Technical detail: Suspension stoke Weight adjustment Horizontal adjustment Backrest adjustment stepless inclination backwards Height and slope adjustment 80 mm 50120 kg 160 mm 90 60 mm
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Drivers seat standard design with air-permeable artificial leather cover black Drivers seat standard design with textil cover grey / black
Weight kg 25 25
Part No.
Price EURO
Headrest raint Armrest adjustable (2 pieces) 50 mm wide Armrest adjustable (2 pieces) 100 mm wide Backrest with lumbar support manual adjustment 2 movement Backrest with lumbar support manual adjustment 4 movement Seat cushion deep prolongation + 35 mm Seat cushion V-cut (free sight to down) (Pos. 19 required) Seat contact 1 NO 1,5 A 24 V DC Seat cushion and backrest standard with heating element 24 V DC 47 Watt Safety belt 2 point fixing Safety belt 4 point fixing (trouser braces belt) Horizontal adjustment dual 160 + 120 mm (total 280 mm seat height + 30 mm) Pneumatic vibration absorption system with weight adjustment by compressor 24 V DC 8 Ampere
10
109
Industrial controllers
2/141
2005
660 600
90 ste ple ss
580 490
Horizontal adjustment 80 80
600
10,5
380 420
420 460
165
200 520
110
200
300 30
weight loaded
1100 30
Industrial controllers
2/142
2005
The crane drivers seat KFS 10 is ergonomically designed and provides a high grade of comfort. The drivers seat is a low level mechanical suspension seat with a pneumatic vibration absorption system with weight adjustment by compressor 24 V DC 8 Ampere. All adjustment controls are positioned ergonomically within easy access. For this comfort drivers seat KFS 10 a lot of efficient accessories are available look Pos. 5-25. The metal parts are protected against corrosion and painted black.
Technical detail: Suspension stoke pneumatic Weight adjustment Horizontal adjustment seat with suspension system Horizontal adjustment seat with backrest Horizontal adjustment only seat cushion Backrest adjustment stepless inclination backwards Height and slope adjustment mechanical 80 mm 50130 kg 160 mm 260 mm 150 mm
90 60 mm
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Drivers seat standard design with air-permeable artificial leather cover black Drivers seat standard design with textil cover grey / black
Weight kg 25 25
Part No.
Price EURO
Headrest raint Armrest adjustable (2 pieces) 50 mm wide Armrest adjustable (2 pieces) 100 mm wide Backrest with lumbar support manual adjustment 2 movement Backrest with lumbar support manual adjustment 4 movement Seat cushion V-cut (free sight to down included in Pos. 1, 2) Seat contact 1 NO 1,5 A 24 V DC Seat cushion and backrest standard with heating element 24 V DC 47 Watt Safety belt 2 point fixing Safety belt 4 point fixing (trouser braces belt)
Console
10
111
Industrial controllers
2/143
2005
640-160 580-160 75
90 s te p
580
less
490
70
10,5
380 420 80 80 Horizontal adjustment seat with suspension system 240 260 570 150 Horizontal adjustment only seat cushion 165 Horizontal adjustment seat with backrest
420 460
200 520
112
200
300
1100
+60
weight loaded
+ 60 80
600
Industrial controllers
2/150
2005
The portable control unit TS 1 accommodates all the devices necessary for control and monitoring. The chest panel and straps enable the operator to carry it without becoming tired. An adjustable carrying strap can also be fitted for use without the chest plate.
The control console is made of polyester (glass fibre reinforced plastic). Colour RAL 7032 pepple-grey. It can also be supplied as RAL 1018 yellow.
Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection
Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 control unit IP 65 with multi-axis controller IP 54 to IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 31 32 33 34 40 41 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Terminal block 2,5 mm2 without wiring each terminal Terminal block 2,5 mm with wiring wire 1,5 mm each terminal
2 2
Weight gramm Control unit with chest plate and straps Control unit with straps 3300 3000
Part No.
Type TS 1 TS 11
Price EURO
Plastic housing with surface resistance of less than < 109 Ohm/cm Legs for control unit alu-tube 2 pieces Legs for control unit stainless steel-tube V2 A 2 pieces Reeling hooks for control unit stainless steel V2 A Cable entry M 32 for cable 11-21 mm or M 40 for cable 19-28 mm 320 600 1200 80
Control-switch Command and indicating devices Plug in socket Connector Plug in socket Connector Plug in socket Connector Cable Oelflex Cable Oelflex Cable Oelflex Cable Neoflex Cable Neolflex Cable Neoflex 16-pole male insert 16-pole female insert 24-pole male insert 24-pole female insert 32-pole male insert 32-pole female insert 18 x 1 mm
2
look catalog 1/220 look catalog 1/360 HAN 16 E without wiring HAN 16 E without wiring HAN 24 E without wiring HAN 24 E without wiring HAN 32 A without wiring HAN 32 A without wiring -5 C to +80 C -5 C to +80 C -5 C to +80 C -30 C to +80 C -30 C to +80 C -30 C to +80 C each metre each metre each metre each metre each metre each metre 200 250 320 340 380 400 320 450 600 470 650 910
25 x 1 mm2 34 x 1 mm
2
18 x 1 mm2 24 x 1 mm
2
36 x 1 mm2
KL KL
113
Industrial controllers
2/151
2005
Direction of view
114
Industrial controllers
2/152
2005
The control console is made of polyester (glass fibre reinforced plastic). Colour RAL 7032 pepple-grey. It can also be supplied as RAL 1018 yellow.
Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection
Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 control unit IP 65 with multi-axis controller IP 54 to IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 31 32 33 34 40 41 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters Terminal block 2,5 mm2 without wiring each terminal Terminal block 2,5 mm with wiring wire 1,5 mm each terminal
2 2
Weight gramm Control unit with chest plate and straps Control unit with straps Control unit with bracket and straps Plastic housing with surface resistance of less than < 10 Ohm/cm
9
Part No.
Type TS 2 TS 21 TS 22
Price EURO
Legs for control unit alu-tube 2 pieces Legs for control unit stainless steel-tube V2 A 2 pieces Reeling hooks for control unit stainless steel V2 A Cable entry M 32 for cable 11-21 mm or M 40 for cable 19-28 mm Cable entry 180 swivelling M 32 for cable 11-21 mm or M 40 for cable 19-28 mm Multi-axis controller Single-axis controller look catalog 1/100 look catalog 1/200
Control-switch Command and indicating devices Plug in socket Connector Plug in socket Connector Plug in socket Connector Cable Oelflex Cable Oelflex Cable Oelflex Cable Neoflex Cable Neolflex Cable Neoflex 16-pole male insert 16-pole female insert 24-pole male insert 24-pole female insert 32-pole male insert 32-pole female insert 18 x 1 mm2 25 x 1 mm 34 x 1 mm
2
look catalog 1/220 look catalog 1/360 HAN 16 E without wiring HAN 16 E without wiring HAN 24 E without wiring HAN 24 E without wiring HAN 32 E without wiring HAN 32 E without wiring -5 C to +80 C -5 C to +80 C -5 C to +80 C -30 C to +80 C -30 C to +80 C -30 C to +80 C each metre each metre each metre each metre each metre each metre 200 250 320 340 380 400 320 450 600 470 650 910
18 x 1 mm2 24 x 1 mm
2
36 x 1 mm2
KL KL
115
Industrial controllers
2/153
2005
130
114
120
Cable entry
1 5 4 7 2 6 8
With bracket and cable entry swivelling Protection IP 65 with multi-axis controllers IP 54 212 464
Cable entry 180 swivelling with anti-kink protection and stain relief or connectors
116
114
120
130
114
120
220
250
Industrial controllers
2/160
2005
The control pedestal U 22/32 accomodates the devices necessary for control and monitoring. Ready wired, it can be quickly and easily installed on the sea deck. The housing (pedestal head) is made of seawater-resistant aluminium. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Surface treatment: Anti-corrosion primer, top coat: two coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey All non-painted metal parts are electrogalvanized and chromed. All mechanical operating parts are made of non-rusting materials. Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 66 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 10 11 12 13 14 15 20 21 22 23 24 25 26 27 28 29 35 36 37 38 39 40 45 46 47 48 49 50 Housing U 22 / 32 with 1 narrow side-plate with pillar-gasket Side-plate narrow gasket Side-plate wide with gasket (required for command and indicating devices Pos. 22-26) Hinged side-plate with gasket that can be locked in position (cover for command and indicating devices) Monitoring devices cover with gasket for max. 2 monitors 72 x 72 mm or 4 monitors 72 x 36 mm and max. 6 indicating devices Pos. 28, 29 Pillar 108 mm 670 mm height with flange quadratic or round Masterswitch with 6 contacts, with spring return in 0-position with ball handle and indicating labels drive Control-switches with 4 contacts with knob and indicating label Additional or subtract price each 2 contacts more variants look catalog 1/220 Wire-wound potentiometer T 130 with centre tap linear life 107 switching cycles resistance 2 x 0,5 / 1 / 2 / 5 / 10 kOhm 1,5 Watt wiper current max. 10 mA more potentiometer look catalog 1/240... Heating Mushroom head push button latching Mushroom head push button Push button Selector switch Indicator light Indicator light Contact block additional Indicator light Indicator light Power monitoring Power monitoring Ampere monitoring Ampere monitoring Monitoring illuminated Another electrical value are available 20 Watt 220 or 110 V / 50/60 Hz 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label with transformer 22 with indicating label 10 with indicating label PQ 72 PQ 72 x 36 EQ 72 EQ 72 x 36 1 mA DC 1 mA DC 100 / 200 / 1 A 100 / 200 / 1 A 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 24 Volt 220 / 24 Volt AC 1 NO + 1 NC 24 Volt diode 24 Volt
Engraved your instructions Engraved your instructions Engraved your instructions Engraved your instructions
Part No.
