Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 507 views

    TM 55-1520-210-CL PDF

    Uploaded by

    Eagle1968
    This document provides checklists for operating and maintaining UH-1H/V helicopters. It outlines procedures for pre-flight checks of systems, engine start up and shut down, flight procedures, and emergency procedures. The checklists include steps to check fluid levels, run engine diagnostics, verify equipment is secure, and set switches and circuit breakers in preparation for engine start up, take-off, landing, and securing the helicopter. Emergency procedures provide guidance for issues like engine or electrical malfunctions, fires, hydraulic or transmission failures, and ditching the helicopter.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    TM 55-1520-210-CL PDF

    Uploaded by

    Eagle1968
    507 views5 pages
    This document provides checklists for operating and maintaining UH-1H/V helicopters. It outlines procedures for pre-flight checks of systems, engine start up and shut down, flight procedures, and emergency procedures. The checklists include steps to check fluid levels, run engine diagnostics, verify equipment is secure, and set switches and circuit breakers in preparation for engine start up, take-off, landing, and securing the helicopter. Emergency procedures provide guidance for issues like engine or electrical malfunctions, fires, hydraulic or transmission failures, and ditching the helicopter.

    Original Description:

    TMs

    Original Title

    TM 55-1520-210-CL.pdf

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides checklists for operating and maintaining UH-1H/V helicopters. It outlines procedures for pre-flight checks of systems, engine start up and shut down, flight procedures, and emergency procedures. The checklists include steps to check fluid levels, run engine diagnostics, verify equipment is secure, and set switches and circuit breakers in preparation for engine start up, take-off, landing, and securing the helicopter. Emergency procedures provide guidance for issues like engine or electrical malfunctions, fires, hydraulic or transmission failures, and ditching the helicopter.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    507 views5 pages

    TM 55-1520-210-CL PDF

    Uploaded by

    Eagle1968
    This document provides checklists for operating and maintaining UH-1H/V helicopters. It outlines procedures for pre-flight checks of systems, engine start up and shut down, flight procedures, and emergency procedures. The checklists include steps to check fluid levels, run engine diagnostics, verify equipment is secure, and set switches and circuit breakers in preparation for engine start up, take-off, landing, and securing the helicopter. Emergency procedures provide guidance for issues like engine or electrical malfunctions, fires, hydraulic or transmission failures, and ditching the helicopter.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    UH-1H/V Helicopters TM 55-1520-210-CL

    13 February 1997
    This manual supersedes TM 55-1520-210-CL, 27 December 1990, including all changes.

    TM 55-1520-210-CL
    7. Engine and transmission oil pressure - Check. 8. GPU - Disconnect. 6. 7. 8. 9. Engine compartment - Check. Hydraulic fluid sight gage - Check. Armament system - Check. Main rotor system - Check.

    ENGINE RUNUP
    1. Avionics - On. 2. STARTER GEN switch - STBY GEN. 3. Systems - Check. 4. RPM - 6600. 5. Deleted. 6. Avionics and flight instruments - Check and Set. 7. HIT check - Perform.

    INTERIOR CHECK - CABIN


    1. Transmission oil level - Check. 2. Cabin area - Check. 3. Crew and passenger briefing - Complete.

    HELICOPTER AND SYSTEMS


    1. Covers, locking devices, tiedowns, and cables - Remove except main rotor tiedown. 2. Publication - Check. 3. AC circuit breakers - In. 4. BAT switch - ON; Check voltage. 5. Lights - On; check, then off. 6. Fuel - Check quantity. 7. Fuel sample - Check as required. 0 8 . Cargo book - Check as required. 9. BAT switch - OFF. 10. Flight Controls - Check.

    BEFORE STARTING ENGINE


    1. 2. 3. 4. 1. 2. 3. 4. 5. 6. 7. 8. 1. 2. 3. 4. 5. 6. EXT LTS switches - Set. BAT switch - ON. GPU - Connect for GPU start. FUEL switches - Set. Fire guard - Posted if available. Rotor blades - Check clear and united. Ignition key lock switch - On. Throttle - Set for start. Engine - Start. INVTR switch - MAIN ON. Engine and transmission oil pressures - Check. GPU - Disconnect. Avionics - ON. STARTER GEN switch - STBY GEN. Systems - Check. RPM - 6600. Deleted. Avionics and flight instruments - Check and set.

    HOVER/TAXI CHECK
    1. Engine and transmission instruments - Check. 2 Flight instruments - Check. 3. Power - Check as required.

    STARTING ENGINE

    BEFORE TAKEOFF
    1. RPM - 6600. 2 Systems - Check. 3. Avionics - As required. 4. Crew, passengers, and mission equipment - Check.

