Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
212 views

Assignment 7

This document contains 17 questions regarding AC circuits involving resistors, capacitors, and inductors. The questions cover topics such as calculating reactance of coils and capacitors at different frequencies, determining current, voltage and power in circuits containing resistors and reactive components connected to AC supplies, determining unknown component values from given circuit information, and drawing phasor diagrams.

Uploaded by

Pavan Khetrapal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
212 views

Assignment 7

This document contains 17 questions regarding AC circuits involving resistors, capacitors, and inductors. The questions cover topics such as calculating reactance of coils and capacitors at different frequencies, determining current, voltage and power in circuits containing resistors and reactive components connected to AC supplies, determining unknown component values from given circuit information, and drawing phasor diagrams.

Uploaded by

Pavan Khetrapal
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

TRUBA COLLEGE OF SCIENCE AND TECHNOLOGY BHOPAL

DEPARTMENT: EX
ASSIGNMENT SHEET No:
DATE OF GIVEN:
DATE OF SUBMISSION:
INSTRUCTOR: Pavan Khetrapal
TOPIC: Single

COURSE: B.E

BRANCH: EC and EX
SEMESTER: I / II
SUBJECT NAME AND CODE: BEEE / BE-104

Phase Series AC Circuits

Ques1: (a) Calculate the reactance of a coil of inductance 0.32 H when it is connected to a 50 Hz supply. (b) A coil has
a reactance of 124 ohm in a circuit with a supply of frequency 5 kHz. Determine the inductance of the coil.
Ques2: A coil has an inductance of 40 mH and negligible resistance. Calculate its inductive reactance and the resulting
current if connected to (a) a 240 V, 50 Hz supply, and (b) a 100 V, 1 kHz supply.
Ques3: Determine the capacitive reactance of a capacitor of 10 microfarad when connected to a circuit of frequency (a)
50 Hz (b) 20 kHz
Ques4: A coil of inductance 80 mH and resistance 60 ohm is connected to a 200 V, 100 Hz supply. Calculate the circuit
impedance and the current taken from the supply. Find also the phase angle between the current and the supply voltage.
Ques5: An alternating voltage given by v = 100 sin 240t volts is applied across a coil of resistance 32 ohms and
inductance 100 mH. Determine (a) the circuit impedance, (b) the current flowing, (c) the p.d. across the resistance, and (d)
the p.d. across the inductance.
Ques6: A coil takes a current of 5 A from a 20 V d.c. supply. When connected to a 200 V, 50 Hz a.c. supply the current
is 25 A. Calculate the (a) resistance, (b) impedance and (c) inductance of the coil
Ques7: A voltage of 35 V is applied across a CR series circuit. If the voltage across the resistor is 21 V, find the
voltage across the capacitor.
Ques8: An alternating voltage v = 250 sin 800 t volts is applied across a series circuit containing a 30 ohms resistor and
50 microfarad capacitor. Calculate (a) the circuit impedance, (b) the current flowing, (c) the p.d. across the resistor, (d)
the p.d. across the capacitor, and (e) the phase angle between voltage and current.
Ques9: A 40 microfarad capacitor in series with a coil of resistance 8 ohms and inductance 80 mH is connected to a
200 V, 100 Hz supply. Calculate (a) the circuit impedance, (b) the current flowing, (c) the phase angle between voltage
and current, (d) the voltage across the coil, and (e) the voltage across the capacitor.
Ques10: Three impedances are connected in series across a 100 V, 2 kHz supply. The impedances comprise:
i.
an inductance of 0.45 mH and 2 ohms resistance,
ii.
an inductance of 570 H and 5 ohms resistance, and
iii.
a capacitor of capacitance 10 F and resistance 3 ohms.
Assuming no mutual inductive effects between the two inductances calculate (a) the circuit impedance, (b) the circuit
current, (c) the circuit phase angle and (d) the voltage across each impedance. Draw the phasor diagram.
Ques11: A voltage v = 200 sin wt volts is applied across a pure resistance of 1.5 kiloohms. Find the power dissipated
in the resistor.
Ques12: Determine the current that flows through an 8 ohm resistor connected to a voltage source vs = 110 cos 377t V.
Ques13: What is the instantaneous voltage across a 2-Fcapacitor when the current through it is i = 4 sin(106t + 250)
A?
Ques14: A current source of i(t) = 10 sin(377t + 30) A is applied to a single-element load. The resulting voltage across
the element is v(t) = 65 cos(377t + 1200) V. What type of element is this? Calculate its value.
Ques15: Two elements are connected in series as shown in figure below If i = 12 cos(2t 300) A, find the element
values.

Ques16: The power taken by a series circuit containing resistance and inductance is 240 W when connected to a 200 V,
50 Hz supply. If the current flowing is 2 A find the values of the resistance and inductance.

Ques17: An 80 ohms resistor and a 6microfarad capacitor are connected in series across a 150 V, 200 Hz supply.
Calculate (a) the circuit impedance, (b) the current flowing and (c) the power dissipated in the circuit.

You might also like