Price EURO
0,07
0,15 0,10 0,10 0,10 0,10 0,10 0,10 0,05 0,03 0,20 0,30 0,20 0,30
H PV P D W L L L L PQ PQ EQ EQ
Terminal block 2,5 mm2 without wiring Terminal block 2,5 mm2 with wiring wire 0,75 mm2
117
Industrial controllers
2/161
2005
Reed 108 x 4
View A - B
118
Industrial controllers
2/162
2005
The control pedestal U 23/23 accomodates the devices necessary for control and monitoring. Ready wired, it can be quickly and easily installed on the sea deck. The housing (pedestal head) is made of seawater-resistant aluminium. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Surface treatment: Anti-corrosion primer, top coat: two coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey All non-painted metal parts are electrogalvanized and chromed. All mechanical operating parts are made of non-rusting materials. Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 66 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 10 11 12 13 14 15 20 21 22 23 24 25 26 27 28 29 35 36 37 38 39 40 45 46 47 48 49 50 Housing U 23 / 23 with 1 narrow cover with pillar-gasket Housing U 23 / 23 with 1 narrow cover without thrilling in the housing
Part No.
Price EURO
Monitoring devices cover with gasket for max. 2 monitors 72 x 72 mm or 1 monitors 72 x 72 mm and max. 6 indicating devices Pos. 28, 29 Pillar 108 mm 670 mm height with flange quadratic or round Masterswitch with 6 contacts, with spring return in 0-position, with ball handle and indicating labels drive Control switches with 4 contacts with knob and indicating label Additional or subtract price each 2 contacts more variants look catalog 1/220 Wire-wound potentiometer T 130 with centre tap linear life 107 switching cycles resistance 2 x 0,5 / 1 / 2 / 5 / 10 kOhm 1,5 Watt wiper current max. 10 mA more potentiometer look catalog 1/240... Heating Mushroom head push button latching Mushroom head push button Push button Selector switch Indicator light Indicator light Contact block additional Indicator light Indicator light Power monitoring Ampere monitoring Monitoring illuminated Another electrical value available Terminal block 2,5 mm2 without wiring Terminal block 2,5 mm2 with wiring wire 0,75 mm2 20 Watt 220 V or 110 V / 50/60 Hz 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label with transformer 22 with indicating label 10 with indicating label PQ 72 EQ 72 1 mA DC 100 / 200 / 1 A 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 24 Volt 220 / 24 Volt AC 1 NO + 1 NC 24 Volt diode 24 Volt
Engraved your instructions
IA RS N61-03Z-HG N62-02-KN 01 P
0,07
0,15 0,10 0,10 0,10 0,10 0,10 0,10 0,05 0,03 0,20 0,20
H PV P D W L L L L PQ EQ
119
Industrial controllers
2/163
2005
Reed 108 x 4
View A - B 9, mounting at the top M 12, 20 deep (Helicoil) mounting at the bottom View C Gasket
120
Industrial controllers
2/164
2005
The control pedestal U 25/32 accomodates the devices necessary for control and monitoring. Ready wired, it can be quickly and easily installed on the sea deck. The housing (pedestal head) is made of seawater-resistant aluminium. Contact complement 2 A 250 V AC 15 res. 1 A 24 V DC 13 (standard) or 4 A 250 V AC 15 (special) Surface treatment: Anti-corrosion primer, top coat: two coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey All non-painted metal parts are electrogalvanized and chromed. All mechanical operating parts are made of non-rusting materials. Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation Storage -40 C to +60 C -50 C to +80 C
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 66 IEC 529 DIN 40050
Weight kg 6,80
Part No.
Type U25/32
Price EURO
Monitoring devices cover with gasket for max. 2 monitors 72 x 72 mm or 4 monitors 72 x 36 mm and max. 6 indicating devices Pos. 28, 29 Pillar 108 mm 670 mm height with flange quadratic or round Masterswitch with 6 contacts, with spring return in 0-position with ball handle and indicating labels drive Control-switches with 4 contacts with knob and indicating label Additional or subtract price each 2 contacts more variants look catalog 1/220 Conductive-plastic potentiometer T with centre tap linear life 107 switching cycles resistance 2 x 1 / 5 / 10 kOhm 0,5 Watt wiper current max. 1 mA more potentiometer look catalog 1/240... Heating Mushroom head push button latching Mushroom head push button Push button Selector switch Indicator light Indicator light Contact block additional Indicator light Indicator light Power monitoring Power monitoring Ampere monitoring Ampere monitoring Monitoring illuminated Another electrical value are available 20 Watt 220 or 110 V / 50/60 Hz 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label 30 with indicating label with transformer 22 with indicating label 10 with indicating label PQ 72 PQ 72 x 36 EQ 72 EQ 72 x 36 1 mA DC 1 mA DC 100 / 200 / 1 A 100 / 200 / 1 A 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 1 NO + 1 NC 24 Volt 220 / 24 Volt AC 1 NO + 1 NC 24 Volt diode 24 Volt
Engraved your instructions Engraved your instructions Engraved your instructions Engraved your instructions
IA RS N61-03Z-HG N62-02-KN 01 P
0,07
0,15 0,10 0,10 0,10 0,10 0,10 0,10 0,05 0,03 0,20 0,30 0,20 0,30
H PV P D W L L L L PQ PQ EQ EQ
Terminal block 2,5 mm2 without wiring Terminal block 2,5 mm2 with wiring wire 0,75 mm2
121
Industrial controllers
2/165
2005
Reed 108 x 4
122
Industrial controllers
2/170
2005
or or or or or
The multi-axis controller V 11 with 2 x 6 contacts to take away the mounting positions of 6 command or indicating devices. The multi-axis controller V 62 with 2 x 6 contacts to take away the mounting positions of 8 command or indicating devices. Surface treatment: Anti-corrosion primer, top coat: 2 coats of epoxy-resin paint, standard colour RAL 7032 pepple-grey. Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Pedant control unit Pedant control unit Pedant control unit Pedant control unit Pedant control unit 150 x 400 x 105 mm 150 x 500 x 105 mm 150 x 600 x 105 mm 260 x 500 x 105 mm 260 x 600 x 105 mm
Part No.
Type HT 11 HT 12 HT 13 HT 21 HT 22
Price EURO
Cable entry M 32 with anti-kink protection and strain relief Cable entry M 40 with anti-kink protection and strain relief Cable entry M 50 with anti-kink protection and strain relief
Multi-axis controller V 6 or V 11 look catalog 1/100 1/110 Control-switch look catalog 1/220 Command and indicating devices look catalog 1/360
Terminal block 2,5 mm2 without wiring Terminal block 2,5 mm2 with wiring wire 1,5 mm2
KL KL
Eloxal aluminium front plate silvery for HT 1 Eloxal aluminium front plate silvery for HT 2 Indicating labels not engraved with 2 or 4 arrows Engraved each 10 characters
0,40 0,70
123
Industrial controllers
2/171
2005
HT 1 Protection IP 54
HT 2 Protection IP 54
124
Industrial controllers
Pedal-controller P 7 / PP 7
The pedal-controller P 7 and PP 7 is a rugged switching devices to IEC 947-5-1 EN 60 947 DIN VDE 0660-200, for footing applications. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Surface treatment
3/100
2005
Primer, top coat: 2 coats of epoxyresin paint, standard colour RAL 7032 pebble-grey P7 PP 7 6 million operating cycles 10 million operating cycles Operation -40 C to +60 C Storage -50 C to +80 C
Mechanical life
Climate resistance Damp heat constant Damp heat cyclic Degree of protection
P7 PP 7
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050 IP 65 IEC 529 DIN 40050
mounting outside 4 x M8
Cable entry
P 7- 1
P-X
Pos. 1 2 3 4 5 6 7 8 9 10 11 Potentiometer e.t.c. with mounted 12 13 14 15 Wire-wound potentiometer T 129 linear life 5 x 107 switching cycles resistance 1/2/4/10 kOhm 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angel 300 More potentiometer e.t.c. look catalog 1/240... No. of contacts (microswitch) max. 6 pcs. Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement Switching sequence max. 0-4 or max. 2-0-2 Spring return in 0-position Friction brake Pedal-controller standard version Pedal-controller heavy-duty version
Part No.
Type P7 PP 7
Price EURO
150 100 50 Z R
30 40 50
1 2 3
70
P (P)
125
Industrial controllers
Pedal-controller P 8 / PP 8
The pedal-controller P 8 and PP 8 is a rugged switching devices to IEC 947-5-1 EN 60 947 DIN VDE 0660-200, for footing applications. Contact complement 2 A 250 V AC 15 res. 3 A 24 V DC 13 Surface treatment:
3/101
2005
Primer, top coat: 2 coats of epoxyresin paint, standard colour RAL 7032 pebble-grey P8 PP 8 6 million (operating cycles) 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C
Mechanical life
Climate resistance Damp heat constant Damp heat cyclic Degree of protection
P8 PP 8
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050 IP 65 IEC 529 DIN 40050
9mounting outside 4 x M8
Cable entry
P8- 1
P-X
Weight gramm Pedal-controller standard version Pedal-controller heavy-duty version 2500 2600
Part No.
Type P8 PP 8
Price EURO
Switching sequence max. 0-4 Spring return in 0-position Friction brake adjustable
150 100 50 Z R
No. of contacts (microswitch) max. 6 pcs. Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
30 40 50
1 2 3
Wire-wound potentiometer T 129 linear life 5 x 107 switching cycles resistance 1/2/4/10 kOhm 1,5 Watt wiper current max. 10 mA Prepared for mounting potentiometer shaft 6 mm adjusting-angle 300 More potentiometer e.t.c. look catalog 1/240...
70
P (P)
Industrial controllers
Pedal-controller P 10 / P 11
The pedal-controller P 10 / P 11 is a rugged switching device to IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications. The modular design enables the switching device to be used universally. The P 10 / P 11 is resistant to oil, maritime climate, ozone and UV radiation.