    BEFORE LANDING
    1. RPM - 6600. 2 Crew, passengers, and mission equipment - Check.

    EXTERIOR CHECK
    1. 2. 3. 04. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Main rotor blade - Check. Fuselage (Area 1) - Check. Fuselage (Area 2) - Check. Armament systems - Check. Engine compartment - Check. Tail boom - Check. Tail rotor - Check. Main rotor blade - Check. Tail rotar gearboxes - Check. Tail boom - Check. Engine exhaust/smoke generator - Check. Oil cooling fan and heat compartments - Check. Engine compartment - Check. Hydraulic fluid sight gage - Check. Fuselage - Check. Main rotor system - Check. Transmission area - Check.

    ENGINE SHUTDOWN
    1. Throttle - Idle two minutes. 2. FORCE TRIM switch - ON. NOTE: Steps 3 through 7 are for the last flight of the day if not used. 3. PITOT HTR - Check. 4. INVTR switch - OFF, then SPARE. 5. AC voltmeter - Check. 6. MAIN GEN switch - OFF; check DC volts. 7. MAIN GEN switch - ON. 8. STARTER GEN switch - START. 9. Throttle - OFF. 10. Center pedestal switches - OFF. 11. Overhead switches - OFF. 12 Ignition key lock switch - As required.

    ENGINE RUNUP

    HOVER/TAXI/CHECK
    1. Engine and transmission instruments - Check. 2. Power - Check as required.

    BEFORE TAKEOFF
    1. RPM - 6600. 2. Systems - Check. 3. Avionics - AS required. 4. Crew, passengers and mission equipment - Check.

    INTERIOR CHECK - CABIN


    1. Transmission Oil level - Check. 2. Cabin area - Check. 3. Crew and passenger briefing - Complete.

    BEFORE LEAVING THE HELICOPTER


    1. Walk-around - Complete. 2 Mission equipment - Secure. 3. Complete DA Forms 2408-12 and 2408-13. 4. Secure helicopter.

    By Order of the Secretary of the Army:

    BEFORE STARTING ENGINE


    1. 2. 03. 4. 5. 6. 7. 8. 9. 1. 2. 3. 4. 5. 6. Overhead switches and circuit breakers - Set. GPU - Connect for GPU start. Smoke gage - Check. FIRE warning indicator light - Test. Press to test caution/warning lights. System instruments - Check. Center pedestal switches - Set. Flight controls - Check. Altimeters - Set. Fireguard - Posted if available. Rotor blades - Check clear and untied. Ignition key lock switch - On. Throttle - Set for start. Engine - Start. INVTR switch - MAIN ON.

    THROUGH-FLIGHT CHECKLIST
    BEFORE EXTERIOR CHECKS
    1. Covers, locking devices, tiedowns, and cables - Removed. 2. Fuel - Check quantity.

    DENNIS J. REIMER General, United States Army Chief of Staff

    EXTERIOR CHECK
    1. 2. 3. 4. 5. Main rotor blade - Check. Armament systems - Check. Tail rotor - Check. Main rotor blade - Check. Tail rotor gearboxes - Check.

    STARTING ENGINE

    Administrative Assistant to the Secretary of the Army


    03304

    To be distributed in accordance with DA Form 12-31-E, block no. 0668, requirements for TM 55-1520-210-CL

    TM 55-1520-210-CL EMERGENCY PROCEDURES


    ENGINE MALFUNCTION - HOVER
    Autorotate.

    FIRE FLIGHT
    a. Power- On. 1. Land as soon as possible. 2. EMER SHUTDOWN after landing. b. Power - Off. 1. Autorotate. 2. EMER SHUTDOWN.

    FUEL SYSTEM FUEL BOOST PUMP FAILURE


    If both FUEL BOOST caution lights illuminate: 1. Check fuel pressure. If fuel pressure is zero: 2. PA - 4600 ft or less. 3. Land as soon as practicable.

    ENGINE MALFUNCTION - LOW ALTITUDE/LOW AIRSPEED OR CRUISE


    1. Autorotate. 2. EMER GOV OPNS.

    ELECTRICAL FIRE - FLIGHT


    1. BAT. STBY. MAIN GEN switches - Off. 2. Land as soon as possible. If landing cannot be made: 3. Circuit breakers - Out. As each of the following steps are accomplished, check for source of fire. 4. MAIN GEN switch - ON. 5. STARTER GEN switch - STBY GEN. 6. BAT switch - ON. 7. Circuit breakers - In one at a time in priority required. GEN & BUS REST first. When malfunctioning circuit is identified, pull applicable circuit breaker.

    ENGINE RESTART - DURING FLIGHT


    1. Throttle - Off. 2. STARTER GEN switch - START. 3. FUEL switches - ON. 4. GOV switch - EMER. 5. Attempt start. 6. Land as soon as possible.

