Discussed in Full Class - Discussed With A3, A4 - Yet To Be Discussed

TUTORIAL-1
Date:12-08-13
Discussed in full class Discussed with A3,A4 Yet to be discussed 0.1mm2 if the wire is made of material having a resistivity/specific resistance of 8010-8 -m.(800 )
1. Calculate the resistance of a 100m length of wire having a uniform cross-sectional area of
2. Calculate the resistance of a 100 m length of a wire having a uniform area of 0.1 mm2 if the wire is made of manganin having a resistivity of 50-cm.(500 ) 3. If the wire is drawn out to three times its original length , by how many times would you expect its resistance to be increased ?(9 times) 4. A platinum coil has a resistance of 3.146 at 40C and 3.767 at 100C. Find the resistance at 0C and the temperature-coefficient of resistance at 40C. (Ans. R0=2.732, 40=1/304 per C ) 5. Find the resistance of a 2000 km cable at 20oC, having a diameter of 0.7 cm. assume specific resistance of copper at 20oC as (Ans:896.01 ) 6. A loading of 5 kW in a heating unit is to be maintained. At an initial temperature of 15C, a voltage of 200 V is necessary for this purpose. When the unit settles at a steady temperature, a voltage of 220 V is required to maintain the same loading. Estimate the final temperature of the heating element, if the resistance temperature coefficient of the heating element is 0.0006 per C at 0C.(368.31C) 7. Two wires of aluminium and copper have the same resistance and same length. Which of these two is lighter? Density of copper is 8.9*103 kg/m3 and that of aluminium is 2.7*103 kg/m3. The resistivity of copper of 1.72*10-8 -m and that aluminium is 2.6*10-8 -m. (Ans: ma/mc = 0.46 aluminium wire is lighter than copper) 8. Calculate the resistance of copper tube 0.5cm thick and 2m long. The external diameter is 10cm. Given that the resistance of copper wire is 1 m long and 1mm2 in cross section is 1/58 . (Ans. 23.11) for 1 m length and 1mm2 cross-section.
26-08-13 9. Each second 1017 electrons flow from right to left across a cross section of a wire attached to the two terminals of a battery. Calculate the magnitude and direction of conventional current in the wire. (Ans. 0.016A , left to right) 10. If a current of 2 A flows for 2 minutes, find the quantity of charge transferred.(240 coulombs) 11. Calculate the potential difference of an energy source that provides 50 mJ of energy every for every micro coulomb of charge that flows. (Ans. 50000V ) 12. A source of 5 V supplies a current of 3 A for a period of 10 minutes. How much energy is provided in this time. (9000 J) 13. An electronic heater consumes 1.8 MJ of energy, when connected to a 250 V supply for 30 minutes. Find the power rating of the heater and the current taken from the supply.(1 kW, 4 A) . Hint: power =voltagecurrent. 14. Determine the resistance and the power dissipation of the resistor that must be placed in series with 75 ohm resistor across 120V source in order to limit the power dissipation in the 75 ohm resistor to 90W. (Ans. 34.6, 41.5W) 15. Determine the current supplied by the source in the circuit of figure. (Ans. 28.44A)
16. (a) Consider a seriesparallel combination of resistors as shown in Figure (a). Find the equivalent resistance as seen from terminals AB. (b) Determine the current I and power P delivered by a 10-V dc voltage source applied at terminals AB, with A being at higher potential than B. (c) Replace the voltage source by an equivalent current source at terminals AB.
(d) Show the current and voltage distribution clearly in all branches of the original circuit configuration. (Ans. 2)
17. Find the unknown currents marked in figure shown. (Ans. I1=30A, I2=35A, I3=-90A, I4=105A, I5=80A)
18. A 100V, 60W bulb is connected in series with a 100V, 100W bulb and the combination is connected across 200V mains. Find the value of the resistance that should be connected in parallel with the first bulb so that each bulb may get rated current at rated voltage. (Ans. 250) 19. Find the voltage drop across 1 resistor and power loss across 2 resistor. (Ans. 30.4W,2.21V)
20. Given the network in Figure, (a) Find the currents through resistors R1, R2, and R3. (b) Compute the voltage V1. (c) Show that the conservation of power is satisfied by the circuit.
21. Use deltawye transformation for network reduction and determine the current through the 12 resistor in the circuit of Figure. (Ans. 4.5A)
22. Calculate VAB for the network shown in Figure. (Ans. 3.5V)
23. Determine VAB in the network shown in Figure. (Ans. - 2V)
24. A network is arranged as in Fig. C. Calculate the equivalent resistance between (a) A and B, and (b) A and N. ( Ans. 2.87ohm and 0.98 ohm)
1. (a) Calculate the reactance of a coil of inductance 0.32 H when it is connected to a 50 Hz supply. (b) A coil has a reactance of 124 ohm in a circuit with a supply of frequency 5 kHz. Determine the inductance of the coil. [100.5 ohm, 3.95 mH]
2. A coil has an inductance of 40 mH and negligible resistance. Calculate its inductive reactance and the resulting current if connected to (a) a 240 V, 50 Hz supply, and (b) a 100 V, 1 kHz supply. [12.57ohm, 19.09 A, 251.3 ohm, 0.398 A]
3. Determine the capacitive reactance of a capacitor of 10 F when connected to a circuit of frequency (a) 50 Hz (b) 20 kHz [318.3 ohm, 0.796 ohm]
4. Given the sinusoid 5 sin(4t 60) calculate its amplitude, phase, angular frequency, period, and frequency. [Answer: 5, -60, 12.57 rad/s, 0.5 s, 2 Hz.] 5. Calculate the current taken by a 23 F capacitor when connected to a 240 V, 50 Hz supply. [1.73A] 6. In a series RL circuit the p.d. across the resistance R is 12 V and the p.d. across the inductance L is 5 V. Find the supply voltage and the phase angle between current and voltage. [13 V, 22.37 lagging]
7. A coil has a resistance of 4 ohm and an inductance of 9.55 mH. Calculate (a) the reactance, (b) the impedance, and (c) the current taken from a 240 V, 50 Hz supply. Determine also the phase angle between the supply voltage and current [Ans: 3 Ohm, 5 Ohm, 48 A, 36.56 lagging] 8. Three circuits A,B and C are connected in series across a 200 V supply. The voltage across circuit A is 50 V lagging the supply voltage by 45 and circuit C is 100 V leading the supply voltage by 30. Determine the voltage across the circuit B and its phase relationship with supply voltage. [Ans: 79.4V, 10.38 lagging] 9. An e.m.f. of 200 V at a frequency of 2 kHz is applied to a coil of pure inductance 50 mH. Determine (a) the reactance of the coil, and (b) the current flowing in the coil. [628 ohm, 0.318A] 10. Two similar capacitors are connected in parallel to a 200 V, 1 kHz supply. Find the value of each capacitor if the circuit current is 0.628 A. [0.25 microF] 11. A voltage of 35 V is applied across a CR series circuit. If the voltage across the resistor is 21 V, find the voltage across the capacitor. [28V]

Discussed in Full Class - Discussed With A3, A4 - Yet To Be Discussed

Uploaded by

Copyright:

Available Formats

Discussed in Full Class - Discussed With A3, A4 - Yet To Be Discussed

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Discussed in Full Class - Discussed With A3, A4 - Yet To Be Discussed

Uploaded by

Copyright:

Available Formats

TUTORIAL-1

23. Determine VAB in the network shown in Figure. (Ans. - 2V)

You might also like