3/102
2005
Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Mechanical life Permissible ambient temperature 8 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C
Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
View at the top Hole pattern Example for type-sign Cover housing 3 x cable entry or connector Pedal-controller No. of contacts Weight gramm Pedal-controller standard version Pedal-controller centre position notching max. 1-0-1 Switching sequence max. 0-3 Spring return in 0-position Friction brake adjustable No. of contacts (microswitch) max. 3 pcs. Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement Potentiometer e.t.c. with mounted Conductive-plastic potentiometer T 362 linear with centre tap life 107 switching cycles Resistance 2 x 5 kOhm 0,5 Watt wiper current max. 1 mA Prepared for mounting potentiometershaft 6 mm adjusting angle 120 More potentiometer e.t.c. look catalog 1/240... Impedance converter Input 15 Volt, output 10 Volt / 5 mA Cover housing Filter plug M 20 for air-condition Cable entry M 20 Plug in socket 14-pole female insert CPC 17 unwired Connector 14-pole male insert CPC 17 unwired Wiring plug in socket or connector each wired-connection Electronic (Amplifier, Profi-Bus, CAN-Bus) look catalog 3/510/ 300 20 30 150 150 1300 1300 30 30 20 40 60 70 B P 10- 1 Z P-X Special please to describe Potentiometer e.t.c. Spring return Part No. Price EURO
Pos. 1 2 3 4 5 6 7 8 9 10
Type P 10 P 11 Z R 1 2 3 P
11 12 13 14 15 16 17 18 19 20
(P) I B
127
Industrial controllers
Pedal-controller P 12
The pedal-controller P 12 is a rugged switching device to IEC 947-5-1 EN 60947 DIN VDE 0660-200 for electro-hydraulic applications. The modular design enables the switching device to be used universally. The P 12 is resistant to oil, maritime climate, ozone and UV radiation.
3/103
2005
Contact complement 0,5 A 110 V AC 15 res. 1,5 A 24 V DC 13 I min > 0,2 mA 2 V DC 12 Gold plated for max. load of 0,12 Watt (standard) or I max < 300 mA 0,4 V DC 12 max. capacity 0,12 Watt do not exceed! I min >0,2 mA 2 V DC 12 max. contact reliability for very low current (special) Mechanical life Permissible ambient temperature 8 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C
Climate resistance Damp heat constant Damp heat cyclic Degree of protection front Technical data look catalog 5/100
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
View at the top Hole pattern Example for type-sign Cover housing 3 x cable entry or connector Pedal-controller No. of contacts B P 12 - 1 Z P-X Special please to describe Potentiometer e.t.c. Spring return
Part No.
Type P 12
Price EURO
Switching sequence max. 0-3 Spring return in 0-position Friction brake adjustable
30 30
Z R
No. of contacts (microswitch) max. 3 pcs. Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement Potentiometer e.t.c. with mounted Conductive-plastic potentiometer T 362 linear life 107 switching cycles Resistance 5 kOhm 0,5 Watt wiper current max. 1 mA Prepared for mounting potentiometershaft 6 mm adjusting angle 120 More potentiometer e.t.c. look catalog 1/240... Impedance converter Input + 15 Volt, output + 10 Volt / 5 mA Cover housing Filter plug M 20 for air-condition Cable entry M 20 with anti-kink protection and strain relief Plug in socket 14-pole female insert CPC 17 unwired Connector 14-pole male insert CPC 17 unwired Wiring plug in socket or connector each wired-connection Electronic (Amplifier, Profi-Bus, CAN-Bus) look catalog 3/510/
20 40 60
1 2 3
10 11 12 13
70
P (P)
14 15 16 17 18 19 20
128
Industrial controllers
3/200
2005
The device is programmed by means of stepless adjustment of double cam disks, which can be provided from 18 to 192 contact disks according to the switching program required. The following gear ratios (n:1) are possible: 2 3 4 5 6 7 8 10 12 13 15 16 18 20 25 26 28 30 40 50 60 66 75 80 88 91 104 110 121 140 154 160 176 220. Further ratios can be provided as required. The maximum usable rotational angle at the spindle is 342.
Surface treatment
Primer, top coat: 2 coats of epoxyresin paint, standard colour RAL 7032 pebble-grey 10 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C
Climate resistance Damp heat constant Damp heat cyclic Degree of protection (in housing) Technical data look catalog 5/100, T 576
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 65 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 20 21 22 23 24 25 26 27 30 31 32 No. of contacts 2 3 Switching program with 18, 24, 30, 36, 45, 60, 75, 90, 110, 120,176 or 192 4 Contact ways program-disks 5 6 7 The program-disks are infinitely adjustable within 360. 8 9 10 11 12 13 14 15 or to your contact-arrangement 16 Gearing 2 : 1 to 20 : 1 25 : 1 to 80 : 1 88 : 1 to 121 : 1 140 : 1 to 220 : 1 or ratios to your instructions Ratios (n : 1) Limit switch without gear
Weight gramm 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 400 450 500 550 550 100
Part No.
Type 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Price EURO
Potentiometer e.t.c. with mounted Wire-wound potentiometer PW 70 d linear life 107 switching cycles Resistance 1,2,5,10 kOhm 5 Watt wiper current max. 30 mA Prepared for mounting potentiometer (gearing metal) Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Aluminium housing U 17 / 13 for max. 8 contacts Aluminium housing U 16 / 20 for max. 16 contacts Aluminium housing U 16 / 35
P (P) (P)
U U U
129
Industrial controllers
3/201
2005
U 17 / 13 U 16 / 20 and U 16 / 35
ever to gearing
Type 1 2 3 4 5 6 7 8
No. of contacts 1 2 3 4 5 6 7 8
Type 9 10 11 12 13 14 15 16
No. of contacts 9 10 11 12 13 14 15 16
Example for type-sign Aluminium housing Gear limit switch Gear ratios
UGE 1-40 8
130
Industrial controllers
3/300
2005
The copy-cam controller KVS is a rugged switching device to IEC 947-5-1 EN 60947 DIN VDE 0660-200 and is designed for packing machines. The free spindle end is intended for a gearwheel, sprocket wheel or for direct coupling to the driven machine. Gearing for matching rotational speed can be supplied (see 3/200). The work sequence of the machine is copied. The drum controller is supported in a bearing, is extremely accurate and has a long service life. The contact blocks, microswitches, proximity initiators (items 15-19) can be replaced individually or can be combined. The unit is programmed via double cam disks which can be adjusted steplessly and which have a 180 contact deck.
Surface treatment
Primer, top coat: 2 coats of epoxyresin paint, standard colour RAL 7032 pebble-grey 20 million (operating cycles) Operation -40 C to +60 C Storage -50 C to +80 C
Proximity initator Type IN 5002-FPKG plus switching Type IN 5002-FNKG minus switching Connection voltage 18-30 V DC Current loading 100 mA Current consumption, not switched 10 mA Ambient temperature, compensated -25 C/+80 C Output: contact-free, short-circuit proof an protected against polarity reversal, switching state displayed via LED
Climate resistance Damp heat constant Damp heat cyclic Degree of protection (in housing) Technical data look catalog 5/100, T 104
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54/65 IEC 529 DIN 40050
Weight kg Copy-cam controller with free shaft end 12 mm without contacts without proximity initiator No. of contacts 3 5 7 9 11 Switching program 180 each contact way 13 15 17 19 21 23 0,70 0,90 1,10 1,30 1,50 1,70 1,90 2,10 2,30 2,50 2,70
Part No.
Type 01 02 03 04 05 06 07 08 09 10 11
Price EURO
0,08
7 8 8 I F
Impulse device hall generator 15 lmp./rev via slot disk Second, free shaftend 12 mm Mounting angles 2 pieces each copy-cam controller Aluminium housing U 15 / 14 IP 54 up to type 03 Aluminium housing U 15 / 21 IP 54 up to type 06 Aluminium housing U 15 / 30 IP 54 up to type 11 Aluminium housing U 20 / 15 IP 65 up to type 03 Aluminium housing U 20 / 22 IP 65 up to type 06
W U U U U U
131
Industrial controllers
3/301
2005
U 15 / .. Protection IP 54
U 20 / .. Protection IP 65
Type 01 02 03 04 05 06 07 08 09 10 11
No. of contact 3 5 7 9 11 13 15 17 19 21 23
Dimension A 72 95 118 141 164 187 210 233 256 279 302
Dimension B 87 110 133 156 180 202 225 248 271 294 317
Screwconnection M4 M3 M3
132
Industrial controllers
3/400
2005
The DC contact block to IEC 947-5-1 EN 60947 DIN VDE 0660-200 and VDE 0670/4 20 is used for signalling and announciation applications. The snap-action mechanism prevents slow contact opening when the plunger is operated slowly. Quenching of the arc that occurs with DC is supported by two-capacity permanent magnets. These are arranged so that the polarity can be ignored when connecting +/- cabling. However, the polarity of the quenching magnets must be noted when installing the contact blocks to prevent the magnets adversely affecting each other. Contact blocks in four different colours are available for polarity identification of the magnets when fitted (see diagram below left). The contact blocks may only be installed on non-magnetizable materials with screws, etc. made of non-ferrous metal. The self-cleaning silver contacts are designed for low switching frequency, low currents and voltages. Gold coated contacts can be supplied (approx. 0,2 ), less than 42 Volt required. The screw connection M3.5 at the side is suitable for 2 conductors max. 2.5 mm2. The plug-in connection at the top 4.8 x 0.8 mm DIN 46247. Several contact blocks can be plugged on top of each other and operated jointly. The plug-type terminals are then only accessible on the top unit. The contact blocks can be provided with shock protection to DIN VDE 0106 Part 100. Please consult our technical department in the event of: application in extreme nuisance, confined switching points or increased breaking currents.
blue green
grey yellow
blue green
V V V V V
DC DC DC DC AC 15
Switching capacity NC 2A 4A 6A 10 A 6A
NO 1A 3A 6A 10 A 6A
Time constant 20 ms 20 ms 20 ms 20 ms
2 million operating cycles 50.000 operating cycles at 2 A 250 V DC L/R 20 ms Operation -40 C to +60 C Storage -50 C to +80 C DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 40 IEC 529 DIN 40050
Permissible ambient temperature Climate resistance Damp heat constant Damp heat cyclic Degree of protection
Pos. 1 DC-contact Colour code 2 DC-contact Colour code 3 4 5 6 7 8 9 normally closed (NC) grey or blue normally open (NO) yellow or green
Weight gramm 20
Part No.