    ELECTRICAL SYSTEM MAIN GENERA-OR MALFUNCTION


    1. GEN & BUS RESET circuit breaker - In. 2 MAIN GEN switch - RESET then ON. If main generator is not restored or if it goes off again: 3. MAIN GEN switch - OFF.

    DROOP COMPENSATOR FAILURE


    EMER GOV OPNS.

    DITCHING DITCHING - POWER ON


    1. 2. 3. 4. 5. 6. Cockpit doom - Jettison at a hover. Cabin doors - Open. Crew (except pilot) and passengers - Exit. Hover a safe distance away from personnel. Throttle - Off and autorotate. Pilot - Exit when main rotor has stopped.

    ENGINE COMPRESSOR STALL


    1. Collective - Reduce. 2. DE-ICE and BLEED AIR switches - OFF. 3. Land as soon as possible.

    OVERHEAD BATTERY
    1. BAT switch - OFF. 2. Land as soon as possible. 3. EMER SHUTDOWN after landing.

    ENGINE OVERSPEED
    1. Collective - Increase. 2. Throttle - Reduce. 3. EMER FOV OPNS.

    DITCHING - POWER OFF


    1. Cockpit Doors - Jettison prior to entering water. 2. Cabin Doors - Open prior to entering water. 3. Exit when main rotor has stopped.

    TRANSMISSION AND DRIVE SYSTEM MALFUNCITONS TRANSMISSION OIL - HOT OR LOW PRESSURE
    1. Land as soon as possible. 2. EMER SHUTDOWN after landing.

    SMOKE AND FUME ELIMINATION - COCKPIT AND CABIN


    Doors, Windows, and Vents - Open.

    HYDRAULIC HYDRAULIC POWER FAILURE


    1. Airspeed - Adjust. 2. HYD CONT circuit breaker - Out. If hydraulic power is not restored. 3. HYD CONT circuit breaker - In. 4. HYD CONT switch - OFF. 5. Land as soon as possible

    TABLE - CAUTION LIGHTS


    LIGHT MASTER CAUTION CORRECTIVE ACTION Check the CAUTION panel for the condition. If master caution only (no segment light): Land as soon as possible. INT AUX FUEL switches - OFF. See emergency procedure. Switch to other inverter. Close door. Land as soon as possible. Land as soon as possible. Land as soon as possible. Land as soon as possible. Land as soon as practicable. Land as soon as practicable. Information/system status. Land as soon as possible. Land as soon as possible. Information/system status. Land as soon as possible. Land as soon as possible. Land as soon as possible. Land as soon as practicable. Land as soon as practicable.

    COMPLETE LOSS OF TAIL ROTOR THRUST


    1. In-flight - Autorotate. 2. Hover - Autorotate.

    MAIN DRIVESHAFT FAILURE


    1. Autorotate. 2. EMER SHUTDOWN.

    CONTROL STIFFNESS
    1. HYD CONT switch - OFF then ON. If control response is not restored: 2. HYD CONT switch - OFF. 3. Land as soon as practicable.

    CLUTCH FAILS TO DISENGAGE


    1. Throttle - ON. 2. Land as soon as possible.

    CLUTCH FAILS TO RE-ENGAGE


    1. Autoratote. 2. EMER SHUTDOWN.

    FLIGHT CONTROL SERVO HARDOVER


    1. HYD CONT switch - select opposite position. 2. Land as soon as possible.

    COLLECTIVE BOUNCE
    1. Relax pressure. 2. Make a significant collective application. 3. Increase collective friction.

    FLIGHT CONTROL/MAIN ROTOR SYSTEM MALFUNCTIONS


    1. Land as soon as possible. 2. EMER SHUTDOWN after landing.

    FIRE FIRE ENGINE START


    1. Start switch - Press. 2. Throttle - Off. 3. FUEL switches - OFF.

    MAST BUMPING
    1. Reduce severity of maneuver. 2. Land as soon as possible.

    FIRE GROUND EMER SHUTDOWN


    *U.S. GOVERNMENT PRINTING OFFICE: 1997-554-121/60021

    AUX FUEL Low DC GENERATOR INST INVERTER EXTERNAL POWER XMSN OR PRESS XMSN OR HOT ENGINE INLET AIR CHIP DETECTOR FUEL BOOST 20-MIN FUEL IFF ENG OIL PRESS ENG CHIP DET GOV EMER ENG ICE DET ENG FUEL PUMP ENG ICING FUEL FILER HYD PRESSURE SPARE

    PIN: 022121-000

    THE METRIC SYSTEM AND EQUIVALENTS

    PIN:

    022121-000

    You might also like