Type SO 1.10
Price EURO
20
SS 1.10
Shock protection KEG 142 to DIN VDE 0106 Part 100 Roller lever Toggle lever (switching in one direction only) Plug-in connection at side 4,8 x 0,8 mm (2 pieces) Contacts gold-coated approx. 0,2 m Contact without quenching magnets (for AC only) subtract price Contact without quenching magnets (for AC only) and without snap-action mechanism subtract price 10 15 R K
133
Industrial controllers
3/401
2005
Shock protection
Contact travels 0,2 Operating force 2,2 N 20 % 1 Plunger zero position 2 Reversing point 3 Switching point
with roller lever Contact travels 0,2 Normally closed (NC) Normally open (NO)
134
Industrial controllers
Signal-cam controller NU 1
3/402
2005
The cam controller NU 1 is used as a signal and announciation switch in HV systems. This rugged switching device to IEC 947-5-1 EN 60947 DIN VDE 0660-200 and VDE 0670/4 20 has cam disks made of insulation material that can be set at 10 intervals. The switching rating of the contacts (NC with snap-action mechanism) is 6 A 250 V AC 15 or 2 A 250 V DC. Time constant L/R = 20 ms. NO contacts can also be supplied. The DC contact blocks are designed to permit series assembly, which can then be operated simultaneously. This requires additional components for mounting the contacts. Mechanical life Permissible ambient temperature 2 million operating cycles Operation -40 C to +60 C Storage -50 C to +80 C
Climate resistance Damp heat constant Damp heat cyclic Degree of protection (in housing) Technical data look catalog 5/100
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 23 24 25 30 31 32 Shock protection KEG 142 for DC-contacts to DIN VDE 0106 Part 100 Aluminium housing U 15 / 14 up to type 6 Aluminium housing U 15 / 21 up to type 12 Aluminium housing U 15 / 30 up to type 16 Second free shaftend 12 mm standard or 12 mm hexagonal Spring return in 0-position Switching sequence 4-0-4 Mounting angles 2 pieces each signal-cam controller Link lever for shaft 12 mm standard or 12 mm hexagonal Plastic-cover (Astralon) (Dust and shock protection) up to max. 4 8 12 16 or to your contact-arrangement Switching program to your contact-arrangement Components for mounting series contacts on top with (DC-contacts) Signal-cam controller with free shaftend 12 mm standard or 12 mm hexagonal Switching program No of contact 2 4 6 8 10 12 14 16 2 4 8 12 16
Weight gramm 350 460 570 680 790 900 1010 1120
Part No.
Type 2 4 6 8 10 12 14 16
Price EURO
+4 +8 +12 +16
F 110 Z
80 70
W GH A A A A
U U U
135
Industrial controllers
Signal-cam controller NU 1
3/403
2005
or 12 mm hexagonal
12 h9 standard
Mounting angles
Type 02 04 06 08 10 12 14 16
No. of contacts 2 4 6 8 10 12 14 16
each side
136
Industrial controllers
Signal-cam controller NU 2
3/404
2005
The cam controller NU 2 is used as a signal and announciation switch in HV systems. This rugged switching device to IEC 947-5-1 EN 60947 DIN VDE 0660-200 has cam disks made of insulation material that can be set at 10 intervals. The switching rating of the contacts (positively opened) is 4 A 350 V AC 15 res. 1 A 24 V DC 13. Mechanical life Permissible ambient temperature 6 million operating cycles Operation -40 C to +60 C Storage -50 C to +80 C
Climate resistance Damp heat constant Damp heat cyclic Degree of protection (in housing) Technical data look catalog 5/100
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 Second free shaftend 12 mm standard or 12 mm hexagonal 12 13 14 15 21 22 23 24 25 30 31 32 Aluminium housing U 15 / 14 up to type 6 Aluminium housing U 15 / 21 up to type 12 Aluminium housing U 15 / 30 up to type 16 Spring return in 0-position Switching sequence 4-0-4 Mounting angles 2 pieces each signal-cam controller Link lever for shaft 12 mm standard or 12 mm hexagonal Plastic-cover (Astralon) (Dust and shock protection) up to max. 4 8 12 16 or to your contact-arrangement Switching program to your contact-arrangement Signal-cam controller with free shaftend 12 mm standard or 12 mm hexagonal Switching program No. of contact 2 4 6 8 10 12 14 16 2
Weight gramm 280 380 480 580 680 780 880 980
Part No.
Type 2 4 6 8 10 12 14 16
Price EURO
110
80 70
W GH A A A A
U U U
137
Industrial controllers
Signal-cam controller NU 2
3/405
2005
Link lever
Plastic-cover
or 12 mm hexagonal
12 h9 standard
Mounting angles
Type 2 4 6 8 10 12 14 16
No. of contacts 2 4 6 8 10 12 14 16
Dimension C 75 100 125 150 177 202 227 252 each side
138
Industrial controllers
Signal-cam controller NU 3
3/406
2005
The cam controller NU 3 is used as a signal and announciation switch in HV systems. This rugged switching device to IEC 947-5-1 EN 60947 DIN VDE 0660-200 and VDE 0670/4 20 has cam disk that can be programmed. The switching rating of the contacts (positively opened and positively closed) is 8 A 250 V AC 15 res. 2,5 A 250 V DC. Time constant L/R = 20 ms. Mechanical life Permissible ambient temperature 1 million operating cycles Operation -40 C to +60 C Storage -50 C to +80 C
Climate resistance Damp heat constant Damp heat cyclic Degree of protection (in housing) Technical data look catalog 5/100
DIN IEC 68 part 2-3 DIN IEC 68 part 2-30 IP 54 IEC 529 DIN 40050
Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 21 22 23 24 25 30 31 32 Contacts with additional screw connection each Second free shaftend 12 mm standard or 12 mm hexagonal Spring return in 0-position Switching sequence 4-0-4 Mounting angles 2 pieces each signal-cam controller Link lever for shaft 12 mm standard or 12 mm hexagonal Aluminium housing U 15 / 14 up to type 6 Aluminium housing U 15 / 21 up to type 12 Aluminium housing U 15 / 30 up to type 16 Signal-cam controller with free shaftend 12 mm standard or 12 mm hexagonal Contacts with connector lugs Switching program to your contact-arrangement No. of contacts 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 2
Weight gramm 450 600 750 900 1050 1200 1350 1500 1650 1800 1950 2100 2250 2400 2550 2700
Part No.
Type 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Price EURO
F 110 Z
W GH U U U
139
Industrial controllers
Signal-cam controller NU 3
3/407
2005
Link lever
Plug in connection
Additional Contact set snapped screw connection up to 4 mm2 (cage damp) Mounting at the top
or 12 mm hexagonal
12 h9 standard
Dimension A 37 52 67 82 97 112 127 142 157 172 187 202 217 232 247 262 Dimension F 130 200 290
Dimension C 57 72 87 102 117 132 147 162 177 192 207 222 237 252 267 282 Dimension G 169 239 329
Example for type-sign Signal-cam controller No. of contacts Second free shaftend
NU 3-04- F
140
Industrial controllers
3/502
2005
Features: Stabilized voltage Chopper output stage with adjustable frequency Ramp time setting ON / OFF delay Creep speed circuit adjustable Solenoid current setting separate for minimum current and maximum current Output current controlled independently of temperature and solenoid Power output short-circuit-proof with overload protection Voltage input protected against polarity reversal Mechanical selection of direction by means of contacts Actuation of 4 proportional valves solenoid connections drawing ES / 43-10 Actuation of 2 proportional valves solenoid connections drawing ES / 43-11 LED operating voltage and working display Microprocessor technology therefore especially adaptable
Characteristics: Supply voltage Residual ripple Control voltage range Ue Ie f I min. 10 ... 20% 0 ... < 1 mA 25 ... 0 ... 250 Hz 1A 2 A at 12 Volt 1 A at 24 Volt 25 sec 25 sec 25 ... 75% 5V 32 V DC
38
2,5
4,3
I max. = I min ... I max. = I min ... t on t off 0,2 ... 0,2 ...
95
85
115 125
Pos. 1 2 3 Electronic control unit for 4 proportional valves solenoid Electronic control unit for 2 proportional valves solenoid
Part No.
Price EURO
141
Industrial controllers
3/503
2005
ES / 43-10
4 Proportional valves-solenoid
ES / 43-11
2 Proportional valves-solenoid
Supply voltage 10 . . 32 V DC 0V
Proportional valvesolenoid
142
Industrial controllers
Electronic (Amplifier) Output analog for potentiometer with attach to our switching device
Type T 640 Weight gramm 150 E01 E02 Part No. 52410...
3/510
2005 Price EURO
Pos. 10 11 12
for mounting on: V 10, V 8, VV 8, D 8, P 10, P 11, P 12 Voltage output impressed 0-10 Volt electronic for 1 axis electronic for 2 axis Technical data: Power supply 18-30 V DC Output 0-10 Volt (+ 5 mA) Output characteristic linear
Type
20 21 22
Voltage output impressed 10 Volt electronic for 1 axis electronic for 2 axis Technical data: Power supply 18-30 V DC Output 10 Volt ( 5 mA) Output characteristic linear
T 641
30 31 32
Output power impressed 0-20 mA electronic for 1 axis electronic for 2 axis Technical data: Power supply 18-30 V DC Output 0-20 mA Output characteristic linear
T 642
40 41 42
Output power impressed 4-20 mA electronic for 1 axis electronic for 2 axis Technical data: Power supply 18-30 V DC Output 4-20 mA Output characteristic linear
T 643
50 51 52
Output power impressed 20 mA electronic for 1 axis electronic for 2 axis Technical data: Power supply 18-30 V DC Output 20 mA Output characteristic linear
T 644
90
Humidity protection (circuit board moulded) for use with high condensation
143
Industrial controllers
3/520
2005 Price EURO
Pos. 1
for mounting on: V 10, V 8, VV 8, D 8, P 10, P 11, P 12 Electronic Technical data: Profi-Bus Power supply 18-30 V DC distinctively poled Profi-Bus Baud rate max. 12 MBit/s Address outside adjustable 0...99 by rotary switch (default 99) potentiometer output value 0 / 128 / 255 or 255 / 0 / 255
Type E30
Input
3 analog ports for 3 potentiometers (3-axis) 6 digital ports for 3 x 2 direction-contacts 8 digital ports for 8 switches
90
Humidity protection (circuit board moulded) for use with high condensation
144
Industrial controllers
3/530
2005 Price EURO
Pos. 1
for mounting on: V 10, V 8, VV 8, D 8, P 10, P 11, P 12 Electronic Technical data: CAN-Bus Power supply 9-36 V DC distinctively poled CAN-Bus level: physical layer acc. ISO 11898 Baud rate 125 kBit/s...1Mbit/s Bus-exclusion DIP switch hook up Identifier / CAN-open-ID adjustable by DIP switch
Type E40
Input
4 analog ports for 4 potentiometer (4-axis) 8 digital ports for 4 x 2 direction-contacts 8 digital ports for 8 switches
Connection D-SUB 9 socket protection IP 65 (male) 2 3 7 9 CAN-L in GND CAN-H in Supply voltage
Connection D-SUB 9 socket protection IP 65 (female) 2 3 7 9 CAN-L out GND CAN-H out Supply voltage
90
Humidity protection (circuit board moulded) for use with high condensation
145
Industrial controllers
Notice
146
Industrial controllers
4/100
2005
The spindle block Pos. 1-5 incorporates an internal gearing, control-handle with knob solid, bellow, frontplate and prepared for mounting the master switch.
The master switch Pos. 30-36 incorporates a cam shaft, cam disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 1-2 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 92
V 61 1
V 61.1 1 1-2 3
V 62 1 4 2 3-4 3
V 64 1 4 2 3-4
V 64.1 1
Weight gramm 960 980 900 1010 960 60 60 60 110 30 50 50 100 100 110 110 40 60
Part No. 51009... ...00002 ...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016 ...00017 ...00018 ...00019 ...00020
Price EURO
2 1-2
KHG/06 KHG/06 KBKQ ... KBKR ... KBKT ... KMFD/52 KMI/15 KHG/08 KHG/14 KHG/16 KHG/12 KHG/10 KBAD/324 KHG/20
Gate open-shaped (for open shifting) Gate cross-shaped (prohibits diagonal shifting) Gate special-shaped (for e. H-gate) Spring return in 0-position (for each direction) Friction brake adjustable (for each direction) Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 200, 160 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Master switch switching sequence 4-0-4 Direction 1-2 and 3-4 each master switch Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
Switching sequence 5-0-5 or 6-0-6 Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Front plate with 4 screws M5 x 15 (for mounting the bellow) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (2 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Contact set with 2 contacts 2 A 250 V AC 15 Contact set with 2 contacts 4 A 250 V AC 15 Microswitch (164) 2 A 250 V AC 15 with fixings and contact striker (for Pos. 22, 23, 24, 27)
...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027 ...00029 ...00030 ...00032 ...00033 ...00034 ...00035 ...00036 ...00037 ...00038 ...00039 ...00040 ...00041 ...00042 ...00043
01 02 03 04 05 06 (P) (P)
147
Industrial controllers
4/102
2005
The spindle block Pos. 1-5 incorporates an internal gearing, control-handle with knob solid, bellow, frontplate and prepared for mounting the master switch.
The master switch Pos. 30-36 incorporates a cam shaft, cam disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 1-2 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 92
148
VV 61 1
VV 61.1 1 1-2
VV 62 1 3 2 3-4 4 3
VV 64 1 4 2 3-4
VV 64.1 1
Weight gramm 960 980 900 1010 960 60 60 60 110 30 50 50 100 100 110 110 40 60
Part No. 51029... ...00002 ...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016 ...00017 ...00018 ...00019 ...00020
Price EURO
2 1-2
KHG/06 KHG/06 KBKQ ... KBKR ... KBKT ... KMFD/52 KMI/15 KHG/08 KHG/14 KHG/16 KHG/12 KHG/10 KHG/169 KHG/20
Gate open-shaped (for open shifting) Gate cross-shaped (prohibits diagonal shifting) Gate special-shaped (for e. H-gate) Spring return in 0-position (for each direction) Friction brake adjustable (for each direction) Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 200, 160 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Master switch switching sequence 4-0-4 Direction 1-2 and 3-4 each master switch Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
Switching sequence 5-0-5 or 6-0-6 Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Front plate with 4 screws M5 x 15 (for mounting the bellow) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (2 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Contact set with 2 contacts 2 A 250 V AC 15 Contact set with 2 contacts 4 A 250 V AC 15 Microswitch (164) 2 A 250 V AC 15 with fixings and contact striker (for Pos. 22, 23, 24, 27)
...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027 ...00028 ...00029 ...00030 ...00031 ...00032 ...00033 ...00034 ...00035 ...00036 ...00037 ...00038 ...00039 ...00040 ...00041
01 02 03 04 05 06 (P) (P)
Industrial controllers
4/110
2005
The spindle block Pos. 1, 3 incorporates an internal gearing, control-handle with knob solid, bellow, frontplate.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 92
V 11.1 1 3 2
V 11 1 4 2
Type V 11.1
Price EURO
KHN/26
500
...00003
V 11
Gate open-shaped Gate cross-shaped Gate special-shaped Spring return in 0-position (2 spring, 2 bolt) Friction brake adjustable
(for open shifting) (prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
KBKW ... KBKW ... KBKW ... KHN/26 KMI 4 KHN/07 KHN/09 KHN/11 KHN/15 KHN/13 KHN/49 KBAD/192
...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016 ...00017
P P Z R M T H D DV B1 B 1T
Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Front plate with 4 screws M 4 x 16 (for mounting the bellow) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (2 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Contact set with 2 contacts 2 A 250 V AC 15 Contact set with 2 contacts 4 A 250 V AC 15 Microswitch (164) 2 A 250 V AC 15 with fixings and contact striker (for Pos. 22, 23, 24, 27)
KHN/31
...00018 ...00019 ...00020 ...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027 ...00028 ...00029 ...00030 ...00031
(P) (P)
149
Industrial controllers
4/120
2005
The spindle block Pos. 1, 3 incorporates an internal gearing, control-handle with knob solid, bellow, ring nut and prepared for mounting the master switch.
The master switch Pos. 30-36 incorporates a cam shaft, cam disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91
150
V 51 1 3 2
V5 1 4 2
Type V 51
Price EURO
KHE/01
500
...00003
V5
Gate open-shaped (for open shifting) Gate cross-shaped (prohibits diagonal shifting) Gate special-shaped (for e. H-gate) Spring return in 0-position (2 fixing, 2 spring) (for each direction) Friction brake adjustable (for each direction) Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 5 with joint Control-handle with palm grip B 5 with push button top (mechanical parts) with joints Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Master switch switching sequence 3-0-3 Direction 1-2 and 3-4 each master switch (only together deliver) Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
KBKL ... KBKK ... KBKL ... KMI/11 KHE/43 KHE/34 KHE/45 KHE/46 KHE/65 KHE/276 KBAD/254 KBAD/311
50 50 50 25 30 50 50 50 50 60 60 40 60
...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016 ...00017
P P Z R M T H D DV B5 B 5T
Switching sequence 4-0-4 Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Ring nut (for mounting the bellow) Gasket (for spindle block Pos. 1, 3) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (1 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever and insulating disk (for Pos. 30-35) Microswitch (MZX1) 2 A 250 V AC 15 with fixings and contact striker (for Pos. 22, 23, 24, 27)
...00018 ...00019 ...00020 ...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027 ...00028 ...00029 ...00030 ...00031 ...00032 ...00033 ...00034 ...00035 ...00036 ...00037 ...00038
1 2 3 4 5 6 (P) (P)
KEN/05
Industrial controllers
4/122
2005
The spindle block Pos. 1, 3 incorporates an internal gearing, control-handle with knob solid, bellow, frontplate and prepared for mounting the master switch.
The master switch Pos. 30-36 incorporates a cam shaft, cam disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91
VV 51 1 3 2
VV 5 1 4 2
Type VV 51 VV 5
Price EURO
Gate open-shaped (for open shifting) Gate cross-shaped (prohibits diagonal shifting) Gate special-shaped (for e. H-gate) Spring return in 0-position (2 fixing, 2 spring) (for each direction) Friction brake adjustable (for each direction) Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Master switch switching sequence 3-0-3 Direction 1-2 and 3-4 each master switch (only together deliver) Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
KBKP ... KBKP ... KBKP ... KMI/11 KHE/147 KHE/155 KHE/149 KHE/151 KHE/153 KHE/276 KHE/161
...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016 ...00017
P P Z R M T H D DV B1 B 1T
Switching sequence 4-0-4 Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Front plate with 4 screws M 5 x 15 (for mounting the bellow) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (1 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever and insulating disk (for Pos. 30-35) Microswitch (MZX1) 2 A 250 V AC 15 with fixings and contact striker (for Pos. 22, 23, 24, 27)
...00018 ...00019 ...00020 ...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027 ...00028 ...00029 ...00030 ...00031 ...00032 ...00033 ...00034 ...00035 ...00036 ...00037
1 2 3 4 5 6 (P) (P)
KEN/05
151
Industrial controllers
4/130
2005
The spindle block Pos. 1, 3 incorporates an internal gearing, control-handle with knob solid, bellow and boot clamp.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 43 80 81 82 83 84 85 86 87 88 89 90 91
V 81 1 3 2
V8 1 4 2
Type V 81
Price EURO
KHL/01
900
...00003
V8
Gate open-shaped Gate cross-shaped Gate special-shaped Spring return in 0-position (2 spring, 2 bolt) Friction brake adjustable
(for open shifting) (prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
KBKV ... KBKV ... KBKV ... KMI/21 KHL/05 KHL/11 KHL/13 KHL/09 KHL/07 KHL/202 KHL/25 KHL/27
...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016 ...00017
P P Z R M T H D DV B1 B 1T
Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 180, 140 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Potentiometer e.t.c. look catalog 1/240... Bellows Boot clamp Gasket (for spindle block Pos. 1,3) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (1 notching lever with roll, 1 notching spring, 1 notching disk)
Microswitch (V4N-GP) 0,5 A 110 V AC 15 (for masterswitch) Microswitch (V4N-GP) 0,5 A 110 V AC 15 with contact striker (for Pos. 22, 23, 24, 27)
...00026 ...00027
152
Industrial controllers
4/132
2005
The spindle block Pos. 1, 3 incorporates an internal gearing, control-handle with knob solid, bellow and boot clamp.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 43 80 81 82 83 84 85 86 87 88 89 90 91
VV 81 1 3 2
VV 8 1 4 2
Drawing No.
Type VV 81
Price EURO
900
...00003
VV 8
Gate open-shaped Gate cross-shaped Gate special-shaped Spring return in 0-position (2 spring, 2 bolt) Friction brake adjustable
(for open shifting) (prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
KBKV ... KBKV ... KBKV ... KMI/21 KHL/05 KHL/11 KHL/13 KHL/09 KHL/07 KHL/202 KHL/72
...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016 ...00017
P P Z R M T H D DV B1 B 1T
Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 180, 140 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Potentiometer e.t.c. look catalog 1/240... Bellows Boot clamp Gasket (for spindle block Pos. 1, 3) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (1 notching lever with roll, 1 notching spring, 1 notching disk)
Microswitch (V4N-GP) 0,5 A 110 V AC 15 (for masterswitch) Microswitch (V4N-GP) 0,5 A 110 V AC 15 with contact striker (for Pos. 22, 23, 24, 27)
...00026 ...00027
153
Industrial controllers
4/140
2005
The spindle block Pos. 1, 3 incorporates an internal gearing, control-handle with knob solid, bellow and front plate.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 43 80 81 82 83 84 85 86 87 88 89 90 91
V 10.1 1 3 2
V 10 1 4 2
Type V 10.1
Price EURO
KHM/03
250
...00003
V 10
Gate open-shaped Gate cross-shaped Gate special-shaped Spring return in 0-position with sliding-pice Friction brake
(for open shifting) (prohibits diagonal shifting) (for e. H-gate) (including spindle block) (for each direction)
KBKT ... KBKT ... KBKT ... KHM/22 KBAD/141 KBAD/145 KBAD/143
20 20 20
P P Z R M T
Control-handle with knop solid, joint and chassis cast Control-handle with latch for mechanical zero interlock, joint and chassis cast Control-handle with dead mans button (mechanical parts), joint and chassis cast
50 50 80
Control-handle with palm grip B 5, joint and chassis cast Control-handle with palm grip B 5 with push button top 1 NO, cable, joint and chassis cast More knobs, grips and T-grips with and without signal devices look catalog 1/228... Potentiometer e.t.c. look catalog 1/240... Bellows Front plate with 4 screws M 4 x 20 (for mounting the bellow) Gasket (for spindle block Pos. 1, 3) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21) Notching (1 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Microswitch (V4N-GP) 0,5 A 110 V AC 15 (for masterswitch) Microswitch 0,5 A 250 V AC 15 with knob-type and cable (for Pos. 22)
KBAD/193 KBAD/194
40 60
...00012 ...00013
B5 B 5D
...00014 ...00015 ...00016 ...00017 ...00018 ...00019 ...00020 ...00021 ...00022 ...00023
154
Industrial controllers
4/150
2005
The spindle block Pos. 1, 3 incorporates an internal gearing, control-handle with knob solid, bellow and boot clamp.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 4 7
right
8 6
Pos. 1 2 1-2 3 4 5 9 10 11 12 13 20 21 22 23 24 25 26 27 28 29 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 92
V 31 1 1-2 3
V3 1 4 2 3-4 (for open shifting) (prohibits diagonal shifting) (for e. H-gate) (for each direction) (for each direction)
Type V 31
Price EURO
KHC/180
1000
...00002
V3
Gate open-shaped Gate cross-shaped Gate special-shaped Spring return in 0-position Friction brake adjustable
KBKD ... KBKF ... KBKG ... KMFD/03 KMI/09 KHC/105 KHC/109 KHC/106 KHC/107 KHC/138 KHC/225 KHC/190 KHC/155
...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014 ...00015 ...00016
P P Z R M T H D DV B1 B 1T
Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 200, 160 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Boot clamp Gasket (for spindle block Pos. 1, 3) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Joint bracket (for Pos. 20-27) Notching (1 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Contact (center) 4 A 350 V AC 15 Contact (end) 4 A 350 V AC 15 with end-plate Microswitch (164) 2 A 250 V AC 15 with fixings and contact striker (for Pos. 22, 23, 24, 27)
KEQ/368
...00017 ...00018 ...00019 ...00020 ...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027 ...00028 ...00029 ...00020 ...00031
(P) (P)
155
Industrial controllers
4/160
2005
The spindle block Pos. 3-4 incorporates an internal gearing, control-handle with knob solid, bellow, frontplate and prepared for mounting the master switch.
The masterswitch Pos. 30-36 incorporates a cam shaft disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
1 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
left
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 92 93
156
D 64 1 3 1
DD 64 3
Drawing No.
Weight gramm
Type
Price EURO
1100 1100
...00002 ...00003
D 64 DD 64
KMFD/59 KMI/15 KHG/53 KHG/59 KHG/61 KHG/57 KHG/55 KHG/171 KHG/49 KHG/51
...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013 ...00014
Z R
Control-handle with knob solid with joint (for each direction for Pos. 20-28) Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with T-grip with joint Control-handle with T-grip, push button side 1 NO, cable and joint Control-handle long or short 160, 200 mm Master switch switching sequence 4-0-4 Direction 1-2 and 3-4 each master switch Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
M T H D DV Q QD
Switching sequence 5-0-5 or 6-0-6 Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows with boot clamp Front plate with 4 screws M 5 x 15 (for mounting the bellow) Gasket (for spindle block Pos. 3, 4) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) T-grip (for Pos. 26) Notching (2 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Contact set with 2 contacts 2 A 250 V AC 15 Contact set with 2 contacts 4 A 250 V AC 15 Microswitch (MZX1) 2 A 250 V AC 15 with fixings and contact striker (for Pos. 22, 23, 24) T-grip with push button side 1 NO 0,5 A 250 V AC 15 with cable (for Pos. 27)
...00015 ...00016 ...00017 ...00018 ...00019 ...00020 ...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027 ...00028 ...00029 ...00030 ...00031 ...00032 ...00033 ...00034 ...00035 ...00036 ...00037
01 02 03 04 05 06 (P) (P)
KMD 64 KGIC 349 KMD 86 KBAD 66 KBAD 148 KNK/81 KBUC 63 KBUC 63 KEA/33 KEA/44
KBAD 147
Industrial controllers
4/162
2005
The spindle block Pos. 3 incorporates an internal gearing, control-handle with knob solid, bellow and boot clamp.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
1 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
left
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 43 80 81 82 83 84 85 86 87 88 89 90 91 92 2 1
D8 3
Drawing No.
Weight gramm
Type
Price EURO
KHL/37 4
1000
...00001
D8
Spring return in 0-position (2 spring, 2 bolt) (for each direction) Friction brake adjustable (for each direction) Control-handle with knob solid with joint (for each direction for Pos. 20-28) Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with T-grip with joint Control-handle with T-grip, push button side 1 NO, cable and joint Control-handle long or short 180, 140 mm Potentiometer e.t.c. look catalog 1/240... Bellows with boot clamp Gasket (for spindle block Pos. 3) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) T-grip (for Pos. 26) Notching (1 notching lever with roll, 1 notching spring, 1 notching disk) KMD 64 KMD 96 KBAD 66 KBAD 148 KHL/107 KHL/109
...00002 ...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012
Z R
M T H D DV Q QD
Microswitch (V4N-GP) 0,5 A 110 V AC 15 (for masterswitch) Microswitch (V4N-GP) 0,5 A 110 V AC 15 with contact striker (for Pos. 22, 23, 24) T-grip with push button side 1 NO 0,5 A 250 V AC 15 with cable (for Pos. 27)
157
Industrial controllers
Notice
158
Industrial controllers
4/200
2005
The spindle block Pos. 1 incorporates an internal gearing, control-handle with knob solid, bellow, ring nut and prepared for mounting the master switch.
The master switch Pos. 30-36 incorporates a cam shaft, cam disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 1-2
S2 1
Type S2
Price EURO
Gate special-shaped for position view M. 1699 Spring return in 0-position Friction brake adjustable Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 5 with joint Control-handle with palm grip B 5 with push button top (mechanical parts) with joint Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Master switch switching sequence 5-0-5 Direction 1-2 or 3-4 Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
KMFD/58 KHS/167 KHS/118 KHS/122 KHS/119 KHS/120 KHS/177 KHS/646 KBAD/254 KBAD/311
60 20 20 50 50 50 50 60 60 40 60
...00002 ...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012 ...00013
P Z R
M T H D DV B5 B 5T
02 03 04 05
Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Ring nut (for mounting the bellow) Gasket (for spindle block Pos. 1) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Spare gear with bracket (for Pos. 20-27) Notching (2 notching lever with roll, 2 notching spring, 1 notching disk)
KHS/165
...00018 ...00019 ...00020 ...00021 ...00022 ...00023 ...00024 ...00025 ...00026 ...00027
(P) (P)
KHS/165
Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever and insulating disk (for Pos. 31-34) Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever, 2 insulating disks and contact striker (for Pos. 22, 23, 24, 27)
...00028 ...00029
159
Industrial controllers
4/202
2005
The spindle block Pos. 1 incorporates an internal gearing, control-handle with knob solid, bellow, frontplate and prepared for mounting the master switch.
The master switch Pos. 30-36 incorporates a cam shaft, cam disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91
160
S 21 1 1-2
Type S 21
Price EURO
Spring return in 0-position Friction brake adjustable Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 1 with joint Control-handle with palm grip B 1 with push button top (mechanical parts) with joint Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Master switch switching sequence 5-0-5 Direction 1-2 or 3-4 Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
KMFD/58 KHS/167 KHS/118 KHS/122 KHS/119 KHS/120 KHS/177 KHS/646 KBAD/22 KBAD/65
...00002 ...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012
Z R
M T H D DV B1 B 1T
02 03 04 05
Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Front plate with 4 screws M5 x 15 (for mounting the bellow) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Spare gear with bracket (for Pos. 20-27) Notching (2 notching lever with roll, 2 notching spring, 1 notching disk)
KHS/165
(P) (P)
KBAD 66 KHS/165
Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever and insulating disk (for Pos. 31-34) Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever, 2 insulating disks and contact striker (for Pos. 22, 23, 24, 27)
...00026 ...00027
Industrial controllers
4/204
2005
The spindle block Pos. 1 incorporates an internal gearing, control-handle with knob solid, bellow and ring nut.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 1-2
S 22 1
Type S 22
Price EURO
Spring return in 0-position Friction brake adjustable Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 5 with joint Control-handle with palm grip B 5 with push button top (mechanical parts) with joint Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Ring nut (for mounting the bellow) Gasket (for spindle block Pos. 1) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Spare gear with cam shaft (for Pos. 20-27) Notching (1 notching lever/notching disk with roll, 1 notching spring)
KMFD/58 KHS/167 KHS/118 KHS/122 KHS/119 KHS/120 KHS/177 KHS/646 KBAD/254 KBAD/311
20 20 50 50 50 50 60 60 40 60
...00002 ...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012
Z R
M T H D DV B5 B 5T
KHS/400
...00013 ...00014 ...00015 ...00016 ...00017 ...00018 ...00019 ...00020 ...00021 ...00022
(P) (P)
Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever and insulating disk (for master switch) Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever, 2 insulating disks and contact striker (for Pos. 22, 23, 24, 27)
...00023 ...00024
161
Industrial controllers
4/206
2005
The spindle block Pos. 1 incorporates an internal gearing, control-handle with knob solid, bellow and ring nut.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 1-2
SS 22 1
Type SS 22
Price EURO
Spring return in 0-position Friction brake adjustable Control-handle with knob solid with joint Control-handle with latch for mechanical zero interlock with joint Control-handle with dead mans button (mechanical parts) with joint Control-handle with signal button (mechanical parts) with joint Control-handle with push button (mechanical parts) with joint Control-handle with flat push button (mechanical parts) with joint Control-handle with palm grip B 5 with joint Control-handle with palm grip B 5 with push button top (mechanical parts) with joint Control-handle long or short 140, 100 mm More knobs, grips and T-grips with and without signal devices look catalog 1/228... Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240... Bellows Ring nut (for mounting the bellow) Gasket (for spindle block Pos. 1) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with shaft activities (for Pos. 21-25, 1 Pos. only) Spare gear with cam shaft (for Pos. 20-27) Notching (1 notching lever/notching disk with roll, 1 notching spring)
KMFD/58 KHS/167 KHS/507 KHS/506 KHS/508 KHS/505 KHS/504 KHS/646 KBAD/254 KBAD/311
...00002 ...00003 ...00004 ...00005 ...00006 ...00007 ...00008 ...00009 ...00010 ...00011 ...00012
Z R
M T H D DV B5 B 5T
KHS/400
...00013 ...00014 ...00015 ...00016 ...00017 ...00018 ...00019 ...00020 ...00021 ...00022
(P) (P)
Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever and insulating disk (for master switch) Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever, 2 insulating disks and contact striker (for Pos. 22, 23, 24, 27)
...00023 ...00024
162
Industrial controllers
4/208
2005
The spindle block Pos. 1 incorporates an internal gearing, control-handle with knob solid, bellow and ring nut.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91 1-2
S 23 1
Type S 23
Price EURO
Spring return in 0-position Friction brake adjustable Control-handle with knob solid Control-handle with latch for mechanical zero interlock
20 20 50 50
Z R
Control-handle with push button 1 NO with cable Control-handle with T-grip Control-handle long or short 160, 120 mm Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240...
50 40
D Q
KHS/400
...00009 ...00010
(P) (P)
Gasket (for spindle block Pos. 1) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with push button 1 NO with cable (for Pos. 24) Spare gear with cam shaft (for Pos. 20-27) Notching (1 notching lever/notching disk with roll, 1 notching spring) Gear joint (for Pos. 86) Microswitch (MZX1) 2 A 250 V AC 15 with roll-lever and insulating disk (for master switch)
163
Industrial controllers
4/216
2005
The spindle block Pos. 1 incorporates an internal gearing, control-handle with knob solid and prepared for mounting the master switch.
The master switch Pos. 30-36 incorporates a cam shaft, cam disks and contacts completely mounted together.
By all spare part orders it is necessary to inform us about the Work-No. (7 characters) on the switch gear.
Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image).
1 3
left
5 7 8
right
4 2
Pos. 1 2 3 4 5 10 11 12 13 14 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 41 42 43 80 81 82 83 84 85 86 87 88 89 90 91
S6 1
Type S6
Price EURO
Spring return in 0-position Friction brake adjustable Control-handle with knob solid
110 30 100
Z R
Control-handle with push button 1 NO with cable Control-handle with palm grip B 1 Control-handle with palm grip B 1 with push button top Control-handle long or short 265, 225 mm Master switch switching sequence 4-0-4 Direction 1-2 or 3-4 Switching program according contact-arrangement MS look catalog 5/001 or to your contact-arrangement
110 40 60
D B1 B 1D
Switching sequence 5-0-5 or 6-0-6 Prepared for mounting potentiometer shaft 6 mm adjusting angle 2 x 150 Prepared for mounting potentiometer e.t.c. adjusting angle variable More potentiometer e.t.c. look catalog 1/240...
01 02 03 04 05 06 (P) (P)
Gasket (for spindle block Pos.1) Gasket cap (for push button Pos. 24) Knob solid (for Pos. 20) Knob-type with push button 1 NO with cable (for Pos. 24) Notching (2 notching lever with roll, 1 notching spring, 1 notching disk) Cam disk without contact-arrangement Cam disk with contact-arrangement Contact set with 2 contacts 2 A 250 V AC 15 Contact set with 2 contacts 4 A 250 V AC 15
164
Industrial controllers
5/001
2005
Pos.
Type
4 3 2 1 0 1
Type
01
MS 11
03
A01
3 5
4 3 2 1
1 2
02
MS 12
3 2
03 02
12 A02
MS 214
2 20 4 40 6 60
A12
4 3 2 1
1 2 3
03
MS 13
3 2 4
03 02 04
A03
4 3 2 1 0 1 2 3 4
3 5 2 4 03 05 02 04
13
4 3 2 1 0 1 2 3 4
3 2 4 6 03 02 04 06
MS 224
A13
04
MS 14
A04
5 4 3 2 1
3 5 03 05 02 04 06 08
1 2 3 4 5
4 3 2 1
14 A05
MS 25
05
MS 21
3 5
03 05
2 4 6 8
A14
4 3 2 1
1 2
06
MS 22
3 5 2
03 05 02
6 5 4 3 2 1
1 2 3 4 5 6
A06
3 5
03 05 02 04 06 08 010
15
4 3 2 1 0 1 2
3 5 2 4 03 05 02 04
MS 26
2 4 5 8
A15
07
MS 212
A07
10
4 3 2 1
16
4 3 2 1
3 5 7 9 03 05 07 09
MS 0
01
A98
1 2
08
MS 222
A08
17
Contact-arrangement special
4 3 2 1
1 01
A99
0
4 3 2 1
1 2 3
18 A09 19
A...0
09
MS 23
3 5 2 4
03 05 02 04
-0 4 3 2 1
010
A...1
-1
4 3 2 1
3 5 03 05 02 020 04 040
1 2 3
M A S E
10
MS 213
2 20 4 40
4 3 2 1
3 5 03 05 02 04 06
1 2 3 4
- right 5 8 6 right
11
MS 24
2 4 6
Industrial controllers
Ordering information
5/002
2005
Customer___________________________________
1 Multi-axis controller Left / right Indicating label Black Engraved white Lettering height 3,5 mm 3
left
5 4 7
right
8 6
Direction 1-2 / 5-6 ____________________________________________ Switching program ___________________________________________ Drive ____________________________ Plant ref.__________________
Direction 3-4 / 7-8 _____________________________________________ Switching program ____________________________________________ Drive ______________________________ Plant ref.__________________
Switching sequence
Potentiometer
Potentiometer
Signal button H
Destination________________
Push button D
Gate cross-shaped
Industrial controllers
Ordering information
5/003
2005
Order No. _______________________________________________________________________ Type _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Colour _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Label text (max. 2 x 12 characters) ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ Plant ref. _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Destination _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Notes _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
No. of pieces max.
Position No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Maximum installation of command and indicating devices 22 (look 1/360) in our control units and housings if our multi-axis controllers V 62 (look 1/100) are used. Additional command and indicating devices can be installed if multi-axis controllers V 64 or V 11 (look 1/110) are used. (please enquire)
Control unit (look 2/020 ...) Type KST 2/3 KST 41/181 KST 42/182 KST 51/151 KST 52/54/152/154 KST 6 KST 7 KST 75
16 8 13 20 24 6 24 19
167
Industrial controllers
Ordering information
5/004
2005
Customer___________________________________ Position No. 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Type _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Colour _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
Order No. _______________________________________________________________________ Plant ref. _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Destination _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Notes _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
No. of pieces max.
Label text (max. 2 x 12 characters) ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________
Maximum installation of command and indicating devices 22 (look 1/360) in our control units and housings if our multi-axis controllers V 62 (look 1/100) are used. Additional command and indicating devices can be installed if multi-axis controllers V 64 or V 11 (look 1/110) are used. (please enquire)
25 - 30, 32 - 37, 39 - 42 25 - 29, 34 - 36 25 - 29, 32 - 36, 39 - 41 27 - 31, 34 - 38, 39 - 43, 44 - 48 25 - 48 27 - 28, 34 - 35, 39 - 40 25 - 48 25 - 43
168
16 8 13 20 24 6 24 19
Control unit (look 2/020 ...) Type KST 2/3 KST 41/181 KST 42/182 KST 51/151 KST 52/54/152/154 KST 6 KST 7 KST 75
Industrial controllers
5/005
2005
Order No. _______________________________________________________________________ Type _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Colour _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Label text (max. 2 x 12 characters) ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ Plant ref. _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Destination _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Notes _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
Position No. 1 2 3 4 5 Multi-axis controller V 64 (look 1/100) or V 11 (look 1/110) 6 7 8 Max. 3 pcs. installation of command and indicating devices 22 (look 1/360) Place to put on devices 9 10 11 12
Max. 6 pcs. installation of command and indicating devices 22 (look 1/360) or 1 pcs. monitoring device 72 x 72 mm
Equipment box right 13 14 Max. 6 pcs. installation of command and indicating devices 22 (look 1/360) or 1 pcs. monitoring device 72 x 72 mm Multi-axis controller V 64 (look 1/100) or V 11 (look 1/110) 15 16 17 18 19 20 Max. 3 pcs. installation of command and indicating devices 22 (look 1/360) Place to put on devices 21 22 23 24 _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
169
Industrial controllers
5/006
2005
Order No. _______________________________________________________________________ Type _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Colour _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Label text (max. 2 x 12 characters) ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ Plant ref. _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Destination _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Notes _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
Position No. 1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18
Maximum installation of command and indicating devices 22 (look 1/360) if our multi-axis controllers V 62 (look 1/100) are used. Additional command and indicating devices can be installed if multi-axis controllers V 64 or V 11 (look 1/110) are used. (please enquire) Pos. 1-8 alternative max. 2 pcs. monitoring devices 72 x 72 mm
19 20 21 22 23 24 25 26 27 28 29 30 31 32
170
Industrial controllers
5/007
2005
Customer___________________________________ Position No. 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 Type _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Colour _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
Order No. _______________________________________________________________________ Plant ref. _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Destination _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Notes _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ Equipment box right
Label text (max. 2 x 12 characters) ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________ ___________________
Maximum installation of command and indicating devices 22 (look 1/360) if our multi-axis controllers V 62 (look 1/100) are used. Additional command and indicating devices can be installed if multi-axis controllers V 64 or V 11 (look 1/110) are used. (please enquire) Pos. 35-42 alternative max. 2 pcs. monitoring devices 72 x 72 mm
171
Industrial controllers
Technical data
5/100
2005
Utilization categories for control switches to IEC 947-5-1 EN 60947 DIN VDE 0660-200. Type of current Utilization category Typical examples of application I = current made, Ic = current broken Ie = rated operational current, U = voltage before make Ue = rated operational voltage Ur = recovery voltage t 0,95 = time in ms, to reach 95% of the steady-state current. P = Ue Ie = steady-state power consumption in watts Control of resistive loads and solid state loads with isolation by opto couplers Control of a.c. electromagnetic loads (> 72 VA) Normal conditions of use Make I Ie U Ue cos Break Ic Ie Ur Ue cos
AC
AC 12 AC 15
1 10 I Ie 1
1 1 U Ue 1
1 1 Ic Ie 1
1 1 Ur Ue 1
Control of resistive loads and solid state 1 ms 1 ms loads with isolation by opto couplers DC 13 Control of d.c. electromagnets 1 1 6P 1 1 6P The value 6 P results from an empirical relationship with is found to represent most d.c. magnetic loads to an upper limit of P = 50 W viz 6 P = 300 ms. Loads having power consumption greater than 50 W are assumed to consist of smaller loads in parallel. Therefore 300 ms is to be an upper limit, irrespective of the power consumption value. Attach our switching device Rated isolation voltage in Volt Ui V6 S6 250 N6 VV 6 DD 64 250 V 11 V5 VV 5 V8 S 2- S 23 SS 2-SS 21 D 8 250 250 110 VV 8 D3 S3 110 V 10 V3 dead mans button signal button push button 250
DC
DC 12
250
110
500
Rated operational voltage Ue in Volt Rated operational current Ie in Ampere AC 12 AC 15 DC 12 24 V 48 V 110 V 220 V 24 V 24 V 48 V 110 V 220 V
250
250
250
250
250
110
110
110
350
250
6 or 10
6 or
10
6 or
10
10
Contacts gold-coated DC 13
6 6
10 10
6 6
10 10
6 6
10 10
4 4
4 4
4 4
M 3,5
M 3,5
M 3,5
Solder terminal
1,5 Conductor sizes in mm2 finely stranded with end steeves Mechanical life in million (operation cycles) 10 max. switching frequency c/h 1000 Mechanical shock resistance to IEC 68-2-27 Clear ances and creepage distances to IEC 947-1; 2.5.46.51 Degree of protection to IEC 529 DIN 40050
1,5
1,5
0,5
0,5
0,5
20
10
10
12
10
Shock-amplitude > 15
Shock duration 20 ms
Overvoltage category III pollution grade 3 1. numerial protection of contact and foreign bodies No protection Protection deposits of dust Protection complete of dust Protection complete of dust 2. numerial protection of water No protection Protection splashing of water Protection hosed of water Protection hosed strong of water
IP 00 IP 54 IP 65 IP 66
172
Industrial controllers
W. Gessmann GmbH Postfach 11 51 74207 Leingarten Eppinger Strae 221 74211 Leingarten
Tel. Nat 0 71 31 - 40 67-0 Fax Nat 0 71 31 - 40 67-10 Tel. Int +49 71 31 - 40 67-0 Fax Int +49 71 31 - 40 67-10 E-mail gessmann@gessmann.com Internet www.gessmann.com
5/900
2005
GB
United Kingdom
Cavotec Ltd. Stirling Way Market Deeping Lincolnshire PE6 8AS Telephone +44-17 78 / 34 67 69 Telefax +44-17 78 / 34 18 50 E-mail hans.winemar@cavotec.com Internet www.cavotec.com Cavotec Hong Kong Ltd Flat 04C, 17F, Fo Tan Industrial Centre 26-28 Au Pui Wan Street Fo Tan, Shatin N. T. Hong Kong Telephone +852 279 16 161 Telefax +852 279 11 834 E-mail leungg@cavotec.com.hk Internet www.cavotec.com S.P.I.I. Societ per Azioni Via Volpi, 37, 21047 Saronno Telephone +39-02 / 9 62 29 21 Telefax +39-02 / 9 60 96 11 E-mail info@spii.it Internet www.spii.it Arihant Systems P Limited 24/4866 Ansari Road Daryaganj New Delhi - 110002 Telephone +91-11-23 26 90 11 Telefax +91-11-23 27 35 54 E-mail info@arihantelectricals.com Internet www.arihantelectricals.com Tha Kyung Metronics Inc. RM 1231 LG-ECAT 736-24 YUKSAM-DONG KANGNAM-KU, Seoul Telephone +822-568-6534 Telefax +822-568-6535 E-mail thakyung@unitel.co.kr ALMESA Alimentaciones Electricas S.A. DEC.V KM 117.3 Autopista Mexico Puebla Puebla, Pue Telephone +52-222 / 210 50 93 Telefax +52-222 / 210 50 69 E-mail almesa@mexis.com Internet www.almesa.com.mx
PL
Poland
ELEKTRO-TRADING ul.Mechanikow 9 44-109 Gliwice, Poland Telephone +48-32 / 734 55 72 Telefax +48-32 / 734 55 70 E-mail et@elektro-trading.com.pl Kiepe Elektriska AB Lodgatan 4, 21124 Malm Telephone +46-40 / 29 15 55 Telefax +46-40 / 29 12 31 E-mail kiepe@kiepe.se Internet www.kiepe.se My Port (M) SDN BHD #04-01/03, 4th Floor, Wisma PTP, Block B Jalan Pelabuhan Tanjung Pelepas Gelang Patan 81560 Johor Darul Takzim Telephone +60-7-50 71 799 Telefax +60-7-50 71 798 E-mail arfah@my-port.net Internet www.my-port.net Arda Makina Elektrik Tic. Ve San, Ltd. Sti, 100, Yil Bulvari 42. Sok, No: 1 Ostim / Ankara Telephone +90 312 385 80 37 (PBX) Telefax +90 312 385 80 58 E-mail arda@ardaelektrik.com Internet www.ardaelektrik.com OEM Controls, inc. 10 Controls Drive Shelton, Conn. 06484 Telephone +1-2 03 / 9 29-84 31 Telefax +1-2 03 / 9 29-38 67 E-mail ksimons@oemcontrols.com Internet www.oemcontrols.com Crane masterswitches Operators chairs and consoles: Cavotec, inc. 124 Hatfield Road Statesville, NC 28625 Telephone +1-7 04-8 73-30 09 Telefax +1-7 04-8 73-30 93 E-mail erik.wilhelmsen@cavotec.com Internet www.cavotec.us
SE HK
Hongkong Sweden
AR
Argentina
SG
Singapore
AU
Australia
TH
Thailand
IT
Italy
MY
Malaysia
ID
Indonesia
CA
Canada
TR IN
India Turkey
CH ELVA AG Switzerland Werbhollenstrasse 54 4143 Dornach 2 Telephone +41-61 / 7 06 85 90 Telefax +41-61 / 7 06 85 91 E-mail info@elva.ch Internet www.elva.ch CN
China Cavotec Shanghai Ltd. Unit 3, No. 879 ShenFu Road Xinzhuang Industrial Zone Minhang District Shanghai 201108 Telephone +86 21 54 42 97 78 Telefax +86 21 34 07 42 55 E-mail phileas@cavotec.com.cn Internet www.cavotec.com Ib Baastrup AS Dronning Olgas Vej 30 2000 Frederiksberg Telephone +45-38 / 10 21 29 Telefax +45-38 / 10 29 69 E-mail info@baastrup.com Internet www.baastrup.com Kentek Oy Postbox 18, 01721 Vantaa Tiilenlyjnkuja 4, 01721 Vantaa Telephone +3 58-9 / 8 49 42 00 Telefax +3 58-9 / 84 94 20 59 E-mail kentek@kentek.fi Internet www.kentek.fi Logsys Engineering 8 route d'Altkirch, 68720 Illfurth Telephone +33-3 / 89 25 54 32 Telefax +33-3 / 89 25 51 32 E-mail rbigenwald@free.fr Internet www.logsys.net
KR
Korea
US
United States
MX
Mexico
DK
Denmark
FI
Finnland
NO
Norway
YU
Cavotec Norge, AS Box 838, 3007 Drammen Rosenkrantzgt 75, 3018 Drammen Telephone +47-32 / 26 45 00 Telefax +47-32 / 26 45 10 E-mail info@cavotec.no Serbia
TGT Veljka Vlahovi c a 34 YU-11550 Lazarevac Telephone +381-11-8122-665 Telefax +381-11-8122-665 E-mail vidicb@EUnet.yu
FR
France
NL Albert van der Perk BV Netherlands Stolwijkstraat 33, 3079 DN Rotterdam Telephone +31 10 / 4 22 65 77 Telefax +31 10 / 4 22 20 26 E-mail info@perk-elektrotechniek.nl Internet www.perk-elektrotechniek.nl
ZA Powermite Africa PTY Ltd. South Africa P.O.Box 7745, Johannesburg 2000 92, Main Reef Road Technikon Roodeport 1724 Telephone +27-11-2 71-00 00 Telefax +27-11-7 60-30 99 E-mail Powermite.jhb@global.co.za Internet www.powermite.co.za